Krampe SK460 soil dumper #697025

KRAMPE SK460 gronddumper #697025

Brand: Krampe
Type: SK 460

TECHNICAL SPECIFICATIONS
Permissible maximum weight: 16 t at 40 km/h
Payload in operation: approx. 14 t
Unladen weight: approx. 4.3 – 4.9 t
Ball hitch coupling 80 mm, permissible load on the drawbar coupling: 2 t (40 mm towing eye DIN 11 026)
Podpo Aguklsfx Ai Terc
Suspended drawbar: optional
Hitch height: 95+101+106 cm
Required drawbar force (min.): 55 kW (75 HP)
Required oil quantity/tipping angle: 20 l / 51°
Lifting cylinder, type: Telescopic ram
Lifting length: 2,305 mm / 4 stages
Lifting force with dry sand: approx. 12 t
Braking system: Air brake, dual line, ALB valve
Axle cross-section: 120 x 120 mm
Axle spacing: 1,360 mm
Chassis: Parabolic springs 20 t
Wheel brake: 410 x 120 mm
Track width: 1,950 mm
Body dimensions (internal): 4.65 x 2.30 m / 2.20 x 1.01 m
Transport volume (water level): 10.3 m³
Transport volume according to ISO7546: 13.0 m³
Transport volume with 60 cm extension: 16.4 m³
Transport volume with 80 cm extension: 18.5 m³
Transport volume with 80 cm extension + 20 cm extension: 20.5 m³
Bottom plate: 5 mm S355
Loading height above tires: from 2.35 m 560/60 R 22.5
Total height at tipping angle 55°: 5.53 m (Tipping angle 52°)
Total length: 6.58 m

Design

• Heavy-duty chassis made of 250×150 mm S355 profiles
• Conical body for easy unloading (10 cm slope)
• Detachable aluminum ladder
• Side walls made of a 4 mm S355 sheet
• Floor made of a single 4 mm HARDOX sheet
• Heavy-duty frame around the body made of 100×80 mm profiles
• Rubber blocks between the chassis and body
• Pivoting bearing with replaceable brass bush, mounted without play
• Preparation for body extension
• Oversized telescopic tipping cylinder
4 stages, 20 liters of oil required.
• Tipping cylinder positioned as far forward as possible,
2,305 mm stroke and a tipping angle of 51 degrees.
• Lifting capacity of cylinder: 12 tons
• All road lighting in LED
• Rear lighting unit made of special material,
which minimizes the risk of breakage.
• Body edge height: 60 cm
• Long and slender drawbar
• Swiveling tow eye 50 mm
• DIN plate on the drawbar for easy exchange of the drawbar coupling
• Vertical hydraulic support leg with a large stroke and a large footplate
• 6/2 valve for switching between rear tailgate/support leg operation
• Automatic load control valve
• 40 km/h approved
• Total permissible weight 16 tons at 40 km/h
• Width-adjustable mudguards
• Round plastic mudguards at the rear
• Axle spacing: 1,360 mm
• Dual-line pneumatic braking system
• Parabolic suspension with 20 tons payload, mounted
on the upper side of the continuous axles for high ground clearance
• BPW 10-hole axles 120 x 120 mm, 10 tons payload per axle
• Wheel brakes 410 x 120 mm
• Automatic slack adjuster on the brakes
• Hydraulic tailgate
• Painted in 2-component Krampe red paint
• Rims painted grey
• European homologation
• 4x tires 500/60R22.5 BKT FL630
• Aluminum ladder on the front wall
• Hose rack for storing hoses
• Hoses are positioned high on the tipper so that
they do not interfere with the pivot point of the drawbar coupling.

The listing was translated automatically. Translation errors are possible.