Used plastic processing machinery for sale (2,706)

Year of construction: 1990, condition: ready for operation (used), functionality: fully functional, controller manufacturer: Siemens, The system comes from current production. TECHNICAL DETAILS Nedoztw Agjpfx Adtelf Screw diameter: 2 × 75.0 mm L/D ratio: 38 D Design: Co-rotating MACHINE DETAILS Control system manufacturer: Siemens Drive power: 180 kW EQUIPMENT 2 dosing units Water bath Granulator Vacuum degassing Segmented screws and cylinder

Condition: ready for operation (used), Year of construction: 1995, operating hours: 39,000 h, functionality: fully functional, Equipment: documentation/manual, A used and functional profile line for rigid PVC-profiles (300 x 100 mm), consisting of: Twin-screw extruder (parallel) Manufacturer: WEBER Type: DS 7.22 Year of manufacture: 1995 Machine no.: DS70-043 Operating hours: 39,000 hours Screw diameter: 70 mm Effective screw length: 22 x D Screw geometry: for rigid PVC profiles Torque: 4,500 Nm per screw Screw speed: max. 40 rpm, continuously adjustable Drive motor: DC low-voltage motor, thyristor-controlled Drive power: approx. 25 kW Cylinder heating/cooling zones: 5/3 (air cooling with fan) Adapter heating zone: 1 Tool heating zones: 5 Control: conventional control with digital temperature controllers Degassing: Busch rotary vane vacuum pump (1.5 kW) Output capacity, max.: 120-150 kg/h for hard PVC, depending on material Connected load: approx. 50 kW (without tool) Special accessories: Mass temperature sensor and mass pressure sensor Adapter between extruder connection and extrusion tool Used tool set for a window profile (widening), consisting of: - Extrusion tool ‘widening’, incl. heating bands - Dry calibration - Vacuum tank approx. 2 m long, with 8 slots for calibration discs - 16 calibration discs Vacuum calibration unit Manufacturer: Uniplast / Greiner Type: CAL VAK 4P Year of manufacture: 1992 Machine number: K9209590 Nledpfeyhcabex Adtjf Total length: 6500 mm Vacuum pumps: 4 x Speck vacuum pumps (4.3 kW each) Water circulation pumps: 2 x Calpeda (1.1 kW each) Caterpillar haul-off, incl. attached saw Manufacturer: Uniplast / Greiner Type: CAT PUL 2D Year of manufacture: 1992 Machine number: R 9204546 Haul-off: Effective contact length: 2000 mm Pad width: 250 mm Haul-off force, max.: approx. 25000 N Speed range: approx. max. 10 m/min. Profile saw: HM circular saw blade: Ø 450 mm Profile cross-section, max.: approx. 300 x 100 mm Tilting table Manufacturer: Ide Type: ME N 52/2 Year of manufacture: 1994 Length: 6000 mm Support width: 270 mm Note: The complet profile line was overhauled in 2020 and has only been in operation for 325 hours since then.

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, Haul-Off, used Manufacturer: Blake Kunststoffproduktionsanlagen Type: 303-1600-270 Year of manufacture: 1997 Pulling force: approx. 40,000 N Tread width: 300 mm Passage width: max. 500 mm Effective contact length: 2400 mm Haul-off speed: max. approx. 8.0 m/min. Extrusion height: 1000 – 1200 mm Caterpillar clamping: pneumatic, at the front and back Dimensions: 4000 x 1200 x 2300 mm (LxWxH) Weight: approx. 3000 kg Nlodpfoyx Dz Nox Adtsf Condition: recondition and checked for function

Year of construction: 1994, operating hours: 32,303 h, condition: reconditioned (used), functionality: fully functional, Twin-screw extruder, second-hand Manufacturer: Reifenhäuser Type: BT 1000-2-63 K Year of construction: 1994 Machine no.: 32061 Operating hours: 32,303 hours Screw geometry: conical for PVC-hard profiles Screw diameter: 63 - 121 mm Screw length: 1300 mm Screw speed: max. approx. 32 1/min. Nominal torque from gearbox: 1000 daNm Dynamic load rating of the back pressure bearing: 103600 daN Motor power: 43.0 kW, Drive motor: Baumüller DC motor Barrel heating/cooling zones: 4/3 (air cooling with fan) Adapter heating zones: 1 Tool heating zones: 5 Temperature control: digital temperature controller (2 x PSG Multipact 88) Max. permissible melt pressure: 500 bar Output: approx. 150 - 200 kg/h for rigid PVC profiles Accessories: Dosing device and material hopper Extrusion height: 1150 mm Dimensions: 4250 x 1200 x 1750 mm without hopper (LxWxH) Weight: approx. 3000 kg Condition: The machine came directly from production and was cleaned by us, repainted (RAL 7035, light gray) and checked for function. Nlodpfx Adsyhcghjtjf Barrel and screws are in a good condition.

Year of construction: 1979, operating hours: 216 h, condition: reconditioned (used), functionality: fully functional, Twin-screw extruder, parallel Manufacturer: Hans Weber Maschinenfabrik GmbH Type: DS 85 Year of manufacture: 1979/2022 Machine no.: 85-399 Screw geometry: for PVC-hard profiles Screw diameter: 2 x 85 mm Screw length: 17 x D Screw speed: max. 30 rpm Screw torque: 10000 Nm Motor power: 3.3 - 25.0 kW Drive motor: commutator motor Elektra Faurndau Cylinder heating/cooling zones: 4/2 (air cooling with fan) Nledeyhcc Ajpfx Adtef Tool heating zones: 8 Temperature control: 12 x digital temperature controllers (PMA KS40) Accessories: Melt pressure sensor and melt temperature sensor Connected load: approx. 60 kW (without tool) Extrusion height: 1100 mm Output capacity: approx. 150 - 180 kg/h for PVC-hard profiles Accessories: Material hopper and connection flange Accessories: Vacuum pump (1.1 kW) incl. material separator Dimensions: 4500 x 1200 x 2100 mm (LxWxH), incl. material hopper Weight: approx. 4000 kg Note: The electrical control cabinet was completely renewed approx. 3 years ago. Since then, the extruder has only been in operation for 216 hours. Condition: The extruder was repainted (light gray, RAL 7035) and checked for function.

Condition: used, Year of construction: 2013, functionality: fully functional, URBAN post milling cutter. Nlsdpfozpyhkex Adtjf

Condition: used, Year of construction: 2008, functionality: fully functional, Single-head welding machine Nsdpfx Adszpyfcotelf

Condition: used, Year of construction: 2007, functionality: fully functional, SE-HSM-40/26-COMPACT-PLUS Horizontal four-head welding machine 2MC Horizontal CNC corner edging machine, motion control WST-30 Horizontal turning station Nodozm N Nrjpfx Adtslf Minimum element size 320 × 320 mm Maximum element size 4,000 × 2,600 mm Maximum element weight 80 kg Minimum working area 320 × 320 mm Maximum working area 4,000 × 2,600 mm

Condition: used, Year of construction: 2010, functionality: fully functional, Technical specifications: System output: up to approx. 2,000 cuts per 8 hours, depending on the cross-sections of the reinforcing bars used Feed magazine: 12 positions, automatically timed Discharge magazine: 12 positions, automatically timed Bar length, maximum: 6,000 mm Bar length, minimum: 400 mm Cutting length, maximum: 4,000 mm Cutting length, minimum: 170 mm Remaining piece processing: 350 mm Profile dimensions: 86 × 70 mm Wall thickness, maximum: 3 mm Nljdpfxezm I Dhe Adtjf Functionality and features: • Saw unit with spray medium system • Automatic operation • Lateral discharge in the Z-direction • Screen-based dialog system with loading table display • Direction of travel, depending on the model, from left to right or from right to left Control and hardware configuration: • High-quality PC with a 19-inch TFT color monitor • USB ports • DVD drive • Keyboard • Windows operating system • Remote maintenance via the internet

Condition: new, Year of construction: 2023, This high-precision all-electric injection moulding machine was manufactured in 2023 and is part of the renowned PX Series by KraussMaffei. The machine offers outstanding energy efficiency, repeatability and production accuracy, making it ideal for technical mouldings, medical components, packaging, electronics and other high-quality plastic products. The PX series combines compact design with high performance, ensuring maximum flexibility and productivity while maintaining low operating costs. Technical Data - Manufacturer: KraussMaffei - Model: KM 50-180 PX - International designation: 180 PX / 50 - Machine type: All-electric injection moulding machine - Year of manufacture: 2023 - Machine weight: 4,750 kg - Condition: Excellent (NEW) Please Note: Nodjzwficopfx Adtolf The information was obtained to the best of our abilities and - where possible - from the manufacturers. It is given in good faith, however, its accuracy cannot be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. Specific tooling must be requested before purchasing because in most cases the offered machines are still in production when the pictures were taken. We advise you to check any vital details! * Manufacturer: KraussMaffei * Model: KM 50-180 PX * International designation: 180 PX / 50 * Machine type: All-electric injection moulding machine * Year of manufacture: 2023 * Machine weight: 4,750 kg Control Unit: MC6 Injection unit: 180 Screw diameter: 30mm

Condition: used, Year of construction: 2010, 4-head welding machine Nledpfx Aozv S Euodtof Automatic corner cleaning machine

Condition: used, Year of construction: 2005, Machining center - screwing Njdpjzv S Dkjfx Adtolf - milling with 8 automatic tools loading- and unloading table

Condition: ready for operation (used), Year of construction: 2001, operating hours: 4,517 h, clamping force: 16,000 kN, injection weight: 7,450 g, This 3-axis Krauss Maffei 1600-17200MC hydraulic injection moulding machine was manufactured in 2001. It features a clamping force of 16,000 kN and a screw diameter of 125 mm. The machine has a maximum shot weight of 7450 g and a platen size of 2600 x 2110 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 1600-17200MC machine we have for sale. Contact us for further details. • Injection unit: 17200 • Distance between tie bars (h × v): 1600 × 1250 mm • Platen size (h × v): 2600 × 2110 mm • Clear distance (x × y): 1800 × 1400 mm • Max. mold opening stroke: 2,500 mm • Mold installation height (min–max): 900–1,600 mm • Opening width: 3,400 mm • Mold opening force: 1,108 kN • Moving platen force: Opening 177 kN / Closing 153 kN • Ejector stroke: 300 mm • Ejector force (forward/backward): 415 / 177 kN • Operating voltage: 400 V / 50 Hz • Motor current: 446 A • Heating current: 164 A • Total pump operating hours: 73,761 h Additional equipment • Wittmann Robot System W650 (2001) • Hub Stroke X 1500; Y 2600; Z 3500 • Spare cylinder/screw set (1x) • Internal cooling system Nedpfxsyyyr To Adtjlf • Core pullers (2x)

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 3,000 kg, rotor diameter: 400 mm, number of blades: 10, total length: 1,120 mm, total height: 1,950 mm, control cabinet length: 500 mm, control cabinet width: 300 mm, control cabinet height: 1,500 mm, total width: 1,210 mm, rotor width: 600 mm, power: 22 kW (29.91 HP), type of input current: three-phase, sieve perforation: 6 mm, warranty duration: 12 months, input voltage: 400 V, inner dimension width: 590 mm, opening width: 400 mm, Equipment: CE marking, ZERMA GS 400/600 – High-Performance Granulator | Precision. Performance. Reliability. Experience the new ZERMA GS 400/600 high-performance granulator in action. The GS series was developed for the highest demands in plastic recycling and combines maximum performance with exceptional reliability and easy maintenance. Highlights ✔️ Rotor diameter: 400 mm ✔️ Rotor width: 600 mm Nodpfxjzmhgis Adtelf ✔️ Proven ZERMA V-Cut technology ✔️ 5-knife rotor ✔️ 3 stator knives ✔️ Robust steel construction ✔️ Intelligent drop-down cutting system ✔️ External knife adjustment ✔️ Robust bearing outside the cutting chamber ✔️ Optional bypass hopper for long profiles and pipes ✔️ Designed for continuous industrial operation Typical applications * Packaging tapes (at 8 mm, 600 kg/h) * Runners and injection molded parts + start-up lumps up to 1 kg * Plastic profiles * Pipes * Sheets * Films * Blow molded parts * Engineering plastics * Production waste * Post-industrial recycling The GS 400/600 stands for precise shredding, high throughput, and long service life – the ideal solution for modern plastic processors and recycling companies.

Condition: used, Year of construction: 2021, functionality: fully functional, overall weight: 20 kg, total width: 1,160 mm, total length: 1,160 mm, For sale is a high-quality Motan material distribution station (6x6) for the central supply of materials in plastics processing. Nedezcvgwspfx Adtelf The system has a robust design and is intended for continuous industrial use. The use of hardened steel profiles makes the material distribution station particularly wear-resistant and ideally suited for abrasive plastics. Thanks to its compact design on a pallet, it is easy to transport and can be quickly put into operation.

Condition: used, A Wittmann temperature control unit is for sale Medium: water Nledpfx Aoxx R Sxodtef Heating capacity: 7 kW Cooling capacity: 56 kW Operating temperature: max. 90°C

Condition: excellent (used), Year of construction: 2018, 2018 Krauss Maffei PX 120-250 All Electric Injection Mold Machine Nodpezt Nxgefx Adtslf Clamping Force 120 tonnes (Approx. 1200kN). Tie Bar Spacing 470 × 420mm. Mold Platen Dimensions 680 × 610mm (Typical For The PX 120 Series). Opening Stroke 400mm. Maximum Mold Height (Min-Max): 200-550mm. Ejector Stroke 150mm. S/No. 61030113 (2018). With Piovan MDP2 Volumetric Doser, Piovan ETW12-P6 Temperature Controller & Husky H-C6-1-NE02-12 12-Zone Hot Runner Temperature Controller. Overall Dimensions L5.34 x W1.35 x H1.85m. Weight 7,900kg.

Condition: new, functionality: fully functional, Unused single-screw extruder / recycling extruder - Screw diameter: 140mm - Drive: Siemens motor, 95 kW - Volumetric K-Tron metering system - Degassing zone - Optionally with die head - Control system Nlodpfx Ajqy E Evedtjf Optionally with strand granulator, water bath, etc. Inspection possible by arrangement.

Condition: excellent (used), Year of construction: 2021, operating hours: 3,500 h, functionality: fully functional, machine/vehicle number: 2021-1504-QN, High-end metal separator for inspecting bulk materials in free fall Material: stainless steel 304 Surface: sandblasted Sensing tube material: PE, anti-static, food grade Rejector: single flap type RH Protection rating: IP66 Electronics assembly: detached Control electronics cable length: 3 m Nominal width: 150 mm Orientation: vertical, top to bottom Power supply: 100-240VAC 50-60Hz LNPE - Without power cable Pressurized air supply: 6-10 bar Nlsdpfx Adjzvwlmjtof Expected sensitivity: FE: 0.4 mm NE / Al: approx. 0.4 to 0.56 mm Stainless steel: approx. 0.4 to 0.72 mm Electronics outside ATEX Zone Inside: Zone 20 within metal separator (pipe) = II 1 D Ex h IIIC T135°C Da Outside: Zone 22 surrounding metal separator = II 3 D Ex tc IIIC T135°C Dc IP65 QUICKTRON 07 RH metal separators are used for inspecting powders and granules in free-fall lines. They are available in nominal widths up to 300 mm and can therefore cover all application areas, from the laboratory to truck loading. Their hygienic design and easy cleaning prevent cross-contamination between product batches. Depending on the requirements, they can increase process safety or fulfill the task of outgoing goods inspection. Mesutronic metal detectors use state-of-the-art technology to protect your production, your reputation, and your customers from damage caused by metallic foreign objects. Digital signal processing, combined with innovative evaluation methods, comprehensive self-monitoring, and ease of operation, ensure the optimal function of the system and the successful completion of all types of audits. The devices are complemented by an extensive range of accessories and variants, from multi-frequency technologies to test bodies and material certificates. The machine was in operation at an R&D center in Israel. As the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or in the production plant in Europe. The details for optimal transport need to be clarified. The machine price does not include packaging.

Condition: excellent (used), Year of construction: 2010, operating hours: 44,600 h, functionality: fully functional, 1,0 St. gebr. Zweikomponenten Spritzgießmaschine mit Roboter Hersteller: ARBURG Typ: 570S2200-400/170e² Nsdpfsu E E H Sjx Adtjlf Baujahr: 2010 Schließkraft: 220 Tonnen Holmabstand 570 x 570 mm Einbauhöhe min. /max.: 350 mm Öffnungsweg: 1.000 mm Schnecken DN 1: 35 mm Max. Hubvolumen: 154 cm³ Spritzteilgewicht: 141 g/PS Schnecken DN 2: 30 mm Hubvolumen: 59 cm³ Spritzteilgewicht: 47 g/PS Steuerung: SELGOCIA Ausstattung: 3 x Kernzüge Vertikale Spritzeinheit 6 - ACHS Roboter, Hersteller: KUKA, Typ: KR 16 Wikut, Baujahr: 2010 Förderband Schutzzaun

Condition: good (used), For sale: - Injection molding machine, EPS pre-expander, automatic line for EPS (expanded polystyrene) box production – thermo boxes, fish boxes – used, in very good condition. The machine is currently still connected to the installation, which facilitates disassembly and labeling of individual connections for the buyer. Nlsdpjua Dqijfx Adtof - Complete machine, ready for connection to steam installation, EPS granulate transport, electricity, compressed air, and cooling system. - Year of manufacture: 2023 - Configurable mold for the production of EPS thermo boxes and fish boxes, 3 sizes, with or without holes, with lids – total of 6 configurations. Complete boxes with lids are produced in a single cycle – no need to change molds. - Set includes intellectual property rights to the box and fish box designs – full documentation provided. IMPORTANT! The machine can also be used to produce EPS construction shapes for walls, ceilings, etc. – see examples in one of the photos. We also have other production line components available. Check our other listings. We also have additional equipment for sale such as: - Injection molding machine, EPS pre-expander, automatic line for EPS foundation boards + mold for boards - EPS batch pre-expander - Steam installation: boiler house – machinery - 3 m³ steam tank - Installation for transporting expanded EPS - EPS silos - EPS crusher - Many spare parts Additional photos and information available upon request by email. Option to sell individual components of the set separately.

Year of construction: 2003, condition: ready for operation (used), Plastic processing machine manufactured in 2003. This DREHER S 42/65 GFS-15 GR features a powerful 45 kW drive motor and a working width of 650 mm. It includes a protective soundproof enclosure and a granulator function, along with various additional equipment such as a Z-conveyor belt and a discharge extraction station. If you are looking to get high-quality plastic processing capabilities, consider the DREHER S 42/65 GFS-15 GR machine we have for sale. Contact us for further details. Nljdpfxjzwg Efj Adtof - Drive Power: 45 kW- Motor Speed: 1,470 rpm- Motor Specifications: VEM motors GmbH, 45 kW, 400/690 V, 50 Hz- Rotor Diameter: 420 mm- Working Width / Rotor Width: 650 mm- Feed Opening: approx. 420 × 650 mm- Rotor Cutting Bars: 5 pieces- Stator Cutting Bars: 2 pieces- Enclosure / Features: Protective / soundproof enclosure, granulator function - Additional Equipment & Accessories: - Rotor Feature: Auxiliary flywheel fitted- Soundproof Booth: Segmented steel construction with 100 mm mineral wool insulation, forced ventilation fans, 3 access doors- Discharge & Extraction Station: Granulate extraction fan (5.5 kW motor, 230/400 V), cyclone ZA 160 with pneumatic material diverter, dust filter- Spare Parts: 1 extra set of cutting blades (5 rotor cutting bars, 2 stator cutting bars)

Year of construction: 2023, operating hours: 5 h, condition: as good as new (ex-display), functionality: fully functional, rotor diameter: 420 mm, rotor width: 800 mm, Genox GC800T Series - High Performance Granulator suitable for processing various materials including plastics, wood, rubber etc. 37kW Drive Motor with outboard rotor bearings, heavy duty precision machines rotor, and 580rpm operating speed as standard. 800mm wide x 420mm diameter cutting chamber with heavy duty, high inertia Cascade Rotor with 24 x rotor knives. Two rows of counter knives are mounted in the chamber. All knives are manufactured from Vacuum Heat Treated D2 Tool Steel. An electric assisted chamber opening with actuator with integrated safety interlocks and a setting jig is for pre-setting of knives off the machine are provided to enable quick, easy knife changes. Output size is controlled by replaceable screens mounted beneath the rotor shaft - sizes supplied as required (4mm-50mm). We can provide infeed conveyors and product conveying systems as required to transfer product in to bulk storage bags if required. Nsdpfx Adszudnxstjlf This machine is as new and in stock at our warehouse in the UK and has only been used previously for exhibition displays. Significant saving available over a newly built machine machine.

Year of construction: 2026, condition: new, functionality: fully functional, rotor diameter: 520 mm, rotor width: 1,200 mm, Genox GXC1200 Series - Heavy Duty Granulator suitable for processing various materials including plastics, wood, rubber etc. 75kW Drive Motor with outboard rotor bearings (90kW & 110kW drive options are available), heavy duty precision machined rotor, and 520rpm operating speed as standard. 1,200mm wide x 520mm diameter cutting chamber with a choice of either a 10 knife, 5 row V Cutting Rotor, or our heavy duty, high inertia Cascade Rotor with 60 x rotor knives. Two rows of counter knives are mounted in the chamber and as an option a third row can be mounted in the throat of the machine to increase cutting efficiency. All knives are manufactured from Vacuum Heat Treated D2 Tool Steel. Hydraulic assisted chamber and screen access with integrated safety interlocks, and a setting jig is supplied for pre-setting of knives off the machine to enable quick, simplified knife changes. Output size is controlled by replaceable screens mounted beneath the rotor shaft - sizes supplied as required (4mm-50mm). A sound attenuation enclosure is available as an option to minimise operational noise if required. We can provide infeed conveyors and product conveying systems as required to transfer product in to bulk storage bags if required. Nsdpfxozudnro Adtjlf

Condition: new, Year of construction: 2026, functionality: fully functional, nominal power: 55 kW (74.78 HP), rotor diameter: 520 mm, rotor width: 1,000 mm, Genox GXC1000 Series - Heavy Duty Granulator suitable for processing various materials including plastics, wood, rubber etc. Njdpfxezudnfj Adtslf 75kW Drive Motor with outboard rotor bearings (90kW, 110kW & 132kW drive options are available), heavy duty precision machined rotor, and 520rpm operating speed as standard. 1000mm wide x 520mm diameter cutting chamber with a choice of either a 10 knife, 5 row V Cutting Rotor, or our heavy duty, high inertia Cascade Rotor with 50 x rotor knives. Two rows of counter knives are mounted in the chamber and as an option a third row can be mounted in the throat of the machine to increase cutting efficiency. All knives are manufactured from Vacuum Heat Treated D2 Tool Steel. Hydraulic assisted chamber and screen access with integrated safety interlocks, and a setting jig is supplied for pre-setting of knives off the machine to enable quick, simplified knife changes. Output size is controlled by replaceable screens mounted beneath the rotor shaft - sizes supplied as required (4mm-50mm). A sound attenuation enclosure is available as an option to minimise operational noise if required. We can provide infeed conveyors and product conveying systems as required to transfer product in to bulk storage bags if required.