2-component mixing and dosing system

Mahr Unipre MMAX112A

Condition: like new (used), Year of construction: 2022, functionality: fully functional, overall weight: 4,000 kg, power: 17 kW (23.11 HP), total width: 1,510 mm, total length: 6,500 mm, total height: 1,820 mm, Automatic paper roll paper lid machine with inline packing machine for 8oz and 12oz cups Speed - 70~100 pc/minute Raw material - One-side or two side (polyethylene)film coated/laminated paper (Like the PE coated paper; PLA paper; card boad paper with film) Kdodpfexur Hiex Ag Aou Paper Lid Size - for 8oz and 12oz Working Power - 12kw Total Power - 17KW, Power Source - 3-phase, 380V, 50/60Hz, User Need To Buy Air Compressor

Year of construction: 2008, condition: ready for operation (used), functionality: fully functional, paper width (max.): 1,800 mm, Unwind diameter: 1,000 mm Rewind diameter: 800 mm Max. speed: 400 m/min Friction shafts for 3 and 6 inch Hydraulic lift at the unwind station Splicing table Web edge control Tidland knife holders, 20 pieces Semi-automatic knife setting system from Tidland Kdedpfxjywl D Nj Ag Aju Recipe management Laser positioning We will also dismantle and load the machine onto a truck or sea container at our own expense.

Condition: ready for operation (used), Year of construction: 1996, A laminating machine Windmöller und Hölscher, without adhesive and coating unit, is available. Web width: 1420mm, coating width: 1400mm, max. roll diameter: 1000mm, max. roll weight: 1300kg, core inner and outer diameter: 76mm/95mm, max. mechanical speed: 460m/min, min. material thickness: 15mm, max. material thickness: 250µm, total machine dimensions X/Y: 19500mm/2500mm. The machine was used as a rewinder. Documentation available. On-site inspection is possible. Kodpfxox I Rprj Ag Ajdu

Year of construction: 2024, operating hours: 100 h, condition: refurbished (used), functionality: fully functional, overall weight: 500 kg, input voltage: 230 V, operating pressure: 6 bar, type of input current: AC, machine/vehicle number: 2K.MA.WPE.241, Used Mur.Tech KMD-3000 V1 2-component mixing and dispensing system (year of manufacture 2024), directly from the manufacturer. Designed for highly viscous, abrasive, and reactive media such as epoxy resins, polyurethanes, silicones, adhesives, and highly filled encapsulating compounds. Pulsation-free material transfer thanks to an eccentric screw pump. Before delivery, we, as the original manufacturer, carry out a complete factory reconditioning of all components in contact with the material: the pump, material containers, mixing head, hoses, and valves are either rebuilt or replaced with new ones. This means that the wear condition of the media-carrying parts corresponds to that of a new system. Frame and sheet metal parts show signs of use. Highlights: - Factory reconditioning of all components in contact with the material before delivery - Modular design: the entire conveying path from the pump head to the mixing gun can be replaced without tools (clamp technology) - Material change in just a few minutes – virtually no material loss - Stator change with only 3 screws – service without production downtime - Mixing tube change without tools in seconds - Lightweight and ergonomic mixing head made of carbon / aluminum / GRP - Swivel arm for fatigue-free operation - Mobile thanks to roller chassis Technical data: Manufacturer: Mur.Tech GmbH, Made in Austria Model: KMD-3000 V1, year of manufacture 2024 Pump: Eccentric screw, pulsation-free Mixing ratio: 100:10 – 100:100, infinitely variable Stator materials selectable: NBR, FKM, EPDM, silicone, etc. Material containers: 2x 30l, with pneumatic propeller stirrer Mixer: Static or dynamic possible Operation: Gun or touch HMI Control: B&R PLC with B&R touch panel Sensors: - Pressure monitoring in the container - Temperature measurement along the entire material path - Blockage monitoring - Flow measurement and bubble detection Discharge types: continuous, pulsed, by weight Connection: 230V 50Hz, compressed air min. 6 bar Dimensions (W × D × H): 2,000 × 1,000 × 1,550 mm Kdodpozabnzefx Ag Aeu Note on the images: The images show the system in its current condition before factory reconditioning. The components in contact with the material will be renewed before delivery. Application areas: Adhesive dispensing, electrical potting, specialty chemicals, series production, medical applications. Scope of supply: System, operating manual, wiring diagrams. Commissioning and training optional. From the manufacturer: Spare parts supply and service by the original team. Sold as seen, excluding any warranty. Price: on request Location: 8811 Scheifling On-site inspection possible by appointment.

Condition: good (used), Year of construction: 2005, operating hours: 7,500 h, functionality: fully functional, machine/vehicle number: 3149, Fischer&Krecke Flexpress 16S with 1250 mm printing width. The machine is still in operation and can be viewed at any time. Fully functional and in well-maintained condition. Kodpexqmn Tofx Ag Asdu