Used 60X40 Plates for sale (12,147)

Condition: excellent (used), Year of construction: 2000, control type: NC control, actuation type: hydraulic, controller manufacturer: Davi Smart, number of rollers: 4, roller (bottom) diameter: 340 mm, roller (top) diameter: 370 mm, side roll diameter: 320 mm, roller length: 3,100 mm, sheet thickness (max.): 25 mm, overall weight: 18,500 kg, total length: 5,900 mm, total width: 2,200 mm, total height: 2,300 mm, power: 30 kW (40.79 HP), 4 roll plate bender Davi Promau - MCB 3037 MACH-ID 9613 Make: Davi Promau Type: MCB 3037 Control: Davi Smart Year: 2000 Conical bending attachment Extended roll end for section bending jobs Digital read out position side rolls Central lubrication Rolling width: 3100mm Rolling thickness 3x toproll Ø:20mm Rolling thickness 5x toproll Ø:25mm Rolling thickness prebending: 22mm Top Roll Ø: 370mm Bottom Roll Ø: 340mm Side roll Ø: 320mm Number of rolls: 4 Rolling speed: 0-5 Hnjdpfszcnuyjx Ap Hjn Adjustiment lower roll: 0-200mm/min. Adjustment side rolls: 0-200mm/min. Number of driven rolls: 2 Power: 30kW Length: 5900mm Width: 2200mm Height: 2300mm Weight: 18500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), functionality: fully functional, Year of construction: 1994, Used SCHRÖDER motorized guillotine shear, type MHSU, built in 1994, No. 121204 Hodpfx Apov Tzphs Henn Usable length: 1030 mm Max. sheet thickness: 2.5 mm - Pneumatic hold-down device - Front support arms 1000 mm - Digital back gauge 750 mm - Right-angle stop - Sheet support device - Forward sheet slide - Rear area protection with protective cage - Foot switch The machine is in stock at our location in 71334 Waiblingen-Beinstein and is available immediately.

Condition: good (used), Year of construction: 2010, sheet width 4100 mm plate thickness 6.35 mm thickness at "Niro-steel" 4.00 mm cutting angle 0.5 - 2.5 ° cutting gap adjustment 0.05 - 0.8 mm no. of strokes 9 - 26 Hub/min back stop - adjustable 10.0 - 750 mm down holder 22 Stk. oil volume 200 ltr. engine output 7.5 kW weight 8000 kg. Hnedpfozcqy Sex Ap Hon range L-W-H 5145 x 2200 x 1750 mm From a maintenance workshop Very well-maintained / good condition With very few operating hours (!!) Current list price approx. 60.000 euros Special price upon request Features: - Robust electro-hydraulic, slide-guided sheet metal shear - LVD control panel centrally located on the front of the machine (left) - Electro-hydraulic cutting angle adjustment * Includes digital display of actual values - Manual cutting gap adjustment * via handwheel from the front (left) * Includes analog value display - Electro-motorized backgauge with ball screws * Includes digital actual position display * Rapid traverse is possible - 1x extra-long side stop 3,000 mm, with support foot - 1x long support arm - Ball-bearing recessed handles in the support table - Front finger guard - Rear sheet metal chute - Safety device - rear (protective grille) - 1x freely movable foot switch - Machine lighting at the front (custom-built) - Operating instructions

Condition: good (used), 2 used T-slot angle plates Height: 1500 mm Width: 1000 mm Hsdpsy Iakfsfx Ap Hjnn Depth: 500 mm 10 transverse slots 3 longitudinal slots First-class surface finish

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, roller (top) diameter: 130 mm, side roll diameter: 110 mm, working width: 1,030 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, power: 2.2 kW (2.99 HP), number of digital displays: 3, Equipment: emergency stop, foot remote control, 4-Roll Round Bending Machine Manufacturer: Sahinler, Type: 4RM 10-130 HRC Year of Manufacture: 2008 Technical Data Manufacturer: Sahinler Type: 4RM 10-130 HRC Year of Manufacture: 2008 Usable Length: 1030 mm Top Roll Diameter: 130 mm Side Roll Diameter: 110 mm Hsdpfx Aozcpu Uep Honn Sheet Thickness (without pre-bending): 6 mm Sheet Thickness (with pre-bending): 5 mm Total Power: 2.2 kW Dimensions: 2.4 x 1 x 1 m Weight: approx. 1.5 t Equipment • Hardened rolls • Digital display for roll positioning All information without guarantee.

Condition: used, Year of construction: 2000, plate punches 1. Beil 780-S-St - 3-hole 780/425 - table 1000-1400 2. Bacher 2005 - 2-hole 425 - table 730-1000 3. Bacher 2045 - 2-hole 425 - table 730-1000 4. Beil 425-T-H - 2-hole 425 - table 520-770 5. Stanze 2-hole 425 - table 420-660 - metal frame - SOLD 6. Billows 2-hole 225 - table 650-950 7. Bacher 2032 2-hole 225 - table 300-400 (4) - 1x SOLD Hnjdpfxecqxv Te Ap Hsn 8. Heidelberg SM52 - 425 plate punch 9. Heidelberg SM52 - plate bender - SOLD

Condition: used, length 450 mm width 140 mm height 100 mm 2 magnetic plates with control unit Hodpfxszcghrj Ap Hjnn approx. 450 x 140 x 100 mm

Condition: used, length 900 mm width 505 mm Hodpfezcgkysx Ap Henn height 110 mm weight 310 kg The electro-magnetic clamping plate is in good, ready-to-use condition. Length: 900mm Width: 505mm Height: 110mm Weight: 310kg We have two identical magnetic chucks with the same dimensions. See S9061

Condition: used, length / mm width / mm Hnodpfx Aszcgiiep Hen

Condition: used, Year of construction: 2019, 1 unit of SHERPA PPS disc brake testing stand with digital LED display unit SHERPA AZE-020-ECO-D, self-disassembly feature Color: as shown in the pictures, according to the images and inspection Year of manufacture: 2019 Condition: used Location of the goods: Hall 2 Payment method: prepayment by bank transfer Shipping: self-collection only from the Hofgeismar location Hnodezcmfdopfx Ap Hon

Condition: used, For inquiries regarding the road plates, please contact Mr. Herden (at ). Road plates / ground protection mats / incl. frame / 15 mm thickness / NEW / in stock & immediately available Price for 30 road plates incl. transport frame: €4,400.00 net / €5,236.00 gross - Dimensions (mm): 2,400 x 1,200 x 15 - Material: Hard plastic - Weight per plate (kg): 43 - Load capacity up to (t): 50 Properties of the transport frame: Material: Steel, galvanized The frames are stackable Plastic ground protection mats are the ideal solution for the temporary paving of construction site roads, meadows, during roadworks and events, during demolition work, and in landscaping projects. Plastic road plates protect sensitive surfaces (such as lawns, paved driveways) and prevent vehicles from getting stuck in the mud. We have a very large selection of various attachments in our warehouse, which are immediately available! Mr. Herden (at ) will be happy to assist you. Upon request, we will also gladly provide you with a financing offer. We are the official Westtech sales and service partner. We are the official OilQuick sales and service partner. We are the official Holp sales and service partner. We are the official Magni telehandler sales and service partner. We are the official DMS sales and service partner. We are the official Gierking GMT sales and service partner. We are the official Weber MT sales and service partner. We are the official Seppi M. sales and service partner. We are the official JCB construction machinery sales and service partner. We are the official Mercedes-Benz sales and service partner. We are the official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. Errors and prior sale excepted! = Further information = New: Yes Intended use: Construction Please contact Marius Herden for further information. Hnsdpszcuc Djfx Ap Hsn

Condition: new, Year of construction: 2026, number of rollers: 3, roller (bottom) diameter: 95 mm, roller (top) diameter: 95 mm, side roll diameter: 95 mm, roller length: 1,270 mm, sheet thickness steel (max.): 3 mm, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, swiveling upper roller, - Capacity 1270 x 3 mm - Conical rolling - Swing-out top roll - Foot pedal operation - Brake motor Hnsdpfjxn Rrqsx Ap Hen - Emergency stop - Documentation - 400V

Condition: like new (used), functionality: fully functional, Year of construction: 2022, operating hours: 10 h, actuation type: electric, number of rollers: 3, roller (bottom) diameter: 130 mm, roller (top) diameter: 130 mm, roller diameter: 130 mm, roller length: 2,050 mm, working width: 2,050 mm, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 3 mm, overall weight: 1,500 kg, total length: 3,200 mm, total width: 750 mm, total height: 1,000 mm, power: 2.2 kW (2.99 HP), Equipment: cone bending device, foot remote control, swiveling upper roller, For sale is a high-quality 3-roller sheet metal rolling machine, Sahinler IRM 2050 x 130, with an electric drive. The machine was only purchased for one project and has approximately 10 operating hours. Technically and visually, it is in almost new condition. Particularly practical: The machine is equipped with heavy-duty rollers, making it mobile and allowing for flexible movement within the workshop. Technical data: Manufacturer: Sahinler Type: IRM 2050 x 130 Year of manufacture: 2022 Operating hours: approx. 10 h Usable sheet metal length: 2,050 mm Maximum sheet metal thickness: 3 mm Roller diameter: 130 mm Drive power: 2.2 kW Weight: approx. 1,500 kg Dimensions (L x W x H): 3,200 x 750 x 1,000 mm Equipment: 3-roller design Hnodpozdnfmsfx Ap Hen Asymmetrical roller arrangement with pre-bending function 2 driven rollers with brake motor Swiveling top roller forward Forward and reverse operation Conical rounding by tilting the rear roller Mobile control panel Mobile thanks to retrofitted heavy-duty rollers The machine is ready for immediate use and can be inspected by arrangement. If you are interested or have any questions, please do not hesitate to contact me.

Condition: new, functionality: fully functional, Year of construction: 2024, MOSER Hydraulic Guillotine Shear Model: HGL 3106 Hjdexgtq Tjpfx Ap Honn Stock machine Serial No.: 30603 Year of manufacture: 10/2024 Specifications: - Swing beam design - Upper blade: Two cutting edges - Lower blade: Four cutting edges - Suitable for single and continuous stroke operation - Motorized blade gap adjustment - Motorized backgauge, 750 mm with ball screw spindles, foldable, positionable via NC controller, CYBELEC, model: CybTouch 8 W - Fixed angle stop with scale and foldable stop cam - Worktable with support plates and support balls integrated into the table - Two front support arms - Finger guard with light barrier - Side and rear safety covers - Cutting line illumination - Technical documentation - CE compliant - Colors: * RAL 7015 – Slate grey * RAL 7035 – Light grey * RAL 3003 – Ruby red Technical Data: Sheet thickness ≤ 450 N/mm²: 6 mm Sheet thickness ≤ 700 N/mm²: 4 mm Cutting length: 3,060 mm Cutting angle: 1.6° Main motor: 11 kW Number of hold-downs: 17 pcs Strokes per minute: 20 pcs Oil tank: 160 liters Usable backgauge measuring range: 750 mm Backgauge positioning motor: 0.37 kW Dimensions (L x W x H): 4,000 x 2,200 x 1,700 mm Weight: 5,500 kg

Condition: good (used), Top of the range plate washing system for high throughput. Has come from Wembley Football Stadium where it was washing plates for the hospitality areas. Lovely condition and with options Hnjdevd Eiyjpfx Ap Hsn

Condition: new, Universal panel transport assistant Ideal, space-saving aid for edge banding machines, panel saws, and all other processing machines where the workpiece needs to be moved. Height-adjustable panel transport assistant Working height infinitely adjustable from approx. 900 mm to approx. 1,200 mm Special polygonal body with anti-slip coating for optimal grip in any position Hsdjw I Uz Repfx Ap Henn 5 heavy-duty swivel castors with high-quality locking mechanism for stable standing Automatically moves along edge banding machines and panel saws Weight: approx. 8 kg Availability: in stock Storage location: Hochheim

Condition: used, Plate trolley as a welded construction made of steel used one-sided loading area made of plywood 5° incline Side bar height: 915 mm Trolley powder-coated RAL 5010 gentian blue permanent or surface-protected impact and scratch-resistant tires made of thermoplastic rubber on plastic rims Hedjwkbayjpfx Ap Hjnn with precision deep groove ball bearings, gray, "no marks" thread and foot protection 2 swivel castors with wheel locks and 2 fixed castors 1500 x 370 Wheel diameter (mm)200 x 40 Load capacity (kg)500 Weight (kg)47.5 Dimensions (WxDxH, mm)1500 x 680 x 1200 Availability: short term Storage location: Flörsheim

Condition: good (used), 1x electromagnet with coolant connection, 500 x 200 x height 125 mm, and 1x electromagnet without coolant connection. Items are sold individually. Hodpfx Apjzc Eays Hjnn

Condition: used, Technical details: Hnedpfxszcwr Io Ap Hsn floor-plate length: 4000 mm plate width: 1500 mm plate height: 250 mm weight of the machine ca.: 4,6 t space requirements of the machine approx.: 4,0 x 1,5 x 0,25 m *

Condition: like new (used), functionality: fully functional, 2 magnetic clamping plates with domes Hnodpfx Apezcg D Ho Hsn including control unit and connecting cable, 5 m

Year of construction: 2006, condition: used, functionality: fully functional, machine/vehicle number: 12/06, We are offering this used METAL WORKING CZ, s.r.o. SPS2000 CNC hot plate welding machine, manufactured in 2006. Hnsdezdfc Djpfx Ap Hon If you have any questions or require further information, please do not hesitate to send us a message or contact us by phone.

Condition: used, Year of construction: 2008, total length: 4,500 mm, total width: 1,700 mm, total height: 1,200 mm, Empty weight: 7.000 kg - Year: 2008 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 20830013 - Drive system: Teach-in - Number of rolls [pcs.]: 3 - Number of driven rolls [pcs]: 2 - Power [kW]: 11.0 - Max. sheet thickness [mm]: 16 - Max. working width [mm]: 2000 - Transport dimensions: 4500mm x 1700mm x 1200mm (l x w x h) - Transport weight [kg]: 7000kg Hedpfx Apjxdigfj Hjnn Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, GEA WTT GBS 700M-U-86 Plate Heat Exchanger New, unused plate heat exchanger from stock. Suitable for industrial refrigeration, heat transfer, and process applications. Manufacturer: GEA WTT GmbH Type: GBS 700M-U-86 Hedpfezb Nvisx Ap Hsnn Part Number: 12509184 Serial Number: 10-120106888-0001 Design: Brazed plate heat exchanger Number of plates: 86 Version: G1, G2, G3, G4 Temperature range: -200 °C to +200 °C Max. operating pressure side 1: 30 bar Max. operating pressure side 2: 30 bar Volume side 1: 9.66 l Volume side 2: 9.89 l Volume side 3: 0.00 l Refrigerant: All refrigerants except ammonia Country of manufacture: Germany Condition: NOS (New Old Stock) Location: Kusel

Condition: good (used), Year of construction: 1998, control type: NC control, number of rollers: 4, roller (bottom) diameter: 540 mm, roller (top) diameter: 560 mm, side roll diameter: 420 mm, roller diameter: 440 mm, roller length: 3,100 mm, overall weight: 45,000 kg, total length: 8,700 mm, total width: 2,900 mm, total height: 3,075 mm, power: 81 kW (110.13 HP), 4 roll plate bender HAEUSLER - VRM-hy MACH-ID 9638 Make: HAEUSLER Type: VRM-hy Year: 1998 Smallest bending diameter 640 mm Pressing force against upper roll 5800 kN Conical bending attachment Central lubrication Equipped for change rolls Rolling width: 3100mm Rolling thickness 3x toproll Ø:50mm Rolling thickness 5x toproll Ø:60mm Hodpfx Apezbqquo Hjnn Rolling thickness prebending: 40mm Top Roll Ø: 560+440mm Bottom Roll Ø: 540mm Side roll Ø: 420mm Number of rolls: 4 Rolling speed: 0-6 Adjustiment lower roll: 0 - 200mm/min. Adjustment side rolls: 0 - 500mm/min. Number of driven rolls: 2 Power: 81kW Length: 8700mm Width: 2900mm Height: 3075mm Weight: 45000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1991, 3-roll plate bending machine Plate width: 3000 mm Plate thickness: 20 mm Pre-bending: 16 mm Top roll diameter: 380 mm Hnjdpfszcnvdjx Ap Hjn Side roll diameter: 340 mm