Hydraulic 2-shell sorting grab

S

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 011.257.90.043, center height: 175 mm, center width: 1,000 mm, controller manufacturer: Fanuc, TECHNICAL DETAILS Maximum center height: 175 mm Distance between centers: 1,000 mm Longitudinal slide Maximum longitudinal slide travel: 1,050 mm Cutting speed (vt): 0.0001–10,000 mm/min Resolution: 0.0001 mm Table tilt: max. 8.5° Cross slide Maximum cross slide travel: 275 mm Cutting speed (vt): 0.0001–10,000 mm/min Resolution: 0.0001 mm MACHINE DETAILS Lajdpozb Hxnofx Ammec Control system manufacturer: Fanuc

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 13230, wheel width: 25 mm, wheel diameter: 130 mm, controller model: Siemens 840D, spindle diameter: 85 mm, stroke rate (max.): 2,500 1/min, TECHNICAL DETAILS Wheel diameter max.: 130 mm Wheel width: 25 mm Module max.: 3 Module min.: 0.5 Spindle bore diameter: 85 mm Stroke rate: 500 - 2,500 strokes/min (continuously variable) Stroke: 30 mm MACHINE DETAILS Control model: Siemens 840D Total power requirement: 48 kVA Laedjzb Dtcopfx Ammoc Dimensions & Weight Footprint (L x W x H): 4,700 x 3,000 x 3,300 m Machine weight approx.: 11.5 t EQUIPMENT Tailstock with point Chip conveyor Hydraulically actuated tailstock arm and linear guides

Condition: reconditioned (used), Year of construction: 1997, operating hours: 5,929 h, functionality: fully functional, center height: 100 mm, grinding length: 400 mm, center width: 400 mm, grinding wheel diameter: 350 mm, grinding wheel width: 30 mm, The machine was overhauled in 2026! TECHNICAL DETAILS Grinding length: 400 mm Center height: 100 mm Distance between centers: 400 mm Ljdpfoza Ea Iex Ammjac Max. workpiece weight in the tailstock between centers: 20 kg Grinding wheel diameter max.: 350 mm Grinding wheel width: 30 mm Grinding wheel bore: 127 mm Working feed rate Z-axis: 100 - 3,500 mm/min Table swivel: 0 - 30° Power of grinding spindle motor: 3 kW Speed of workpiece spindle: 30 - 1,200 rpm Power of workpiece spindle: 0.5 kW Tailstock arbor: MT2 Quill stroke: 20 mm MACHINE DETAILS Dimensions & Weight Machine dimensions: 2,350 x 1,480 mm Weight: 1,600 kg

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 18,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 700 mm Travel range, Y-axis: 1,000 mm Travel range, Z-axis: 500 mm Spindle speed: 1 - 18,000 rpm Tool holder: HSK-A63 Tool magazine capacity: 70 Tool-to-tool change time: 2.5 s Acceleration: 20 m/s² Travel speed: 120 m/min MACHINE DETAILS Number of pallets: 6 EQUIPMENT Integrated workpiece changer system High-dynamic 5-axis machining Weight-optimized kinematics Lasdpezd R R Esfx Ammoc Linear motor drives

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: P1065-22-A-01, controller model: Siemens SPS S7, wall material: stainless steel, cooling capacity: 180 kW (244.73 HP), nominal flow rate: 16,500 m³/h, product height (max.): 150 mm, Due to a rescheduling of a site visit, the auction end date has been postponed to Thursday, June 25, 2026! The new price of the machine was €650,000! TECHNICAL DETAILS Capacity (for rolls weighing approximately 60g): 10,000 - 15,000 pieces/hour Layout: 180° layout Levels: 17.5 Free product height: approx. 150 mm Level spacing: approx. 216 mm Total cooling capacity: approx. 180 kW Total power consumption: approx. 70 kW Power connection: 400 / 230 V, 3-phase, 50 Hz Refrigerant: R717 Refrigerant supply: NH3 pump system Ambient temperature: above 10 °C Belt system Belt guidance: from bottom to top Infeed height: approx. 8,500 mm / 500 mm outside the cell wall Outfeed height: approx. 4,728 mm / 400 mm outside the cell wall Belt type: Stainless steel wire belt with side edges on both sides Belt mesh: 12.7 x 27.43 mm Wire thickness: 1.4 mm Belt width: approx. 762 mm Usable belt width: approx. 700 mm Usable belt length: approx. 300 m Belt length including infeed and outfeed: approx. 320 m Ljdpfxozardte Ammeac Housing Housing length: approx. 8,700 mm Housing width: approx. 6,920 mm Housing height: approx. 5,200 mm Insulation thickness: approx. 140 mm Plastic elements: approx. 2,600 mm Width of operator walkway: approx. 1,500 mm Evaporators Number of evaporators: 4 units Evaporator capacity: approx. 60 kW each Air flow: vertically drawing, 45° upwards Air temperature: approx. -32 °C Evaporation temperature: approx. -40 °C Defrosting: manually with air or hot gas Evaporator surface area: 311 m² each Air volume: 16,500 m³/h each Fans: 4 units per evaporator Fan power: approx. 7.5 kW Air ring heater: 4 x 0.72 kW Defrosting interval: sequential Heater in the pan: hot gas Control and switch cabinet Control system: Siemens PLC S7 CPU: 1512SP-PN Touchscreen: 12" Operating panel: TP-1200 Comfort Panel Interface to the refrigeration unit: 0 - 10 V Main drive: 1 x approx. 2.2 kW Overdrive: approx. 1.1 kW Switch cabinet: stainless steel on a stainless steel frame Temperature display: min. 1x per day Operating hour counter: available Belt cleaning: freely programmable Alarm light: optical, green / yellow / red Construction Material: Stainless steel 1.4301 Conveyor belt: Stainless steel, 762 mm Side guide for conveyor belt: approx. 25 mm Number of outlets: 2 units Product guides: 2 units EQUIPMENT Stainless steel construction Insulated housing with 140 mm insulation thickness Stainless steel belt with side edges on both sides Belt path from bottom to top Internal arrangement of the single-tower spiral Infeed at the bottom Outfeed at the top Hygienic design Food-grade plastics Easy-to-maintain accessibility SEW main drive with Danfoss frequency converter SEW overdrive with Danfoss frequency converter Motors in energy efficiency class IE3 Siemens PLC S7 with CPU 1512SP-PN TP-1200 Comfort Panel Touchscreen display Variable belt speed Operating hour counter Fault reporting system with traffic light and signal horn Emergency stop switch and safety sensors Height and belt control on each level Stainless steel cabinet on stainless steel frame Freezer LED lighting controlled via the touch panel Welded stainless steel base pan with slope and drainage Under-freezing protection heater with a reserve circuit Floor temperature sensor with reserve sensor 4 separate evaporator units, each with one fan Evaporator pipes made of stainless steel Evaporator housing made of stainless steel Evaporator pans made of stainless steel Hot gas defrosting made of stainless steel in the unit Sequent

Condition: ready for operation (used), Year of construction: 2014, operating hours: 65,000 h, functionality: fully functional, punching force: 22 t, sheet thickness (max.): 8 mm, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,550 mm, workpiece weight (max.): 200 kg, Machine with SheetMaster TECHNICAL DETAILS Travel range of the X-axis during punching: 3,050 mm Travel range of the Y-axis during punching: 1,550 mm Laedpfx Amjy U Ut Iomoc Sheet thickness: max. 8 mm Workpiece weight: max. 200 kg Punching force: max. 220 kN Stroke rates Punching stroke rate at 1 mm: 1,350 min⁻¹ Marking stroke rate: 3,000 min⁻¹ Part removal Part size, part flap during punching: max. 500 x 500 mm Part size, fixed chute during punching with a moving table: max. 80 x 50 mm MACHINE DETAILS Operating hours: 65,000 h Space requirement: 7,395 x 6,540 x 2,072 mm Power consumption, auto-shutdown active: 0.5 kW Power consumption during production: 9.5 kW

Condition: good (used), machine/vehicle number: 2251, Year of construction: 2021, total width: 3,000 mm, operation weight: 24,200 kg, Equipment: lighting, Cometto MSPE-S from Uniktruck Wheel type – Steering wheel: Pneumatic Wheel size – Steering wheel: 48 stk 215/75 R Lajdpjyuhlvefx Ammjc

Condition: used, Year of construction: 2004, saw blade diameter 225 x 32 mm cutting diameter max. 70 mm bei 90° mm miter cut 0°-45°-60° miter cut 1° Skala Lodezginnspfx Ammeac spindle turning speed range 42 / 84 U/min Max. round cutting cross-section at 90°: 70 mm Max. rectangular cutting cross-section at 90°: 80 x 50 mm Max. round cutting cross-section at 45°: 64 mm Max. rectangular cutting cross-section at 45°: 60 x 50 mm Saw blade diameter: 225 mm Bore diameter: 32 mm Includes lubrication system Includes base frame

Condition: used, amount 1 Palette Wooden box containing a variety of metal parts for a Pfauter P 250 S. Included are: -> Various gear sets -> Shafts + bolts -> Bushings + spacer rings -> Shims + clamping pieces -> Clamping shafts -> Screws -> Pinions -> Spacer/clamping band -> Centering pins -> Broaching needles + cutting knives + forming tools Ljdpfjzgid Aex Ammjac Complete package price

Condition: used, DAEWOO DOOSAN D40S TRIPLEX - DIESEL All-Terrain Forklift ∗Very good overall condition, always stored indoors∗ ∗Fitted with all fork positioners∗ Lajdjyutk Repfx Ammoc ∗All-terrain capable∗ ∗Minimal electronics∗ ● Enclosed cab (doors and rear made from transparent tarpaulin) ● Engine power: 58 kW / 79 HP ● Fuel: Diesel ● 2-speed automatic / torque converter transmission ● Unladen weight: 4,200 kg ● Rated capacity: 4,500 kg (at 500mm load center) ● Lifting height: 5,600 mm ● TRIPLEX mast with sideshift and fork positioner ● Fork length: 1,200 mm ● Dual front work lights ● Rear lighting ● Pre-installed for rotating beacon ● Pre-installed for towing hitch ● Front tires: 8.25 - R15 / tire tread in good condition! ● Rear tires: 250/75 R12 solid rubber tires / tread in very good condition! - UVV inspection and maintenance: NEW! Errors and prior sale excepted! = More Information = Contact Joannis Arpantzanis or Kai Bühler for further information.