Electrostatic separator (corona) - EBS-4

PRODECOLOGICA Electrostatic separator- EBS-4

Condition: like new (used), functionality: fully functional, The static autoclave bases its sterilization system on the heat and cold transmission system by means of a water cascade. This autoclave is suitable for products that do not require movement during the sterilization process. The water, by means of a pump, is passed through a stainless steel plate exchanger for indirect heating. The heating and cooling of the water, which we use in all the cycles of the process, is carried out in the plate heat exchanger by means of steam or cold water. PRODUCTS: CANNED VEGETABLES, PASTA, PRE-COOKED FOODS, JUICES AND BEVERAGES, MEAT PRODUCTS, PATES, CANNED FRUIT, FISH. Dedpfxjwn Hgts Ah Sokg Features: Diameter: 1380mm. Basket: 1X0.99X0.93m. Heat exchanger. Automated loading and unloading. Operation by waterfall system. Control panel. Valves.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, - Motherboards IQ2/IQ3 Used and New - Display Sigle Line IQ2/IQ3 New - Display Dual Line IQ3 New - Touch Display IQ3+ Used - Receiver/Transmitter Boards IQ3 Used Djdou I Rrlopfx Ah Sekg

Condition: new, Year of construction: 2009, functionality: fully functional, Typ: SESOTEC Genius+ Tunnel size: 250x200mm Product dimensions: 200x160 (bxh in mm) Conveyor belt length: 1.500mm Conveyor belt width: 200mm Conveyor belt height: 800+/-100mm Basic sensitivity: FE: 1,2mm; NFE: 1,5mm; SUS: 2,0mm Dsdpsq Suytofx Ah Sskg Year of manufacture: 2009 Conveyor belt: PU-belt Conveyor speed: ca 25m/min Drive: drum motor Supply voltage: 230V / 50Hz Reject: double blow nozzle Operating direction: in running direction right Accessoires: 1 set test pieces

Condition: new, Year of construction: 2025, functionality: fully functional, Type: MN 7.0 FL100 Nominal width: 100mm Basic sensitivity: FE: 0,6mm; NFE: 0,8mm; SUS: 1,2mm Frequency: Hoch Year of construction: 2017 Specific features: new device Djdpfx Ahom E U Ume Sjkg Typ: Digital 2 VA100 Nominal diameter: 100mm Basic sensitivity: FE: 0,6mm; NFE:0,8mm; SUS:1,2mm Frequency: high Year of manufacture: New device Special features: Compact design with integrated automatic ejection system and funnel pipe diameter: 100mm

Year of construction: 2018, condition: ready for operation (used), Suitable for grinding calcined coke, feed material diameter: 0-20mm, moisture feed material: under 0.1%, measurement: NEA Malvern analysis, with pendulum mill, automatic filling station, BigBag unloading station, dust filter, pipe chain conveyor, transition piece, metal separator, bunker, two-way distributor, dosing sluice, control cabinets, steel construction, documentation and additional elements, the system is still in its original packaging and has been stored for two years. Dkedjnxk Ixepfx Ah Sjg

Condition: ready for operation (used), Archive photo Machine is currently being refurbished, delivery time 3 months Sorting machine for sorting out all non-ferrous and ferrous metals The machine can sort out ferrous metals separately, ferrous iron does not have to be separated out beforehand. Test sorting in the Habdaufkege process possible. The machine will be demonstrated in working order. The sale is without guarantee and warranty, commissioning possible worldwide for an additional charge. Dkodpfx Ajiqk Aqsh Ssg

Year of construction: 2018, condition: excellent (used), functionality: fully functional, TYPE 318:: COATING DRUM 1600 For the application of various taste and aroma giving materials by using various aromatising techniques. The special drum profile offers following main advantages: - optimal rolling of the product for uniform coating - minimum possible friction/damage of the product surface - no hidden corners, easy to clean, bacteriologically optimal surface. Adjustable drum speed, by frequency controlled AC gear motor 1.5 kW. Drum diameter: 1600 mm Drum length: 4000 mm Drum height : 3270 mm TYPE 284:: DRUM DRIER/ROASTER 1600 PTFE Newly developed short and medium range infrared roaster for special thermal post treatment of expanded extrudate. The whole drum is coated with a low-wear PTFE-layer. This secures processing of extremely sticky coated extrudates. Unlike the conventional hot air drying process, this drying system works with a very high degree of efficiency. The whole machine is made of rust free stainless steel. The radiation elements are attached to a common carrying arm in the drum. The roasting drum runs on special, low-noise carrier rollers and corresponds to the safety regulations and is equipped with a corrosion free covering to reduce energy losses. The rpm of the drum is adjustable continuously. The drive is carried out by a three-phase motor 1.5 kW. Drum diameter: 1600 mm Electrical heating power: 126 kW Drum length:4300 mm Drum height : 2960 mm TYPE 361:: COOLING DRUM 1600 Dodpfxewbqx Ho Ah Sskg For cooling of sticky and hot extruded products under rotation for separation. The cooling is carried out with the help of room air, which is blown controllably into the drum by a middle pressure blower 1.85 kW AC. Please note: depending on the product characteristics, additional cooling might be necessary for breakfastcereals before the product can be packed. Drum diameter :1600 mm Drum length: 4000 mm Drum height : 2890 mm

Condition: ready for operation (used), Two Machines Dodsxlknmjpfx Ah Sjkg Flake Purifier+ C 512 HR Color Sorter & Flake Purifier+ N 1024 Sesotec Polymer sorter Specs on Flake Purifier+ C 512 HR Color Sorter Refurbished in 2021 Technical Data Throughput up to (kg/h) Up to 3.8 Suitable grain sizes 2 - 20 mm Power (max. KVA) 3.4 Temperature range +5"C to + 40"C Weight 1300 to 1500 kg Electrical connection Power connection cable 5x4 mm2 Electric fuse 16 A Protection class IP 54 Rated current (max. A) 5 Specs on Flake Purifier+ N 1024 Sesotec Polymer sorter Technical Specifications • Working width: 1024 mm • Nozzle grid / valve spacing: 3.2 mm • Number of valves: 160 high-speed air-eject nozzles • Detection resolution: 2 mm (optical) / 16 mm (metal) • Metal detection sensitivity: Fe ≈ 0.6 mm | Al ≈ 0.1 mm • Throughput capacity: up to 3 – 3.8 t/h (depending on material and sensor setup) • Sorting technology: CCD color camera + metal detector (“CM” configuration) • Particle size range: 2 – 20 mm • Separation method: Compressed-air blast via precision valve array • Enclosure rating: IP 54 • Power requirement: ≈ 3.4 kVA | 230 V, 50 Hz • Operating temperature: +5 °C to +40 °C • Purity achievable: up to 99.999 % (depending on configuration) • Control system: Touch-screen interface with VISUTEC software (optional remote monitoring via VISUDESK) • Modular design: Expandable to include NIR sensor (“N”) or additional sorting modules

Condition: used, Used Heat and Control NC-3006 Oil Roaster continuous nut fryer with capacity 600 kg/hour, made in 2011, installed 2013 and last used in 2014. Major equipment includes fryer (max temperature 200 degrees Celsius with positioning conveyor, main conveyor, sediment conveyor), oil storage tank, plate heat exchanger, oil filter, mixing tank, control system. 'The Oil Roaster continuous nut fryer is specially designed for low oil volume, precise temperature control and clean operation for every type of nut process: Peanuts, Almonds, Sunflower meats, cashews, honey-roasted, and more.' Dkjdpfxew T Rino Ah Ssg

Condition: good (used), Machine used for pasteurization vegetables. Djdpforwn Hbox Ah Sskg