Used measuring & testing equipment for sale (1,399)

Condition: excellent (used), Heraeus Type: VT 6025 Heraeus Vacutherm vacuum drying oven Specification: Heating jacket VT 6025 Temperature (metric): 200 °C Internal dimensions (W x D x H): 300 x 307 x 275 mm External dimensions (W x D x H): 480 x 450 x 600 mm Electrical requirements: 230 V, 50/60 Hz Nwodpfozgbqzjx Aamek Frequency: 50/60 Hz Capacity (metric): 25 l Heating jacket type: without inert gas connection Voltage: 230 V, 1.3 kW, 5.9 A Weight: 58 kg Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data and specifications!) We would be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Incubator Type: Binder CB 210 CO² / 9140-0013 Technical data Temperature range: 7 °C above room temperature to 60 °C MB1 controller for temperature and CO2 concentration Internal volume: 210 liters External dimensions (W x H x D): 740 x 1069 x 715 mm Internal dimensions (W x H x D): 560 x 750 x 500 mm Weight: approx. 121 kg Nsdpezgbtcefx Aamjwk Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: good (used), H. Köhler HK 300 S Condensation Water Test Device Manufacturer: H. Köhler GmbH Type: HK 300 S Machine Type: Condensation Water Test Device / Corrosion Test Chamber Test Chamber Volume: approx. 300 l For sale is a used H. Köhler HK 300 S condensation water test device. The device is suitable for condensation water climate tests according to DIN 50 017, corrosion tests, coating tests, paint tests, material testing, and quality assurance. Technical Data Test chamber volume: approx. 300 l Temperature range: Room temperature to approx. +55 °C Humidity range: Saturation operation possible Test chamber heating: 1,000 W Power connection: 230 V / 50 Hz Connected load: 1,000 W Compressed air consumption during ventilation: approx. 3 Nm³/h Compressed air connection: 4.5 - 7.0 bar Deionized water connection: 2.5 - 4.0 bar Dimensions (W x D x H): approx. 1,200 x 600 x 1,750 mm Weight: approx. 100 kg Control HK PC102 control unit LCD display Programmable test sequences Condensation water climate DIN 50 017 Manual operation / test operation Alarm display Equipment Stainless steel test chamber Large glass door with seal Test chamber thermometer Manometer Ventilation system Compressed air connection Deionized water connection Drain connection Stainless steel base with rollers Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures. Display shows condensation water climate DIN 50 017. No documentation available. Scope of supply H. Köhler HK 300 S Condensation Water Test Device Stainless steel base Nwodezhadcjpfx Aamsk Accessories as shown in the pictures Scope of supply as shown in the pictures. Subject to changes, errors and prior sale.

Condition: new, “Partially unpacked for photography – unused item from warehouse clearance.” Quantity: 6 available Nodpezh Au Dsfx Aamewk Measuring head GT2-H32 Keyence

Condition: excellent (used), Keysight / Agilent InfiniiVision MSO-X 3034A Manufacturer: Keysight Technologies / Agilent Technologies Type: MSO-X 3034A Series: InfiniiVision Device Type: Mixed Signal Oscilloscope / Digital Storage Oscilloscope Bandwidth: 350 MHz For sale is a used Keysight / Agilent InfiniiVision MSO-X 3034A Mixed Signal Oscilloscope. This oscilloscope is suitable for precise signal and measurement tasks in development, laboratory, service, training, research, as well as industrial electronics and quality assurance. With 4 analog channels, 16 digital channels, and a maximum sampling rate of 4 GSa/s, the device offers versatile applications for demanding measurement tasks. Technical Data Manufacturer: Keysight Technologies / Agilent Technologies Series: InfiniiVision Type: MSO-X 3034A Device Type: Mixed Signal Oscilloscope / Digital Storage Oscilloscope Bandwidth: 350 MHz Analog Channels: 4 Digital Channels: 16 Max. Sampling Rate: 4 GSa/s Display: Color display MegaZoom Technology Inputs: 4 × BNC analog Logic/Digital Input USB Host USB Device Trigger Out External Trigger / Calibration Connector Power Connection: 100–240 V AC Frequency: 50 / 60 Hz Power Consumption: max. 100 W Dimensions (W × H × D): approx. 381 × 204 × 142 mm Weight: approx. 4 kg Features Large color display Front-panel control buttons 4 analog channels 16 digital channels MegaZoom Technology USB Host USB Device Trigger and analysis functions Measurement, storage, and printing functions Carrying handle 3 probes as shown in the pictures Power cable Accessories as shown in the pictures Application Areas Electronics development Laboratory Service Troubleshooting Signal analysis Printed circuit board testing Training Research and development Quality assurance Industrial electronics Scope of Delivery Keysight / Agilent InfiniiVision MSO-X 3034A 3 probes as shown in the pictures Power cable Accessories as shown in the pictures Condition Used. Optical condition as shown in the pictures. Nwsdpfx Aaszh I Dwjmek Inspection seals/stickers as shown in the pictures are present. Scope of delivery as described and shown in the pictures. Subject to changes, errors, and prior sale.

Condition: used, Year of construction: 2014, functionality: fully functional, Equipment: Laser microscope Control computer (Windows 7) Objective lens CF Plan 10x / 0.30 NA Objective lens CF Plan 20x / 0.46 NA Objective lens CF Plan ELWD 50x / 0.65 NA Objective lens CF Plan Apo 150x / 0.95 NA Suitable for general high-resolution 3D visualization, roughness measurement (profiles and surfaces), step analysis, 2D dimensions, etc. High degree of automation in the evaluation process through an Excel-based "VK Viewer". Inspection possible in 66540 Neunkirchen. Pickup only. I am happy to provide a four-hour training session upon pickup. The software is quite intuitive. Nwedpfx Aezh I R Djamsk Private sale. VAT not shown.

Condition: excellent (used), Kübrich Kübrich Test Systems 48V Belt Starter Generator - Component Test Bench Details of the test bench: (See Figure 13) Frame with (1) Mounting device for a belt starter generator (2) Load machine (3) Belt (4) MP1: Control cabinet (5) MP3: Control cabinet for control, interface panel with main switch, I/O Nedpfxezhkb Sj Aamewk (6) MP2: Control cabinet with Simotion (7) MP4: Control cabinet with DC-DC converter (8) H3: Measuring technology box (9) H4: Interface box Intended use: The test bench is used for conducting tests on belt starter generators during development. Technical data: Electrical connection data Power supply: 400 V / 32 A Battery simulation: 0 - 60 V Current: 0 - 250 A (continuous) Current: 330 A (briefly, less than 1 s) Control voltage: 24 V Mechanical performance data according to the data sheet of the load machine Note that a gear ratio of 1:2 to the test specimen shaft must be observed. Rotational speeds: Load machine: Manual operation: 0 - 50 1/min Automatic operation: 0 - 10,000 1/min Test specimen motor: Manual operation: 0 - 100 1/min Automatic operation: 0 - 20,000 1/min Dimensions and weight Width: 850 mm Height: 1386 mm Length: 1687 mm Weight: approx. 1.2 t Condition: used Scope of supply: (See Figure) (Changes and errors in the technical data and details are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: excellent (used), Weiss Model: WK3 600/0-M Weiss Climate Test Chamber, Water-Cooled Series: WK3-../0 with SIMPAC* Controller Test chamber volume: approx. 600 liters Test chamber dimensions: Height 950 mm, Width 800 mm, Depth 800 mm External dimensions: Height 1995 mm, Width 1090 mm, Depth 1660 mm Operating data: Test chamber lighting: LED 24 V, 6.8 W / Halogen bulb 2 x 24V, 50W Rated voltage: 1/N / PE AC 230 V ±10% 50 Hz Rated power: 2.3 kW Rated current: 10 A Site-provided fuse: 16 A slow-blow Control cabinet and operator panel protection class: IP 54 Maximum heat emission to environment: 1200 W Sound pressure level: Measured at a distance of 1m from the front, at a height of 1.6m: 46 dB(A) Data for temperature tests: Temperature range: -5°C to +90°C Temporal temperature deviation at center of usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1 K Temperature gradient (according to IEC 60068-3-5) Temperature change rate: Heating 0.6 K/min Cooling 0.3 K/min Heat compensation at +20°C to +50°C: 200 W Data for climatic tests: Temperature range: +10°C to +90°C Dew point range: 4 to +89.5°C Humidity range: 10 to 98 % r.h. Temporal temperature deviation at center of usable space: ± 0.1 to ± 0.3 K Spatial temperature deviation: ± 0.5 to ± 1 K Temporal humidity deviation: +1 to +3 % r.h. Refrigerant: R-404A Weight: 610 kg For your safety as a buyer, please note the following information! The following points are carried out in advance on our offered chambers: 1. Functionality check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used Scope of delivery: (See image) (Technical data and information subject to change and errors!) Nedpsziywrofx Aamewk We are happy to answer any further questions you may have by phone.

Condition: used, Weiss Type: WK111-600 Weiss Climate Test Chamber, Air-cooled Performance Data for Temperature Tests: Temperature range: -5°C to +90°C Temporal temperature fluctuation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±1 K (corresponds to temperature gradient): 1 to 2 K Temperature change rate: Heating: 0.5 K/min Cooling: 0.2 K/min Performance Data for Climatic Tests: Temperature range: +10 to +90°C Humidity range: 10 to 98% r.h. Temporal temperature fluctuation: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1 K (corresponds to temperature gradient): 1 to 2 K Temporal humidity fluctuation: ±1 to ±3% Nwsdpeziyxcofx Aamek Test Chamber Dimensions: Width 800 mm x Depth 800 mm x Height 950 mm Housing Dimensions: Width 1000 mm x Depth 1660 mm x Height 1975 mm Access Ports: 1 access port Ø 50 mm on the left side installed 1 access port Ø 125 mm on the right side installed Power Supply: 1/N/PE AC 230V ±10% 50Hz Rated power: 2.3 kW Rated current: 10.0 A Refrigerant: R 404 A Capacity: 600 liters Weight: 540 kg For your security as a buyer, please note the following information! The following steps are performed on all our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Specifications and technical data subject to change and errors excepted!) If you have further questions, feel free to contact us by phone.

Condition: excellent (used), Weiss Type: WK-600/70 (I)-(II) 2 G EEx /22605147 Weiss Climate Chamber, Water-Cooled (Test chamber, explosion-proof) Njdpjzh D Ryefx Aamswk INERTIZATION WITH NITROGEN / EXPLOSION-PROOF TEST CHAMBER Technical Data: Test chamber designation: WK-600/70 (I)-(II) 2 G EEx External dimensions with hinges and door lock: Height 1995 mm, Width 1090 mm, Depth 1660 mm External dimensions without hinges and door lock: Height 1995 mm, Width 1000 mm, Depth 1660 mm Test chamber volume: approx. 600 liters Cold/Heat operation: -70 to 180°C Climate operation: 10 – 95°C Humidity: 10...98 % RH Temperature change per unit of time: Cooling: approx. 2.5 K/min Heating: approx. 4 K/min 3/N/PE AC 400V ±10% 50Hz Rated power: 14 kW Rated current: 25 A Fuse (on customer's side): 32 A, slow-blow Permissible weight of test specimens: Total load of the shelf supports: 80 kg Test chamber floor: 80 kg, insert shelf: 40 kg Weight: 800 kg Refrigerant: R 404A/R 23 (Evaporator of the air conditioning system has been replaced) For your safety as a buyer, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: excellent (used), Weiss Type: SC/KWT 450 Salt Spray Chamber Technical Data: Test chamber volume: 450 liters Maximum load: 100 kg Brine reservoir: 180 liters External dimensions: Height 920 mm, Width 1930 mm, Depth 800 mm Test chamber dimensions: Height 740 mm, Width 850 mm, Depth 570 mm Applications: Corrosion tests: Salt spray test: Ambient temperature up to +50°C Nwsdpfxjziixfo Aamsk Condensation water test: Ambient temperature up to +45°C Humidifier +75°C Temperature stability The temporal temperature deviation is ± K. Voltage: 1/N/PE AC 230V ±10% 50Hz Rated power: 2.0 kW Rated current: 8.5 A Combination: Salt spray test SS: DIN 50021 Condensation water test KFW: DIN 50017 Standard climate (ventilation): DIN 50014 Weight: 180 kg Condition: used Scope of delivery: (See picture) (Subject to technical modifications and errors! All provided data are subject to change!) For further questions, please feel free to contact us by phone.

Condition: excellent (used), Zeiss Coordinate Measuring Machine Model: O-INSPECT 442 Machine Designation: Coordinate Measuring Machine Machine Type: O-INSPECT 442 The multisensor measuring machine O-INSPECT ZEISS enables optimal optical or contact measurement of all features. The CALYPSO software simultaneously displays the actual state, nominal profile, and deviations, making measurement results easy to identify and interpret. General Data: Dimensions: Width 1055 mm, Length 1351 mm, Height 1770 mm Measuring range: X 400 mm, Y 400 mm, Z 200 mm Weight: CMM 800 kg Workpiece, max. 20 kg CMM noise level < 70 dBA Electrical Data: Supply voltage: 100, 110, 120, 125, 230, 240 V~ (± 10 %) Current type: 1 / N / PE Frequency: 50 to 60 Hz (± 3.5 %) Power consumption: max. 1500 VA Fuses: At 230 V or 240 V: 16 A At 100 V or 125 V: 15 A Travel Speeds: Creep speed, SLOW function: 0 to 5 mm/s Setup mode: 0 to 70 mm/s Automatic measurement: Axis (X, Y) max. 200 mm/s Axis (Z) max. 50 mm/s Axis (3D) max. 287 mm/s Ambient Conditions: The following conditions must be met for proper operation of the measuring machine. Operating ambient temperature: +17°C to +35°C Relative humidity: 40% to 70% (non-condensing) Room temperature for measurement: 20°C ±1 K Altitude above sea level: 100–125 V: max. 3000 m 230–240 V: max. 2000 m Probe System: Probe System: CFS Probe Types Data: Probe Type: CFS 2 mm Measuring range: 2 mm, Working distance: 61 mm, Spot diameter: 12.5 µm Measurable surface angle to beam direction: 90 ± 15° Measuring range: 3 mm, Working distance: 22.5 mm, Spot diameter: 12 µm Measurable surface angle to beam direction: 90 ± 30° Measuring range: 10 mm, Working distance: 70 mm, Spot diameter: 24 µm Measurable surface angle to beam direction: 90 ± 20° The values for surface angles are limit values and depend on the reflectivity of the workpiece surface. Nsdpfx Aaezii Dhjmswk Rotary Table: Mass and resolution Table weight: 7 kg Resolution: 0.15’’ Dynamics: Angular speed max: 50°/s Rotational speed: 8.3 min⁻¹ Scope of Delivery: In the standard version, the O-INSPECT coordinate measuring machine is supplied with the following components: - Coordinate measuring machine (CMM) - Controller (integrated) - Control panel - PC with peripherals - Software - CALYPSO 5.2 - Documentation - Probe system - Reference stylus - Calibration artifact - Calibration template Scope of delivery: (Zeiss coordinate measuring machine as shown) Condition: used (Specifications subject to change and errors excepted!) Please inquire about transport options prior to purchase. If you have further questions, we are happy to assist you by phone.

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 60766, API Radian R20 Laser Tracker – a professional 3D measurement system For sale is a professional 3D laser tracking and measurement system, the API Radian R20, used in industry, quality control, automation, robotics, and industrial metrology. Nedpfx Aajzila Ssmewk The device is fully functional, ready for use, and comes from the equipment of a research and development company. The tracker was used in industrial conditions as intended. Technical data: Manufacturer: API – Automated Precision Inc. Model: Radian R20 Serial number: 60766 Year of manufacture: 2016 Measurement range: 20 m Technology: Laser Tracker 3D The set includes: API Radian R20 Laser Tracker controller / control unit SMR reflector tripod tracker transport case accessory transport cases cables and accessories as shown in the photos Technical condition: The device comes from the equipment of a research and development laboratory. The technical and visual condition corresponds to the product photos. Before sale, the equipment undergoes technical verification. Commercial information: The product is covered by a start-up warranty. If you have any questions or need additional information, please send a message or contact us by phone.

Condition: excellent (used), Here we offer a Weiss climate testing chamber. Weiss climate testing chamber, water-cooled (Refrigerant converted to R-452A) Temperature testing Volume 335 liters Test chamber dimensions: Test chamber dimensions: Height 750 mm, Width 580 mm, Depth 765 mm External dimensions: Height 1775 mm, Width 870 mm, Depth 1600 mm Minimum temperature -42°C Maximum temperature +180°C Temperature change rate, cooling 4 K/min Temperature change rate, heating 3.2 K/min Temperature deviation, time-based ± 0.1 to ± 0.5 K Njdjzgavvspfx Aamewk Temperature homogeneity, spatially ± 0.5 to ± 1.5 K Climate testing: Temperature range +10°C to +95°C Dew point range -3°C to +94°C Humidity range 10 to 98% RH Temperature deviation, time-based ± 0.1 to ± 0.3 K Temperature homogeneity, spatially ± 0.5 to ± 1 K Humidity deviation, time-based ± 1 to ± 3 % RH Voltage: 3/N/PE AC 400V±10% 50Hz Rated power 4.1 kW Rated current: 14 A Refrigerant: R-452A Type: WK3-340/40 Weight Approx. 515 kg For your security as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), The DAGE Series 4000 Bond Tester is a professional device designed for performing Bond Pull and Die Shear tests in the semiconductor and electronics industries. This device is used in quality control laboratories, research and development departments, and during the production of microelectronic components. This unit is equipped with a precision positioning table, joystick controls, a keypad panel, and work lighting. The set also includes the original PCI control card (Baldor NextMove PCI-2 Motion Control Card) and additional electronic components visible in the photos, which are a valuable addition to the set. Technical data: Manufacturer: DAGE (Nordson DAGE) Model: DAGE Series 4000 Bond Tester Year of manufacture: 2010 Nodpozma Tbjfx Aamowk Power supply: 110 / 230 V AC, 1-phase Frequency: 50/60 Hz Power: 250 VA Control: joysticks and keypad Precision XY positioning table Required compressed air: 4 bar (oil-free) Vacuum connection Excellent visual condition. The set being sold is consistent with the presented photos and includes all visible components, including the additional PCI control card.

Year of construction: 2023, condition: new, - modern ergonomic design - manual test with analogue Measuring Clock Nwodpfx Aaepbbc Hsmok (Reading accuracy 0.2 HR) - easy to use and quick test process - Height Capacity approx. 185mm - Hepth Capacity approx. 160mm - Dimensions 545x182x755mm Test loads: 60 / 100 / 150kg Test method: HRA/HRB/HRC Standard delivery: - Hardness tester - V-Anvil - Flat Anvil Ø150mm - Flat Anvil Ø50mm - Ball Indenter 1/16" with ball - Diamond indenter 120° Rockwell - Spindle protection - Accessory case

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 1,000 kg, 1 Tone Horizontal Balancing Machine Maximum Rotor Weight --- 1000 kg (2,204.6 lbs) Minimum Rotor Weight ---10 kg (22.05 lbs) Maximum Rotor Diameter ---1400 mm (55.12 in) Minimum Shaft Diameter ---10 mm (0.39 in) Maximum Shaft Diameter ---240 mm (9.45 in) Motor Power ---7.5 kW (10.06 HP) Drive ---7.5 kW (10.06 HP) Nwedpfxsq T Iklj Aamok Maximum Balancing Speed ---0-1500 RPM (25 Hz) (up and down adjustable) Drive Unit ---Belt Drive Unıt / Cardan Possible Bed Length --- 3000 mm (118.11 in)

Condition: good (used), Lichtschranke , Schutzfeldhöhe 605 mm , Reichweite bis 6 m , IP 65 Nwodpfoi An Epsx Aamjk

Condition: used, Pore finder, pore finder, surface tester -portable high-voltage pore detector -Pore locator is an ideal device for detecting pores and imperfections -in dielectric (electrically insulating) coatings -such as paints, enamels, plastic layers on all metals and concrete. -Dimensions: 390/220/H260 mm Nodpfxjb Uhtqj Aamjwk -Weight: 7 kg

Condition: good (used), -Testing device for electrical equipment Nwodpfxjb A Ivze Aamok -each with isolation transformer -Number: 7 available -Price: per piece

Condition: used, Test device, test device for personal earthing, Safety Pips -Manufacturer: Wolfgang Warmbier, test device for personal earthing, original packaging -Type: Safety Pips Njdpfxotuyc Ds Aamjwk -Article No.: 7100.181 -Operating mode: Battery operation 9V -Dimensions box: 115/110/H70 mm -Weight: 0.2 kg

Condition: good (used), Force measuring device, force measuring instrument, calibration, force measurement technology, load cell, tensile force measuring bearing, force sensor, tensile and compressive force sensor -Manufacturer: Lorenz, 4 pieces tension and compression force sensor with Durbal, rod end spherical bearing -Sensor: Lorenz Type K-12 -Measuring range: - 100 kN -Sensitivity: 1.000mV/V / 0.999mV/V / 1.001mV/V -Swivel bearing: Durbal EF 35-20-501 -Dimensions of the articulated rod: 445 to 530 x 81 x 65 mm Nwedpfx Aeg Sxyvsamok -Fork head: Bore Ø 35 mm -Number: 3 boxes available, sensitivity as shown in photos -Price: per box -Box dimensions: 590/390/H200 mm -Weight: 30.2 kg/box

Condition: used, Year of construction: 2004, WENZEL SCM 500 Smart Coordinate Measuring Machine in well-maintained and fully functional condition. The machine features a robust and compact design, specifically engineered for flexible use directly in the production environment or inside the measuring room. Combined with high-precision guideways, this proven structure ensures excellent measuring accuracy, stability, and outstanding repeatability within a minimal footprint. The SCM 500 Smart is designed for reliable, fast deployment in quality assurance as well as near-line series production, delivering consistent measuring results even under demanding shop-floor conditions. Prior to delivery, the machine will be fully inspected and subjected to a test run by our service technicians in Remscheid to guarantee complete functionality. The system is currently powered up and can be inspected and demonstrated at any time. PC System & Operating System (Upgraded): The machine is already equipped with a modern, high-performance PC system running the latest Windows 11 operating system. The entire configuration meets the current requirements of WENZEL, has been comprehensively tested, and operates with absolute stability, ensuring the CMM is immediately ready for integration into your processes. Optional Services (Subject to Agreement): - Installation and commissioning of the measuring machine within NRW (North Rhine-Westphalia) - Generation of a factory calibration certificate - Determination of length measurement uncertainty - Determination of probing uncertainty - Determination of repeatability range - Execution in accordance with DIN EN ISO 10360-2:2010-06 - Determination of probing uncertainty in accordance with DIN EN ISO 10360-5:2020-11 - Including full documentation - DAkkS calibration by the accredited Klostermann calibration laboratory - Accreditation number: D-K-17518-01-00 - Accredited according to DIN EN ISO/IEC 17025:2018 - Training courses for the WM | Quartis measuring software - Contract programming for your components Additional Information: Upon request, the machine can be retrofitted with a suitable Renishaw probe system (e.g., PH10 or other upgrade options). The retrofit includes additional services as well as supplementary hardware components, which will adjust the purchase price accordingly. Further software modules, customizations, individual accessories, and clamping systems are available upon request – perfectly matched to your specific measurement requirements. Njdpfx Aajzkug Rjmowk Measuring range X: 500 mm Measuring range Y: 450 Measuring range Z: 400 mm Measurement uncertainty: Eo = 8,0 + L/250 [μm] Installed software: WM | Quartis R2026-1 Controller: WPC2030 PC System: Windows 11 Probing system: TP20 Probe head: PH6 Probe module: 1 × TP20 Standard Force Module Joystick: HT400 Accessories: Stylus kit M2 | Mouse & keyboard | 2 × 24" TFT monitors | Printer Included services: Final inspection upon purchase | Disassembly and transport preparation | Packing | Loading onto customer-provided truck

Condition: excellent (used), Memmert GmbH Climate Testing Chamber / Temperature Testing Chamber Used Memmert climate testing chamber, type CTC 256, for temperature and climate testing. This unit is suitable for environmental simulation, material testing, quality assurance, research and development, as well as stress and aging tests. Technical data: Manufacturer: Memmert GmbH + Co. KG Type: CTC 256 Test chamber volume: approx. 256 liters Test chamber dimensions: approx. 640 x 597 x 670 mm (W x D x H) Housing dimensions: approx. 898 x 1100 x 1730 mm (W x D x H) Weight: approx. 320 kg Temperature range: -42 °C to +190 °C Heating rate: approx. 3.35 K/min Cooling rate: approx. 2.8 K/min Humidity function available Refrigerant: R404A Rated cooling capacity: 2.53 kW Max. operating overpressure: 30 bar Mains connection: 3/N/PE AC 400 V / 50 Hz Rated power: approx. 7.0 kW Rated current: approx. 10.6 A Equipment Nwjdpfozlidtsx Aamok Programmable controller Viewing window Stainless steel interior Air circulation system Ethernet interface Printer connection Alarm contact 230 V service socket Shelf insert Documentation available Scope of delivery Memmert CTC 256 climate testing chamber Shelf insert Water canister Documentation / test report Accessories as shown in the pictures Condition Used, optical condition according to the pictures. (Changes and errors in the technical data are subject to change!) Subject to prior sale.

Condition: excellent (used), For sale: Professional KEYENCE IM-7500 measuring system with IM-7020 head. The device is designed for fast and highly precise measurement of components in production and quality control. The equipment enables automatic measurement of multiple dimensions simultaneously using a camera. Ideal for CNC workshops, tool rooms, and industrial applications. Technical data Manufacturer: KEYENCE Model: IM-7500 Head: IM-7020 Type: Optical measuring system Country of origin: Japan Automatic measurement by camera High measurement accuracy Condition Used Fully functional Normal signs of use Nwsdpsyvv Trjfx Aamsk Included in the set KEYENCE IM-7500 unit IM-7020 head Monitor Control unit Keyboard and mouse Wiring