Cold saws
KALTENBACH KKS 400

Name: KALTENBACH KKS 400
Brand: KALTENBACH
Availability: InStock

Condition

Used

Location

Barsbüttel Germany

Show map

Machine data

Machine type:: Cold saws

Manufacturer:: KALTENBACH

Model:: KKS 400

Condition:: used

Price & Location

Location:: Industriestr. 6, 22885 Barsbüttel/Hamburg, Deutschland

Call

Details about the offer

Listing ID:: A146-56051

Update:: 11.04.2024

Description

1 used cold sawing machine KALTENBACH KKS 400

Technical data:
Saw blade diameter: 400 mm
Cutting diameter: 130 mm
Cutting area flat: 315x40 mm
Cutting area square: 120x120 mm
Total power requirement: 1.5 kW
Space requirement approx.: 1200 x x1000 x 1700 mm
Machine weight approx.: 1250 kg

Manufacturer's description;
The powerful drive provides the prerequisite for high cutting performance, long service life of the saw blades and perfectly clean cut surfaces. All gears are hardened and flank-ground.
Iiedpfxeq Ukvxs Ad Dji
The entire gearbox runs in an oil bath; all bearing points have roller bearings. Various speeds can be achieved by means of gear wheels, the cutting speeds of which are switched electrically by pole-changing motors.

The tried and tested saw blade guide in a strong pivot bearing is subject to practically no wear. It is rigid and allows work within the tightest tolerances.
The hydraulic feed of the saw blade is infinitely adjustable according to Skla.

The listing was translated automatically. Translation errors are possible.

Seller

Registered since: 2005

6 listings online

Call

Send inquiry

Telephone & Fax

+49 40 33... show

+49 40 75... show

Fax:

These listings may also fit your interest.

Listing

Ennepetal

7,685 km

Cold Circular Saw
KALTENBACHKKS 400 E

Call

Condition: used, Year of construction: 1988, saw blade diameter 0400 mm Iisdpfxjxu Nrij Ad Dsi cutting diameter 140 mm cutting length 140 mm mitre joint cuts -/+ degrees +/-45° cutting capacity - square 130 x 130 mm cutting speed 5 - 30 m/min type of control konvent. voltage 380 V connected load 6 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 1,5 x 1,5 x 1,5 m Machine has angle cutting arrangement +/- 45°, is semi automatic without material infeed.

See details

Listing

Langwedel

7,678 km

Cold saws
Berg und SchmidVKS 370 HA

Call

Condition: good (used), Year of construction: 2011, From a company liquidation: Berg und Schmid VKS 370 HA Year of manufacture 2011 Semi-automatic machine 4-meter roller conveyor left + right Left stop with digital length measuring system, adjustable via handwheel Cutting capacity with a 370mm saw blade: Round 120mm - Square 100mm - Rectangle 180x100mm at 90° at 60°: Round 110mm - Square 90mm - Rectangle 90x100mm Miter cuts left up to 60° - right up to 45° Saw blade mount 40mm Saw blade speed 15-70 rpm 380 volts Coolant pump Semi-automatic function: Iiedpfxewa Ecqo Ad Dji 1. Clamp the material 2. Saw starts 3. Lower at rapid traverse to the beginning of the material or cut immediately for serial cutting 4. Remove the saw blade 5. Raise the frame until just above the material 6. Open the clamping jaw

See details

Listing

Cold saws Kaltenbach KKS 400 H Generalüberholt

Böhmenkirch

8,002 km

Cold saws
KaltenbachKKS 400 H Generalüberholt

€7,499

ONO plus VAT

Call

Condition: refurbished (used), Year of construction: 1980, For sale: Kaltenbach cold circular saw – Various versions and models in stock. The machine has been extensively overhauled both technically and visually. Gearbox, of course, backlash-free! Type: KKS 400 H Saw blade diameter: 400 mm Motor power: 1.8/2.7 kW Cutting speed: 10/20, 13/26, 15/30 m/min Feed rate: 0 - 1,000 mm/min Rapid approach/return: 1,550 mm/min Maximum working range: 130 mm Square material working range: 120 mm Flat material working range: 305 x 20 mm Round material working range: 130 mm Minimum working range: 10 x 10 mm Miter range: 0° - 90° - 0° Ijdpfx Aexwnz Isd Djii Dimensions (LxWxH): 1,080 x 900 x 1,760 mm Weight: 850 kg Inspection/collection in 89558 Böhmenkirch. Shipping available on request. Forklift available for loading.

See details

Listing

Köln

7,690 km

Cold Circular Saw
KALTENBACHKKS 400 H

Call

Condition: used, Year of construction: 2001, saw blade diameter 400 mm miter . Kühlung weight of the machine ca. 1 t number 4 Stück +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Iisdslug Tuspfx Ad Dei Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

See details

Listing

Cold saws Kaltenbach Gehrungs-Kaltkreissäge

Karben

7,833 km

Cold saws
KaltenbachGehrungs-Kaltkreissäge

Call

Condition: good (used), MITRE COLD CIRCULAR SAW MACHINE Type: KKS 400 H Year of manufacture: 1982 Equipment: - Infeed roller conveyor 1000 mm, left - Outfeed roller conveyor with length stop, 2000 mm, right - Saw blade diameter: 370 mm - Hydraulic clamping cylinder with 8 mm stroke, handwheel for pre-setting Ijdpfx Adexnmn Us Dsii - Documentation Condition: good, workshop inspected

See details

Listing

Düsseldorf

7,660 km

Cold saws
KaltenbachKKS 400 E

€3,500

ONO plus VAT

Call

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: 1500 01025, saw blade diameter: 400 mm, total height: 1,700 mm, total width: 1,100 mm, overall weight: 700 kg, type of input current: three-phase, cutting diameter: 130 mm, space requirement height: 2,000 mm, space requirement length: 900 mm, space requirement width: 1,200 mm, length stop: 6,000 mm, Kaltenbach KKS400E cold circular saw, year of manufacture approx. 1980–1982, fully functional, can be inspected under power. Incl. outfeed roller conveyor with 6000 mm length measuring device. Cutting range at 90°: D130 or 120x120 mm, flat material 315x40 mm. Iisdowx Nn Ispfx Ad Doi

See details

Listing

Weiterstadt

7,845 km

Cold saws
KaltenbachKKS 400

Call

Listing

Cold Circular Sawing - Automatic KALTENBACH KKS 400 E

Velen

7,625 km

Cold Circular Sawing - Automatic
KALTENBACHKKS 400 E

Call

Listing

Trittau

7,709 km

Cold saws
KaltenbachKKS 400 E

Call

Condition: good (used), Year of construction: 1991, functionality: fully functional, Semi-automatic cold circular saw Make: Kaltenbach Model: KKS 400 E Year: 1991 Technical data: Manufacturer: Kaltenbach Model: KKS 400 E Year of manufacture: 1991 Saw blade diameter: 400 mm Gearbox with speeds: 14/28 m/min -Cutting range at 90° flat: 120×120 mm -Cutting range at 45° flat: 305×40 mm -Cutting range, round material: 130 mm -Cutting speed: 14/28 m/min Total power requirement: 3.5 kW Machine dimensions: L 1.0 x W 1.0 x H 1.90 m (plus roller conveyors) Weight: 1,250 kg + roller conveyors Equipment: - 3 m right-hand stop with roller conveyor - Left-hand roller conveyor, L = 1.5 m Iiodpow U Dbgjfx Ad Dei All information is provided without guarantee. A demonstration is possible at any time in our showroom.

See details

Listing

Cold saws Kaltenbach KKS 400 E - Generalüberholt

Böhmenkirch

8,002 km

Cold saws
KaltenbachKKS 400 E - Generalüberholt

€9,900

ONO plus VAT

Call

Condition: refurbished (used), Year of construction: 1991, For sale is a Kaltenbach cold circular saw. The machine has been completely disassembled and rebuilt. As part of the overhaul, the gearbox, motor, and hydraulics were reconditioned. The table has been planed and fitted with new bearings. Gearbox backlash-free! Type: KKS 400 E Year: 1991 Saw blade diameter: 400 mm Motor power: 1.8/2.7 kW Cutting speed: 10/20, 13/26, 15/30 m/min Feed rate: 0 – 1,000 mm/min Rapid advance/return: 1,550 mm/min Max. working area: 130 mm Working area for square material: 120 mm Working area for flat material: 305 x 20 mm Working area for round material: 130 mm Min. working area: 10 x 10 mm Mitre range: 0° – 90° – 0° Iedoxq S Ilspfx Ad Deii Dimensions LxWxH: 1,080 x 900 x 1,760 mm Weight: 900 kg Inspection / collection in 89558 Böhmenkirch Shipping available on request Forklift available for loading.

See details

Listing

Wiesbaden

7,810 km

Metal circular saw
KALTENBACHKKS 400

Call

Year of construction: 1980, condition: used, machine/vehicle number: 55155, disk of circular saw-Ø: 400 mm cutting area at 90° round: 130 mm cutting area at 90° square: 200 x 80 bzw. 315 x 40 mm cutting area in mitre at 45° square: flach/hochkant 180x70/100x60 mm Isdpfx Adjct Nc Io Deii cutting speed: 19/28 m/min engine: 380 V, 1,7/2,6 kW space needed: 1100 x 1050 x 1620 mm weight: 850 kg

See details

Listing

Automatic circular saw KALTENBACH KKS 400 NA 1200 CNC

Wiesbaden

7,810 km

Automatic circular saw
KALTENBACHKKS 400 NA 1200 CNC

Call

Year of construction: 1988, condition: used, machine/vehicle number: 109357, disk of circular saw-Ø: 400 mm cutting area at 90° round: 130 mm Isdpfx Aeb Sciaod Djii cutting area at 90° square: 240 x 85 mm cutting area in mitre at 45° square: profiles flat 180 x 70 mm cutting speeds: 10/20 m/min forward feed speeds: 0 - 1000 mm/min electrical connection: 400 V, 1,7/2,6 V space needed: 2750 x 1500 x 1900 mm weight: 1350 kg

See details

Cold sawsKALTENBACH KKS 400

Machine data

Price & Location

Details about the offer

Description

Seller

Send inquiry

Telephone & Fax

Cold saws
KALTENBACH KKS 400