Tank installation fuel tank oil tank

Year of construction

1999

Condition

Used

Location

Warstein

Show map

Machine data

Machine type:: Tank installation fuel tank oil tank

Machine number:: 20DKPE

Year of construction:: 1999

Condition:: used

Price & Location

Location:: Enkerbruch 2, 59581 Warstein, Deutschland

Call

Details about the offer

Listing ID:: A242-1926

Update:: 23.05.2024

Description

Tank-& Umweltschutz Wozniack Specialist company according to the Water Resources Act

Dear Sir or Madam, we offer a 20000 liter double-walled storage tank for the storage of diesel as follows . Nominal capacity 20 cbm
piece 1
used but overhauled, i.e. the tank is cleaned, refurbished, primed and painted
Color equipment paint RAL ; . However, you can always bring your own color wishes.
Nedpfx Aocl Sghekyecr
Material steel in steel, material S235JRG2
Documents Manufacturer's certificate/test certificate according to DIN 6616 D/2 and nameplate
Piece. 1 dipstick
Piece. 1 venting nozzle
Piece. 1 filling nozzle
piece. 1 new limit switch
piece. 1 new leakage detector with filled up leakage liquid
piece. 1 conductor
piece. 1 suction line
Form . cylindrical storage tank with feet/console

tank mass length ca 6.800 mm plus diesel pump 500 mm

diameter approx. 2.000 mm

weight approx. 4.400 kg

Storage above ground

Compact diesel dispenser Penta with a digital display . Dispenser new .

Hose length 3 mtr . On request also longer .

Approved automatic nozzle .

Pump 230 Volt max 60 Ltr/min.

=====

Top on offer . Liquid fertilizer - AHL tank units in the size of 10,000-100,000 liters.

Of course you can also design your tank system!

All our equipment is extensively controlled and checked in our company by selected employees.

We also offer an inexpensive delivery on request.

The inspection of our plants is possible at any time.
Further tank plants for above ground as well as underground storage are available in all sizes and are for sale on our premises.

Could we convince you of our offer?

If you have any questions or requests, just give us a call, one of our experienced employees will be happy to advise you.

Price/ Shipping

The price for the gas station is valid ex location Warstein , free loaded.
Delivery can be offered at a reasonable price for an additional charge.
Delivery time = immediately

You will receive an invoice with VAT.

In addition, we buy existing tank systems and can, as an approved specialist company according to the Water Resources Act (WHG)
we can professionally empty, clean, dismantle and transport them away.

With kind regards
from Warstein
Tank Environmental Protection Wozniack

The listing was translated automatically. Translation errors are possible.

Seller

Last online: A week ago

Registered since: 2015

36 listings online

Call

Send inquiry

Telephone & Fax

+49 2902 ... show

Fax:

These listings may also fit your interest.

Auction

CNC turn-mill center DMG Mori NLX 2500 Y | 700

Berlin

7,945 km

CNC turn-mill center
DMG MoriNLX 2500 Y | 700

€45,000

To the auction

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 7024NL256160890J, spindle speed (max.): 10,000 rpm, travel distance Y-axis: 200 mm, rotational speed (max.): 4,000 rpm, bar diameter (max.): 80 mm, distance between centers: 700 mm, Condition: Ball screw drives in X, Y, and Z axes replaced; major maintenance package carried out approx. one year ago (machine has not been in operation since)! TECHNICAL DETAILS Distance between centers: 700 mm Spindle speed range: 1 - 4,000 rpm Tool spindle speed: 10,000 rpm Bar capacity: 80 mm Mounting: MT5, revolving tailstock Without center Turret: 12 stations, bolt-on turret Overhang for driven tools: ±100 mm Assemblies: Integrated MK4 bearing for live center Chip and coolant system: Nodsy A Icrspfx Akyocr Scraper-type chip conveyor with magnetic separator, discharge height approx. 1,000 mm Coolant system: high pressure 5 bar, pump 800 W, delivery rate 20 l/min Coolant shower at chuck, including high-performance pump Compressed air blow-off system for tool holder sleeves Compressed air blow-off system for tailstock live center Line filter for coolant system MACHINE DETAILS Control: M730UM, CELOS - ERGOline Touch Total power: 18.5 / 18.5 / 15 kW (25% duty cycle / 50% duty cycle / continuous) Tool spindle power: 5.5 / 5.3 / 7 kW (3 min / 5 min / continuous) EQUIPMENT Interface for oil mist separator (diameter: 150 mm) Signal beacon: red, yellow, green, blue EtherNet/IP interface for automation Robot interface for portal robot DMG Mori Seiki Transformer: 45 kVA, three-phase autotransformer X-axis direction ISO Note: The machine is supplied without a chuck, tool pre-setter, or workholding devices.

See details

Auction

Vertical machining center Mazak Nexus VCN510C

Olomoucký kraj

8,358 km

Vertical machining center
MazakNexus VCN510C

€12,000

To the auction

Condition: ready for operation (used), Year of construction: 2005, operating hours: 1,476 h, functionality: fully functional, machine/vehicle number: 174275, travel distance X-axis: 1,050 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller model: Mazatrol 640M, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel X-axis: 1,050 mm Travel Y-axis: 510 mm Travel Z-axis: 510 mm Spindle speed: 12,000 rpm Number of tool changer positions: 30 Table size: 1,700 x 750 mm MACHINE DETAILS Ncsdpsy Am Ndofx Akyer Spindle motor power: 18.5 kW Control: Mazatrol 640M Weight: 7,100 kg Operating hours Counter 1: 43,723 h Counter 2: 1,476 h EQUIPMENT Chip conveyor

See details

Auction

Hydraulic lift table punch press Schoen + Sandt 521

Plzeňský kraj

8,104 km

Hydraulic lift table punch press
Schoen + Sandt521

€45,000

To the auction

Year of construction: 2001, condition: ready for operation (used), functionality: fully functional, punching force: 1,000 t, operating speed: 93 mm/s, stroke length: 55 mm, table length: 1,100 mm, table width: 800 mm, machine/vehicle number: 100597, TECHNICAL DETAILS Press force: 10,000 kN Table surface (W x D): 1,100 x 800 mm Stroke range: 15 - 55 mm Clearance at max. stroke: 28 - 98 mm Puzzle thickness: up to 3 mm Format width (max.): 1,100 mm Punching speeds Nedpfx Akoy Ampdjyocr Upwards: 47.8 mm/s Downwards: 93.7 mm/s Punching: 0.28 mm/s Hydraulic unit Type: 250 Dimensions (L x W): 1,310 x 910 mm Oil capacity: 670 l Unit weight: 1,000 kg Oil weight: approx. 550 kg Weight with oil fill: approx. 1,550 kg Automatic punching table Type: 355 Table top size (W x D x thickness): 1,000 x 700 x 10 mm Hardness: 62 HRC Surface finish: 7 MACHINE DETAILS Electrics Operating voltage: 400 V Frequency: 50 Hz Rated machine current: 50 A Incoming line protection: 63 A Control voltage: 230/24 V Rated power: approx. 30 kW Protection class: IP 54 Power requirement: approx. 8 kW Pneumatics Operating pressure: 6 bar Dimensions & Weight Puzzle disassembler dimensions (L x W x H): 3,150 x 1,620 x 2,900 mm Working height: approx. 1,700 mm Total weight: 33,000 kg Weight of puzzle disassembler: approx. 1.8 t Noise level: < 70 dB(A)

See details

Auction

Edgebander Homag OPTIMAT KAL 310/5/A3/S2

Gelderland

7,560 km

Edgebander
HomagOPTIMAT KAL 310/5/A3/S2

€4,500

To the auction

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, input voltage: 400 V, total height: 2,200 mm, total length: 7,500 mm, total width: 1,500 mm, overall weight: 4,000 kg, TECHNICAL DETAILS Overall height: 2,200 mm Overall length: 7,500 mm Overall width: 1,500 mm MACHINE DETAILS Weight: 4,000 kg Year of manufacture: 2007 Voltage: 400 V Power consumption: 46 A Fuse: 63 A Ncodpfx Aey Akytekyjr Transport dimensions: 7,500 mm x 1,500 mm x 2,200 mm (L x W x H) Transport weight: 4,000 kg EQUIPMENT Tools included: Yes (for 1st, 3rd, 4th, 5th, 7th, and 8th unit) Tools included: No (for 6th unit)

See details

Auction

Gelderland

7,560 km

Optimizing cross-cut saw
StromabTR 500

€3,500

To the auction

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 241306, saw blade diameter: 500 mm, cutting height (max.): 170 mm, cutting width (max.): 395 mm, power: 7.5 kW (10.20 HP), borehole diameter: 30 mm, TECHNICAL DETAILS Max. cutting width: 395 mm Max. cutting height: 170 mm Saw blade diameter min.: 490 mm Nodpfxjy Akvne Akyscr Saw blade diameter max.: 500 mm Saw blade bore diameter: 30 mm Feed table length: 5,640 mm Output table length: 1,180 mm Feed speed: Automatic MACHINE DETAILS Voltage: 400 V Power consumption: 16.5 A Fuse: 32 A Power: 7.5 kW Transport weight: 800 kg Transport packages: 3 EQUIPMENT Automatic feed system

See details

Auction

Gelderland

7,561 km

Run press
OrmaHL/A Digit 25/13

€7,000

To the auction

Condition: ready for operation (used), Year of construction: 2018, machine/vehicle number: P0220118, functionality: fully functional, pressing force: 9 t, number of cylinders: 6, workpiece length (max.): 2,500 mm, workpiece width (max.): 1,300 mm, workpiece height (max.): 200 mm, Equipment: CE marking, TECHNICAL DETAILS Max. workpiece length: 2,500 mm Max. workpiece width: 1,300 mm Max. workpiece height: 200 mm Number of cylinders: 6 Total working pressure: 90,000 N Working pressure: 294,200 N/m² MACHINE DETAILS Nsdpfx Aoy Akukokyocr Dimensions & weight Dimensions (L x W x H): 3,000 x 2,070 x 1,670 mm Unladen weight: 4,000 kg EQUIPMENT CE marking

See details

Auction

Gelderland

7,560 km

Run press
ColomboThroughput Press

€7,500

To the auction

Auction

Gelderland

7,560 km

Edgebander
Holz-herArcus 1336

€6,000

To the auction

Condition: ready for operation (used), Year of construction: 2011, machine/vehicle number: 5/1-107, functionality: fully functional, total height: 1,730 mm, total length: 6,100 mm, total width: 1,440 mm, Equipment: CE marking, The machine has the following configuration: 1. Pre-milling unit (tools included) 2. Glue application unit 3. Pressure rollers (tools included) 4. End trimming unit (tools included) 5. Not specified (tools included) 6. Corner rounding unit (tools included) 7. Radius scraping unit (tools included) 8. Not specified (tools included) 9. Flat scraping unit (tools included) MACHINE DETAILS Number of units: 9 Njdpjy Akgtjfx Akyecr Voltage: 400 V Power consumption: 21.9 A Main fuse: 50 A Dimensions Dimensions (L x W x H): 6,100 x 1,440 x 1,730 mm Transport packages: 1 EQUIPMENT CE marking

See details

Auction

Gelderland

7,560 km

Machining center
SCMMorbidelli M600

€29,000

To the auction

Condition: ready for operation (used), Year of construction: 2012, machine/vehicle number: AA2-002032, functionality: fully functional, operating hours: 9,974 h, overall weight: 7,450 kg, feed length X-axis: 5,020 mm, feed length Y-axis: 1,680 mm, feed length Z-axis: 250 mm, TECHNICAL DETAILS X-axis travel: 5,020 mm Y-axis travel: 1,680 mm Z-axis travel: 250 mm Number of axes: 5 Software: SCM XILOG MAESTRO Control systems: SCM PRISMA K, SCM TTS System, SCM TecPad, MORBIDELLI TV Matic, SCM PRO-SPACE, SCM RAPID 12, SCM RAPID 24 Njdoy Akgaspfx Akyecr Tool changer: 36 positions Drilling units: 24 x vertical MACHINE DETAILS Machine dimensions (LxWxH): 2,400 x 8,000 x 2,400 mm Total weight: 7,450 kg EQUIPMENT - Vacuum pump with 250 m³/h capacity - Liquid-cooled milling spindle

See details

Auction

Gelderland

7,560 km

Gang drilling machine
SCMCyflex H800

€7,000

To the auction

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: AB/222595, total width: 1,950 mm, total length: 2,300 mm, total height: 1,850 mm, empty load weight: 1,240 kg, Equipment: CE marking, MACHINE DETAILS Njdjy Akdxspfx Akyecr Dimensions & Weight Dimensions (L x W x H): 2,300 x 1,950 x 1,850 mm Unladen weight: 1,240 kg Voltage: 400 V Power consumption: 10 A EQUIPMENT CE marking

See details