Used Amazone Za-Ts Hydro 3200 Super for sale (8,089)

Condition: used, Year of construction: 2023, Spreading disc set V-Set 1 3-way unit Boundary spreading unit Limiter V / pipe protection bracket S Rolling device pluggable Spreading unit ZA-V Hopper attachment S / 2000 PTO shaft with friction clutch Built-in parts for ZA basic units Mud flap S / LED lighting Gujdst Dwh Ropfx Acash

Condition: used, Year of construction: 2023, 3-way unit Boundary spreading system Limiter V Pipe protection bracket L Mechanical / position indicator Spreader ZA-V hopper extension S 2000 Built-in parts for / ZA basic units PTO shaft with friction clutch Strainer L and ladders / LED lighting to the rear Guodst Dwibopfx Acajh

Condition: like new (used), Year of construction: 2004, WEINIG UNIMAT SUPER 4 planer – German production - very good condition – year of production 2004 – DTR TECHNICAL PARAMETERS: planing width 150 mm planing height 50 mm spindle diameter 40 mm equipped with tools upper adjustable head 1) lower head 11 kW 6000 rpm 2) upper head 18.5 kW 7000 rpm 3) lower head 5.5 kW 6000 rpm feed motor 2.2 kW feed adjustable on the inverter 0-18 m/min feed on cardan shafts pneumatic clamp three upper steel-plated pulling rollers one rubber top roller grooved top pre-top length 1950 mm Godpoin Nrgofx Acaeuh total power 37 kW central lubrication Transport dimensions: length/width/height 320x220x220 cm weight ~ 2700 kg

Year of construction: 2003, condition: used, Technical data: - Manufacturer: Weinig - Type: Unimat Super 4 - Year of manufacture: 2003 - Working width: 25 - 150 mm - Working height: 15 - 50 mm- Shaft arrangement: Spindle 1 below: Planing and milling the guide groove 125x40x40 mm, Z=2 125x120x40 mm, Z=2 Spindle 2 above: Combination tool consisting of special planing head with guide groove and 2 flat milling cutters. Precise thickness planing and flat milling of the gluing surfaces on the right and left. Face milling cutter on the right: 240x17x40mm, Z=8 Special planing head: 125x240x40mm, Z=4 Face milling cutter on the left: 240x80x122mm, Z=8 Tool flight circles 125 and 250mm Spindle 3 below: Removing the guide groove and finish planing. 125x170x40mm, Z=4 - Spindle 1: 11 KW - Spindle 2: 18.5 KW - Spindle 3: 5.5 KW - Feed engine: 2.2 KW - Feedspeed: 5-20 m/min. Gsdpsyatffofx Acaouh - Speed spindle 1 and 3: 6.000 rpm. - Speed spindle 2: 7.000 rpm. - Transport rollers D (hardened): 140 mm - Length of infeed table: 2.000 mm - Hardened machine tables - Guide groove in machine table - Suction nozzles 2x140 mm, 1x160 mm - Volume flow: approx. 5,500 m³/h - Volts/Hz: 400/50 - Location: Blomberg warehouse from 01/2026

Condition: used, Year of construction: 2007, functionality: fully functional, working width: 150 mm, planing height: 50 mm, spindle diameter: 40 mm, planing width: 150 mm, working height: 50 mm, - after technical inspection - German manufacture - year of manufacture: 2007 - equipped with Weinig EM 15 belt feeder TECHNICAL PARAMETERS: - planing width: 150 mm - planing height: 50 mm - spindle diameter: 40 mm - first bottom head: 11 kW at 6000 rpm - second top head: 22 kW at 7000 rpm - third bottom head: 5.5 kW at 6000 rpm - feed motor: 2.2 kW Guodpfjw E I Ruex Acash - feed speed adjustable via inverter - feed via cardan shafts - four upper steel feed rollers - one upper rubber outfeed roller - grooved table surface - infeed table length: 1000 mm - automatic central lubrication - feeding table length: 4700 mm - feed speed adjustable via inverter - hydraulic pressure rollers - total feeder power: 2.25 kW - machine dimensions (L/W/H): 790 x 200 x 190 cm - weight: 3200 kg

Condition: used, Year of construction: 2019, 2 Vogelsang distributors with 36 outlets, toothed discs, 4 support wheels 15.0/50-17, air brake, K 80 lower hitch, automatic central lubrication, 580 mm wedge ring roller with toothed profile, lighting + warning signs, work lights, tires 710/50R26.5. Guedez Sbygepfx Acajh

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Water-cooled, pneumatic spot welding tong Nimak L193 TB. Very good used condition, fully functional. Item located in 75053 Gondelsheim. See photos. Shipping by forwarding agent or collection. Guedpfxoxmuyps Acaoh

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Water-cooled, pneumatically operated spot welding tongs Nimak L123 Very good used condition, fully functional. Gedjxmuyvopfx Acajuh Item location is 75053 Gondelsheim See pictures Shipping via freight forwarder or collection

Condition: good (used), 3-row Planting wheels with 8 large planting spoons 3 rubber planting discs Distance in the rows adjustable with the correct gears: 26, 29, 34, 40, 45, 52, 68 cm The gripper is opened automatically and is closed by light manual pressure when the plant is pressed onto the gripper. The rotation of the planting disc transports the plant downward inside the coulter. The gripper then automatically releases the plant into the soil in front of the press wheels. The operation is completed by the V-shaped inclined press wheels, which firmly press the soil around the roots to ensure efficient plant growth. More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. See all the available machines at our website. Guedpfjz Rgfqsx Acash Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery

Condition: good (used), Width-adjustable elements Row distance 50 cm More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. Guedpfx Aoz Rflvocajh See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery

Condition: used, Year of construction: 2014, working width: 6,000 mm, - 2-circuit braking system - Tires: 700/40-22.5 - Row marker - 12 rows - 50 cm row spacing - Optical sensor for metering drum for maize, D=5.5, and additional metering drum for maize, D=4.5 - Transport box for metering drums - Electric coulter pressure adjustment - Furrow opener - Remote control for fertilizer quantity - Weighing system - On-board computer Amatron 3 - Passage/single-row mode for 12 rows - Electric scraper adjustment - Track loosening device - Deflector plates for metering - Scraper for support roller - Depth control chain for fertilizer coulter Gedpfjz Na Emjx Acaeuh - Clod breaker - Type approval for 40 km/h - Lighting

Condition: excellent (used), a complete robotic cell. Gujdpfxsznla Nj Acaoh

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: ASS.NO.330165301, turning length: 1,017 mm, turning diameter: 420 mm, total height: 2,840 mm, total length: 5,500 mm, total width: 2,800 mm, overall weight: 7,400 kg, bar passage: 70 mm, number of driven tool stations in tool turret 1: 12, MAZAK SUPER QUICK TURN 300 M CNC lathe Note: Technical data is provided without guarantee. - Swing diameter: approx. 620 mm - Max. turning diameter: approx. 420 mm - Max. turning length: up to approx. 1017 mm - Bar capacity: presumably 70 mm - Diameter of the three-jaw chuck: 250 mm - Number of powered tool stations: 12 - Includes technical documentation - Includes machine accessories such as tool holders, some powered, chuck jaws, and other accessories Gsdsz Nwapjpfx Acasuh Transport will be carried out on a standard truck. FCA D-01445 Radebeul - loaded onto truck.

Condition: used, Year of construction: 2023, working width: 3,000 mm, - Year of manufacture CombiDisc: 2025 - Year of manufacture Cataya: 2023 - Transport width: 3 m - Transport height: 1.56 m - Overall length: 1.87 m - Number of discs: 2 x 12 m - Disc thickness: 4 mm - Disc diameter: 410 mm - Cutting angle: 1st row of discs: 14° / 2nd row of discs: 12° - Working depth: 3 - 8 cm - Working speed: 8 - 15 km/h - Power requirement from / to: 59 kW / 80 hp to 205 kW / 280 hp - Basic unit with integrated QuickLink quick-coupling system - 3-point linkage Cat. 2 or Cat. 3 - Pivoting disc assembly with manual adjustment of the working depth - Maintenance-free stone protection via rubber suspension elements - Adjustable disc carriers for the tractor track and the edge area - Maintenance-free disc bearing with sliding seal - Two adjustable side plates - Operating manual - Finely toothed disc assembly - Hydraulic depth adjustment - Mounting frame for row loosening - Spring-mounted tractor track loosener - Three-point extension 150 mm - Cat. 3 - Front lighting for road use - Electric metering drive 3000 left - Electric calibration with calibration button - Rear lighting for road travel - Front lighting for road use - 24 RoTeC shares for Cataya 3000 Special - Depth guide roller Control 25 - Manual share pressure adjustment Gujdpfsz Na Uzex Acash - Hydraulic top link (short) - Exaktstriegel 3000-125 - Mounting kit Exaktstriegel adjustable - Amadrill 2 - International radar sensor - Mounting kit radar sensor - Analog work position sensor

Condition: new, The Newpower Generator proudly presents their new NWK250 250kVA Soundproof Plus series. These generator sets are equipped with extra sound curtains in the cabins, which guarantee a 15 percent reduction in noise levels compared to the standard series. The unit is new, complete including control, diesel tank, exhaust batteries, electronic speed controller, AVR, battery charger, cooling water heater, sockets, FI protection circuit breaker. - Reinforced soundproofing - Extra quiet operation - Grid monitoring, grid feed-in - Ready for immediate use Technical specifications: Model: NWK250 Soundproof Plus backup generator Fawde Motor Newpower generator set with extra soundproofing Engine : Fawde CA6DL2-27D , 6 cylinder, water cooled Generator: Newpower NW/N80 Continuous power: 180 kW / 225 kVA Gjdpfx Acsnfva Ijaouh Maximum power: 198 kW / 248 kVA Noise level (7m): 67 dB Connection: 1x5P 125A-,1x5P 63A-, 1x5P 32A-, 2x2P 16A Schuko sockets, FI protection circuit breaker- 5-wire cable Frequency : 50Hz Voltage: 400/230V RPM : 1500 rpm. Control: Comap IL4 AMF8 Year of construction: 2023 (new) Dimensions (LxWxH) : 3870X1380X2450 mm Weight: 3650 kg Diesel tank: 400 L. (possibility to connect to an external tank) 100% load l/h 41 75% load l/h 33 50% load l/h 21 additional costs 100A automatic switch: € 620 250A automatic transfer switch Shipment: - Worldwide transport including unloading is possible for an extra charge - In order to be able to quote an exact freight price, please send us a request with your data and your complete address

Condition: like new (used), Year of construction: 2025, Like new, fully functional. Gjdpfxjzvfmro Acasuh

Condition: excellent (used), CATALOGUE NUMBER 7221 TECHNICAL DATA - min / max width of the workpiece 45 / 150mm - min / max height of the workpiece 15 / 50mm 3 spindles: 1) horizontal lower 11kW 2) horizontal upper 22kW (7000 rpm) 3) horizontal lower 5.5kW spindle diameter 40mm - spindle 1 and 3, manual adjustment up/down, left/right - spindle 2, manual adjustment left/right - spindle 2, electric adjustment up/down - spindles 2 and 3 are equipped with brakes from above: - 3 feed rollers, pulling, metal toothed - 1 double output roller, pulling, rubber from below: - feed pressure roller - ribbed table - pulling roller, metal, smooth - electric adjustment of planing thickness Gjdszxq I Hspfx Acaeuh - stepless adjustment of feed speed 6-24m/min - feed motor 3kW - feed on Cardan shafts - length of the feed table 1970mm - automatic lubrication system for the table - diameter of the dust extraction outlet 1x150mm, 2x140mm - dimensions L/W/H 3070x2000x1800mm - weight 2000kg ADVANTAGES – German production – with 3 heads – for processing slats – ribbed table – heads included – unpainted – very good condition – used planer Net price: 115900 PLN Net price: 26960 EUR Net price calculated at an exchange rate of 4.30 PLN/EUR (price may change in case of significant exchange rate fluctuations)

Condition: excellent (used), MDS Type: MDS A220-PD MDS A220-PD Manual Assembly Station The A220-PD assembly system is a stationary manual assembly station for processing press-fit components. Intended use: The machine is used for press-fitting connecting elements. The operator manually places the corresponding screws, plastic nuts, and the component to be processed into the machine. The operator then starts the press-fitting process using a foot switch. The press-fitting process runs automatically. Connecting elements: Press-fit nut, rivet nut, self-piercing nut, press-fit pin, punching pin/rivet pin Thread size: M5, M6, M8, M10, M12 Technical data: Control voltage: 230V/10A Connection plug: HAN 10, not wired Temperature ranges: Transport: -20°C to +60°C Operation: +10°C to +40°C Storage: -20°C to +50°C Compressed air connection: Gjdpfx Acjzgr I Roajuh Operating pressure: 6 bar Quality: Treated, water-free, and oil-free air Connection: 1/2" connection thread Machine dimensions: Length (L): approx. 824 mm / Height (H): approx. 1800 mm / Width (B): approx. 600 mm Values apply to a working height (AH) of 1000 mm. Pneumatics: Standard: Manufacturer SMC Variant: Manufacturer FESTO Control: Standard: Manufacturer B & R Variant: Manufacturer Siemens Machine type: C-frame A220-PD Continuous sound pressure level (LpA): 78 dB Operating modes: The operating modes can be changed in the control panel. Automatic mode: The press-fitting of the connecting elements takes place in automatic mode. Movements are only initiated when the operator presses the foot pedal and thus triggers the press-fitting process. Manual mode: In manual mode, adjustments are made to the machine. In this operating mode, movements can be activated individually. Weight: Approx. 600 kg Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, Year of construction: 2025, working width: 6,000 mm, - Single-chamber container, 3600 l - Quick emptying system - LED lighting for road transport - Chassis swing arm - Short telescopic drawbar Guedpfoz Na I Uox Acaoh - Towing hitch, Cat. 3 - Axles with dual-line pneumatic braking system (40 km/h) - Tire packer with 12 matrix tires - Single-shoot distribution, 1-1 - Segment distribution head with 24 outlets - Row unit segment - Row spacing 2x3 - Row width 2.0 m - Electric half-side control - 48 TwinTeC plus coulters - Comfort hydraulics - ISOBUS - Metering roller, 350 ccm - Metering roller, 660 ccm - Scraper - LED work lights - Hydraulic filter - Suction protection grid - Blower drive with hydraulic motor, 8.2 ccm - Depth control roller, Control plus 50 - Scraper for depth control roller, Control plus - Electronic remote adjustment of coulter pressure - Tillage set - Tire packer, external - Tire packer, internal - Disc 460, finely toothed - Disc carrier with row loosening - Stone deflector - Comfort package with TwinTerminal 3.0 - Radar sensor, international version - Type approval - Security system to prevent unauthorized use for lower link hitch - Safety chain

Condition: excellent (used), Year of construction: 2021, operating hours: 700 h, functionality: fully functional, cutting width (max.): 3,200 mm, table height: 800 mm, overall weight: 1,610 kg, total width: 4,000 mm, total height: 800 mm, total length: 7,000 mm, table width: 3,200 mm, table length: 3,200 mm, Equipment: safety light barrier, Are you looking for a Zund cutting table in perfect condition? Due to changes in our production processes, we are offering our exceptionally young and fully equipped Zünd G3 3XL-3200 for sale. Featuring a massive working area of 3200 mm x 3200 mm, this machine is the ultimate production tool for processing wide-format textiles and XXL flatbed materials. With only 700 production hours on the clock, the system is in absolute mint condition. Equipped with an extended table and a professional unwinding system, this setup is fully optimized for a highly efficient, continuous, and tension-free roll-fed workflow. Key Specifications & Configuration: • Working Area: 3200 mm x 3200 mm (3XL-3200) – Accommodates materials up to 3.2 meters wide! • Extended Table: Ideal for seamless material advance, easy weeding/offloading, and uninterrupted production. • Unwinding System (Roll Feed): Industrial textile unwinder ensuring perfectly tension-free and straight material feeding directly from the roll. • Software: Includes Zünd Cut Center (ZCC) software license. Included Modules and High-End Tools: Gjdpez Inc Rsfx Acaeuh • DRT (Driven Rotary Tool): Driven rotary tool specifically designed for reliable, fast, and wrinkle-free cutting of various textiles (such as banner material, polyester, canvas, and mesh). • Registration System: Integrated camera system for precise registration mark recognition and automatic contour compensation. Machine Condition: The machine is in absolute mint condition and has only operated in a clean production environment. It has been fully maintained according to factory guidelines. The Zünd is currently still installed under power and can be demonstrated fully operational for serious inquiries. Decommissioning, transport, and installation are at the buyer's expense and risk (assistance in contacting certified Zünd technicians can be provided).

Condition: used, Year of construction: 2005, functionality: fully functional, KIATURN 15N SLANT BED CNC LATHE 170 MM HYD 3 JAW CHUCK MAX TURNING DIA 250 MM BAR CAPACITY 38.1 12 STATION TURRET TAILSTOCK FANUC CONTROL TOOL SETTER Gusdpfx Acoz Rnwboaeh PARTS CATCHER BARFEED

Condition: used, Year of construction: 2015, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 400 V, input frequency: 55 Hz, type of input current: three-phase, pressing force: 160 t, stroke length: 200 mm, table width: 200 mm, table length: 3,200 mm, throat depth: 320 mm, clearance between the columns: 2,530 mm, retraction force: 160 t, oil tank capacity: 200 l, total length: 3,280 mm, total width: 2,700 mm, total height: 2,000 mm, overall weight: 11,500 kg, Equipment: CE marking, documentation/manual, We offer a used Metal Technics 3200/160 E200 press brake, manufactured in 2015. The press is currently in operation in a production environment. It operates in an intermittent cycle, in a single-shift mode – 8 hours. Oil is changed regularly. Equipment: PRESS BRAKE Model: 3200/160 E200 Serial number: 48342 Year of manufacture: 2015 Gsdpfx Asy Um S Nocaeuh Motor power: 11 kW Weight: 11500 kg Includes tooling (punches and rotating die). Punch mounting type: Amada. Equipped with light curtains and two backstops. If you have any questions or require additional information, please send a message or contact us by phone.

Condition: used, Year of construction: 1992, functionality: fully functional, machine/vehicle number: 101353-U, turning diameter over cross slide: 370 mm, turning length: 305 mm, turning diameter: 230 mm, spindle bore: 52 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 35 rpm, travel distance X-axis: 160 mm, travel distance Z-axis: 360 mm, spindle motor power: 11,000 W, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (min.): 35 rpm, rotational speed (max.): 5,000 rpm, total height: 1,900 mm, total length: 2,500 mm, total width: 1,500 mm, feed length X-axis: 160 mm, feed length Z-axis: 360 mm, quill travel distance: 275 mm, quill diameter: 55 mm, quill stroke: 75 mm, swing diameter over cross slide: 370 mm, feed rate X-axis: 30 m/min, feed rate Z-axis: 30 m/min, turning diameter over bed slide: 435 mm, turning diameter over top slide: 370 mm, type of input current: three-phase, torque: 96 Nm, overall weight: 2,800 kg, swing diameter over bed slide: 435 mm, bar passage: 42 mm, chuck outer diameter: 144 mm, swing diameter over top slide: 370 mm, center width: 500 mm, center height over cross slide: 185 mm, spindle nose: A2-5", center height: 218 mm, center height in crank: 218 mm, bar diameter (max.): 42 mm, collet bore: 42 mm, travel distance cross slide: 160 mm, Equipment: rotational speed infinitely variable, Mazak Super Quick Turn 10M (SQT-10M) CNC Lathe For sale is a Mazak Super Quick Turn 10M (SQT-10M) CNC lathe from our own machine inventory. The machine comes from an active production environment and is suitable for precise CNC turning operations. The M-version with powered tools offers additional milling and drilling functions. The existing C-axis enables targeted positioning of the main spindle for additional machining operations. An inspection and testing of the machine is possible after prior appointment at our location in 93073 Neutraubling. Machine data: - Manufacturer: Yamazaki / Mazak - Type: Super Quick Turn 10M - Model: SQT-10M - Year of manufacture: 01/1992 - Serial number: 101353-U - Machine weight: approx. 2,800 kg - CNC lathe - Tool turret - Powered tools / Milling function - C-axis function - Coolant system - Enclosed work area Condition: The machine comes from an active production environment. The optical condition is in accordance with its age. Signs of use on the paintwork and cladding are present and clearly visible in the pictures. An inspection and testing of the machine on site is possible after making an appointment. In addition, a high-quality HAINBUCH SPANNTOP nova 42 KK5 chuck can be purchased (optional – not included in the purchase price). - Manufacturer: HAINBUCH - Model: SPANNTOP nova 42 KK5 - Order No.: 2702/0003 Gujdjz Iqv Hjpfx Acaoh - Current new price of comparable HAINBUCH chuck systems: approx. €3,000 net - Chuck jaws / collets are not included Location: 93073 Neutraubling, Germany Availability: Available on short notice / upon agreement Price: Price on request / negotiable Sale from location. Includes free loading onto the buyer's transport vehicle.

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2018, controller model: Rexroth IndraMotion MTX, laser type: CO₂ laser, laser power: 3,200 W, punching force: 22 t, Standard equipment: Machine - Work area 3050 x 1550 mm - Drives with maintenance-free three-phase motors - Stable, easily accessible C-frame - Coordinate guidance - Linear magazine with 25 positions for clamping dies and tools - Follow-up device with programmable pressure clamp - Flap for stamped parts 500 x 500 mm incl. sensor - 2 scrap containers (=> not included with part conveyor belts) - Foot pedal for die closing - FocusLine - NitroLine - FastLine - FlyLine - PlasmaLine - Additional Xp and Yp axis - Ejection cylinder for laser parts - Fast flap for laser parts 500x500 mm incl. sensor - Adjustable laser cutting support - Slag cone detection TRUMPF Laser - Laser TruFlow 2700 incl. LensLine and optimized standby mode - High-frequency excitation - Closed beam guidance - Fine filtration of compressed air for beam pipe ventilation Cutting Head - Lens cutting head with 170 mm focal length - Universal cutting head quick-change device (UTI) - LensLine with condition monitoring - ControlLine Punching Head - Electro-hydraulic punching head - Rotatable mono-tool holder - Programmable pressure clamp position - Tool length compensation - Scrap extraction - Calculation of filling level in the punching console - Stroke counter for punches - Spray lubrication for punches - Level monitoring for tool lubrication Control System - Open control system based on Bosch Rexroth IntraMotion MTX - Integrated technology data - 160 GB hard drive capacity - External control panel with 15" TFT touchscreen - Programmable cutting gas pressure - Teleservice interface via the internet - Automatic shutdown with wake-up function - Production plan Data Transfer - USB interface - RJ45 network connection - Wireless Operation Point (basis for Visual Online Support) Safety - CE marking - Multi-beam light barriers - Rapid shutdown of drives - Warping detection - Protection against stray radiation - Compact dust extraction system Godpez Rl Nzofx Acaeuh Extended Standard Equipment - Hydraulic clamping die (4 pieces) - Ball tables (=> not included with brush tables) - Chip container (=> not included with chip conveyor) - Cooling unit (water-air) + Laser TruFlow 3200 incl. LensLine and optimized standby mode + MultiTool function + Thread forming function + MultiShear function + Roll technology function + Softpunch function + StripLine function + Active die + Height-adjustable clamping die (4 pieces) + Follow-up cylinder - Vibration-damped installation + Chip conveyor with tilting container + Brush tables with loading and unloading assistance SheetMaster N0140A0054 automation: - Suction frame with 36 suction cups (y-axis = 400 mm) - Movable suction bars (v-axis = 170 mm) - Peeling suction cup - Vacuum sensor - Sheet thickness gauge for double-sheet detection - Central lubrication - TRUMPF control system based on Rexroth IndraMotion MTX - Automatic die closing of the machine + Extended guide rail + Table extension (brush design) + Fixed additional support table on the left (brush design) + Automatically adjustable additional support table on the right (brush design) + Large C-frame for processing oversized parts + Parallel loading and unloading of the SheetMaster during main processing time + Unloading monitoring + Lowerable GripMaster for large formats (3000 x 1500mm) + Scissor lift table (3000 x 1500)

Condition: not inspected (used), machine/vehicle number: 42893, Lead screw and feed spindle lathe, manufacturer: ZMM/Bulgaria, type: L400 TS, serial number: 42893, year of manufacture: unknown, turning length: 1,000 mm, up to 2,180 rpm, 3-axis digital display, manufacturer: Facor, Multifix steel tool holder, coolant system, tailstock, light, splash guard, 3 steady rests, 4-jaw chuck, accessories. Gjdpfx Acez R Naleaouh