Hay technology

Krone Swadro TS 620 Twin

- Two-rotor side rake with single and double windrow discharge
- Working width
a) Single windrow discharge: 6,200 mm
b) Double windrow discharge: 2 x 3,460 (6,920) mm
Ndjdpez Na Rpofx Akajc
- Windrow width approx. 1,100 - 1,600 mm*
- Transport height: 3,900 mm (without folding tine arms)
- Weight approx. 2,150 kg (base machine)
- Rotor diameter: 2,960 mm
- Ten tine arms at the front, 13 at the rear
- Max. PTO speed 540 rpm
- Power requirement approx. 37 kW (50 hp)
- Required hydraulic connections: 1 x single-acting, 1 x double-acting

Mounting
- Two-point mounting bracket (Cat I/II) incl. pivoting suspension via ball eye and roller
- Two-legged support leg
- Drive train
- Rotor gearbox with maintenance-free grease filling, completely hardened KRONE Dura-Max cam track
- KRONE Easy-Line drive concept (front rotor rotates faster than rear rotor)
- Rotors individually protected by overload clutch
- PTO shaft, wide-angle joint on one side, 1 3/8", Z=6 (1240)
- Drive train with freewheel

Rotors + Rotor chassis
- Cardan rotor suspension incl. KRONE Jet effect
- Bearing of the tine arms by means of maintenance-free deep groove ball bearings
- Four 10.5 mm trailing double tines per arm with large coil diameter and "lift effect"
- Tines mounted to prevent loss around the tine arm
- Rear windrow curtain with manual width adjustment (automatically pivoting under 4m; windrow discharge to the right in the direction of travel)
- Mechanical transport lock as well as hydraulic headland lift limitation
- Rotor height adjustment by hand crank incl. rotor height indicator
- Simple operation via hydraulic control unit, incl. sequential control of the rotors
- Hydraulic changeover from single to double windrow discharge
- Four-wheel rotor chassis incl. two pivoting wheels at the front
- Rotor tires: 4 x 16x6.50-8 each

Steering
- Direct control of the axle pivot steering via the mounting bracket

Additional equipment
- Warning signs and LED lighting
- Safety chain

The listing was translated automatically. Translation errors are possible.