Used Mütek Systemtechnik Mpp 110 for sale (5,526)

Condition: new, Year of construction: 2026, Machine manufacturing time: approx. 3.5 months Very robust machine with high pressing force - also suitable for producing marketable briquette quality, depending on the material. The large-sized pressing cylinder and the 65 mm briquette make this possible. Our best-selling briquetting press series + Proven, simple technology for extremely low susceptibility to errors + 25 years of experience, continuous development and know-how + Several thousand machines in operation with satisfied customers + Good price-performance ratio Options: Additional cost for cooling unit: €3,995 net (can also be retrofitted later) * cools the pressing jaws (important for operation of 3.5 hours or more) and the hydraulic oil * Cooling unit recommended for regular operation of more than 3.5 hours at a time. Large pre-compression chamber: €1,975 net Recommended for lightweight raw materials such as wood shavings Commodity code: 84793010 Briquette diameter: 65 mm Front bushing: 65 mm Briquette stroke max.: 50 mm Briquette stroke opt.: 50 mm Performance (material-dependent): up to 110 kg/h* approx. 87 kg/h in the last test. *depending on the bulk density *based on a bulk density of 200 kg per cubic meter. Motor power: 5.5 kW 400 volts / 50 Hz / 3-phase Length: 1925 mm Width: 1100 mm Height: 1500 mm Weight: 800 kg Oil volume: 110 liters Silo diameter: 1000 mm Silo volume: approx. 0.7 cubic meters Pump: 37 liters Hydraulic pre-compressor Option: Cooling of pressing jaws: yes, with special accessories for coolable pressing jaws Cooling of the pressing jaws via water tank (to be provided on site) Option: Cooling of hydraulic oil: yes Option: Level monitoring: yes Dcodoffh Atepfx Adren Option: Log briquettes: yes (material-dependent) CE compliant Requirements for the raw material: - The moisture content (oven-dry) must be between a minimum of 6% and a maximum of 18% - Chip length maximum 15 mm - Installation temperature: temperature-controlled room at a minimum of +5°C - The feed material must be free of metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and/or increased wear can result.

Condition: like new (used), Year of construction: 2026, Our best-selling briquetting press, the classic. + Tried and tested, simple technology for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Options for an extra charge: * Surcharge for the level indicator that enables automatic operation + € 995 net * Surcharge for large pre-compression chamber + 980 € (recommended for light material like straw) Briquette diameter: 50 mm Front bush: 50 mm Briquette stroke max .: 40 mm Briquette lift opt ​​.: 40 mm Dcsdjgl Nlmjpfx Adrsn Throughput (depending on material): 30-60 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter . Motor power: 5.5 kW 400 volts / 50 Hz / 3 phases Length: 1680 mm Width: 1100 mm Height: 1500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1000 mm Silo content: approx. 0.7 square meters Pump: 27 liters Hydraulic pre-compressor Option cooling pressing tongs: no Hydraulic oil cooling option: yes Level monitoring option: yes CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Maximum chip length 15 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The customer must insure himself against loss of hydraulic oil - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: used, machine/vehicle number: 008228, Type of edging: Thin edge, Thick edge Dedpfx Aoz Nfb Iedrocn Gluing System: EVA Hotmelt Max feed speed: 8 m/min Maximum panel thickness: 40 mm Operating Units: 4 nr

Condition: new, Year of construction: 2026, Briquetting press NEM 900: production time appr. 5 months for briquetting aluminum chips Throughput: up to maximum 320 kg / h * more details after a free test with heard material . Briquette diameter: Ø 70 mm Optimal briquette length: 70 mm . Technical specifications: Total connection: approx. 31 kW In continuous operation approx. 22 kW 400 volts / 50 Hz / 3 phases Pump: 120 + 60 liters per minute Silo: 1 m³ Silo rollers: 1200 mm Dcodsgfm Ryjpfx Adrjn Including agitator Oil tank: 600 liters Dimensions: 2500 x 1700 x 1730 mm lxwxh Weight: 2250 kg. Hydraulic pre-compression via slide Main press cylinder Vertical cylinder Above for connecting a cooling unit . One and the source material - max.span: 18 mm - Excessive temperature: temperate room at at least + 5 ° C. - max.weight on agitator: 200kg. - The loading must be free of metals and mineral impurities such as sand, stones, etc. This on the pressing tools and / or responsible wear can result

Condition: as good as new (ex-display), Year of construction: 2025, Special price *available upon request New: With the frequency converter option, up to 45% state funding is possible. Combination of: mütek briquetting press MPP 60 + extraction unit MMJET 350 *Approved for indoor installation *Both individual machines are fully manufactured and in stock; they only need to be connected to each other Dcedpod Su Hxjfx Adrsn 1. Technical data of briquetting press: Our best-selling briquetting press, a classic. + Proven, simple technology for extremely low failure rates + 25 years of experience, continuous development, and know-how + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Commodity code: 84793010 Briquette diameter: 50 mm Front bushing: 50 mm Briquette stroke max.: 40 mm Briquette stroke opt.: 40 mm Throughput (material-dependent): up to 60 kg/h* *depending on the bulk density *based on a bulk density of 200 kg per cubic meter Motor power: 5.5 kW, 400 volts / 50 Hz / 3-phase Overall dimensions of the system: 2.2 x 1.1 x 2.8 m (L x W x H) Height - 2.8 m (special container) Delivery in 2 components possible Weight: approx. 1200 kg Oil quantity: 110 liters Silo diameter: 1000 mm Pump: 27 liters Hydraulic pre-compressor Option cooling press clamp: no Option cooling hydraulic oil: yes Option level monitoring: yes CE compliant 2. Technical data of clean air extraction unit MMJET 350: Extraction port diameter: 350 mm Motor: 11 kW Extraction nozzle on the left (when standing in front of the dust bin) Residual dust content:

Condition: reconditioned (used), Year of construction: 2023, Special price for a machine with low usage Base machine: €29,990 net Options available at an extra charge: - Cooling unit: €3,995 net - Emulsion tank: €3,990 net The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminum, copper, brass, bronze, graphite, and other non-ferrous metals into dimensionally stable cylindrical briquettes. The machines are characterized by a robust design that guarantees consistent briquette quality in continuous operation. The pressing process takes place without the addition of binders, solely through hydraulic pressure. The volume of the raw material can be reduced by up to 90%, depending on the material. Throughput: up to a maximum of 70 kg/h (material-dependent), Briquette diameter: Ø 50 mm, Motor: 5.5 kW, 400 volts / 50 Hz / 3-phase, Pump: 40 liters, . Dcjdpod N Dnhjfx Adrsn Maximum briquette length: 50 mm, Optional briquette length: 40 mm, Silo diameter: 1,000 mm, Oil tank: 110 liters. . Dimensions: 1750x1130x1100 mm (l x w x h) Weight: 950 kg. . Hydraulic pre-compression via slide valve Main press cylinder Vertical cylinder . Level sensor: yes . Requirements for the raw material - Max. chip length: 15 mm - Installation temperature: temperature-controlled room at a minimum of +5°C - Max. weight on the agitator: 150 kg - The feed must be free of magnetic metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may result.

Condition: new, Year of construction: 2025, Another machine immediately available! Briquetting press with PLC control and automatic briquette length adjustment Throughput: up to max. 60 kg/h Briquette: 50 mm cylindrical Motor: 5.5 kW Dimensions: 1,900 x 1,350 x 1,410 mm Weight: approx. 860 kg Requirements: Feed material should ideally be shorter than 25 mm chip length Moisture content 6–12% ATRO Machine suitable for intermittent operation. E.g. briquetting for up to 2.5 hours; 1 hour break, etc. Dcsdsv Rpxlopfx Adren If the machine needs to run longer than 2.5 hours continuously, optional cooling must be connected.

Condition: as good as new (ex-display), Year of construction: 2024, The ideal machine for shredding cables, including optimized cutting geometry, approximately 9 operating hours. Motor: 18.5 kW; 400 V - 50 Hz - 3 phase, Knives: 14 pieces, 40x40mm, multi-rotatable, Rotor diameter: 260 mm, Control: Omron PLC, Cutting chamber opening 600 x 800 mm, Hopper volume approx. 0.6 m³, Hydraulically actuated slide Screen size optional (15 - 40mm) Dcjdegmfa Aspfx Adrsn Extraction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (l x w x h) approx. 1737 x 1167 x 1650 mm The following options are available at an additional cost: - Double knife row + €1,990 net (28 instead of 14) - Surcharge for 4-sided segment base + €2,170 net (prevents the slide from jamming. Recommended when shredding plastics, paper, veneer with a thickness of less than 3 mm). - Raise shredder by 30 cm (preparation for conveyor belt) + €1,980 net - Inclined conveyor belt (discharge height approx. 220 cm) + €8,770 net - Over-band magnet + €6,980 net - Control for conveyor belt and over-band magnet + €2,750 net (Start and stop synchronized with the shredder) Bea9ia3l27 Requirements for the raw material: - Mineral impurities such as sand, stones, etc. lead to increased wear. We would be happy to offer a free test with your material. We invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material by freight forwarder and we will document the test with photos and videos.

Condition: like new (used), Year of construction: 2026, Special price for our demonstration machine Another machine, available immediately (ex works Neckartailfingen) Approx. 8 operating hours. Suitable for shredding residual wood of all kinds, including pallet sections. Pallets must be prepared with a saw or chainsaw so that they fit upright into the hopper – see image 2. Ideally, the dimensions should be approximately 40x20x20 cm so that the wood can lie flat on the sliding bed. This is when the machine operates most effectively. A hydraulic slide runs along the bottom of the shredder, pressing the wood against the rotor depending on the load. The material is shredded until it passes through the screen basket. Throughput rate up to 200 kg per hour *depending on the screen and how well the material is prepared. *Conveyor belt and overband magnet available at an extra charge. + Powerful 18.5 kW motor, + Concave blades, + Large high-performance gearbox, + Special, load-dependent slide control, Commodity code: 84659600 Motor: 18.5 kW; 400 V - 50 Hz - 3 ph. Blades: 15 pieces, can be rotated multiple times Optional double blade row + €995 net Rotor diameter: 260 mm Control: Siemens S7-1200 PLC Cutting unit opening 630 x 820 mm Dedpfedwktkox Adrscn Filling volume approx. 0.6 m³ Hydraulically operated slide Screen hole size selectable (10 - 30 mm) Suction nozzle Ø 160 mm Weight approx. 1,300 kg (depending on accessories) Dimensions (l x w x h) approx. 1737 x 1167 x 1650 mm Moisture content: < 30 % dry basis Standard features include: - V-rotor for maximum throughput - Control cabinet with Siemens PLC control - Automatic star/delta start - Fast hydraulics - Auto. OFF when the rotor is idling - Speed 70-90 rpm for high throughput performance - Cycle control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant - MADE IN GERMANY Options for shredder: - Raise the shredder by 30 cm (preparation for conveyor belt) + €2,080 net - Articulated conveyor belt + €8,770 net Horizontal part: 1200 mm Inclined part: 2500 mm Angle: Adjustable from 0-60 degrees Discharge height: approx. 2000 mm + - 100 mm - Overband magnet + €5,980 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) - Extend hopper + €940 net - Eco-rings: + €1,980 net (recommended for more than 15% hardwood) - Special scraper + €990 net (recommended for veneer or paper) - Double blade row + €995 net Requirements for raw material: - The moisture content (dry basis) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear.

Condition: excellent (used), Year of construction: 2016, operating hours: 4,500 h, functionality: fully functional, machine/vehicle number: A305/K1161, WDB flexo printing machine for UV inks. 4 printing units, printing width 1350 mm. The machine was used as a test machine for development purposes and has seen little use. The printing machine is operational and can be tested at any time. Dcjdpfxjxqml Es Adrjn

Condition: excellent (used), Catalog number: 7549 TECHNICAL DATA max. width of the workpiece 1100 mm max. height of the workpiece 170 mm 2 units: 1) grooved rubber roller for calibrating 2) rubber roller + shoe + metal roller – from above: metal roller, sliding unit Dcsdpfezty Rtex Adrjn metal roller, sliding unit with shoe metal output roller, sliding – from below: traction belt pneumatic belt oscillation electric table lifting 2 types of feed speed motor 11 kW with pneumatic brake operating pressure 6-8 bar diameter of the extraction nozzle 2x150 mm overall dimensions L/W/H 1960x1700x2000 mm weight approx. 2000 kg – manufactured in Germany – 2 units – unpainted – used sanding machine, very good condition Net price: 31900 PLN Net price: 7420 EUR, depending on the exchange rate of 4.3 EUR (Prices are subject to change due to significant fluctuations)

Condition: excellent (used), Year of construction: 2018, machine/vehicle number: 0-250-04-4777, functionality: fully functional, operating hours: 272 h, input voltage: 400 V, input current: 31 A, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 4,030 mm, travel distance Y-axis: 1,950 mm, workpiece length (max.): 3,100 mm, workpiece width (max.): 1,250 mm, workpiece height (max.): 160 mm, number of axes: 3, number of slots in tool magazine: 14, total height: 2,400 mm, total length: 6,850 mm, total width: 3,616 mm, overall weight: 3,250 kg, table length: 3,100 mm, table width: 1,250 mm, Equipment: documentation/manual, For sale is a 2018 HOMAG CENTATEQ P-110 3-axis CNC machining center, complete with all accessories shown in the pictures, clamping chucks, tools, spare drive components, and an Extract DUO two-bag dust extraction system. The machine has low operating hours and has been serviced annually by an authorized dealer. The machine can be inspected while in operation. The sale price includes professional disassembly and loading onto a truck for transportation. The buyer is responsible for arranging and covering the costs of transportation. Primary usage: 272 h Secondary usage: 193 h Total usage: 22891 h Work table: Dcsdpoz E Rinsfx Adren X = 3100 mm, Front stop Y = 1250 mm, Rear stop Y = 1550 mm, Z = 160 mm Main spindle power: 10 kW Travel speed: X/Y = 60 m/min X = 35 m/min Y = 50 m/min Z = 15 m/min Bumper – safety system EN1760-3 14 tool storage spaces on the moving part and an additional 8 on the fixed part Technical specifications of the included dust extraction system: Fan power kW: 5.5 Filter surface area m2: 36 Filter bag diameter mm: 800 Number of dust bags: 2 Airflow rate m3/h: 6000

Condition: good (used), Clean air extraction system Used machine, in good condition Images to follow Dsdperb D Nofx Adrscn mobil Jet 160, Connection 160, Fan 2.2 kW Air flow rate 1850 m³/h, 400 V

Condition: new, Year of construction: 2026, Diameter: 160mm Also available in the diameters: 180, 200, 250, 300 mm for an additional charge, other diameters on request. Very stable industrial design. Ideal for separating nails/metal parts from material flows. For example after a wood shredder. including 3 extremely powerful magnets * If desired, up to 6 magnets can be installed in the component - surcharge for each additional magnet + 49 € - Neodymium magnets are also available instead of ferrite for an additional charge Your advantages: Dedechuvrspfx Adrecn + Extremely large inspection door with seal for easy stripping of the nails + Stable quick-release fastener +Made in Germany Inspection door / opening: 35x18 cm Installation length may vary

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, 1,0 ST. Gebr. Zwei Komponenten Spritzgiessmaschine das zweite Aggegeat ist seitlich angebau Hersteller: NETSTAL Typ: SYNERGY 1750-900-230 Baujahr: 2016 Schließkraft: 175 Tonnen Holmabstand: 510 x 510 mm Schneckendurchmesser 1: 50 mm Spritzteilgewicht 1: 377 g/PS Schneckendurchmesser 2: 25 mm Spritzteilgewicht 2: 47 g/PS Ausstattung: Kernzüge 2 x DS / 1 x AS Zweites Aggregat ist seitlich angebaut Dodpfx Asz Nmi Hjdrscn Roboter Wittmann, Baujahr: 2016

Year of construction: 2010, condition: used, Precise fill level control for detecting underfilling and overfilling of bottles. P max: 10 bar Current: 8 A Voltage: 230 V Frequency: 50 / 60 Hz Length: 1,2 m Width: 0,93 m Dodpfjztzcdsx Adrjcn Height: 2,2 m Weight: 350 kg Features: detection of fill height and closure, inkl. mouth blowing and discharge with collecting table

Condition: good (used), Year of construction: 1987, machine/vehicle number: 12871, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 380 V, pressing force: 112 t, oil tank capacity: 120 l, total length: 3,300 mm, total width: 2,150 mm, total height: 2,500 mm, overall weight: 10,000 kg, controller manufacturer: DELEM, controller model: EA 22, working length: 3,100 mm, DARLEY EHP 110 31/25 press brake Dsdpfxjz I N D Ne Adrscn - including foot switch and the bending tool located on the machine FCA D-35614 Aßlar - loaded onto a truck

Condition: used, Year of construction: 2012, power: 110 kW (149.56 HP), Hargassner 110 kW – Biomass Boiler (Pellet / Wood Chip) – 2 Units Available, Cascade Operation Possible For sale is a Hargassner 110 kW fully automatic biomass boiler in a modern design (year of manufacture: 2012). ⚠️ 2 identical boilers available! ➡️ Ideal for cascade operation up to approx. 220 kW ➡️ High operational reliability and optimal performance modulation — Technical Data: • Year: 2012 • Output: 102–109 kW • Combustion output: up to 116.5 kW • Max. temperature: 95 °C • Max. pressure: 3 bar • Water volume: 190 liters Dsdpfx Adoy A Ei Norjcn • Weight: approx. 1010 kg — Key Features: • Fully automatic operation • Lambda sensor → automatic combustion control • Modulating output (demand-based adjustment) • Automatic cleaning and de-ashing • 3-pass boiler → high efficiency • Fireclay-lined combustion chamber → clean combustion • Automatic grate (self-cleaning) • Very low power consumption (~0.18 kW) • Modern, energy-efficient system — Feeding Technology / Equipment: • Incl. feed auger (standard equipment) • Currently equipped with an automatic pellet suction system (vacuum system/suction feed) ➡️ Very simple pellet operation: • Connection to pellet storage via flexible hose • System automatically draws pellets into the boiler • Fully automatic operation without manual feeding ➡️ Optional: Can also be used for wood chip operation (by connecting to a discharge system) — Condition: • Recently dismantled • Was fully operational until dismantling — Inspection: Viewings are possible by appointment at our 1,500 m² warehouse in Mosonmagyaróvár, Hungary TOP HEATING SYSTEMS – Used Heating Systems, Boilers, Heat Pumps & Accessories Direct from Stock We are a family business with around 20 years of experience in heating technology, boasting a 1,500 m² warehouse in Mosonmagyaróvár, Hungary, with a constantly available stock of approx. 50–60 units. 📍 Location: Our warehouse is located in Mosonmagyaróvár, Hungary – approx. 15 km from the Austrian border and about 80 km from Vienna. Mosonmagyaróvár is the first major city on the Hungarian side after the Austrian border. 🔥 Our inventory includes: • Wood chip boilers • Pellet boilers • Wood gasification boilers • Log wood boilers • Biomass boilers • Oil and gas boilers • Heat pumps • Thermal ventilators • Hot air blowers • Warm air heaters • Industrial heaters • Buffer tanks • Heat exchangers • Feed augers • Discharge systems • Burners • Pumps • Extensive heating accessories ⚙️ Accessories and Components: Additionally, we have a wide range of accessories, including circulation pumps, plate heat exchangers and many other components – from small-scale applications to industrial-scale solutions. 🏭 Brands in our range: Fröling, Hargassner, KWB, HDG, Binder, ETA, Herz, Guntamatic, Windhager, Viessmann, Buderus, and many more. 🌐 Current Offers: Most of our current offers can be found on our website: topheatingsystems.com In addition, we have further units that are not yet listed. 📅 Inspection: A viewing at our warehouse is possible by prior appointment. If you are interested, please contact us – we will help you find the right solution.

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 230 V, type of input current: AC, laser power: 30 W, type of cooling: air, overall weight: 45 kg, height adjustment type: electric, scan area length: 110 mm, scan area width: 110 mm, laser wavelength: 1,064 nm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, The LAS 22 is a compact tabletop unit with a small working area, ideally suited for small parts. Due to its small size, the system is very practical and can be used anywhere. The universal laser marking system LAS 22 from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser, you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20 or 30 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a handheld scanner is also possible. The standard equipment includes a laptop with Windows operating system and laser software. Optionally, the laser model LAS 22 can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. - Fiber laser 30 Watt (Optional: 20 Watt) - Laser class 1 - Wavelength 1064nm - Marking field size 110 x110mm - marking software EZCAD in German / English - Pilot laser (simple preview/contour) - Focus finder (simple focusing) - Max. Component height approx. 95 mm - Grid holes for fixtures - Clamping area 310x190mm - Electrically adjustable Z-axis - Electric door with pinch protection - optional: exhaust system (incl. activated carbon filter) Dcodpfsuy H Nqex Adrjn - Welded steel plate construction - Connection 230V - Air cooled - Laptop with Windows operating system (German or English) - dimensions: LBH 600x 400x 690 mm - weight: approx. 45 Kg - low operating costs - marking of various materials

Condition: used, Year of construction: 2017, machine/vehicle number: 0-261-06-6108, functionality: fully functional, operating hours: 1,532 h, Equipment: CE marking, documentation/manual, The machine is used in a small carpentry workshop and has been continuously maintained. It is currently in daily use, and all its functions are working properly. This is not a machine from a dealer; you can test it while it is in operation at our facility. Key specifications and features: • Manufacturer: HOMAG • Model: KDF 110 • Year of manufacture: 2017 • Operating hours: only 1532 hours • Number of processed workpieces: approx. 103,500 Dodpfezyck Aex Adrjcn • Pre-milling unit • Glue application unit • End trimming unit • Top/bottom edge trimming • Profile/radius scraper • Cleaning/scraping of glue joints • Polishing unit • Touchscreen control • User interface in Hungarian • 400 V / 3-phase The machine is in good technical and aesthetic condition, considering its age. The machine is being sold because we are receiving a new edge banding machine, and it will remain in use until the end of October 2027. We will arrange a meeting in advance with serious potential buyers, and the machine can be viewed and tested while it is in operation at our facility until then.

Year of construction: 2020, operating hours: 100 h, condition: excellent (used), functionality: fully functional, overall weight: 300 kg, total length: 1,330 mm, total width: 840 mm, total height: 1,870 mm, compressed air connection: 6 bar, type of input current: AC, Tray-Loader TL-6040 - 2-lane stack-on module for the economical transport of trays (boxes) for printed circuit boards. The empty trays are removed from the transport carriage, automatically positioned and made available for assembly. After placement, the trays are automatically destacked on a 2nd transport trolley. - Compact design - Small floor space Dedsxuqtbopfx Adrecn - Stacking module - Transport trolley - Standard tray size: 400 x 600 mm - Sturdy welded steel frame - W x D x H: 840 x 1,330 x 1,870 mm - Manual operating height: 930 - 1,050 mm - Compressed air 0.6 mPa (6bar), oil-free, filtered, dry - Average consumption approx. 10l/min - Ambient temperature +18°C - + 30°C - Weight approx. 300 kg

Condition: ready for operation (used), Year of construction: 2020, A water jet cutting system Expert Systemtechnik with a high-pressure pump BFT is available. 1) Cutting system Expert Systemtechnik cutEXPERT variojet, year of manufacture: 2020, product: leather/foam materials/technical textiles/rubber materials/composite materials/packaging material, max. cutting speed: 70m/min, repeat accuracy: +/-0.2mm, water consumption: approx. 0.2l/min, cutting dimensions X/Y: 1800mm/3000mm. 2) High-pressure unit BFT Servotron 40.45+, year of manufacture: 2020, drive power: 45kW, max. flow rate: 4.6l/min, design pressure: 4200bar, max. operating pressure: 4000bar. Machine dimensions X/Y/Z: approx. 2000mm/1000mm/1400mm, weight: approx. 1200kg. Documentation available. An on-site inspection is possible. Dcjdpfxexmkcmj Adren

Condition: like new (used), Year of construction: 2020, operating hours: 550 h, functionality: fully functional, fuel type: electric, color: blue, empty load weight: 248 kg, gearing type: automatic, For sale in new condition, battery-powered, driver's seat sweeper, cleaning machine WEIDNER STAR 110E 6500nm2 industrial sweeper new work batteries! manufacturer Weidner KS1-00110E year of manufacture: 2020. hours of operation: 550 h STAR 110 Technical characteristics: Working width adjustable main brush: 700mm Working width with 2 side brushes: 1,100 mm Electrical system: 24v 4X 6V /180AH work battery NEW!!! Working capacity: max. 6,800 m2/h Practical working capacity: max. 5000 m2/h Garbage container: 68 liters Large panel filter - antistatic cellulose surface: 6 m2 with electric filter shaking Adjustable main brush, Liftable “flap” for easier sweeping of larger pieces of garbage Direct sweeping into the container Battery charge indicator Operating hour counter Dedpjzf Avijfx Adrjcn 24V Automatic charger Dust-free sweeping thanks to vacuuming, Vacuum interruption for sweeping wet areas, Dimensions (lxwxh): 1453x897x1230 mm weight: 225kg + battery pack

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: AC, total width: 900 mm, total length: 900 mm, total height: 1,800 mm, energy consumption: 11 kWh, Equipment: CE marking, documentation/manual, We offer this new RPE RPE-110 plastic/Cable/wood etc processing machine, year of construction 2025. The machine is designed for efficient shredding of both soft and hard plastics. It can also process materials such as cardboard, paper and wood, making it a versatile solution for recycling and waste-processing applications. The cutting rotor is fitted with 15 movable knives arranged in three rows, working together with 2 fixed knives mounted on the cutting chamber cover. The cutting chamber can be opened easily, providing convenient access for inspection, cleaning and maintenance. This design also allows the cutting knives and screen to be replaced quickly. The knives can be sharpened and reused several times, helping to reduce operating costs. Technical Specifications Motor: 11 kW, 400 V Capacity: up to 650 kg/h, depending on the type of material Screen perforation: 10 mm Dcedpfoz Ikwdsx Adron Rotor diameter: 260 mm Rotor speed: 560 rpm Cutting system: 15 movable knives + 2 fixed knives Cutting chamber: 500 × 370 mm Noise level: 80–95 dB Machine dimensions: 1420 × 1030 × 1410 mm Net weight: 780 kg The cutting chamber measures 500 mm in width and 370 mm in length. A 10 mm screen is supplied as standard, while a 6 mm screen is also available as an optional accessory. The crusher is suitable for processing a wide range of materials, including: Plastic bottles Wooden boards Various plastic products such as soles, strips, profiles, mouldings and film Materials containing small amounts of metal, such as cables and electronic boards Paper, cardboard and paper waste Rubber products With a rotor speed of 560 rpm, the machine is designed to minimize heat generation and prevent excessive melting of the processed material. The powerful 11 kW motor, combined with the heavy-duty flywheel, provides sufficient power for processing demanding and hard plastic materials. The machine can achieve a throughput of up to 650 kg/h, depending on the characteristics and type of material being processed. A practical pull-out waste drawer allows the processed material to be removed quickly and conveniently. The drawer is fitted with four wheels for easier handling. Easy access to the cutting chamber simplifies routine maintenance, inspection and knife replacement. The machine is equipped with a main power switch, emergency stop and clearly arranged control panel. Safety systems are designed in accordance with the applicable EU safety requirements. For optimum performance, the material introduced into the machine should be pre-cut or supplied in a suitable size. The appropriate input fraction depends on the type and characteristics of the material. Safety and CE Certification The crusher is CE certified. Each opening/cover is fitted with a limit switch, preventing the machine from operating while the cutting chamber is open during maintenance or inspection. Drop Chamber Dimensions Width: 500 mm Height: 260 mm The machine is fitted with adjustable support feet, allowing accurate horizontal leveling during installation. Optional Equipment For an additional charge, the machine can be supplied with a waste drawer equipped with an exhaust connection, suitable for connection to an external extraction system. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Simplacutter model IV 110×160 Cauhe die cutter The machine is fully operational, like new. Made in Spain. Frame size: 1100×1600 mm Dcedpfsz Dtb Dox Adron Sheet size: 1160×1680 mm Weight: 8500 kg Power supply: 380 V Installed power: 7.5 kW Impact force: 350 t Equipment: – pneumatic clutch and brake – control panel – two frames – 2 operating modes: time-delayed, manual – central lubrication – additional safety guards – safety pressure mats – operating tools – hard sheet metal