Shaper cutter

LORENZ 3 - EW 30° - Zähne 16

Condition: used, Year of construction: 2007, x-travel 900 mm y-travel 300 mm z-travel 1000 mm control Siemens Sinumerik 840D max. workpiece diameter 1600 mm max. module 20 mm tip circle diameter 350 mm Milling arbour diameter 375 mm Total closing value 80 kVa weight of the machine ca. 33,5 t dimensions of the machine ca. 10,530 x 6,375 x 4,680 m Feed rate: - X-axis 1 to 3000 mm/min - Y-axis 1 to 3000 mm/min - Z-axis 1 to 4000 mm/min Spindle speeds in rpm: - Tool 26 to 265 - Workpiece table 0 to 8 Equipment/accessories: - M 2 motor milling head - Milling mandrels - Oil cooler Tsdpew Rrb Hofx Ahmec - Technical documentation

Condition: defective spare-parts repository (used), Table size: 1300 x 950 mm Tjdpfx Aheicnk Ejmec The device is not functional! Chassis for sale.

Condition: good (used), workpiece diameter between centers: 2,286 mm, The No. 61 Angular Hypoid Tester is designed to test large bevel and hypoid gears up to 90" diameter and with shaft angles from 0 - 135 degrees. Spur, helical and internal gears can also be accommodated. The drive or pinion spindle can be rotated in either direction at a recommended spindle speed of 600 RPM. It is mounted in a head which is vertically adjustable on a column, so that the spindle can be offset either above or below the center line of the gear spindle for testing hypoid gears. The pinion head column is adjustable angularly in a horizontal plane to permit testing of gears of any shaft angle from 0 - 135 degrees. Specifications: Centerline of Drive Spindle to Nose of Brake Spindle (90 degrees shaft angle and without face plate): 38-1/2" Max. / 7-5/8" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and without face plate): 60" Max. / 10" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and with 54" face plate): 60" Max. / 28" Min. Centerline of Brake Spindle to Centerline of Drive Spindle (For Spur Gears): 56" Max. / 6" Min. Distance Between Nose of Brake Spindle and Nose of Drive Spindle (for spur gears): 36-1/2" Max. / 0" Min. Offset of Drive Spindle Either Above or Below Centerline of Brake Spindle: 10" Range of Shaft Angles: 0 - 360 Degrees Tjdpfx Ahjrtrzdomoc Maximum Diameter of Gear: 90" Diameter of Face Plate: 54" Outboard Bearing: 3" Diameter Hole Spindles: RPM of Drive Spindle Pulley Set No. 1: 100 - 400 RPM of Drive Spindle Pulley Set No. 2: 250 - 600 Diameter of Taper Hole (large end): 6" Taper Per Foot: 3/4" Depth of Taper: 8" Hole Through Spindle: 5-1/2" Net Weight of Machine: 20,000# Net Weight of Machine W/Outboard Support and Bed Plate: 24,000#

Condition: used, Year of construction: 2013, Brand : GEMINIS Todpozn Axisfx Ahmjc Model : GT5 G2 1200x1000 Manufacture year : 2013 Cnc : SIEMENS 840D-SL Center height: 615 mm Swing over cross slide: 850 mm Swing over bed : 1200 mm Main spindle bore diameter: 104 mm Main spindle nose: DIN 55026-11 mm Spindle diameter on front bearing:150 mm Turning Speeds : 0-1400 rpm Spindle Ranges: 4 Headstock power: (S1/S6-60%) 30/37kw – (37/46kw Optional) Headstock torque: (S1/S6-60%) 4000/4850 Nm (4800/5950Nm) Guide width: 655 mm Height up to the plane guide: 800 mm

Condition: used, Year of construction: 1994, functionality: fully functional, - Year of manufacture: 1994 - 1st owner, from own use - Fully functional, powered, ready for demonstration - X-axis travel: 200 mm - Z-axis travel: 1320 mm - Turning diameter: 350 mm - Turning length: 1250 mm - Rapid traverse Z-axis: 15,000 mm/min - Spindle speeds: 25 – 2,500 rpm - Spindle bore: 105 mm - Spindle motor power: 22 kW - Control: Fanuc 0TF - Chip conveyor: Z-type Net price, unloaded ex-location Luckenwalde (Germany), without transport Tsdpfx Ajxg A S Hjhmec

Condition: used, Year of construction: 2001, overall weight: 10,000 kg, total length: 3,000 mm, total width: 2,300 mm, total height: 2,500 mm, REISHAUER RZ 362 A – CNC Gear Grinding Machine Year of Manufacture: 2001 Serial No.: 75523 Max. Workpiece Diameter: approx. 360 mm Max. Module: 7 Max. Gear Width: approx. 175 mm Todjzy Tkmjpfx Ahmjc Max. Workpiece Weight: depending on configuration, approx. 60 kg Grinding Worm Diameter: approx. 270–350 mm Helix Angle: up to approx. ±45° CNC Control: Reishauer Connected Load according to Nameplate: 26 kVA Dimensions (LxWxH) approx.: 3000 x 2300 x 2500 mm Weight approx.: 10,000 kg Year of construction: 2,001 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: Loaded on truck under power: No

Condition: repair required (used), Year of construction: 2010, functionality: limited functionality, workpiece weight (max.): 10,000 kg, grinding wheel diameter: 400 mm, table diameter: 800 mm, spindle speed (min.): 1,200 rpm, spindle speed (max.): 8,000 rpm, type of input current: three-phase, grinding spindle motor power: 24,000 W, overall weight: 25,000 kg, input frequency: 60 Hz, workpiece spindle speed (max.): 10 rpm, total height: 4,650 mm, total length: 7,100 mm, total width: 8,000 mm, Equipment: documentation/manual, Machine status: Tjdpfxsz Dfn As Ahmec 1. Based on the visual inspection, no obvious signs of cracking, deformation, or damage were found on the machine enclosure, working axes, hydraulic system, in-process measuring system, cooling system, filtration unit, or other visible components. 2. The machine can be powered on, and the power supply has been confirmed to be normal. However, the axis parameters and program data have been lost, so it is currently not possible to verify whether the individual axes and overall machine movements are functioning properly. 3. After power-up, the axis positions, coordinates, machining programs, and other related data displayed on the screen all appear as question marks (“?”). The NCU battery and UPS battery were replaced, but the condition remained unchanged. 4. After power-up, a large number of error messages appear on the diagnostic page, including A1-axis encoder errors, input voltage errors, control module errors, cross-error compensation errors, and other related alarms. 5. According to the customer, the handwheel is damaged and needs to be replaced with a new one. The laser printer may also be defective and requires further inspection and confirmation. 6. The hydraulic oil, cutting oil, coolant, lubricating oil, and other fluids have been stored or used for an extended period and should be replaced with new fluids. 7. The pneumatic system hoses/pipes should be inspected for aging, cracks, or damage. Replacement will be required if any deterioration or leakage is found.

Condition: used, Daewoo Puma 12S-3A CNC Turning Centre Year: 1996 Fanuc Series O-T CNC Control C-Axis Spindle Live Tooling 12 Station Servo Turret Tjdozrt Dwjpfx Ahmjc Hydraulic Chuck Swing Over Bed: 570 mm Maximum Turning Diameter: 430 mm Maximum Turning Length: 770 mm Serial Number 3P100044 90 mm Bar Capacity 91 mm Spindle Bore A2-8 Spindle Nose Spindle Speeds: 25–3,000 rpm 18.5/22 kW AC Spindle Motor X Axis Travel: 260 mm Z Axis Travel: 800 mm Rapid Traverse: X 20 m/min, Z 24 m/min Automatic Lubrication Coolant System Swarf Conveyor Fully Enclosed Splash Guarding

Condition: used, Technical details: capacity at 100% ED: 400 A Tjdpfx Ahou Nwc Homoc capacity: 60% ED = 500 A welding current: Gleichstrom V weight of the machine approx.: 230 kg capacity: 21 kVA Welding rectifier MIG / MAG Cooling type F Protection class IP 23 insulation class F incl. wire feed device, feed rate 0,5 - 20 m/min Ground cable/pliers Hose package 4 meters new *

Condition: excellent (used), Year of construction: 2010, Capacity Swing over bed 750mm / 29.5" Swing over carriage 480mm / 18.9" Max. Turning diameter 750mm / 29.5" Max. Turning length 3935mm / 155" Distance between centres 4000mm / 157.5" Max. load between centres 3000kg Max. load by chucking 750kg Spindle Spindle speeds 3-1000rpm spindle speed range manual 2 steps Spindle nose type A2-11 Spindle bore 6.9mm / 6.9" Spindle taper MT6 Carriage Max travel X axis 425mm / 16.7" Max travel Z axis 3935mm / 155" Rapid traverse X axis 3m/min / 120ipm Rapid traverse Z axis 6m/min / 236ipm Ball screw (diameter x pitch) X axis 32 x 5 mm Z axis 50 x 10mm Cross side width 260mm / 10.2" Turret tool post Curvic type H-4 (Manual) Number of tool positions 4 Tool site 32 x 32mm (1.25 x 1.25") Tailstock Taper in tailstock spindle MT6 Tailstock quill stroke 200mm / 7.9" Tailstock quill diameter 112mm / 4.4" Motor Main spindle motor AC18.5/15kw (25/20HP) X axis servo motor AC1.0 kW (1.3HP) Z axis servo motor AC2.9KW (3.8HP) Lubricant pump motor for headstock 0.2kW Tjdpfx Ahjzfac Tsmoc coolant pump motor 0.18kW Lubricant pump motor for apron 0.025kW