Kröger MUK 303

Kröger MUK 303

Condition: used, Year of construction: 2024, 1 Hopper length approx. 7,000 mm instead of 5,200 mm, oil requirement 34.4 l (reinforced axles and springs recommended) 1 Sideboard extension (steel) 500 mm, foldable and removable all around, with viewing window at the front (not grain-tight) 1 Viewing window with protective grille in the front panel, dimensions approx. 355 mm wide and 625 mm high 1 Reinforced, adjustable in height, rubber-mounted drawbar, designed for 4t vertical load (required for 4t vertical load). Design as a central tube. 1 Double hydraulic support leg instead of mechanical support winch (for hopper length from 7,000 mm) 1 SCHARMÜLLER round shaft drawbar head, type K80, up to 4t vertical load 1 Axle spacing 1,800 mm for total weight 24t (in conjunction with reinforced axles and suspension) 1 Hydraulic suspension unit incl. BPW axles (max. 60 km/h), 2,150 mm track, second axle forced steering, axle load 11t (at 60 km/h), disc brake 410x180 mm, axle square 150 mm (only in conjunction with F 8011, brake cylinder located on top) 1 1st axle designed as a lift axle (only possible in conjunction with hydraulic suspension) 1 Electrically switched rear axle support for hydraulic suspension (increases stability) 1 Tires "new" 650/55R26.5 BKT FLOTATION RADIAL, profile FL 630, (65 km/h) 169D, (load capacity at 1.5 bar 10 km/h = 5,185 kg) Tedpfx Ais Afivmj Tod 1 Position and license plate lights in LED design 1 3-chamber rear lights, square, LED design 1 2 x LED reversing lights on the rear of the vehicle (3-pole socket 12 Volt required)

Condition: new, Year of construction: 2023, Tipping body height 1   approx. 2,200mm instead of 1,480mm (note overall vehicle height, delivery without tires, only in conjunction with hydraulic suspension) Tipping body length 1   Tipping body length approx. 7,500mm instead of 5,200mm, oil requirement 34.4l (only in conjunction with hydraulic suspension) Inspection window 1   Inspection window with protective grille in the front panel, dimensions approx. 355mm wide and 625mm high Upper side panel approx. 600mm, hydraulically 1   foldable on the right, to reduce the loading height (potatoes), operation via tractor hydraulics (double-acting control unit required) 1   Towing device at the rear Plastic mudguard, front axle 1   (required with warning sign package) Reinforced, height-adjustable, rubber-mounted drawbar 1   designed for 4t vertical load (mandatory for 4t vertical load), design as a central tube Double hydraulic support leg 1   double hydraulic support leg instead of mechanical support winch (for tipping body length from 7,000mm) SCHARMÜLLER round shaft drawbar 1   Type K80 up to 4t vertical load 1   Side marker lights (LED) Tsdpfx Ae Afh Tqsi Tjd 1   Position and license plate lights in LED Warning sign package for excessive width 1   (required from 2,750mm width, only in conjunction with F 1801) 1   3-chamber tail lights, square, LED version Quick lowering function 1   for tipping hydraulics via a 2-hose system (double-acting control unit required) Wheelbase > 1,800 mm for total weight 24t 1   (in conjunction with reinforced axles and suspension) Hydraulic suspension system incl. BPW axles 1   (max. 60km/h), 2,150mm track width, second axle forced steering, axle load 11t (at 60km/h), wheel brake 410x180mm, axle square 150mm, (only in conjunction with F 8011, brake cylinder mounted on top) 1st axle designed as a lift axle 1   (only possible in conjunction with hydraulic suspension) Electrically switched rear axle support 1   for hydraulic suspension (increases stability) Steering tie rod, forced steering 1   with additional telescopic automatic function, design as a curved steering tie rod with a mount for ball K50 on the left side Tires "new" 1   650/55R26.5 BKT FLOTATION RADIAL, tread FL 693, (70km/h) 169D, (load capacity at 1.5 bar, 10km/h = 5,185kg)

Condition: used, Year of construction: 2024, Standard equipment: K80 ball-type coupling with lower hitch Conical steel body with folded side walls Aluminum ladder at the front Base plate 4mm Side walls 3mm Hydraulic tailgate with rubber seal, safety lock, and driver indicator Grain slide in the center, including a detachable discharge chute Sturdy, foldable underrun protection Warning sign package at the front and rear Internal body dimensions approx. 6,500mm L x 2,260mm W x 1,730mm H Water capacity approx. 25.5 m³ Oil capacity approx. 34.4 l Additional equipment: Inspection window with protective grid in the front panel, approx. 355mm x 625mm Mountable warning triangles at the front and rear. Center triangle with a foldable support bar Walkway with fall protection bar on the front panel Green tarpaulin cover with aluminum roll-up bar Automatic trailer coupling at the rear, including light, air, and oil connections Reinforced, height-adjustable drawbar Todpfx Aio Ad Evao Tod Scharmüller K80 ball-type coupling up to 4 tons of vertical load Hydraulic support leg Position and license plate lights, LED 2x LED reversing lights (3-pole socket required) Wheelbase 1800mm for a total weight of 24t Reinforced axle unit with longitudinal link arms BPW axles 12t BPW trailing axle 40 km/h approval according to EU type approval