Mobile Juicingplant

Kreuzmayr Maschinenbau

Year of construction: 2025, Condition: new, Capacity up to 2000 kg/h Mill motor 3,0kW Elevator motor 0,37 kW Ncelj Hmtdohccqrer Stepless speed regulation with frequency inverter Automatic start-stop-function for the elevator controled by 3 member sensor in the hopper from the following machine (press, mashpump,..) Stainless-steel construction on 4 wheels (2 tractable, 2 fixed roller) Dimensions: (lxwxh) 3100x675x2200mm weight: 230kg Fold-away sorting table integrated Central wastewaterdrain on the bottom (ø75mm)

Year of construction: 2025, Condition: new, 18 kW e-heater for 1000 pices 1 liter bottles used for pasteurization of cold filled bottles, jars,... automatic temperature control Nelhcj Hmwkocqrjcr 400V 50Hz 32A 18kW mounted on moveable frame

Year of construction: 2022, operating hours: 150 h, Condition: new, capacity up to 8000kg/std with grinder 5,5kW with shredder belt (plastic chain) speed steplessly adjustable Nolhce Hnafecqrocr Powerful blower Cleaning water circulation pump

Year of construction: 2022, Condition: new, Stainless steel execution Motor power 1 .1kw left - right rotation Stirring wave length 1000 mm Nslhccqe Hnmverocr Mixing blade diameter 150 mm

Condition: new, Year of construction: 2025, in line bottle filler for 2 bottles from 0.2 to 2 liter Ncslhccqe Hmu Norsr on fixed chassis with storage tank

Year of construction: 2012, Condition: used, pasteurizer with pipe heat exchanger 600 l/h (up to 80°C) with automatic control storage tank for BiB with level control BaginBox filler with flow meter oil boiler 50kW mounted on braked trailer with tarpaulin Ncslhe Hnnheccqror max. weight: 1350 kg

Condition: new, Year of construction: 2025, in line bottle filler for 4 bottles from 0.2 to 2 liter on fixed chassis with storage tank Nolhcce Hmvhoqrocr

Year of construction: 2014, Condition: new, for 3/5/10 liter BaginBox packaging material: plastic Nelhccs Hncijqrocr

Condition: excellent (used), Year of construction: 2011, Stock Laminating "AHPL - On the Fly" Type: AHPL7 - On the Fly Year: 2011 Max. Size: 1620x1620 mm Min. Size: 500x500 mm Ncoljwdrdvjhccqrsr Max. Speed: 10,000 sh/h with HP mode Carrier Sheets: N-F-E-B-C-EE-BB-EB-BC - Flute up to 7.0 mm Cardboard: from 0.5 mm Printing Sheets: Paper and Cardboard 120-800 g/m² Tolerance: A-Mode Accuracy Mode: +/- 0.5 mm HP Mode Continuous Mode - High Performance +/- 1-1.5 mm On the Fly Sheet Alignment Stacker: Stack Height 1800 mm - NON-STOP Stack Weight 2000 kg Sheet Feeder: NON-STOP - Imitation Sheet feeder Sheet exit height approx. 2750 mm Stack height 1500 mm Stack weight 2000 kg Pull lays left and right Side lay left on the B-side (HP mode) Pack turner: Pack height 80-120 mm in non-stop design

Condition: good (used), Functionality: fully functional, Hydraulische Pressen und Maschinenbau GmbH Hydraulic press, 70 9251 3, HES 16MP Nelsumk Naohccqrjcr Model: 7092513 Type: HES16MP General: Display: 0-400kp/cm2 / 0-25Mp

Condition: new, Year of construction: 2022, New machine Year of construction: 2022 Single-sided automatic edge banding machine with jointing unit, hot-melt adhesive application to straight workpieces (EVA-PUR glue tray with discharge function optional), HF cross-cut saw station, HF trimming unit, corner copying unit, chain feed, double roller top pressure, pull-out workpiece support rail, signal lamp for workpiece sequence and integrated line control for contactless control of processing functions. For ABS, PVC, melamine and thick wood veneer roll material, as well as fixed lengths of 0.4 3.0 / 6.0 mm and workpiece heights of 8 60 mm. Feed speed: 10.0 m / min.; 8.0 m / min. with corner copying 3 free spaces for finishing units 10 color touch screens Machine length 4030 mm Workpiece thickness 8 - 60 mm Workpiece width min. approx. 75 mm Workpiece length min. approx. 120 mm (min. approx. 200 mm with corner copying) Edge thickness 0.4-3.0 mm Chip removal joining unit 0 -2.0 mm stepless Total connection 7.5 kW - 400 V Feed speed 10 m/min; 8 m/min. Pneumatic connection 6 bar Net weight 1050 kg Options: Surcharge for radius scraper unit with blow-off device + suction unit Surcharge for flat scraper unit + suction unit Surcharge for buffing unit EVA/PUR glue pot with discharge function Surcharge for diamond tools Height=65mm for joining unit Riepe spraying device (anti-stick) on the joining unit Riepe spraying device (cleaning spray in front of buffing unit) Pipe system with 90° bend + manual slide mounted on machine with D=200mm Availability: short term Ncolsqfad Aehccqrjr Storage location: Hochheim

Condition: reconditioned (used), Year of construction: 2006, Functionality: fully functional, Krüsimatic G2 Joinery Center – Used, Completely Overhauled Nolhccqjwb Ev Horjcr Condition & Overhaul The machine has been completely overhauled by Krüsi Maschinenbau AG. It will receive a new control system, regulators, servo motors, and cabling – with a 12-month warranty on the mechanics and new components. Technical Specifications • Wood clearance: max. 200 x 320 mm • Feed-in length: 10,000 mm • Feed-out length: 10,000 mm • Supply voltage: 3 x 400 V / 50 Hz • Fuse protection: 3 x 63 A (provided by customer) • Pneumatic pressure: ≥ 8 bar • Air consumption: 10 – 15 m³/h • Machine control: IST software / Abb3d • Interface: BTL-compatible Processing units Gate 1: • 5-axis sawing unit (angle-limited) • 4-axis milling unit with 5-axis spindle head (horizontal) + marker • 4-axis notching unit with 2-axis spindle head (vertical) • Drilling unit with two horizontal tool holders • Chain slotting unit Gate 2: • Two Chalet milling motors (vertical) • Two Chalet milling motors (horizontal) • Two drilling units (horizontal) • Grooving unit (horizontal & vertical) Accessories • Extensive tooling included • Two compressed air tanks to reduce the weight of the gangs The perfect opportunity for carpentry shops, timber construction companies, and joinery centers that value reliability and precision – with a factory warranty

Condition: good (used), Year of construction: 1994, bending angle: 190 °, bending radius: 700 mm, overall weight: 3,300 kg, wall thickness: 11 mm, - PLC: Siemens Simatic S7 - NCU control system: Siemens 840D - CNC control: MMI Multicontrol 2000 - Dimensions and weight: Nslhccqewc Rt Tjrecr Length: 11.9m, width: 5.0m Height: 2.3m (according to manufacturer's data sheet)  3.5m currently measured at the highest point of the machine (see sketch below) o Empty weight: 33t o max. pipe Ø: 168.3mm o max. bending radius Rm: 700mm o min. Bending radius Ri: 80mm o Pipe extension length: 6000mm o max. bending angle: 190° o max. moment of resistance with St35W: 201cm3 - Electr. connected load: o 400V/50Hz o Full load current: 85A

Condition: good (used), Year of construction: 1998, Manufacturer: REIS Type: TUS 130 - 200 Control system: Siemens SIMATIC OP7 Year of construction: 1998 Specifications: Metric Metric US Standard Distance between the uprights 1360 mm Installation height 1700 mm Table length 1600 mm ram stroke 1800 mm Starting speed 200 mm/min. Working speed Nslju U Nb Ajhccqrecr 50 mm/min. Return speed 180 mm/min. Table travel 1700 mm Dimensions (estimate) length 4900 mm width 2800 mm height 5600 mm weight 18800 kg Please note: The information on this page is given in good faith and to the best of our knowledge and belief, and where possible obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: like new (used), Year of construction: 2018, operating hours: 1,139 h, Functionality: fully functional, total length: 4,077 mm, overall weight: 1,000 kg, Edge banding machine Lange B 90 KFE Ncolhcou D Htqecqrjr - Single-sided automatic edge banding machine with - 7" color touch screen - Roller table 800 mm - Joining unit, 2 motors equipped with DIA cutter - Hot melt adhesive application to straight workpieces EVA-PUR glue pot Coated with discharge function at the bottom - Quick-change basin - 2 x release agent spraying Ripa - HF cross-cut saw station, - HF trimming unit, - corner copying unit, - chain feed, double roller top pressure, - extendable workpiece support rail, - Signal lamp for workpiece sequence - For ABS, PVC, melamine and thick wood veneer roll material, as well as fixed lengths of 0.4 - 3.0 and 5.0 mm - Workpiece height 8 - 60 mm - Workpiece width min: 75 mm - Feed speed: 8 -10.0 m/min; - Radius scraper - Surface scraper - Finishing unit - buffing - 2 x cleaning agent spraying Ripa - LED lighting inside - Extendable roller support - Total length 4077 mm - Weight approx. 1000 kg

Condition: good (used), Year of construction: 1999, Used 6 meter guillotine shears from BBM Type: TS H 60 6 capacity: 6100 x 6 mm Year of construction: 1999 NC controlled Ncjlhcjwaz Dwscqrsr Pneumatic high holding table

Condition: used, Year of construction: 2015, Used machine Year of construction: 2015 Condition: Factory overhauled technical data: Workpiece thickness 8 - 50 mm Workpiece width min. approx. 75 mm Edge thickness 0.4 - 3.0 mm Single feed solid edge up to 5 mm Chip removal Joining unit 0 - 2 mm stepless Electrical connection 400 V, 50 Hz Total connection 7.5 kW Feed speed 5.5 - 8 m/min. Pneumatic connection 6 bar Net weight 850 kg Equipment: Joint milling unit with 2 motors and 45 mm high milling heads instead of 30 mm PUR/EVA outlet basin printing unit cross-cut saw Combination trimming unit Corner copying unit Ncelekwhbbehccqrsr Radius scraper Surface scraper Location: Hochheim Availability: Short term

Condition: new, Functionality: fully functional, sheet thickness steel (max.): 3 mm, working width: 3,200 mm, FLEXIbend RAS 73.30 - Available immediately. Do you want precision? Do you want power? Do you want productivity that catapults you forward? Then you should secure this offer! The machine is designed for people like you: entrepreneurs, decision-makers, producers. No compromises - only results. Technical power Working width: 3200 mm Max. sheet thickness: 3 mm (400 N/mm²) Speed Optimizer: Up to 15% faster. Because time is money. Five highly dynamic and ramp-controlled CNC axis movements for: • Bending beam 0-180 degrees • Upper beam 0-300 mm • Backgauge 10-1550 mm • Bending beam adjustment up to 80 mm • Lower beam adjustment up to 80 mm Features: Automatic tool clamping on the upper, lower, and bending beams Intelligent crowning system for 100% straight bends Touch&More control: Draw the part directly on the screen High-tech backgauge: 10-1550 mm – precise, fast, and safe Top ergonomics: Front or rear operation, 1- or 2-person operation – you decide Footswitches at the front, rear, or mobile – full control J-gauge up to 3050 mm International training & support – at your location or ours What are you waiting for? Secure your offer now. Ncjlhccswcatpjqrjr

Condition: excellent (used), Functionality: fully functional, conveyor belt length: 3,100 mm, conveyor belt width: 200 mm, Total length 310 cm Horizontal 130 cm Vertical 140 cm Horizontal top 40 cm Ncslheu Hlu Ssccqrsr Width 20 cm

Condition: new, Year of construction: 2025, - Dimensions 600 x 3,000 mm - M 56 conveyor chain with protective rollers and MS flights - 2.2 KW SEW gear motor for the feed chain drive - Automatic centering of the logs to the center of the rotor - Dimensions 1,500 x 4,500 mm - Machine for 6 - 35 cm logs - 18.5 KW drive motor for the rotor Nslhou Rpibsccqrjcr - 4 pre-cutters - 4 main cutters - each with hydraulic pressure system - 1 pair of centering rollers in front of the rotor - 1 centered pair of rollers after the rotor - 4 KW SEW geared motor for driving the rollers - 30 m/min feed speed - 1 pair of non-driven rollers in the pull-out

Condition: used, Year of construction: 2017, Used machine Year of manufacture: 2017 Condition: Factory overhauled by Lange Maschinenbau Minimum workpiece width approx. 75 mm Minimum workpiece thickness 8 - 50 mm Minimum workpiece length approx. 120 mm/180 mm for corner rounding Edge thickness 0.4 - 2 mm Stepless chip removal of the joining unit 0 - 2.0 mm Joining unit with two counter-rotating, insert-controlled joining units Diamond tool height = 55 mm Direct glue application to the workpiece, glue pot with 1.5 kg capacity EVA/PUR glue pot with discharge function Pressure unit Cross-cutting unit with HF motor, 2 saw blades, and high-precision linear guides Combination milling station for radius and chamfer milling Corner rounding unit Surface scraper unit Ncjlhccqjlfikiorjr Suction pipe system with 90° bend and manual slide valve mounted on the machine Machine length: 3273 mm Availability: Short term Location: Hochheim

Condition: new, Year of construction: 2024, max. cutting height 160 mm max. cutting width 600 mm min./max. trimming width 25-300 mm Adjustment times of the widths 0.2-1.0 sec. Ncolevdcc Rohccqrjr Feed rate 5-30 (70) m/min. Saw motor 37 KW Feed motor 2.2 kW Electric height adjustment of the top rollers 2 lasers Splitting wedges in the machine Fixed bush Adjusting bush Cutting width display Automatic width adjustment Saw shaft diameter 70 mm Weight 3.500 kg Available at short notice

Condition: new, Year of construction: 2023, New machine Year of construction: 2023 Single-sided automatic edge banding machine with jointing unit, hot-melt adhesive application to straight workpieces (EVA-PUR glue tray with discharge function optional), HF cross-cut saw station, HF trimming unit, corner copying unit, chain feed, double roller top pressure, pull-out workpiece support rail, signal lamp for workpiece sequence and integrated line control for contactless control of processing functions. For ABS, PVC, melamine and thick wood veneer roll material, as well as fixed lengths of 0.4 3.0 / 6.0 mm and workpiece heights of 8 60 mm. Feed speed: 10.0 m / min.; 8.0 m / min. with corner copying 3 free spaces for finishing units 10 color touch screens Machine length 4030 mm Workpiece thickness 8 - 60 mm Workpiece width min. approx. 75 mm Workpiece length min. approx. 120 mm (min. approx. 200 mm with corner copying) Edge thickness 0.4-3.0 mm Chip removal joining unit 0 -2.0 mm stepless Total connection 7.5 kW - 400 V Feed speed 10 m/min; 8 m/min. Pneumatic connection 6 bar Net weight 1050 kg Options: Surcharge for radius scraper unit with blow-off device + suction unit Surcharge for flat scraper unit + suction unit Surcharge for buffing unit EVA/PUR glue pot with discharge function Surcharge for diamond tools Height=65mm for joining unit Riepe spraying device (anti-stick) on the joining unit Riepe spraying device (cleaning spray in front of buffing unit) Pipe system with 90° bend + manual slide mounted on machine with D=200mm Ncjlhoqfad Hoccqror Availability: short term Storage location: Hochheim

Year of construction: 2024, Condition: new, - 260 mm cutting height - 750 mm cutting width - 5-30 m/min stepless feed - 2x75 sawing motors - 3 KW feed gearbox - 70 mm soindle diameter - 400 mm sawblade diameter - 5000 Kg weight Nslhovdahwjccqrscr

Condition: new, Year of construction: 2024, New machine Year of construction 2024 Compact and flexible in the smallest of spaces. Workpieces get their finish on a length of only 2.13 m. Equipped with a 1.1 KW high-frequency motor joining unit and diamond-tipped spiral jointing cutter, Teflon-coated gluing unit, pre-capping unit and HF multifunctional trimming unit 2 free spaces for finishing units, such as a surface scraper and polishing unit. Simple operation via 3.5 color touch screen. Technical data Machine length 2122 mm Ncjlhccqsu Swadersr Workpiece thickness 10- 45 mm Workpiece width min approx. 120 mm Edge thickness 0.4 - 2.0 mm Max. edge height = workpiece height + 4 mm (2+2) Electrical connection 230 V Total connection 3.6 kW Feed speed 6.5 m/min. Pneumatic connection 6 bar Net weight approx. 490 kg Options: Surface scraper unit Diamanmat tools height = 45 mm Availability: short term Storage location: Hochheim