Briquetting Press / Briquette PressmĂĽtek Systemtechnik
MPP 110
Machine data
- Machine type:
- Briquetting Press / Briquette Press
- Manufacturer:
- mĂĽtek Systemtechnik
- Model:
- MPP 110
- Year of construction:
- 2026
- Condition:
- new
Price & Location
- Location:
- Grienweg 38, 72666 Neckartailfingen, Deutschland
Details about the offer
- Listing ID:
- A433-2239
- Update:
- 05.12.2025
Description
Very robust machine with high pressing force
- is also suitable for producing a saleable briquette quality *depending on the material. The large press cylinder and the 65 mm briquette make this possible.
Our best-selling briquetting press series
+ Tried and tested, simple technology, for extremely low susceptibility to faults
+ 25 years of experience, further development and know-how
+ Several thousand machines in use with satisfied customers
+ Good price-performance ratio
Options:
Surcharge for cooling unit + € 3,995 net, (can also be retrofitted later)
* cools the press tongs (important from 3.5 hours) and the hydraulic oil
* Cooling unit recommended for regular operation of more than 3.5 hours at a time.
Large pre-compressor chamber + € 1,975 net
recommended for light starting materials such as wood shavings
Product code: 84793010
Briquette diameter: 65 mm
Front bush: 65 mm
Briquette stroke max.: 50 mm
Briquette stroke opt.: 50 mm
Output (depending on material): up to 110 kg/h*
approx. 87 kg/h in the last test.
*depending on the bulk density
*based on a bulk weight of 200 kg per cubic meter
.
Motor power: 5.5 kW
400 Volt / 50 Hz / 3-phase
Length: 1925 mm
Width: 1100 mm
Height: 1500 mm
Weight: 800 kg
Oil volume: 110 liters
Silo diameter: 1000 mm
Silo capacity: approx. 0.7 qbm
Pump: 37 liters
Hydraulic pre-compressor
Cooling press tongs option: yes, with special accessory Coolable press tongs
Cooling of the pressing tongs via water tank (to be procured on site)
Hydraulic oil cooling option: yes
Fill level monitoring option: yes
Briquette option: yes (depending on material)
CE compliant
.
Requirements for the raw material:
- The moisture content (atro) must be between a minimum of 6 and a maximum of 18 %
- Chip length maximum 15 mm
- Installation temperature: tempered room at a minimum of +5°C
- The feed must be free of metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and / or increased wear may result
Hsdsffh Atspfx Ahuofb
The listing was translated automatically. Translation errors are possible.
Seller
Registered since: 2005
Send inquiry
Telephone & Fax
Netherlands BRT HARTNER GmbHHP5-3035
Vomp MaweraRZM 200 wenig Betriebsstunden
Nattheim Berkmann
Teisnach AL-KO
Bad Oeynhausen HEESEMANNEH52.13 Lw/Lk Bw
Czech Republic PRODECOE60 ECO
Krauchenwies Beck Maschinenbau GmbHTT3000
Germany HEESEMANNEH31.11 Lk Bw
Juszczyn BiesseLevia 110
Used-Machines Trust Seal
What is the trust seal?
Used-Machines certifies selected sellers with the Used-Machines trust seal. Before approval, a standardized and comprehensive check is carried out by experienced Used-Machines staff.
What do we verify?
Check of
trade licence or commercial register extract
Verification of the dealer's
postal address
Validation of the
banking details
Verification of
accessibility to
main phone number
Credit report
may not contain negative criteria
Buyer complaints
can lead to withdrawal of the sealWhat does this mean for you as buyer?
The Used-Machines trust seal enables you, as a buyer, to identify trustworthy sellers who are very likely to do honest and righteous business, without having to do your own investigation.
Disagreements may of course still arise during the purchasing process. Used-Machines is not liable for any legal violations by buyers or sellers active on Used-Machines.