Eddy Current separator

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2005, operating hours: 5,125 h, load capacity: 5,000 kg, lifting height: 4,000 mm, free lift: 900 mm, fork length: 1,200 mm, TECHNICAL DETAILS Mast Lifting capacity: 5,000 kg Lifting height: 4,000 mm Free lift: 900 mm Overall height: 3,340 mm Fork carriage: FEM 4 Fork length: 1,200 mm MACHINE DETAILS Mast: Standard (2S400) Drive: 4-cylinder diesel engine Fuel type: Diesel Engine manufacturer: Perkins Tires: Pneumatic tires Front tires: 8.25-15 Rear tires: 8.25-15 Front tire condition: 60% Rear tire condition: 60% Dimensions & Weight Dimensions (L x W x H): 4,450 x 2,000 x 3,340 mm Cedpfxoz H Rype Adrjrh Total weight: 8,150 kg Operating hours: 5,125 h EQUIPMENT Full cabin Heater

Condition: new, Year of construction: 2024, operating hours: 1 h, functionality: fully functional, Eddy Current separators from the Magnetic Series are mainly used in the waste recycling industry. The use of eddy currents allows for the recovery of non-ferrous (non-magnetic) metals from loose waste such as aluminum, copper, brass etc. The WPS separators are characterized by high separation accuracy due to the original solutions by ZŁOMIARZE, which guarantees high profitability of waste recycling. Wps separators are used in the recovery of: non-ferrous metals from the recycling of electronic waste non-ferrous metals from car recycling metals from foundry waste aluminum in glass recycling processes non-ferrous metals from steel waste non-ferrous metals from municipal waste Codeu Dg Uhspfx Adrerh Description of Operation: The material delivered by the vibratory feeder is placed on the conveyor belt of the eddy current separator. The separator belt transports the material toward the high-speed magnetic rotor. The magnetic rotor creates high-frequency magnetic field by using maximized system of alternating magnetic fields. The alternating magnetic field induces eddy currents in metals. These currents counteract the external field and lead to the rejection of colored metals outside the material stream. A divider installed at the end of the separator is provided for the separation of materials. The central magnetic rotor has been designed to handle the smallest materials, providing the ability to recover particles up to 1 mm in diameter. We also have larger sizes of eddy current separators - catalog in documents.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, operating hours: 145 h, load capacity: 2,000 kg, lifting height: 3,805 mm, fork length: 1,000 mm, empty load weight: 3,589 kg, TECHNICAL DETAILS Load capacity: 2,000 kg Lifting height: 3,805 mm Overall height: 2,460 mm Fork carriage: FEM 2A Fork length: 1,000 mm MACHINE DETAILS Mast: Standard (2W380) Drive type: Electric Dimensions & Weight Credpfx Adsz H Rvqoroh Dimensions (L x W x H): 2,150 x 1,100 x 2,460 mm Total weight: 3,589 kg Battery voltage: 48 V Battery capacity: 690 Ah Battery year of manufacture: 2006 Charger: Three-phase, 48 V, 80 A (not tested) Front tires: Superelastic, 200/50-10 Rear tires: Superelastic, 18 × 7-8 Front tire condition: 70% Rear tire condition: 70% Operating hours: 145 h EQUIPMENT 3rd valve Impulse control Side shifter

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, operating hours: 10,933 h, load capacity: 1,600 kg, lifting height: 3,100 mm, free lift: 1,500 mm, mast type: duplex, fork length: 1,150 mm, TECHNICAL DETAILS Load capacity: 1,600 kg Lifting height: 3,100 mm Free lift: 1,500 mm Overall height: 2,050 mm Fork length: 1,150 mm Fork carriage: FEM 2A MACHINE DETAILS Mast: Duplex, 2F310 Crsdpfx Adsz H Rutereh Drive: Electric Front tires: Superelastic, 18x7-8 Rear tires: Superelastic, 15x4.5-8 Condition of front tires: 70% Condition of rear tires: 10% Battery voltage: 48 V Battery capacity: 625 Ah Battery year of manufacture: 2019 Charger: 48 V, not tested Dimensions & Weight Dimensions (L x W x H): 1,850 x 1,070 x 2,050 mm Weight: 3,168 kg Operating hours: 10,933 h EQUIPMENT 3rd valve Work light, front Side shifter

Condition: new, Year of construction: 2025, Turbo mill MTR-800 This turbo mill is designed for grinding, crushing, and granulating materials to improve the quality of final separation in subsequent recycling processes. Technical data: - Installed power – 75kW or 90kW - Chamber width – approx. 910mm - Chamber diameter – approx. 620mm - Number of abrasive knives – approx. 89 pcs. Credpfsv I S Ukjx Adreh - Number of abrasive counterknives – 18 pcs. - Structure mounted on adjustable vibration isolators - Dimensions – 2200 x 1600 x 1550mm - Chamber opening via a manual hydraulic pump - Engine base with a rocker-type tensioner - Weight – approx. 1950kg - Discharge ends with an orifice of fi-150 - Electrical installation with inverter included in the price.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, operating hours: 12,543 h, load capacity: 4,000 kg, lifting height: 4,000 mm, fork length: 1,350 mm, empty load weight: 6,170 kg, TECHNICAL DETAILS Load capacity: 4,000 kg Lifting height: 4,000 mm Overall height: 2,750 mm Fork length: 1,350 mm Fork carriage: FEM 3A MACHINE DETAILS Mast: Standard (2W400) Drive type: Internal combustion engine Fuel: Liquefied petroleum gas (LPG) Engine manufacturer: GM Engine model: Vortec V6 Engine: 4-cylinder internal combustion engine Front tires: Superelastic 8.25 - 15 Front tire condition: 80% Rear tires: Superelastic 28 x 9 - 15 Rear tire condition: 80% Dimensions & Weight Dimensions (L x W x H): 3,000 x 1,400 x 2,750 mm Weight: 6,170 kg Operating hours: 12,543 h EQUIPMENT 3rd valve 4th valve Front work lights Rear work lights Windshield Half cab Fork extension Push forks Credpfxoz H Rkzj Adrsh Side shifter

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2018, operating hours: 10,555 h, load capacity: 3,000 kg, lifting height: 3,300 mm, construction height: 2,270 mm, overall weight: 5,507 kg, Equipment: sideshift, TECHNICAL DETAILS Load capacity: 3,000 kg Lifting height: 3,300 mm Codpfx Adez H Rhaororh Overall height: 2,270 mm Fork length: 1,200 mm MACHINE DETAILS Drive type: Electric Battery voltage: 80 V Battery capacity: 500 Ah (Li-Ion, year of manufacture: 2021) Charger: 80 V - Li-Ion Weight: 5,507 kg Operating hours: 10,555 h EQUIPMENT 3rd valve 4th valve Rear work light Front work light Heater Full cabin Side shifter

Year of construction: 2023, condition: used, functionality: fully functional, THM Recycling Solutions Granulation System Credpszhudwsfx Adroh Plastics Shredder, Granulation and Washing System comprising THM Recycling Solutions granulation unit with: THM FR300/235/215-25-7500 inlet belt conveyor (2024) THM ZM 1000 granulator (2023) THM FR300/235/215-25-7500 outlet belt conveyor (2024) HAG HA-SNP-P-20-14-0-7.5 hydraulic unit,12 bar Pierret guillotine cutting system with: Pierret G35RI guillotine cutting machine Pierret G28RI guillotine cutting machine 2x belt conveyors for infeed and outlet

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2009, operating hours: 17,600 h, controller model: Siemens Sinumerik 840 D, laser power: 5,000 W, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 15 mm, sheet thickness aluminum (max.): 10 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Power: 5,000 W Steel sheet thickness: max. 20 mm Stainless steel sheet thickness: max. 15 mm Aluminum sheet thickness: max. 10 mm Cutting speed: max. 60/85 m/min Crodpfx Aoz Hxu Uedrsh Accuracy: ± 0.1 mm Table dimensions: 3,000 × 1,500 × 115 mm MACHINE DETAILS Control system: Siemens Sinumerik 840 D Dimensions & Weight Dimensions (L x W x H): 9,300 x 4,600 x 2,000 mm Total weight: 13,140 kg Operating hours Beam on: approx. 17,600 h Laser on: approx. 45,500 h

Condition: ready for operation (used), Year of construction: 2013, operating hours: 28,500 h, functionality: fully functional, load capacity: 235 kg, arm reach: 2,550 mm, load center: 300 mm, torque: 1,324 Nm, positioning accuracy: 0.07 mm, For sale is a machinery package consisting of 10 robot arms from the manufacturer ABB, along with the necessary accessories! The package is composed as follows: 8x Welding robots for external connection 2x Handling robots 10x Control cabinet 10x Main power cable for robot cabinet 10x Communication cable for robot cabinet 10x Panel with connection cable to the cabinet 1x 40" HC sea container TECHNICAL DETAILS Reach: 2.55 m Handling capacity: 235 kg Center of gravity of the payload: 300 mm Wrist torque: 1,324 Nm Positional repeatability: 0.07 mm Path repeatability: 0.7 mm MACHINE DETAILS Control cabinet type: IRC5 M2004 Operating panel: FlexPendant Operating panel model: DSQC 679 Input voltage: 3 × 400 V AC Frequency: 50–60 Hz Current consumption: 20 A Crodpsz D H Hyefx Adroh Operating hours: between 28,500 and 39,000 hours EQUIPMENT Cable set for main connection cabinet–robot Leoni mounting Cable set for handling or welding Note regarding dismantling and loading: As can be seen in the pictures, the manipulators are located in the 40" HC container. The robots are screwed onto the pallets (with 2 screws each), and the control cabinet is secured to the pallet with lashing straps. Further securing/lashing must be carried out by the buyer.

Year of construction: 2021, operating hours: 480 h, condition: like new (used), functionality: fully functional, Electrostatic separator (corona) - EBS-4-271200 - builded to extract the metals from the rejection of the plastic from electric cable process Including additional options: - 3 screw transporters; - 3 m3 input hopper; - mechanisms for changing material flow and stand for big bag for mix collection; Crsdpjwcp I Asfx Adrjh - touch screen for control cabinet english / rusian language; - set of spare parts Designed for dry high-efficiency separation of materials, that are differ in their electric properties: - mixtures of plastics and metals, including shredded cables, into metal (copper, aluminium), and non-conducting material (plastic); - mixture of different materials, provided that one of the components has conducting properties (extraction oftextilecord from rubber crumb in the processing of used tires ); - shredded WEEE (including PCB’s) into metal (aluminium, copper, nickel, bronze, and other) and nonconducting materials (plastic, textolite, fiber-glass plastic, and other), and also for: - separations of non-metal raw material (feldspar, pegmatite, quartz sand); - enrichingofdroughconcentratesofores of rare metals (titan-zirconia, tantalum- niobic, tin-tungsten, monazite), ores of precious metals (gold, silver); - benefication of diamond ore. The equipment was purchased at the end of 2021 directly from the prestigious manufacturer PRODECOLOGIA, which also installed it in our factory. The equipment works perfectly and can be tested at any time with PVC plastic, from our Guidetti plant for electric cable recycling. Upon request, we can also provide installation + commissioning at the buyer's location. PRICE : 108 000 EURO- netto

Condition: ready for operation (used), Year of construction: 2013, operating hours: 28,500 h, functionality: fully functional, load capacity: 235 kg, arm reach: 2,550 mm, load center: 300 mm, torque: 1,324 Nm, positioning accuracy: 0.07 mm, LOT scope: 3x welding robots for external connection 2x handling robots 5x control cabinets 5x main power cable for robot cabinet 5x communication cable for robot cabinet 5x panel with supply line to the cabinet Operating hours: between 28,500 and 39,000 hours Csdpfsz D H Drex Adrjrh Manufacturer: ABB Model: IRB 6640-235/2.55 Type: IRB 6640 M2004 Reach: 2.55 m Handling capacity: 235 kg Center of gravity of payload: 300 mm Wrist torque: 1324 Nm Positional repeatability: 0.07 mm Path repeatability: 0.7 mm 3x 400V AC 50-60 Hz 20 A Accessories: Control cabinet: Type: IRC5 M2004 Operating panel: FlexPendant Model: DSQC 679 Cable set: Main connection cabinet to robot Leoni add-on: Cable set for handling or welding

Condition: refurbished (used), Year of construction: 2005, laser type: CO₂ laser, laser power: 100 W, working length: 1,330 mm, working width: 1,630 mm, TECHNICAL DETAILS Working area (L × W): 1,330 × 1,630 mm Laser power: 100 W Laser source: CO₂ Maximum material width: 1,575 mm Material pass-through: 15–50 mm (without material support) Speed: 1 – 1,414 mm/s Maximum acceleration: 14.1 m/s² Crodpfxoz D E Dds Adrjh MACHINE DETAILS Suitable for: Films, acrylic, wood, and textiles Dimensions (L × W × H): 2,730 × 2,450 × 1,590 mm EQUIPMENT i-cut Production Console software package

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 2 h, functionality: fully functional, Cable Granulation Plant GUIDETTI SINCRO MILL 530 + Pre-shredder PMG-H 900 – Immediately Available – As New For sale is a high-quality cable recycling plant from the Italian manufacturer Guidetti, consisting of: • Guidetti Sincro Mill 530 cable granulation plant • Guidetti PMG-H 900 pre-shredder • External filtration unit Crsdpey Ahlyofx Adreh The system was installed, tested at a customer site, and then professionally dismantled. Due to a project change, the plant is now for sale. Condition: Nearly new (test operation only) Availability: Immediate ex stock – no lead time Price: Significant savings compared to new equipment — Special advantages: • Immediately available – no long lead times as with new machines • Only operated for test purposes – correspondingly minimal wear • Complete system incl. pre-shredder • Proven Guidetti technology — Description: The Sincro Mill 530 is a compact, fully integrated cable granulation plant for processing mixed copper and aluminum cables – without pre-sorting. The system consists of: • Granulator (cutter mill) • Zig-zag separator • Turbo mill for fine grinding • Dry separation table Material purity up to 99% can be achieved. In combination with the PMG-H 900 pre-shredder, the system offers a high-performance recycling line for industrial applications. — Technical Data Sincro Mill 530: • Throughput: 450 – 600 kg/h • Motor power: 53 kW • Dimensions (L x W x H): 3410 x 1515 x 4395 mm • Weight: approx. 2,700 kg • For processing copper and aluminum cables — Technical Data Pre-shredder PMG-H 900: • Power: approx. 38.5 kW • Dimensions (L x W x H): 2110 x 2070 x 2245 mm • Weight: approx. 2,840 kg Suitable for pre-shredding cables, non-ferrous metals, and plastics. — Note: The plant is available at short notice. Subject to prior sale. Inspection by appointment possible.

Condition: good (used), Year of construction: 2012, operating hours: 43,313 h, controller model: Siemens Sinumerik 840 D, laser power: 5,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Laser power: 5,000 watts Working area: 3,000 × 1,500 × 115 mm Max. sheet thickness, steel: 25 mm Max. sheet thickness, stainless steel: 20 mm Crjdpfxsz D Evao Adrsh Max. sheet thickness, aluminum: 20 mm Max. speed: 235 m/min Accuracy: 0.10 mm MACHINE DETAILS Control model: Siemens Sinumerik 840 D Operating hours: 66,934 h / 43,313 h Dimensions & weight Dimensions (L x W x H): 8,300 x 4,800 x 2,400 mm Weight: 12,000 kg EQUIPMENT Solid-state laser TruDisk 3001 with one LLK output Light guide cable according to standard layout Laser cooling unit (water-air) Excitation via pump diodes Laser power control Laser logbook function Universal cutting head with fully adaptive lens system Protective glass against lens contamination Condition monitoring of the protective glass ControlLine: Height control and sheet edge detection