Used Arburg 470S 1100-290 2K for sale (5,901)

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, 2000 Arburg projector. 130 tons of closing force. The machine is delivered completely reconditioned in our facilities in Heras (Cantabria). New gaskets in the sealing body. We can show it in operation. Technical details CLOSING POWER 1300 kN PLATE DIMENSIONS 660x840 OPENING STROKE 575mm Dodpfx Akerxtpdjhskr MAXIMUM DISTANCE BETWEEN PLATES 800/850 DISTANCE BETWEEN COLUMNS 420x420/470x470 SPINDLE 50mm INJECTION VOLUME 353cm3 INJECTION WEIGHT 117 YEAR OF MANUFACTURE 2000 INJECTION PRESSURE 2500bar

Condition: ready for operation (used), Year of construction: 2015, clamping force: 1,600 kN, This 6-axis Arburg Allrounder 520 S 1600-290 / 290 was manufactured in 2015. It features a highly wear-resistant thermoplastic cylinder with a 30 mm diameter and a drive unit powered by a 30 kW motor. The machine is equipped with advanced control systems for both injection units and supports multi-component processing. If you are looking to get high-quality injection moulding capabilities, consider the Arburg Allrounder 520 S 1600-290 / 290 hydraulic injection moulding machine we have for sale. Contact us for further details. • Injection units and plasticizing • 1st injection unit: • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Nozzle contact force controlled, programmable • aXw Control ScrewPilot • 2nd injection unit: • 2nd injection unit 290, vertical • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Open nozzle 30 mm with nozzle tip; extended nozzle tip +20 mm; radius 15 • Heating band for open nozzle • Nozzle contact force controlled, programmable • aXw Control ScrewPilot • Standard worm gear coupling; coupling geometry: double-sided • Multi-component processing; parting line setup on short runners for 2nd injection unit • Injection closing with mold (“flying injection”) • Drive, hydraulics, and cooling • 65 l/min charging flow rate • Pressure accumulator module, 64 l storage volume (max. 230 bar); accumulator drive • Continuous oil cooling and filtration; increased cooling capacity • Machine cooling circuits controlled • Clamping system, ejector, and core pulls • Clamping plate set; central Ø 125 mm • Minimum installation height 450 mm (extended) • Ejector pressure P/Q controlled (requires T2); ejector cross • Core pulls: • Core pull 1 simultaneous movement (P/Q controlled, programmable) • Core pull 2 simultaneous movement (P/Q controlled, programmable) • Core pull 3 simultaneous movement (P/Q controlled, programmable) • Pneumatic core pull control 4 incl. pressure reducer • Electric core pull control 1 (requires VE 436/00) • Tool pneumatics/hydraulics connections • Electrical connection pneumatic NVD 1 (in tool) • Electrical connection pneumatic NVD 2 (in tool) • Electrical and hydraulic connection NVD 3 (in tool) • Electrical and hydraulic connection NVD 4 (in tool) • Blow-out device 1 with pressure reducer; connection for blow-out device 2 • Cooling water and mold circuits • Shut-off valve for cooling water (inlet); shut-off valve for cooling water (inlet 2) • Cooling water filter 100 µm (inlet) • 3 cooling water circuits to fixed mold plate; 3 cooling water circuits to moving mold plate • Basic equipment for 2nd cooling water distributor (manual) with 7 free cooling circuits • Control and electrics • Selogica direct control; technology level • Fuse protection for heating circuits (1–6 with 16 A) Djdsyxdwdepfx Akhokr • 15 electrical heating circuits for mold heating • Boost function for heating circuits (hot runner) • Upper guard open, raised to safety clearance • Fault indicator with flashing light • Operator authorization with chip card (EUROMAP 65) • Interfaces and connectivity • Interface for conveyor belt (machine base) • Prepared for six-axis robot with SELOGICA interface • Robot interface (EUROMAP 67), 50-pin • Emergency stop interface (24-pin, 2-channel) • Basic equipment for electric axis control • Host computer interface OPC-UA • Temperature control unit interface (20 mA); temperature control cable HB-THERM • Serial printer interface USB; external USB keyboard interface

Condition: ready for operation (used), Year of construction: 2020, clamping force: 2,200 kN, screw diameter: 70 mm, injection weight: 172 g, This Arburg 570 S 2200-800/290 was manufactured in 2020. It features a hydraulic drive system and the Selogica control system for precise operations. With a clamping force of 2,200 kN and a screw diameter of 40 mm, it is ideal for detailed injection moulding tasks. Consider the opportunity to buy this Arburg 570 S 2200-800/290 hydraulic injection moulding machine. Contact us for more information. Clamping unit • Distance between tie bars: 570 × 570 mm • Opening stroke: 650 mm • Ejector force: 70 kN • Ejector stroke: 200 mmInjection unit • Injection unit size: 290 • Injection pressure: 2,500 bar • Shot volume: 188 cm³Drive & control • Drive system: Hydraulic Dkedpfx Ajx Nkp Iskhjr • Control system: ARBURG Selogica

Year of construction: 2003, condition: ready for operation (used), Clamping force: 1300kN, screw diameter: 40mm, max. injection pressure: 2120bar, shot volume: 182m³, shot weight: 153g, tie bar spacing: 470mm/470mm, platen dimensions X/Y: 650mm/650mm, min. mold installation height: 275mm, max. opening stroke: 850mm, centering: 125mm. Machine dimensions X/Y/Z: approx. 4600mm/1600mm/2200mm, weight: approx. 5500kg. The clamping unit shows an oil leakage at the clamping cylinder. Documentation available. An on site inspection is possible. Dksdpfsygw Sijx Akhjr

Condition: excellent (used), Year of construction: 2009, operating hours: 3,645 h, clamping force: 2,500 kN, screw diameter: 35 mm, Arburg 1500T 2500-400/400/290 3K injection molding machine (235) Number: 235 Availability: in stock Year of production: 2009 Producer: Arburg Injection molding machine condition: used Screw diameter [mm]: 35, 40 Closing force [kN]: 2500 Dkjdpow Hx Uyofx Akhor Plate size [mm]: 1500 Working hours [h]: 3645 Weight [kg]: 11200

Condition: excellent (used), Year of construction: 2006, operating hours: 95,822 h, clamping force: 1,000 kN, screw diameter: 40 mm, clearance between the columns: 420 mm, displacement volume: 188 cm³, injection pressure: 1,530 bar, injection weight: 172 g, mold height (min.): 250 mm, Arburg 420C-1000-290 injection molding machine with sorting flap Number: 239 Djdpfxswwi Huj Akhjkr Availability: in stock Year of production: 2006 Producer: Arburg Screw diameter [mm]: 40 Injection weight [g]: 172 Injection pressure [bar]: 1530 Closing force [kN]: 1000 Column spacing [mm]: 420x420 Plate size [mm]: 570×570 Min. form height [mm]: 250 Control type: Selogica Tongue: german Installed power [kW]: 21.4 Working hours [h]: 95822 Weight [kg]: 3700 Dimensions [mm]: 4400×2000 Feed hopper: NO Robot nest: Yes Core string: Yes

Condition: excellent (used), Year of construction: 2008, operating hours: 67,848 h, clamping force: 700 kN, screw diameter: 35 mm, displacement volume: 144 cm³, injection pressure: 2,000 bar, injection weight: 132 g, Injection molding machine Arburg 370S-700-290 Product Code: 232 Dkjdpovwcbgsfx Akhjr Availability: In Stock Year of production: 2008 Brand: Arburg Technical data Shot Weight: 132 g Clamping Force: 700 kN Screw dia: 35 mm Injection pressure: 2000 bar Tie bar distance: 370x370 mm Platen size: 510x510 mm Mould height min.: 200 mm Total day-light max: 600 mm Type of controls: Selogica Language: German Power: 23,9 kW Workinghours: 67848 h Weight: 3300 kg Dimensions: 3,8x1,5 m Hopper: No Euromap: Yes Air valve: Yes

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: 184686, clamping force: 1,000 kN, screw diameter: 25 mm, clearance between the columns: 420 mm, displacement volume: 54 cm³, injection weight: 45 g, opening stroke: 500 mm, For sale is an Arburg injection moulding machine, model 420 C 1000-150/60. The machine is in excellent technical condition and has been very well maintained. Technical data: Year of manufacture: 2001 Clamping force: 1000 kN Tie bar spacing: 420 x 420 mm Opening stroke: 500 mm Mould installation height: 250 mm Mould mounting plate: 570 x 570 mm Ejector stroke: 175 mm Dkjdjx Itamjpfx Akhor Screw diameter: 25 mm Calculated shot volume: 54 cm³ Shot weight: 45 g/PS The machine is offered without periphery. Rotary table, material conveying systems, temperature control units and other accessories are not included.

Condition: good (used), Year of construction: 2001, functionality: fully functional, clamping force: 1,300 kN, screw diameter: 35 mm, clearance between the columns: 850 mm, ejector stroke: 575 mm, plate width: 650 mm, plate height: 650 mm, For sale is an Arburg 470 S 1300-675 injection molding machine. Technical specifications: Year of manufacture: 2001 Pump hours: 90,176 Dkjdpjwivkdofx Akhsr Automatic operation: 76,747 Clamping force: 1300 kN Opening stroke: 575 mm Distance between bars: 850 mm Minimum mold height: 275 mm Clamping platen size: 650 x 650 mm Ejector stroke: 175 mm Ejector force forward/backward: 40 Nm Screw diameter: 35 mm 50 mm replacement cylinder available for an additional charge Geiger Handling MiniLiner 3.0 is included in the offer. Transport and loading can be arranged throughout Europe upon request for an additional charge. Prices exclude VAT. Viewings are available by appointment. Contact us; our team will be happy to assist you. Trade-in or exchange possible! Machine Purchase/Sale PURCHASE/SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality, yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or to contact us, visit our website.

Condition: good (used), Year of construction: 2006, Clamping force: 150 tons Opening stroke: 500 mm Mould height: 250 mm Clamping platen daylight: 750 mm Distance between tie bars: 470 x 470 mm Mould clamping plattens (b x h) : 650 x 650 mm Dksdpfx Ajzatfrekhjr Ejector stroke: 175 mm Screw diameter: 40mm Injection volume: 201 cm3 Shot weight: 184 g Working hours: 33.165 h Core pullers: 1x Air blast: 1x Robot interference: yes

Condition: like new (used), Year of construction: 2006, Arburg 470 C 1500-350 (2006) Working hours : only 7.113 h Djdpfx Akjxqx H Ishekr Clamping Force: 150 tons Tie-bar Spacing: (H × V): 470 mm × 470 mm Maximum Plate Size : 650 mm × 650 mm Minimum Mould Installation Height: 250 mm Maximum Distance between Platen (when fully open): ~750 mm Mould Opening Stroke : 500 mm Screw Diameter: 45 mm Approximate Shot Volume (Injection Volume): 230 cm³ Approximate Shot Weight (for PS): 210 g Injection Pressure: 1 670 bar Motor/Drive Power: Example listing ~ 37 kW servo/hydraulic drive power Heating Power: Example listing ~ 10.2 kW Machine Dimensions (Length × Width × Height): 5.4 m × 2.0 m × 2.2 m Machine Weight:4 500 kg

Condition: ready for operation (used), Year of construction: 2014, operating hours: 22,626 h, clamping force: 100 kN, screw diameter: 15 mm, Hydraulic injection moulding machine manufactured in 2014. This Arburg 470 H 1000-170 features a closing force of 100 tons and a screw diameter of 15 mm. It includes a selection unit and a single platen design, with a beam spacing of 470 x 470 mm. If you are looking to get high-quality injection moulding capabilities, consider the Arburg 470 H 1000-170 machine we have for sale. Contact us for further details. • Selection unit: yes • Single platen: yes Dodpozm S Auefx Akhokr • Beam spacing: 470 x 470 mm • Operating hours: 22,626 h • Electricals: • Operating voltage: 400 V, 3~, 50 Hz • Control voltages: 230 V, 50 Hz; 24 V~ • Motor/heating rated current: 80 / 58 A • Total rated current: 138 A • Total connected load: 75 kW • Condition note: small servo motor problem Additional equipment • Geiger handling (optional)

Condition: used, Year of construction: 2000, overall weight: 60 kg, terms of delivery: FCA Pegnitz Dedpfx Aex Iwc Eekhjkr delivery time: on request terms of payment: 100% prior to delivery

Year of construction: 2000, condition: ready for operation (used), Two injection moulding machines are available. 1) Ferromatik K 110 1100-493, year of manufacture: 2000, clamping force: 1100kN, min. mould installation height: 300mm, max. opening stroke: 550mm, screw diameter: 40mm, injection volume: 201cm³. The control no longer starts up properly, probably due to the circuit board. Includes a 3-axis handling robot Remak. Without conveyor belt. 2) Arburg 270 M 500-90, year of manufacture: 1995, clamping force: 500kN, min. mould installation height: 225mm, max. opening stroke: 325mm, screw diameter: 30mm, injection volume: 70cm³. The cylinder is slightly leaking. Documentation available. An on-site inspection is possible. Dkjdow Ni Ibopfx Akhor

Condition: good (used), Dimensions: Width: approx. 2,900 mm Height: approx. 1,038 mm Depth: approx. 1,100 mm Technical data for the workbench frame: Manufacturer: Jung Heinrich Type: T Included in the scope of supply: 02x workbench stands, used Material color: blue Stand height: 1,000 mm Stand depth: 1,100 mm Stand profile: 100 x 65 mm Includes cross and diagonal braces, base plates The stands are pre-assembled (welded framework) 02x workbench crossbeams, used Material color: yellow Box profile: 120 x 50 mm Crossbeam type: HN 120|25 Clear span: 2,700 mm Dkodpfxelnfi Rj Akhjr 04x locking pins, used Design: fully galvanized 01x chipboard, 2nd choice, used Chipboard thickness: 38 mm Chipboard width: 2,900 mm Chipboard depth: 1,100 mm Chipboards may be in two parts 08x drilling screws, new Design: galvanized Dimensions: 6.3 x 70 mm The images serve to illustrate the material. The material color may vary. - The workbenches are delivered disassembled; - The workbench stands are pre-assembled; - The production time is usually approx. 3 - 5 working days.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, clamping force: 700 kN, Equipment: documentation/manual, Seologica controll Clamping force: 70 t Djdpfx Asygtqujkhokr Screw diameter: 40 mm (highly resistant) Distance between tie bars V: 370 mm Distance between tie bars H: 370 mm Tie bar distance: 370x370 mm HxV plates: 510x510 mm Mould tickness min-max: 200 Stroke: 400mm Shot volume: 188 cm3 Type: Uni Drive: Hydraulic Air valve: 1 Hours: 23000 2 servo pumps 4 free cooling circuits 6 electric heating zones for mould

Condition: used, Arburg double axial pump AKP28 + AKP10- removed from Arburg Allrounder 275 V 25 removed from running machine - fully functionalmanufacturer: Arburg Dkodpfsu Tv A Rsx Akhor type: AKP28 + AKP10 spare part no.: 250.957 manufacturer no.: R9 R9Type code: A10VS0 28 DFR1/31R-PPA12KB2-S1894, A10VS0 10 DFR1/52R-VSA14N00-S2679The number before the first slash describes the device series. For this reason, this digit of the type code on your old spare part may differ. If you have any questions, please do not hesitate to contact us.

Condition: new, Heidenhain AK ERA 8480 1100 - 2900 03S12 H2 L 3, Serial No.: 53975450, unused, in original packaging, 100% functional, scope of delivery as shown in the photos. Dkodpfx Aoi Eafvokher

Condition: used, Gear motor, electric motor, electric gear motor, adjustable gear motor, variable speed gear motor -Manufacturer: Lenze, adjustable geared motor with brake -Gearbox: Type GST04-2K VBR 071-12 10B i= 45 -Adjustment gear: KMB-1100366 75 - 14 rpm -Spring-loaded brake: BFK458-08-N 8 Nm Dkjdpfx Aottilzjkhjr -Engine: Type MDERABR 071-12 0.25 kW / 1400 rpm -Shaft: Ø 20 x 40 mm -Design: B3 -Dimensions: 410/280/H205mm -Weight: 17.8 kg

Condition: good (used), Year of construction: 2010, Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor -Manufacturer: Transnorm, belt conveyor type 1100 -Speed: frequency-controlled, up to 83.5 m/min -Drive: SEW-Eurodrive 1.1/0.11 kW, see photo of nameplate -Brake: 10 Nm -Belt width: 600 mm -Conveyor length: approx. 7290 mm / approx. 780 mm height adjustable -Installation dimensions: 7290/860/H340 mm -Transport dimensions: 4230/860/H570 mm Dodeihc Uwjpfx Akhekr -Total weight: 358 kg

Condition: new, Year of construction: 2021, Transnorm belt curve conveyor right GKF 90°-1300-1100-IR900 -- NEW RA2332 Technical data: Frame width (NB): 1300 mm Frame width with Bearing cover: 1400 mm Frame width with Bearing cover and gearbox (MB): 1500 mm belt width (GuB): 1100 mm height (BH): 160 mm height motor below: 360 mm height including motor (MH): 520 mm Inner radius (IR): 900 mm Conveying angle: 90° degrees middler conveying speed (v m/s): 1,5m/s Drive: SEW motor motor with frequency converter Electrical data: 50Hz V380-500, kW 2.2 / S1 Belt: KT 96 new Year of construction: 2021 Optionally available: Supports Sideguides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics Dedpevg Nfqofx Akhokr

Condition: excellent (used), Year of construction: 1994, Wide belt sander Dkedovuza Nopfx Akhsr Manufacturer: Bütfering Type: AWS 2 KC 1100 Year of manufacture: 1994 Working width: 1,100 mm Max. passage height: 150 mm Number of sanding units: 2 Sanding roller power: 15 kW Sanding shoe power: 11 kW Feed power: 1.5 kW Feed: 3 - 15 m/min, continuously adjustable Weight: approx. 3,300 kg Dimensions: 1,750 x 2,210 x 2,280 mm

Condition: excellent (used), Year of construction: 2005, operating hours: 36,012 h, clamping force: 1,500 kN, screw diameter: 45 mm, clearance between the columns: 470 mm, displacement volume: 318 cm³, injection pressure: 2,470 bar, injection weight: 291 g, mold height (min.): 250 mm, Arburg 470C-1500-800 injection molding machine with conveyor belt and picker (257) Dkedpfx Aszfhx Askhor Year of production: 2005 Producer: Arburg Injection molding machine condition: used Screw diameter [mm]: 45 Injection weight [g]: 291 Injection pressure [bar]: 2470 Closing force [kN]: 1500 Column spacing [mm]: 470 x 470 Plate size [mm]: 650 x 650 Min. mold height [mm]: 250 Control type: Selogica Language: german Installed power [kW]: 44.9 Working hours [h]: 36012 Weight [kg]: 4860 Dimensions [mm]: 4400 x 1600 Core string: 1x Robot socket: euro12 Feed hopper: NO

Condition: excellent (used), Year of construction: 2014, Equipment: documentation/manual, Arburg 470C 1500 400 (2014) Golden edition Clamping force: 150 t Screw diameter: 45 mm (wear resistant) Distance between tie bars V: 470 mm Distance between tie bars H: 470 mm Dkjdpfox Elqrox Akher Type: Horizontal Drive: Hydraulic Air blow 2 units Euromap 67 for robot 2 pumps machine Injection pressure incrased 10% (2500bar) HOURS: 54914

Condition: excellent (used), Year of construction: 2014, operating hours: 52,999 h, clamping force: 1,500 kN, screw diameter: 40 mm, clearance between the columns: 470 mm, displacement volume: 201 cm³, injection pressure: 2,000 bar, injection weight: 184 g, mold height (min.): 250 mm, Arburg 470C-1500-400 injection molding machine with sorting flap (255) Year of production: 2014 Producer: Arburg Injection molding machine condition: used Screw diameter [mm]: 40 Injection weight [g]: 184 Injection pressure [bar]: 2000 Closing force [kN]: Dsdpfx Akjy U H Htshskr 1500 Column spacing [mm]: 470 x 470 Plate size [mm]: 650 x 650 Min. mold height [mm]: 250 Control type: Selogica Tongue: german Installed power [kW]: 30.4 Working hours [h]: 52999 Weight [kg]: 4850 Dimensions [mm]: 4500×1700 Feed hopper: NO Core string: 2x Robot socket: euros 67