Kröger MUK 303

Kröger MUK 303

Condition: new, Year of construction: 2023, Tipping body height 1   approx. 2,200mm instead of 1,480mm (note overall vehicle height, delivery without tires, only in conjunction with hydraulic suspension) Tipping body length 1   Tipping body length approx. 7,500mm instead of 5,200mm, oil requirement 34.4l (only in conjunction with hydraulic suspension) Inspection window 1   Inspection window with protective grille in the front panel, dimensions approx. 355mm wide and 625mm high Upper side panel approx. 600mm, hydraulically 1   foldable on the right, to reduce the loading height (potatoes), operation via tractor hydraulics (double-acting control unit required) Bedpfxo Afh Tqo Ab Aolp 1   Towing device at the rear Plastic mudguard, front axle 1   (required with warning sign package) Reinforced, height-adjustable, rubber-mounted drawbar 1   designed for 4t vertical load (mandatory for 4t vertical load), design as a central tube Double hydraulic support leg 1   double hydraulic support leg instead of mechanical support winch (for tipping body length from 7,000mm) SCHARMÜLLER round shaft drawbar 1   Type K80 up to 4t vertical load 1   Side marker lights (LED) 1   Position and license plate lights in LED Warning sign package for excessive width 1   (required from 2,750mm width, only in conjunction with F 1801) 1   3-chamber tail lights, square, LED version Quick lowering function 1   for tipping hydraulics via a 2-hose system (double-acting control unit required) Wheelbase > 1,800 mm for total weight 24t 1   (in conjunction with reinforced axles and suspension) Hydraulic suspension system incl. BPW axles 1   (max. 60km/h), 2,150mm track width, second axle forced steering, axle load 11t (at 60km/h), wheel brake 410x180mm, axle square 150mm, (only in conjunction with F 8011, brake cylinder mounted on top) 1st axle designed as a lift axle 1   (only possible in conjunction with hydraulic suspension) Electrically switched rear axle support 1   for hydraulic suspension (increases stability) Steering tie rod, forced steering 1   with additional telescopic automatic function, design as a curved steering tie rod with a mount for ball K50 on the left side Tires "new" 1   650/55R26.5 BKT FLOTATION RADIAL, tread FL 693, (70km/h) 169D, (load capacity at 1.5 bar, 10km/h = 5,185kg)

Condition: used, Year of construction: 2022, We are selling our Kröger MUK 303 tipper trailer, manufactured in 2022. This Kröger trailer was used as a demonstration unit and is in like-new condition. Details of the equipment: - 24t permissible total weight (4 t support load) - Tipper body length approx. 8000 mm (oil capacity 34.4 l) Bsdpfs Aff S Rsx Ab Aslp - Two-sided tipping mechanism with continuous hinged side board, approx. 600 mm high, and rubber seal on the left side (platform height approx. +100 mm) - Side board extension (steel) 500 mm, foldable and removable all around, with a viewing window at the front (not grain-tight) - Plastic fenders for the front axle (required with warning sign package) - Reinforced, height-adjustable, rubber-mounted drawbar, designed for a 4 t support load (mandatory for a 4 t support load) up to 40 km/h (above 40 km/h, a maximum of 2 t support load is permitted), designed as a central tube, coupling height = approx. 600 mm - Hydraulic support leg instead of a mechanical support winch (double-acting hydraulic control unit required) - SCHARMÜLLER round shaft drawbar head, type K80, up to 4 t support load - Warning sign package for exceeding width (required from a width of 2750 mm, only in conjunction with F 1801) - Quick lowering for tipping hydraulics via a 2-hose system (operated via 2 control units from the tractor) - Axle distance > 1800 mm for a total weight of 24 t (in conjunction with adjustable axles and suspension) - Hydraulic suspension unit including BPW axles (max. 60 km/h), 2150 mm track width, second axle with trailing articulated joint, axle load 11 t (at 60 km/h), disc brake 410 x 180 mm, axle square 150 mm (no lift axle possible, only in conjunction with F 8011 brake cylinder mounted on top) - Electrically operated rear axle support for hydraulic suspension (increases stability when stationary) - New tires 650/55R26.5 BKT FLOTATION RADIAL, profile FL 693, (70 km/h) 169D, (load capacity at 1.5 bar, 10 km/h = 5185 kg) - Certificate for 40 km/h approval Inspection by appointment only! If you have any questions, please do not hesitate to contact me.

Condition: used, Year of construction: 2024, Standard equipment: K80 ball-type coupling with lower hitch Conical steel body with folded side walls Aluminum ladder at the front Base plate 4mm Side walls 3mm Hydraulic tailgate with rubber seal, safety lock, and driver indicator Grain slide in the center, including a detachable discharge chute Sturdy, foldable underrun protection Warning sign package at the front and rear Internal body dimensions approx. 6,500mm L x 2,260mm W x 1,730mm H Water capacity approx. 25.5 m³ Oil capacity approx. 34.4 l Additional equipment: Inspection window with protective grid in the front panel, approx. 355mm x 625mm Mountable warning triangles at the front and rear. Center triangle with a foldable support bar Blodo Ad Evaopfx Ab Ajp Walkway with fall protection bar on the front panel Green tarpaulin cover with aluminum roll-up bar Automatic trailer coupling at the rear, including light, air, and oil connections Reinforced, height-adjustable drawbar Scharmüller K80 ball-type coupling up to 4 tons of vertical load Hydraulic support leg Position and license plate lights, LED 2x LED reversing lights (3-pole socket required) Wheelbase 1800mm for a total weight of 24t Reinforced axle unit with longitudinal link arms BPW axles 12t BPW trailing axle 40 km/h approval according to EU type approval