Injection molding machine
KraussMaffei KM 900 – 8100 GX

Name: KraussMaffei KM 900 – 8100 GX
Brand: KraussMaffei
Availability: InStock

Year of construction

2015

Condition

Used

Location

Wrocław

Injection molding machine KraussMaffei KM 900 – 8100 GX

Show map

Machine data

Machine type:: Injection molding machine

Manufacturer:: KraussMaffei

Model:: KM 900 – 8100 GX

Year of construction:: 2015

Condition:: excellent (used)

Price & Location

Location:: Kwiatkowskiego 5a, 52-407 Wrocław, Polska

Call

Details about the offer

Listing ID:: A195-49221

Update:: 11.07.2025

Description

Krauss Maffei KM 900 – 8100 GX Injection Moulding Machine
Year of manufacture: 2015

General description:
Hydro-mechanical, two-platen clamping system with 4 pressure pads on the fixed platen and 4 adjustment units on the moving platen.

The machine is equipped with a PV-type proportional valve injection unit adjustment system.

Control is handled by the modern MC6 control system, based on an industrial PC with real-time Ethernet technology.
The control panel features an integrated 19-inch touchscreen with a color display, LED backlighting, and visualization of all processes using ProcessDesigner.

Plasticising unit:
Complete unit for thermoplastics processing

Wear-protected (abrasion-resistant) version

Screw diameter: 105 mm

Check valve and open nozzle

Technical data:
Clamping unit:

Clamping force: 9,000 kN

Mould opening force (pressure pads): 630 kN

Platen size (W x H): 1,660 x 1,530 mm

Tie bar spacing: 1,180 x 1,000 mm

Max. mould opening stroke: 1,600 mm

Mould height (min – max): 500 – 1,100 mm

Maximum opening stroke: 2,100 mm

Ejector stroke: 300 mm

Ejector force (forward / return): 140 / 70 kN

Injection unit:

Screw diameter: 105 mm

L/D ratio: 23.0

Injection pressure: 1,778 bar

Injection volume: 4,546 cm³

Shot weight (PS): 3,228 g

Injection rate: 805 cm³/s

Screw speed (standard): 150 rpm

Nozzle contact force: 166 kN

Electrical and hydraulic equipment:

Pump motor rating: 120 kW
Rsdpfxjwyxbgj Afcop

Heater rating: 59 kW

Number of barrel heating zones: 7

Dry cycle time / stroke (Euromap 6): 3.3 s / 826 mm

Dry cycle time / stroke (KM standard): 2.9 s / 590 mm

Oil tank capacity: 1,450 l

Dimensions and weight:

Net weight (with control cabinet): 40 t

Machine dimensions (L x W x H): 10.72 x 3.03 x 2.51 m

The listing was translated automatically. Translation errors are possible.

Seller

Registered since: 2019

91 listings online

Call

Send inquiry

Telephone & Fax

+48 71 70... show

These listings may also fit your interest.

Listing

Injection molding machine KraussMaffei KM 420-2000 CX

Cantabria

7,429 km

Injection molding machine
KraussMaffeiKM 420-2000 CX

Call

Condition: like new (used), Year of construction: 2008, operating hours: 6,200 h, functionality: fully functional, clamping force: 4,200 kN, screw diameter: 75 mm, Krauss-Maffei KM 420-2000 CX Rodpfxewq D Efe Afcsp Krauss-Maffei injection molding machine, 420 tons of clamping force. Only 6,000 hours of automatic operation. Year of manufacture 2008. MC5 control. Screw diameter 75 mm. Extras: 8 hot runner zones. 2 cores on fixed platen, 2 cores on moving platen. 1 pneumatic valve on moving platen. The injection molding machine is delivered reconditioned by UK Transitus' expert technical team. We can offer commissioning at our clients' facilities, ensuring operation upon completion of the installation. Technical Details 75mm screw Injection pressure: 1635 bar Shot volume: 1237 cm3 Shot weight: 1126 g Maximum distance between plates: 1400 mm Minimum mold thickness: 380 mm Opening stroke: 1020 mm Distance between columns: 900 x 800 mm Plate dimensions: 1270 x 1230 mm 75mm screw Clamping force: 4200 kN Year of manufacture: 2008 Working hours: 6282

See details

Listing

Used injection moulding machine KraussMaffei KM 500 - 3500 C2

Eschweiler

7,651 km

Used injection moulding machine
KraussMaffeiKM 500 - 3500 C2

Call

Condition: ready for operation (used), Year of construction: 2006, operating hours: 77,000 h, functionality: fully functional, clamping force: 5,000 kN, screw diameter: 100 mm, Clamping force 5000 kN Mould opening force, max. 280 kN Travel force movable platen opening 137 kN Travel force movable platen closing 136 kN Size of mould platens (h x v) 1270 x 1200 mm Distance between tie bars (h x v) 900 x 800 mm Mould opening stroke 1170 mm Mould height min 480 mm Max. daylight 1650 mm Hydraulic ejector - stroke 250 mm Ejector force 95/48 kN Injection unit: Screw diameter 100 mm Ls/D ratio 18 Injection pressure 1411 bar Stroke volume 2411 ccm Shot weight (PS) 2194 gr. Injection rate 801 ccm/s Screw speed 189 1/min Plasticising rate max. 161 g/s Nozzle pressure 173 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 90 kW Installed heating capacity 44 kW Adjustable barrel heating zones 7 Oil Reservoir capacity 1075 ltr. Dimensions and weights: Dimensions of the machine ca. 7,50 x 2,50 x 2,50 m Total machine weight 27090 kg Max. mould weight 7900 kg Accessories: - Anti vibration pads - 2 x 8 fold water flow regulator Additional Options: Redpewgni Hofx Afcop - 2 x hydr. core pull on movable plate - 2 x hydr. core pull on fix plate - Robot interface according to Euromap 12 - 16 x hotrunner controller - 1 x air valve on movable plate

See details

Listing

Injection molding machine KraussMaffei KM 850-12000 MX

Wrocław

8,235 km

Injection molding machine
KraussMaffeiKM 850-12000 MX

Call

Condition: excellent (used), Year of construction: 2011, Krauss Maffei KM 850-12000 MX injection molding machine Year of production - 2011 LRX 500 robot Z axis 4000 mm X axis 1500 mm Y axis 1250/1250 mm Rsdpfxjwqdyio Afcjp Hydraulic-mechanical two-plate closing system with 4 pressure cushions and 4 locking units on the moving plate. PV - injection unit regulation. MC 5 control system with color monitor, integrated control panel and USB data carrier. Plasticizing system Complete plasticizing system for thermoplastics with screw diameter 135 mm, with check valve and open nozzle Nozzle radius 25 mm, nozzle opening 9 mm TECHNICAL DATA Closing unit - mold closing force: kN 8500 - mold opening force: kN 560 - dimensions of the mounting plate (h x v): mm 1600 x 1600 - clearance between columns (h x v): mm 1140 x 1140 - mold opening path: mm 1600 - mold height (min-max.): mm 500 - 1100 - opening width: mm 2100 - ejector stroke: mm 300 - ejector force: kN 200/ 100 Injection unit - screw diameter: mm 135 - pressure injection: bar 1389 - injection volume: cm3 8588 - injection weight for PS: g 6098 - injection efficiency: cm3/s 1414 Electro-hydraulic equipment - rated power of the pump motor: kW 132 - dry cycle time according to Euromap 6: 1/h 965 - oil tank capacity: l 2440 Weight and dimensions - net weight with control cabinet: t 49 - dimensions of the place for installation (length x width x height): m 11.72 x 2.92 x 2.71

See details

Listing

Injection moulding machine KraussMaffei KM 650 - 6100 CM

Eschweiler

7,651 km

Injection moulding machine
KraussMaffeiKM 650 - 6100 CM

Call

Condition: ready for operation (used), Year of construction: 2007, operating hours: 70,000 h, functionality: fully functional, clamping force: 6,500 kN, screw diameter: 95 mm, displacement volume: 3,367 cm³, Clamping force 6500 kN Mould opening force, max. 346 kN Travel force movable platen opening 169 kN Travel force movable platen closing 144 kN Size of mould platens (h x v) 1520 x 1470 mm Distance between tie bars (h x v) 1000 x 930 mm Mould opening stroke 1150 mm Mould height min 600 mm Max. daylight 1750 mm Hydraulic ejector - stroke 250 mm Ejector force 95 kN Injection unit: Screw diameter 96 mm Ls/D ratio 23 Injection pressure 1795 bar Stroke volume 3367 ccm Shot weight (PS) 3064 gr. Injection rate 690 ccm/s Screw speed 153 1/min Plasticising rate max. 104 g/s Nozzle pressure 166 kN Rjdpfjx Hzzcsx Afcep Electric and Hydraulic Equipment: Nominal capacity of pump motor 90 kW Installed heating capacity 50 kW Adjustable barrel heating zones 7 Dimensions and weights: Dimensions of the machine ca. 9,83 x 2,90 x 2,80 m Total machine weight 43170 kg Accessories: - Anti vibration pads - Krauss Maffei Robot LR300 X: 1200 mm, servo Y: 1000/1000 mm, servo Z: 3500 mm, servo C: 0 - 90° - Conveyor - saftey guard Additional options: - 1 x air valve - 6 x pneumatic sequentional valves - 12 hotrunner controller - 2 x hydr. core pulls on movable plate - 2 x hydr. core pulls on fix plate

See details

Listing

Injection molding machine KraussMaffei KM 800-5000 MC

Wrocław

8,235 km

Injection molding machine
KraussMaffeiKM 800-5000 MC

Call

Condition: excellent (used), Year of construction: 2001, Injection moulding machine: Krauss Maffei KM 800-5000 MC Year of manufacture: 2001 Operating hours: 70,000 h Configuration: Machine with robot, safety cage and conveyor belt Availability: Two identical machines available Clamping unit: Clamping force: 8,000 kN Maximum mould opening force: 356 kN Moving platen opening force: 98 kN Moving platen closing force: 92 kN Mould platen dimensions (H x W): 1,610 mm x 1,530 mm Distance between tie bars (H x W): 1,120 mm x 1,000 mm Mould opening stroke: 1,400 mm Rjdpfx Afjxqh I Iocsp Minimum mould height: 600 mm Maximum mould opening: 2,000 mm Hydraulic ejector stroke: 250 mm Injection unit: Screw diameter: 90 mm L/D ratio: 23 Injection pressure: 1,742 bar Injection volume: 2,863 cm³ Shot weight (PS): 2,605 g Dimensions and weight: Machine dimensions (LxWxH): 10.5 x 2.86 x 2.89 m Weight: 43 tonnes

See details

Listing

Injection molding machine KraussMaffei KM 800-4300 MX

Schwäbisch Gmünd

7,985 km

Injection molding machine
KraussMaffeiKM 800-4300 MX

Call

Listing

Injection molding machine KraussMaffei 850T-3000

Tigery

7,552 km

Injection molding machine
KraussMaffei850T-3000

Call

Condition: excellent (used), Year of construction: 2011, operating hours: 38,000 h, clamping force: 850 kN, screw diameter: 80 mm, clearance between the columns: 1,140 mm, mold height (min.): 500 mm, pressure: 2,400 bar, power: 6.6 kW (8.97 HP), Year: 2011 Control type: MC5 Operating hours: 38,000 h Storage location: MECA PLASTIC Availability: IMMEDIATE Clamping force: 850 T Rsdowvp E Ijpfx Afcsp Opening stroke: 1600 mm Distance between tie bars: 1140 mm x 1140 mm Platen dimensions: 1600 mm x 1600 mm Min./max. mould height: 500/1100 mm Max. distance between platens: 2700 mm Screw diameter: 80 mm Screw length: 20D Capacity (cm³): 1810 Pressure (bars): 2328 Motor power: 90 kW Heating power: 36 kW Closing unit weight: 32 t Injection weight: 10 t Machine length: 2.30 m Machine width: 2.92 m Machine height: 2.51 m Cores: 6 HYDRAULIC CORES Robot interface: YES Bimetallic: YES Others: 12 sequential controls 1 robot KM LRX350

See details

Listing

Krauss Maffei 500-2700 C1 (2005) KraussMaffei 500-2700 C1

Trenčianske Stankovce

8,453 km

Krauss Maffei 500-2700 C1 (2005)
KraussMaffei500-2700 C1

Call

Condition: good (used), Year of construction: 2005, Krauss Maffei 500-2700 C1 (2005) MC4 controll Clamping force: 500 t Screw diameter: 80 mm Type: Horizontal Drive: Hydraulic Clamping unit: Clamping force: 500 t Opening stroke: 1260 mm Rjdpfx Aex H Au Rsfcsp Tie bar spacing (H×V): 900×800 mm Platen size (H×V): 1270×1200 mm Injection unit: Screw Ø: 80 mm Max. inj. press.: 1829 bar Inj. vol.: 1433 cm³ Shot weight (PS): 1304 g Electrical equipment: Voltage: 400 V / 50 Hz Sepro Linear robot available Accumulator English, French, Czech language available. Hours: 61000

See details

Listing

Injection Molding Machine KraussMaffei KM500-4300CX

Germany

7,870 km

Injection Molding Machine
KraussMaffeiKM500-4300CX

Call

Condition: excellent (used), Year of construction: 2010, 1,0 St. gebr. Spritzgießmaschine Hersteller: KRAUSS MAFFEI Typ: KM300-1900CX Baujahr: 2011 Schließkraft: 300 Tonnen Holmabstand 630 x 630 mm Schnecken DN: 60 mm Max. Hubvolumen: 769 cm³ Spritzteilgewicht: 692 g/PS Steuerung: MC5 Ausstattung: 3 St. Kernzug Djbr Rvoxyrc Isf Nysul Schnittstelle Roboter Rjdpfx Aox Tbfusfcjp 45- Fach Heisszonenkanalregelung Schnittstelle Temperiergerät Ca. 51.000 Betriebsstunden

See details

Listing

Injection Molding Machine KraussMaffei KM300-1900C2

Germany

7,870 km

Injection Molding Machine
KraussMaffeiKM300-1900C2

Call

Condition: excellent (used), Year of construction: 2005, operating hours: 76,000 h, 1,0 St. gebr. Spritzgießmaschine Hersteller: KRAUSS MAFFEI Typ: KM300-1900C2 Baujahr: 2005 Schließkraft: 300 Tonnen Holmabstand 630 x 630 mm Schnecken DN: 60 mm Rsdpsxyq S Ujfx Afcep Max. Hubvolumen: 754 cm³ Spritzteilgewicht: 679 g/PS Steuerung: MC5 Ausstattung: 2 St. Kernzug Schnittstelle Roboter Werkzeuginnendruckmessung 24- Fach Heisszonenkanalregelung Schnittstelle Temperiergerät Ca. 76.000 Betriebsstunden

See details