Puller 12-2 clamping jaw, opening width 125 mm - 1 pc

KUKKO

Condition: used, Puller 20-3+ with tensioning screw, T-slot 200 mm, width 250 mm, 8.5 t, KUKKO · Two-arm design · With quick adjustment · Made of high-quality tool steel · With knurled handwheel for quick loosening and repositioning of the puller hooks without a wrench Iodpfx Ago Aamlnj Aotn · Optimal adjustment of the spindle to the shaft through a two-sided spindle tip (ball and point) Application: universally applicable, for removing ball bearings, bearings, gears, etc. · Can be used as an external and internal puller by reversing the puller hooks · Also suitable for removing asymmetrical workpieces · Other technical specifications: Weight: 7.05 kg · Material: High-quality tool steel

Condition: used, Puller with claw feet 14-2, clamping range 125mm, clamping width 10-140mm, 3.5 t, KUKKO Iodpj Aamarjfx Ag Aetn · Adjustable · With self-locking retaining pins for individual adjustment of the clamping range and clamping depth · Self-tightening · Easy to use. Application: for removing sprockets, bearings and similar parts in confined spaces. · Other technical features: weight: 1.06 kg

Condition: used, Separator set 15, nominal size 3, steel case, KUKKO · Complete set · Includes separator, puller, and extension Application: For removing ball bearings, roller bearings, inner rings, and other parts that fit flush. · Further technical specifications: Contents: 1 separator, size 3, 1 puller, size 3, 2 extensions, size 3 · Packaging: Steel case Iodpfx Ae Aalyqjg Ajtn

Condition: used, Nut splitter M18-M24, mechanical, quality 6, KUKKO · Mechanical Itjdpfx Ago Aak Nks Ajn · For loosening seized or overtightened nuts without damaging the threaded bolt. The dimensions given for the nuts refer to the wrench size! · Other technical specifications: Weight: 0.66 kg

Condition: used, Separation tool set 17, opening A, 25-155 mm, clamping range 400 mm, KUKKO · Complete with puller · Quick-acting clamping spindle · Special steel Itedpfx Ae Aaikysg Asn · User-friendly design, as the separating jaws are quickly and centrally clamped by a clamping spindle. Application: for removing ball bearings, roller bearings, inner rings and other flush-fitting parts, especially for automotive, agricultural and industrial mechanics. · Other technical features: Weight: 19 kg

Condition: used, Punch and die set 333, 115-piece, with type holder, 2.5mm, KUKKO · Interchangeable punches and dies (types) Iede Aah Epjpfx Ag Aotn · Standard font 0-9 and A-Z · With holder and precisely milled die recess. Several types can be placed side by side in the holder. · Other technical features: Contents: 115-piece set.

Condition: used, Internal puller set 25, 8-piece, 12-46mm, KUKKO Itsdpfxo Aahibe Ag Aon · Complete sets · Includes internal pullers and counter supports. Application: for removing tightly fitted ball bearings, ball bearing outer rings, and bushings. · Supplied in a sturdy "L-BOXX" · Other technical features: Weight: 6.50 kg · Packaging: L-Boxx

Condition: used, Puller 45-5, Spanning diameter 250 mm, Spanning width 300 mm, 9.5 t, KUKKO · Three-arm design · Equipped with gear-ratio-enhanced, self-centering puller hooks · Particularly suitable for removing tightly fitted gears, sprockets, ball bearings, pulleys, etc. Itods Aag D Dopfx Ag Aen Application: For removing particularly tightly fitted gears, sprockets, ball bearings, pulleys, etc. · Other technical specifications: Weight: 5.25 kg

Condition: used, Puller 110-20, Spanning distance 150 mm, Spanning width 200 mm, KUKKO · Two-arm design · Pulling hook is straight and consistently slender throughout Itsdpfxj Aagd Ro Ag Asn · Reversible hooks for both external and internal pulling operations · Hooks are secured with a pin to prevent them from falling out; the pin is released by pressing a button, allowing the hooks to be repositioned for internal or external pulling; by swapping the arms, the puller can also be used as an internal puller · Other technical features: Weight: 2.65 kg

Condition: used, Puller 20-2+ with tensioning screw, 150 mm tensioning distance, 160 mm tensioning width, 6 tons, KUKKO · Two-arm design · With quick adjustment · Made of high-quality tool steel Iodpfx Ae Aafzbsg Aotn · With knurled handwheel for quick loosening and repositioning of the puller hooks without a wrench · Optimal adaptation of the spindle to the shaft through a two-sided spindle tip (ball and point) Application: Universally applicable, for removing ball bearings, bearings, gears, etc. · Can be used as an external and internal puller by reversing the puller hooks · Also suitable for removing asymmetrical workpieces · Other technical features: Weight: 3.05 kg · Material: High-quality tool steel