Used Amafilter Ss Pressure Leaf Filter – Plc Automatic for sale (45,133)

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit Cjdpfx Adjflpmqerorh • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Condition: used, Year of construction: 2024, Overview The dynamic beer filtration system 1VDCF-5-5 was manufactured in 2024 by the German company BECA. The filtration system is used to filter beer. Techn. Data Whole Plant Crodpfx Adexchy Uerjh - Output: 5 hl/h - Filter surface area: 5 m² - Condition: as new - Weight empty: approx. 800kg (net) + 300 kg (el. cabinet) - Dimensions (L x W x H): 2300mm x 1300mm x 2200mm - Dimensions electrical cabinet: 1000mm x 800mm x 2000mm - Energy requirement: 4kW - Energy consumption: 0,7-1,0 kW/hl - Temperature increase: 5°C per minute due to ceramic plates - Operating pressure: 1-4,5 bar - Size of the pores: 200nm Features: - High quality beers immediately after start up - Higher dry content of the filtered yeast - Extremely low energy consumption - Low maintenance effort - Filtration at low pressure - No additional tools or additives required - Modular design to increase the capacity in future - Integrated CIP system

Condition: used, Year of construction: 2020, Overview The tangential filter was manufactured in 2020 by Spanish manufacturer Sefiltra. It can be visited anytime. The structure is made of AISI-304 stainless steel; it has four wheels and a handle for its wheels and a handle for its displacement. All pipes and accessories are made of AISI-316L, Stainless Steel AISI-316L. The system is operated from the SIEMENS KTP 900 color touch screen, which is located on the front of the electrical panel. Techn. Details Capacity: depending on beer type, recently 1,000 – 1,500 litres per hour Unitary filtration surface: 10 m² Two 0.5 micron hollow fiber membranes Dimensions (LxlXh): 1.800 x 950 x 2.300 mm Weight empty: 350 Kg Operating weight: 470 Kg Equipment 1 pc Centrifugal feed pump 3.0 kW 1 pc Recirculation centrifugal pump 4,0 kW 2 pc Diaphragm HF 6043 MF 05 (KDP3358) 1 pc Modulating valve 5 pcs Pneumatic valves 1 pc 100 L CIP tank 1 pc Angle filter 500 microns 3 pc Electromagnetic flowmeters 5 pc Pressure transmitters 1 pc Temperature transmitter 1 pc Level transmitter 1 pc Liquid detector 1 pc Electrical panel with Siemens S7-1200 programmable logic controller and touch screen Siemens 7" touch screen Crjdeqvvpaspfx Adrsh

Condition: used, System: Chamber filter press, drip-tight, used Application area: Chamber filter press Design: side-bar guided Year of construction: 2002 Filter plate size: 470x470 mm Number of plates: 10 Filter plates: PP Cake thickness: 25 mm Crjdjwqzh Rjpfx Adrsh Filter cloths: optionally available tailored to the medium Discharge: closed Filter area: approx. 3.3 m² Press content: approx. 48 dm³ Filter pressure: approx. 15 bar Plate transport: manual Pump technology: optional Purchase or rental: Inspection of the systems by appointment at our facility. Miscellaneous: Would you like to rent or buy this system? Contact us, we are happy to be at your disposal.

Condition: good (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 4796013, ROTOX CORNER PUTTYING MACHINE EPA-479 For applying putty to the weld seams on PVC window frames. 1 Contour milling unit, PLC and 4-axis CNC control. Pneumatic workpiece clamping for profile heights of 50 to 115 mm and profile widths of 50 to 130 mm. Remote control with screen and PC control. Base machine, profile support, window exterior, bottom. Technical data: Compressed air: 7 bar (filter pressure regulator) Voltage: 240/400V, 50Hz, 1.8kW Dimensions: 6,000x4,700x1,900mm (with WT) Weight: 960kg Year of manufacture: 2000 4 ROTOX-EPA-479-ASES 47241908 Milling unit for visible surfaces (grooves and smooth). Top and bottom. 2 ROTOX-EPA-479-FDV-O/U 47251834 CNC milling unit for sealing plane, vertical, from above and below. 2 ROTOX-EPA-479-AI-R/S-VA 47241928 Milling unit for inner corners with a radius or a bevel, including a vertical milling unit up to 23° to the vertical, from below. 8 ROTOX-EPA-479 NC PROGRAMS GEALAN 47211260 8 ROTOX-EPA-479-NCPROG-COPIES for decorative profiles 47211261 1 ROTOX-EPA-479-PE 47211270 Credpfoz Iynfsx Adreh Profile recognition in the machine (for NC program copies and profile recognition). ROTOX-EPA-479-WT426-RS Turning station ROTOX WT 426 Transport direction: to the right when viewed from the front. Frame size 350x350mm to 2,000x2,000mm, for automatic feeding, turning and further transport of window frames, with support table, drive elements and software. Table size: approx. 4,700x2,500mm

Condition: used, This listing is for the Spectrum Labs Krosflo Research 11 TFF System Cjdpfx Adjxv Axxororh The unit is in full working condition and is ready for immediate use The KrosFlo® Research II TFF System by Spectrum Laboratories is a laboratory-scale filtration system designed for microfiltration and ultrafiltration applications. It is particularly suited for research and development processes involving volumes ranging from 2 mL to 15 L. The system is ideal for biotechnology, pharmaceuticals, and academic research laboratories where precise and controlled filtration processes are required.

Condition: good (used), Plant: Chamber filter press Type: Chamber filter press 470/36 Design: side rail guided Machine no.: 2770 Filter plate format: 470x470 mm Number of plates: 36 Filter plates: PP Cake thickness: 30 mm Drain: open Filter cloths: optionally available to suit the medium Press capacity: approx. 150 dm3 Codpfx Adsqa D A Djrorh Plate pack length: approx. 1730 mm Filter pressure: approx. 15 bar Closing pressure: approx. 380-410 bar Plate transport: manual Pump technology: optional Dimensions L 3500 x W 1000 mm Accessories: Optional - drip plates, ram extension and plate package can be extended Hydraulic unit: AC motors 1.1 KW Purchase or hire: Viewings of the systems by arrangement at our factory

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel Crsdefz A D Nepfx Adreh • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology Crsdpofz Dvvofx Adrsh User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Condition: used, Netsch Membrane Chamber Filter Press Format: 1200x1200 Number of plates: max. 100 Plate material: PP Filter area after expansion: 142 m2 Csdpfx Aozvahwedrorh Press volume after expansion: 1980 l Cake thickness: 30 mm Dimensions: L 11182 mm x W 2580 mm x H approx. 4100 mm Weight: 25800 kg

Condition: used, Oil filter system, oil cleaning system, oil transfer system, hydraulic unit, hydraulic pump, hydraulic pump, hydraulic test pump -Operating pressure: max. 420 bar Cedped Scprsfx Adrjrh -Dimensions: 140/68/H245 mm -Weight: 2.3 kg

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 1,200 mm, pressure: 5 bar, total width: 1,800 mm, operating pressure: 4 bar, Now offering a new treating plant with a fully automatic door type IWT-Moldrup Timber Impregnation Plant – Ø1,800 × 12,000 mm Industrial pressure impregnation plant for the treatment of timber. The plant will be manufactured following an order and configured to suit the buyer’s treatment process and production requirements. Industrial Timber Impregnation Plant – Ø1,800 × 12,000 mm The plant is built around a pressure vessel measuring Ø1,800 mm in diameter and 12,000 mm in length. The specification can be tailored to the required preservative, timber dimensions, treatment cycles and level of automation. We offer to supply both autoclave alone and complete treating plant incl. pumpskid, storage tank etc. Depending on the agreed scope of supply, the installation can include preservative storage and working tanks, vacuum and pressure pumps, process piping and valves, timber loading equipment, safety systems and PLC-based controls. Cjdpfx Adez Eg Nqsrjrh We can supply the plant with process automation and provide supervision during installation and commissioning, as agreed in the written contract. This is an offer for a newly manufactured plant. The equipment shown or described is not an existing plant available for immediate delivery. Final technical specifications, scope of supply, price and delivery time will be confirmed in our quotation. We also offer other diameters and lengths upon request. Please contact us with your treatment requirements for a detailed proposal.

Condition: ready for operation (used), Year of construction: 2021, operating hours: 288 h, functionality: fully functional, total height: 2,100 mm, total width: 1,200 mm, total length: 4,400 mm, overall weight: 1,800 kg, production capacity: 1,350 unit/h, No minimum price – guaranteed sale to the highest bidder! Automatic, linear, electro-pneumatic counter-pressure filling and capping system + rinser, infeed conveyor, and automatic labeling machine from the manufacturer ENOS! The machine is being sold due to a changeover to aluminum cans. The system is fully operational and has been internally maintained according to the manufacturer's instructions. Note: The seller will handle the dismantling of the machine. The buyer is only responsible for loading the machine for transport. TECHNICAL DETAILS Production capacity: 1,350 units/hour Bottle format: 33cl long neck, crown cap 26mm With the same diameter of 60.4 mm, various bottles are possible (automatic height adjustment) MACHINE DETAILS Usage: 282,000 bottles filled Operating time: 288 filling hours Input voltage: 400 V Operating pressure: 8 bar Cedezh Dtbepfx Adrorh Input frequency: 50 Hz Type of input current: Three-phase Dimensions & Weight Dimensions (L x W x H): 4,400 x 1,200 x 2,100 mm Total weight: 1,800 kg EQUIPMENT Rinser Infeed conveyor Automatic labeling machine

Year of construction: 1999, operating hours: 76,000 h, condition: used, functionality: unexamined, Technical parameters: Cjdpfx Adey D Hy Ejrjrh • Manufacturer: AUSTRIAN ENERGY • Type: Dual pressure drum boiler (1999) • HP steam flow: t/h 40.8 • LP steam flow: t/h 17.3 • HP steam parameters: bar/°C 52 / 425 • LP steam parameters: bar/°C 4.2 / 180 • Flue gas temperature at HRSG outlet: °C 80 • Flue gas stream to the stack: t/h 468, k Nm3/h 482 • Heat recovered by the steam and water cycle from flue gas in HRSG: MWt 45.9 • Maximum output of DH exchanger: MWt 8.0 • Operating hours: 76,000 hours The high- and low-pressure sections of the equipment and the drums (HP and LP) consist of 6 independent, transportable modules. The boiler wall insulation is partial and requires replacement.

Condition: excellent (used), mileage: 207,559 km, power: 315 kW (428.28 HP), first registration: 12/2011, fuel type: diesel, axle configuration: 6x4, wheelbase: 5,720 mm, fuel: diesel, fuel tank capacity: 15,000 l, color: other, driver cabin: day cab, gearing type: automatic, emission class: euro5, total length: 9,000 mm, total width: 2,500 mm, Year of construction: 2011, = Additional options and accessories = - PTO = Remarks = Credsymrfkjpfx Adroh Wiedemann Reichhardt 15m³ kolkenzuiger (type: 12.0/2.5 - 320) - bovenzijde, links- en rechtsverschuifbaar (zuigslang Ø200 mm) - Hogedrukslanghaspel achterzijde (120 meter hogedrukslang Ø19 mm) - Capaciteit: 3.000 m³ per uur - Speck Hogedrukwaterpomp (type: P45-75 180) - Achterwaarts kippende opbouw met hydraulische bediening - Extra inspectieluiken op slibtank voor reiniging en onderhoud - Welvaartsweegsysteem (type: Delta 30) - Radiografische afstandsbediening = More information = Technical information Number of cylinders: 6 Engine capacity: 12.780 cc Axle configuration Front axle: Steering Rear axle 1: Double wheels Rear axle 2: Double wheels; Steering Weights Empty weight: 16.700 kg Carrying capacity: 15.300 kg GVW: 32.000 kg Condition Technical condition: very good Visual appearance: very good Financial information Price: On request Identification Registration number: BZ-RB-28 = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: new, Accessories + spare parts for all filter presses in all sizes and qualities, short delivery times, ask us Credpfxjikl Ufo Adroh Location is 58762 Altena

Condition: used, mileage: 206,700 km, power: 205 kW (278.72 HP), first registration: 08/2005, fuel type: diesel, tire size: 315/80 R 22.5, axle configuration: 6x2, wheelbase: 5,550 mm, fuel: diesel, driver cabin: day cab, gearing type: mechanical, emission class: euro3, suspension: steel-air, total length: 9,080 mm, total width: 2,480 mm, Year of construction: 2005, Equipment: ABS, air conditioning, electric window regulation, = Additional Options and Accessories = - 6x2 - Digital tachograph - Lift axle - Air suspension - PTO - Radio/CD player - Sun visor = Additional Information = Technical Information Number of cylinders: 6 Engine displacement: 6,374 cc Axle Configuration Tire size: 315/80 R 22.5 Front axle: Steered; Tire tread depth left: 30%; Tire tread depth right: 30%; Suspension: Leaf spring suspension Cjdpfozy I Tiox Adrorh Rear axle 1: Dual tires; Tire tread depth left inner: 40%; Tire tread depth left outer: 40%; Tire tread depth right inner: 40%; Tire tread depth right outer: 40%; Reduction: single reduction; Suspension: Air suspension Rear axle 2: Tire tread depth left: 25%; Tire tread depth right: 25%; Suspension: Air suspension Weights Unladen weight: 15,040 kg Payload: 11,960 kg GVWR: 27,000 kg Condition Damage: none

Condition: new, Year of construction: 2025, Cartridge filter housing – 3 × 30″ – SUS304 Cartridges 3 Cartridge length (inch) 30 Material SUS304 The inch value refers to cartridge length, not overall housing height. Connections, seals, operating pressure and temperature must be confirmed for the selected version. Codpfx Adjz Iaynjrorh Image [1] [1]

Condition: used, Year of construction: 2017, machine/vehicle number: 472447, LEIBINGER TRANSVASA 12/6 EK – monobloc counter-pressure bottle emptying / transfer machine for carbonated beverages in glass bottles IDENTIFICATION - Manufacturer: LEIBINGER - Model: TRANSVASA 12/6 EK - Year of manufacture: 2017 - Serial/order number: 472447 - Previous application: cider FUNCTION AND OUTPUT - 12 emptying valves - Counter-pressure emptying with long-tube technology - 6 decapping stations - Direction of operation: clockwise - Nominal output: 2,500 bottles/h for 0.75 l bottles - Adjustable range: 560–2,800 bottles/h Codpfx Asz Icc Sodrsrh - Designed for carbonated beverages, e.g. traditionally produced cider - Automatic removal and collection of pierced bottle closures - Integrated through conveyor PRODUCT AND UTILITY DATA - Maximum product temperature: 20 °C - Compressed air: 6 bar; connection R 1/2" - CO₂ product pressure: 8 bar; gas connection R 1/2" - Product outlet: DN 40 - Gas discharge: DN 40 - Buffer tank: 100 l nominal volume according to the order confirmation; 108 l according to the rating plate - Product pump: stainless-steel rotary lobe pump, material 316L - Conveyor height: 1,000 mm ± 50 mm ELECTRICAL DATA - Operating voltage: 400 V - Control voltage: 24 V DC - Frequency: 50 Hz - Main drive: max. 0.75 kW MATERIALS AND DESIGN - Product-contact parts mainly made of stainless steel 316Ti and 316L - Main pipework made of stainless steel 316L - Emptying tubes made of stainless steel 304 - Food-grade plastics, e.g. POM and PTFE - Food-grade elastomers, e.g. EPDM - Hygienic tubular frame design without horizontal collection surfaces - Frameless Makrolon safety guarding with interlocked doors and removable covers - CIP connections - Mechanical lifting pistons press the bottles against the emptying valves - Bottle-presence monitoring at the infeed and jam monitoring at the discharge - Central safety clutch - Height-adjustable machine feet - CE-compliant design at the time of delivery ACCESSORIES AND DOCUMENTED BOTTLE FORMATS - SOWEC SO filter, year 2017 - Order confirmation: guide parts for one bottle format included - Lightweight 75 cl cider bottle: height 290 ± 1.8 mm, body diameter 82.8 ± 1.5 mm, 29 mm crown finish, approximate brimful capacity 78.5 cl, approximate glass weight 540 g - Méthode Traditionnelle 75 cl bottle, model 1164/320: height 300 ± 1.8 mm, body diameter 85.9 ± 1.5 mm, 29 mm crown finish, filling capacity 750 ± 10 cm³ at 72 mm, approximate glass weight 775 g, maximum carbonation 5.0 volumes CO₂ The original order confirmation, operating manual and bottle data sheets are available. The completeness and condition of the format parts and accessories currently present must be verified before use.

Condition: used, Year of construction: 2007, Attachment: Chamber filter press, used Type: Passavant Year of manufacture: 2007 Application: Sludge dewatering Filter plate format: 1500x2000 Number of plates: approx. 58 Filter plates: PP Crjdpfx Aozk E H Iedrsh Filter cloths: available as an option, tailored to the medium Filter area: approx. 286 m2 Press volume: approx. 4660 dm3 Filter pressure: approx. 15 bar Total weight: 32,900 kg Application: Sludge treatment, dewatering system. Filter presses are pressure filters that operate in a batch process for the solid-liquid separation of suspensions. Purchase or rental: Rental or purchase. Inspection of the equipment can be arranged at our facility.

Condition: ready for operation (used), System: Netzsch 800 /80 sidebar Size of plate: 800 x 800 mm Chambers: 80 Filterplates: Polypropylene Filter cloths: as an option Outlet: open Filter surface: approx. 88,48 m² Volume of filtercake: approx. 1272 dm³ Working length: approx. 4656 mm Filter pressure: 15 bar Closing pressure: Min. 380 bar, max. 410 bar Plate closure: electro hydraulic Plate transport: manual Dimensions: LxBxH approx. 5300 x0900 x 1040 mm Weight filterpress: approx. 4 t Underframe: available from stock as optional accessories Dimensions: LxBxH 8000 x 1050 x 2020 mm Weight: approx. 5 t Control cabinet: yes Pumps: as an option Accessories: mixing tank optionally available as a special accessory 3.00x1.50x2.20 m Special services: Refurbished service to customer optional. The system goes through a pre-delivery service check or a complete overhaul. Rent or Buy: Machine can be inspected at our factory Cjdpfxod E Dgks Adrsrh We can offer Spare Parts, Accessories and Service for your Chamber Filter Press - Rittershaus & Blecher, Netzsch and more Filter Press Brands.

Condition: new, Year of construction: 2024, functionality: fully functional, operating pressure: 250 bar, total length: 607 mm, high-pressure hose length: 10,000 mm, total height: 1,063 mm, total width: 518 mm, type of input current: three-phase, empty load weight: 70 kg, input voltage: 400 V, warranty duration: 24 months, Technical Specification Voltage: 3 / 376–424 V / 50 Hz Working Pressure: 80–250 bar Flow Rate: 500–1000 l/h Crodpfx Adjw Iduteroh Inlet Water Temperature: 60°C Connected Load: 8.8 kW Nozzle Size: 047 Colour: Anthracite Weight with Accessories: 70.3 kg Weight with Packaging: 78.55 kg Dimensions (L x W x H): 607 x 518 x 1063 mm The compact, vertical design is made possible by the vertically mounted motor and pump. Compact dimensions facilitate storage. Manoeuvrable and easy to transport. Stable during operation. 4-pole, low-speed motor cooled by water and air; reliable stainless steel piston pump and brass cylinder head Long service life and economical maintenance. High performance and efficiency. Water suction function for water temperatures up to 60°C. Ergonomic Vibrasoft rotary nozzle Reduces vibrations by up to 30%. Reduces noise level and intensity. Rotary nozzle provides support for demanding cleaning tasks. Smart service design speeds up on-site maintenance Rotatable pump head. Convenient oil level indicator and integrated oil drain in the device housing. Modular design comprising pump, motor, and control cabinet. Support systems and LED display Integrated electronic control system. Automatic shut-off in case of network overload. Automatic shut-off in case of phase loss or leakage from the device. Comprehensive range of accessories with EASY!Lock technology Pressure and water volume can be adjusted via the Servo Control regulator located between the lance and the trigger gun. The EASY!Force Advanced trigger gun allows effortless operation. Rotary lance made of stainless steel, 1050 mm in length. Wide range of additional accessories Storage compartment. Adjustable hooks, e.g. for storing a second lance or power cable. High-pressure hose storage compartment.

Condition: good (used), Automatic cloth rewinder for offset printing machines Manufacturer: Vliesstoff Kasper Very good condition. 380V power supply, foot pedal control Device suitable for B1 and B2 format machines Cedpfx Adezuryierjrh

Condition: good (used), IML DA 900 Rigid Box Automatic Wrapping Machine This machine is practically new. Year of manufacture: 2016. Application: Wrapping veneer on a box. Made in Italy. This automated machine is designed for forming solid board boxes by wrapping veneer on a solid board box. This is the latest version of the machine, with a PLC controller. Technical specifications: Max size: 430mm x 350mm x 120mm Min size: 60mm x 60mm x 10mm Version thickness: 100-175gsm Crsdpfx Aezw Ty Nsdreh Weight: 900kg Power supply: 230V The set includes two tool palettes for producing standard boxes. The molds are primarily made using 3D printing technology.

Condition: used, Year of construction: 2003, Overview This PALL Microflow filtration system is designed for the crossflow filtration of beer, enabling continuous and fully automated clarification processes. The system is configured as a tandem installation with a capacity of up to 50 hl/h, suitable for medium to high-capacity brewery operations. It operates with membrane filtration modules, allowing gentle product handling and stable filtration performance. The unit includes pumps, integrated CIP system, and Siemens-based automation, ensuring a high degree of process control and hygiene. Technical Specs  - Capacity: approx. 50 hl/h (tandem system, 24h operation) - Filtration type: Crossflow (microfiltration) - Number of modules: 48 - Operating temperature range: 0°C to 70°C Cjdpfx Adsy Etcpersrh - Equipment: Pumps, integrated CIP system, complete piping, control system - Control system: Siemens S7 with Siemens OP07 HMI - Automation level: Fully automatic Equipment  - Filtration modules (48 units) - Product pumps - Integrated CIP system - Complete piping system