Used Aluminum / Steel-Sawing Machine for sale (79,835)

Condition: used, Max. saw blade diameter: 800mm, feed speeds: 3, max. feed 80teeth/min, motors: 2. With dressing device and coolant system. All motor cables and switch connectors were replaced. The machine was completely dismantled, cleaned and workshop-overhauled. Documentation available. Inspection possible by appointment. Lsdez A Ekbspfx Aiqehl

Condition: used, lot of debite machines moulders hydraulic shovel 27t and 42t polisher capacity 600mm to 2000mm vertical and horizontal slitter block size 2000 x 1800 3-point shovel etc. approx. 300 tons negotiation on site always in French, English by appointment or by e-mail translator Lsdpfx Ajncfpbeiqehl

Condition: good (used), saw blade diameter: 350 mm, – Saw blade, 350 mm – Double miter cut Ljdpounh H Eofx Aiqohl – Hydrocheck system – Protective cover – Mist lubrication system – 400 V

Condition: excellent (used), Bargain in excellent condition: panel saw and spindle moulder with tooling Lhjdpfx Aiey Ni Ayeqjl

Condition: excellent (used), Catalogue number 7757 TECHNICAL DATA Milling machine - Spindle diameter: 25mm - Spindle height: 120mm - Interchangeable spindle, tiltable 20 degrees - Spindle locking Ledpfxezr I E Ao Aiqehl - Height adjustable (up/down) - Original guide fence - Table dimensions: 1120x750mm - 4 spindle speed settings - Motor: 3.8 kW Circular saw - Max blade diameter: 350mm - Spindle axis: 30mm - Blade adjustable (up/down and angle) - Spindle locking - Cutting width at fence: 540mm - Cast iron table - Dimensions (L/W/H): 1260x900x1000mm - Weight: 610kg ADVANTAGES – Made in Poland – DTR documentation available – Used milling machine, very good condition Net price: 6900 PLN Net price: 1640 EUR (based on exchange rate 4.2 EUR) (Prices may vary with exchange rate fluctuations)

Condition: new, CATALOGUE NUMBER RE060 - New machine TECHNICAL SPECIFICATIONS - Saw blade diameter ⌀250 – 350/30 mm - Scoring blade diameter (works only with blades ⌀300, 350 mm) ⌀120/20 mm - Main motor power 4 kW - Scoring motor power 0.75 kW Lhsdpfxezrk N Ro Aiqol - Spindle speed 4000 rpm - Scoring spindle speed 8800 rpm - Blade tilting 0 – 45° - Max. cutting length 1600 mm - Rip fence cutting width 1250 mm - Riving knife ⌀350 mm - Spindle flange diameter 87.5 mm - Table fence set at 90° – 45° angle, accuracy ±1° - Max. cutting height with blade ⌀300 mm: 95 mm - Max. cutting height with blade ⌀350 mm: 120 mm - Upper dust extraction port diameter ⌀80 mm - Lower dust extraction port diameter ⌀100 mm - Weight 480 kg - Machine dimensions (folded) 2020x3380x1200mm Net price: 16000 PLN Net price: 3800 EUR Net price calculated at the exchange rate of 4.2 PLN/EUR (Price may change with larger exchange rate fluctuations)

Condition: used, Double-miter saw RAPID, type DGL 5000 / 500 Requires repair – control system is not functioning Year of manufacture: 1993 Cutting length: 5000 mm Shortest section length: 350 mm Saw blade diameter: 500 mm - Control system is not functioning - Exposed metal parts partially show surface rust Space required (L x W x H): 7200 x 1700 x 1850 mm Weight: 1250 kg We are clearing space Affordable machine – ideal for export Lhodpfxjyxy S Do Aiqsl

Condition: new, Year of construction: 2026, functionality: fully functional, Cutting capacity 90° (rectangular) 460 x 250 mm Lhedpfxoz Drarj Aiqjl Cutting capacity 90° (round) 330 mm Cutting capacity 60° (rectangular) 205 x 200 mm Cutting capacity 60° (round) 205 mm Cutting capacity 45° (rectangular) 305 x 250 mm Cutting capacity 45° (round) 305 mm Adjustable band speed 48/96 m/min (60 Hz) Saw band dimensions 27 x 0.9 x 3960 mm Power consumption 1.5 / 2.2 kW Machine weight 900 / 1060 kg (net/gross) Machine dimensions LxWxH = 2310 x 1070 x 1630 mm

Condition: used, Automatic Hacksaw SILISTRA / BULMAK Type OH 254 Hacksaw with material feed Machine No. 862919 Year of manufacture: 1986 Cutting capacity - Round Ø 250 mm Cutting capacity - Square 250 x 250 mm Stroke rates 40 - 50 - 63 - 80 - 100 - 125 strokes/min. Saw blade length 450 mm Motor power 1.5 and 2.2 kW, pole-switchable Electrical connection 380 Volt, 50 Hz - Straight cutting automatic machine designed exclusively for 90° cuts - Saw motor with 2 speeds and 3 V-belt stages - Saw bow with hydraulic lowering and lifting - Hydraulic cutting pressure adjustment via throttle valve - Length stop via manually adjustable fixed stop (electrical contact stop) approx. 800 mm - Vise feed with electric feed drive using leadscrew for automatic material transport - Hydraulic material clamping with stepless clamping force adjustment - Coolant unit integrated in machine base Ljdpfx Ajwb Hxveiqshl - Electrical control cabinet positioned next to the machine Required floor space (L x W x H): 2000 x 1800 x 1400 mm Weight approx. 900 kg

Condition: new, bending diam. - max. 36.0 mm ST cutting thickness max. 36.0 mm ST motor 1450 U/min oil volume 32.0 l motor 380 Volt 50 Hz total power requirement 5.5 kW weight 650 kg range L-W-H 1470 x 1200 x 1020 mm Exhibition machine - NEW (!!) Equipment: - Maximum performance, minimum consumption - hydraulic combination machine for bending and cutting processes * for e.g. structural steel or solid material - Bending mode with 3x different angle settings - manual and automatic mode selectable - simultaneous bending and cutting processes when the machine is in operation - "ECO mode" = hydraulic pump only runs when the foot switch is pressed - freely movable foot switch - operating instructions technical data: Lhsdpfjxabntex Aiqjl - steel 45 kg / mm² .. bending Ø 36.0 mm / cutting Ø 36.0 mm * for 2x pieces - steel 45 kg / mm² .. bending Ø 20.0 mm / cutting Ø 24.0 mm - steel 65 kg / mm² .. bending Ø 32.0 mm / cutting Ø 32.0 mm * for 2 pieces - steel 65 kg / mm² .. bending Ø 18.0 mm / cutting Ø 20.0 mm - steel 85 kg / mm² .. bending Ø 26.0 mm / cutting Ø 28.0 mm * for 2 pieces - steel 85 kg / mm² .. bending Ø 14.0 mm / cutting Ø 18.0 mm * Machine video: ?v=zagTSA81VyA

Condition: excellent (used), Year of construction: 2010, Used machine in top condition – training machine – Year of manufacture: 2010 Digital display in Y Equipment and technical data Cutting length: 3300 mm Cutting height: 2200 mm (edge trimming height 2110 mm) Cutting depth: max. 60 mm Extraction: Ljdezzfr Eepfx Aiqohl - Saw unit 120 mm - Lath grid 100 mm Workpiece support: - Sturdy plastic support for optimal stability, even for narrow workpieces. Tilting roller transport system: Manual for easy and material-friendly transport Locking: Manual, vertical and horizontal Feed: Manual, vertical and horizontal Circular saw blade: Diameter: 250 mm Saw motor: 4 kW at 5450 rpm, 400 V, 50 Hz Folding guide rail: incl. workpiece support for narrow parts with strip stop Dust extraction system in accordance with BG guidelines TRK (below 2 mg of fine dust / m³ of air) Availability: immediate Location: 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2009, machine/vehicle number: 10000850, Item No. 21166 Hydro-pneumatic metal circular sawing machine Technical data: - Saw blade diameter up to 350 mm - Saw blade feed, continuously adjustable, hydro-pneumatic - Maximum opening width of the pneumatic vise 205 mm - Cutting range: - with saw blade diameter 350 mm - at 90°: - round 120 mm - square 110 mm - flat up to 200 x 90 mm - or 140 x 110 mm Ledpfx Aezzpp Ieiqshl - at 45°: - round 100 mm - flat 100 x 100 mm - Miter adjustable: - left up to 45° - right up to 45° - 30° - 4 saw blade speeds 10 + 20 + 40 + 80 1/min - Drive 400 V / 1.4 / 1.9 kW - Air connection 6 - 8 bar - Micro-spray cooling system - Discharge conveyor with stop 4000 mm - Infeed conveyor 2000 mm - Space requirement approx. W 850 x H 1750 x D 950 mm - Weight approx. 400 kg

Condition: used, Year of construction: 2000, machine/vehicle number: 121528, Item No. 26301 Technical specifications: - Saw blade diameter up to 400 mm - Cutting range with a saw blade diameter of 400 mm - at 90° up to round 130 mm - square 120 mm - flat 305 x 40 mm Lsdszzplijpfx Aiqjhl - or 240 x 85 mm - mitre adjustable, left + right 0 - 90° - at 45° up to round 130 mm - flat 245 x 30 mm - or 180 x 70 mm - Saw blade feed speed - steplessly adjustable 0 - 10 m/min - Saw blade cutting speed 13 / 26 m/min - Saw drive 400 V / 1.7 / 2.6 kW - Hydraulic drive 400 V / 0.75 kW - Hydraulic material clamping device with hand crank for fine adjustment - Steplessly adjustable clamping pressure - 2 hydraulic backstops - Micro-spray coolant system - Original outfeed roller conveyor with stop 4000 mm - Infeed roller conveyor 2000 mm - Space requirement approx. W 900 x H 1800 x D 1050 mm - Weight approx. 950 kg

Condition: good (used), Year of construction: 1989, double-sided processing from 280 to 2500 mm the following equipment is available on each side: saw drilling head with 3 drills dowel inserter 3 drilling units from above, at the front 2 drilling units from above, at the rear Lsdpfx Ajzzprpeiqjhl return transport from below

Condition: new, Year of construction: 2023, SPECIAL PRICE, Stock machine Year 2023, Condition: new List price + option minimal lubrication system LUBETOOL: €15,370 STOCK MACHINE – Fully Automatic Aluminium Circular Saw 90° Cut With easy, safe operation and excellent cutting performance. This machine is only capable of 90° cuts! Technical data: Lhjdpfxsvurgyo Aiqjl ● Cutting capacity: 90° round: 100 mm / square: 100 x 100 mm / rectangular: 170 x 60 mm ● Drive power: 1.9 kW / 400 V / 50 Hz ● Speed: 3,000 rpm ● Feed: Single-stroke feed 300 mm (double stroke up to 600 mm) ● Max. cutting height: 100 mm ● Blade size: 350 x 32 mm Standard features: ● Machine for 90° cuts, equipped with a powerful drive motor ● Clear, large-sized control panel ● Adjustable cut-off length from 5 to 300 mm via handwheel and counter ● Main vice with 3 pneumatic clamping cylinders: 1 horizontal, 2 vertical ● Feed vice with horizontal and vertical pneumatic clamping cylinder ● Large safety guard, fully covering the working area, pneumatically lifted ● Adjustable cutting and feed speed ● Air gun for cleaning the machine ● Connections for extraction system Optional, mounted on stock machine: ● Minimum quantity lubrication system "LUBETOOL" with one pump and pressure regulation

Condition: used, Year of construction: 2001, Technical details: Ljdpfx Aewvbk Ajiqshl saw blade diameter: 250/285 mm cutting diameter: 50-70 mm total power requirement: 5,5 kW weight of the machine ca.: 1 t Saw type: circular saws Cutting direction: straight cut Automation: automatic Material type: structural steels, stainless steels, tool steels Material width: 60 mm Material height: 70 mm *

Condition: excellent (used), METALLKRAFT Profile Steel Shear / Punch HPS 65 DS Combined Hydraulic Profile Steel Shear and Punch with Punching Station, Notching Station, and Flat Steel, Angle Steel, and Profile Steel Shear – enables simultaneous operation at punching and profile steel shear. Punching Station - Punching Force: 65 t - Punching Capacity: max. Ø 26 x 20 / Ø 57 x 10 mm* - Throat Depth: 305 mm - Stroke Length: max. 55 mm - Number of Strokes: 25 strokes/min - Working Height: 900 mm Rod Steel Shear - Cutting Capacity Round: max. Ø 45 mm* - Cutting Capacity Square: max. 45 x 45 mm* Angle Steel Shear - Cutting Capacity L-Profile 90°: 120 x 120 x 12 mm* - Cutting Capacity L-Profile 45°: 70 x 10 mm* - Cutting Capacity U/I Profile: 120 x 58 mm - Cutting Capacity T-Profile: 90 x 11 mm - Working Height: 1,140 mm Flat Steel Shear - Cutting Capacity 90°: max. 300 x 20 / 375 x 15 mm* - Miter Cut 45°: max. FL 100 x 15 mm* - Blade Length: 380 mm - Working Height: 900 mm Notching Station - Material Thickness: max. 10 mm* - Notching Width: max. 45 mm - Notching Depth: max. 90 mm - Notching Station: 100 x 100 x 10 mm Machine Data - Motor Power: 5.5 kW | 400 V - 50 Hz - Dimensions (LxWxH): 1700 x 950 x 1880 mm - Weight (net): approx. 1,600 kg Shipping on pallet via freight forwarder possible Europe-wide. Additional machines available! Take a look at our listings. If you have any questions, feel free to contact us by message or phone: Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg Ljdpfx Aioxizansqjhl

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Vollmer sharpening machine for band saws in a robust design. Blade width up to 360 mm. 2 switchable tooth profiles. Grinding wheel, CBN, 250 mm diameter. Lhsdpfjz Ad R Nsx Aiqsl

Condition: new, Comparable to Emmegi, Elumatec, Pressta-Eisele, Pertici, Fom, etc. 3 NC axes for length as well as electronic tilting of the saw blades outward to 22.5° and inward to 135° Cutting length 5000 mm Processing of single cuts Processing of cutting lists Creation of cutting lists via keyboard Import of cutting lists via USB flash drive or network Ljdpfxownfvto Aiqohl Automatic angle cutting/incremental cut function Processing of extended length cuts Short cuts from 5 mm cutting length Cross cuts Manages label printing with data or barcodes Hydropneumatic saw blade feed, infinitely adjustable Pneumatic safety guards Traveling roller conveyor on the right saw unit with additional clamping cylinder Length positioning with consideration of saw angles and profile height Profile height measurement including length compensation and horizontal clamping cylinder Each saw unit equipped with one horizontal and one vertical clamping cylinder Additional horizontal clamping cylinder on the fixed saw unit, left of the saw blade 1 profile support between the saw units, pneumatically swiveling With two-hand control IPC with Windows Embedded and HMI 15.0” touchscreen Including the following options: Minimal quantity lubrication systems Label printer Network connection for teleservice, 1-year license We also always have suitable extraction systems in stock, including for existing aluminum saws!

Condition: good (used), Mitre and cross-cut saw for aluminium. Swivels left and right up to 45° and tilts up to 45°. Saw blade diameter up to 250 mm. Lhsdpoy N S Hzefx Aiqol

Condition: not inspected (used), Year of construction: 2013, Profile machining center Axis travels X-axis: 7430 mm Y-axis: 1320 mm Z-axis: 500 mm A-axis: +/-90° Working areas X-axis: 7460 mm Y-axis: 650 mm Z-axis: 250 mm 8 clamping elements Automatic tool magazine with 8 positions in a protected housing, for drilling, milling, and threading tools, Ljdpfx Aijvy E Ibsqohl angular heads, and disc milling cutters, max. Ø 200 mm, + 2 positions for 2 angular heads Tool holder: ISO 30 In pendulum operation (2-zone machining), the working stroke per zone is limited to 3500 mm. Special price due to the fact that it has not been inspected!

Condition: used, Year of construction: 1997, total height: 2,400 mm, total length: 1,800 mm, total width: 1,000 mm, Colour: Grey Weight: 1.800 kg - Year: 1997 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AS10384 - Saw direction: vertical - Main motor power [kW]: 15.0 - Wheel diameter [mm]: 920 - Max. cutting to feed roller opening [mm]: 250 - Max. cutting to stop opening [mm]: 300 - Max. cutting width to column [mm]: 300 Lhodpfxozgup Do Aiqjl - Max. total opening [mm]: 3050 - Max. cutting height [mm]: 3450 - Table width [mm]: 790 - Table length [mm]: 740 - Max. band saw width [mm]: 70 - Max. band saw length [mm]: 5600 - Feed roller type: Automatic electric - Extraction port diameter [mm]: 150 - Options: Tiltable fence - Voltage [V]: 400 - Current consumption [A]: 30 - Fuse [A]: 63 - Power [kW]: 15.0 - Transport dimensions: 1800mm x 1000mm x 2400mm (l x w x h) - Transport weight [kg]: 1800kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), functionality: fully functional, Saw motor, pole-changeable: 1.0 / 1.6 kW 6 cutting speeds: Motor stage 1/2: 8, 10, 12.5 m/min and 16, 20, 25 m/min Cutting range at 90 degrees with a blade size of 360 mm: round: 110 mm flat: 200 x 80 mm Lhedpfx Ajzy Egtjiqsl Saw blades: 315 / 360 mm Saw feed: hydraulic Material feed: hydraulic, min. 10 mm Material clamping: hydraulic 2 additional saw blades --> --> Special price: EUR 4,000.00 net, free on board!

Condition: used, Equipment: documentation/manual, RES 420 CUTTING SAW Lodpfx Aszzdt Ueiqohl MAXIMUM CUTTING DIAMETER: 420 MM CUTTING CAPACITY ON THE FRAME: 420 MM

Condition: good (used), Year of construction: 2000, Panel saw with scoring unit 3 m sliding table Length adjustment via display Ljdpfx Aijtw Hd Ajqshl Width adjustment by hand Height adjustment converted to foot-operated hydraulic system with clamping bar for veneer or other materials