Forging Hammer 5 ton

KRAMATORSK 17KP120

Condition: good (used), centerless grinding machine Lasdpjtrguvjfx Ammec

Condition: good (used), CHARACTERISTICS Plate diameter ⌀; 3200 mm Maximum turning/turning diameter ⌀; 3300 mm - With upright forward; 3300 mm - With upright set back; 5600 mm Min. turning/turning diameter ⌀ - With advanced upright; 800 mm - With upright set back; 3100 mm Lsdpfer I Aykox Ammoac Max turning height; 750 mm Control; FAGOR 8025 Spindle RPM (2 ranges); - 0,5 - 10 rpm - 10 - 40 rpm Motor Power; 80 hp Maximum table load; 30.000 kg

Condition: new, Delivery program Eifco hobbing machines Lasdpju Egdlefx Ammec

Condition: ready for operation (used), Year of construction: 1979, VTL BERTHIEZ (France) TM 500 SP Model: TM500 8P Year of Manufacture: 1979 Chuck diameter: 6300 mm Max. turning diameter: 15000 mm Max. workpiece height: 4000 mm Arm travel: 3600 mm Main motor power: 100 kW Laedpfjx Dbydsx Ammsc Max. workpiece weight: 80 tons Side tool post section: 360x360 mm Side tool post travel: 2500 mm Machine weight: approx. 230 tons Video available Milling and hobbing heads available

Condition: ready for operation (used), Year of construction: 1980, Gleason Hypoid cutter Sharpener 13A -1 pcs Milling diameter 89-500 mm Grinding wheel dimensions 305x19x102 mm Feed 0,05-0,18 mm Grinding wheel drive motor - 1800 rpm (60 Hz) - 1500 rpm (50 Hz) Floor space 1240x2310 mm Lsdpjr Elpvofx Ammsac Height 1422 mm Machine weight 4083 kg Gleason 19 revacicle cutter checking machine - 1 pcs

Condition: new, For sale, a pipe straightener from the German manufacturer SMS MEER, the machine is brand new, it was dismantled from a plant that collapsed during the delivery and assembly of the machine. The machine has two Siemens 200 kW drive motors each. Straightening rollers have a length of 460mm, diameter on the sides 400mm, diameter in the middle 300mm. Lsdpfom H Unhsx Ammjac The weight of the machine itself is 44 tons, the total weight is 55 tons. I can send a lot of photos before dismentling.

Condition: excellent (used), Year of construction: 1979, Rope Production line / Strand Rewinding line REDAELLI Line STABILISED CONCRETE PRE-STRESSING STRAND 3-wire and 7-wire strands which use with beams covering long spans, bridge elements, large pre-stressed elements, e.g. floor elements, piles, pre-tensioned and post-tensioned structures. - Year -1979/2005 - Pay of spool size - 800x900 mm - ⁠Range of strand production : - 3/8 - 1/4 - ⁠1/2 - 5/16 - ⁠6/10-7/16 - ⁠7/10-9/16 - Coil Weight - 4.000 kg - ⁠speed - 40-60 m/min. - ⁠High carbon steel wire - ⁠PC Stand size: - ⁠6.4,6.9,9.3,21.5 mm - ⁠Electrical supply - 400 kW Lsdpfjt Iq Hbsx Ammjac Line Consists : Wire Pay Of Wisting Unit Furnace Cooling System Traction Rollers Winding the Rope

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, overall weight: 120,000 kg, total height: 5,600 mm, pressing force: 1,250 t, air pressure: 6 bar, distance between side stands: 1,200 mm, distance between stands: 1,400 mm, stroke length: 500 mm, table length: 1,850 mm, table width: 1,600 mm, Straight-sided eccentric press ERFURT type PKZe 1250 Lasdeubyrxjpfx Ammsc Superb working condition, after full, professional overhaul. After - newer used. Specification: Capacity: 1250 ton force Slide stroke: 500 mm Slide adjustment: 215 mm Maximum shut height between bolster plate and slide (stroke down, adjustment up): 860 mm Bed area (width x depth): 1600x1850 Slide area (width x depth): 1300x1400 mm Opening in the bed (width x depth): 1100x1100 mm Main motor rating: 90 kW at 1478 RPM Ram adjusting motor rate: 7.5 kW at 1450 RPM Number of single strokes: 8 min-1 Cushion capacity: 200 ton force Cushion stroke: 200 mm Height above floor: 7900 mm Press weight: 130 000 kg.

Condition: good (used), Year of construction: 1979, Single column vertical turning lathe BERTHIEZ TM500 SP Manufacturer: Berthiez (France) Model: TM500 SP Year of manufacture: 1979 Main technical data: Table diameter: 6300 mm Maximum turning diameter: 15000 mm Laedjx A U Raspfx Ammjc Maximum usable height: 4000 mm Arm travel: 3600 mm Main motor power: 100KW Maximum allowable load on faceplate: 80 t Ram size: 360x360 mm Machine weight: approx. 230 tons The machine is capable of both turning and milling operations. Do not hesitate to contact us for any additional information.

Condition: good (used), Manufacturer: INNOCENTI Type: PM 325 FT Year of construction: 2012 Specifications: Metric Metric US Standard Table length Laodpfstwllfex Ammsc 4250 mm Table width 4250 mm Table load 130.000 V-axis feed 3000 mm B-axis rotation 360.000 ° High-speed rotation B-axis 0.16 - 34.5 Omw/min. Dimensions (estimate) length 8000 mm width 4250 mm height 2000 mm weight 62500 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.