Used Aro Spot Welding Machine for sale (76,639)

Condition: used, MF welding machine with water-cooled projection welding head Medium-frequency projection welding head Manufacturer: TECNA (Italy) Model 3670 E CF00 Itjdpfx Agog U A Uzs Ajn Serial No.: Year of manufacture 2014 Rated welding power 25 kVA Max. welding power 160 kVA Mains connection 400 Volt, 50 Hz - Welding control TE750 or TE760 - Projection welding head for single-sided spot welding - Ideal for repair work in the bodywork area, ensuring the best welding quality - Water-cooled, type 2BHPLN - Mobile transport trolley Weight approx. 155 kg Very good condition - like new

Condition: used, machine/vehicle number: 73947, Spot welding machine NimakPMP5/35 Welding power: 35 kVA, connected load: 83 kVA Isdpeyl Acqofx Ag Ajtn

Condition: excellent (used), Air-operated, water-cooled 3-phase direct current spot welding machine make DALEX type PMS 11-4 G3 Asload: 650 mm with special cylinder with low pressure range of 20-120 daN Rated power at 50 % duty cycle 60 kVA Sec. short-circuit current: 25 kA sec. open-circuit voltage: 3.68 V Itjdpou A Dg Eefx Ag Ajn with add-on switch cabinet in accordance with VDE 0100 Main switch Synchronous welding control 8036 Weight: 685 kg

Condition: good (used), nominal power at 50% duty cycle: 8 kVA, – Capacity: 8 kVA – Timer – 380 V Isdpevbr Dlsfx Ag Astn

Condition: used, Spot and projection welding machine NIMAK type BMP 20/150 Spot welding machine, projection welding machine Mach. No. 81692 year of manufacture approx. 1980 Power at 50% duty cycle 150 kVA Clamping plate below 200 x 160 mm Clamping plate above 200 x 160 mm Power setting continuously variable Max. projection 150 mm Electrode force 200 - 2000 kp continuously variable Operating air pressure max. 6 bar Connection power 600 kVA Mains connection 380 volts, 50 Hz - Welding control DTW 4Z 2P - Single spots and series spots - Parallel electrode guidance - Water-cooled without cooling unit - Electric 2-hand control panel with emergency stop - Control cabinet with control permanently attached to the machine Space requirement L x W x H 1000 x 800 x 1800 mm Isdev Dxm Sjpfx Ag Aetn Weight 900 kg good condition

Condition: used, Spot welding machine, projection welding machine DALEX type PL 63 Serial No. N-0051390 Year of manufacture 2018 Output at 50% duty cycle: 63 kVA Output at 100% duty cycle: 44.5 kVA Iodpeycv Sasfx Ag Aotn Maximum welding power: 182 kVA Rated welding current: 8.77 kA Throat depth: 250 - 550 mm Maximum arm spacing: 150 to (310 mm) Upper electrode arm diameter: 50 mm Lower electrode arm diameter: 60 mm Electrode holder diameter: 25 mm Electrode stroke max.: 65 mm Electrode force: 100 - 600 daN Operating air pressure: 1 to 6 bar Power supply: 400 Volt, 50 Hz Rated current: 158 A Connected load: 137 kVA - Thyristor power stage - Welding control HARMS+WENDE - HWH MPS 10β - 5-stage control, single spot, series spot, 8 programs - Electrode force infinitely adjustable via air pressure - Parallel electrode guidance - Single-stroke welding cylinder - Water-cooled via external water cooling system (recirculating water cooler not included) - Electric foot switch - Control cabinet with controller fixed to machine - Operating manual Required space (L x W x H): 1150 x 700 x 1600 mm Weight: 335 kg As-new condition

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Water-cooled, pneumatic spot welding tong Nimak L193 TB. Very good used condition, fully functional. Item located in 75053 Gondelsheim. See photos. Shipping by forwarding agent or collection. Ijdpfx Agsxmuyps Ajtn

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Water-cooled, pneumatically operated spot welding tongs Nimak L123 Very good used condition, fully functional. Itjdpfx Asxmuyvjg Aen Item location is 75053 Gondelsheim See pictures Shipping via freight forwarder or collection

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, type of input current: three-phase, throat depth: 430 mm, nominal power at 50% duty cycle: 88 kVA, type of cooling: water, overall weight: 279 kg, Electrode holder, electrode arms, transformer and water-cooled electrodes Welding controller with graphic display Medium-frequency technology / inverter Welding controller PY800 Itjdpfx Ageyvx Hzj Aen Electrode stroke 60 mm Water requirement 9 L/min

Year of construction: 1999, condition: excellent (used), Spot welding machine NIMAK PMP 5/35 + water cooling unit Year of construction approx. 1980 Power at 50% ED 35 kVA Projection 250 - 450 mm Working stroke 40 mm Electrode force 100 - 460 kp infinitely adjustable Electrode force at 6 bar 460 daN Operating air pressure 2 to 6 bar Electrode arm Ø 60 mm Electrode holder Ø 30 mm Insertion electrodes cone MK 2 Ø 17.78 mm Arm distance 200 / 400 mm Adjustability of the electrode holder 200 mm Connected load 83 KVA Mains connection 380 volts, 50 Hz - 4-time control - stepless power adjustment - Single points and series points - parallel electrode guidance - Water-cooled (without cooling unit) - electric foot switch Weight 300kg Itedpfsium Nijx Ag Aon

Condition: new, Year of construction: 2005, functionality: fully functional, Description Manufacturer: Amada Miyachi Type: STA-100A Model Number: 1-1-BAKA -AEA-01 Serial Number: 17010009 Condition: Used, New AC Resistance Weld Control Easy to use programming interface For controlling and integrating projection welders, press welders, multi-gun machines, portable welding guns, seam welders, robotic systems, swing-arm welders and other special purpose machines. Examples: Consumer Appliances Nuts and Studs Projection Welding Electronics and Automotive Parts Aerospace Parts Office Furniture Automotive Sheet Metal Input Power: 230-460 VAC Iodswcax Eopfx Ag Aetn Output Range: 1000-80,000 A Phase: Single Welding Period Range: 0-99 Description Manufacturer: Amada Miyachi Type: STA-100A Model Number: 1-1-BAKA -AEA-01 Serial Number: 17010009 Condition: Used, New AC Resistance Welding Controller Easy to use programming interface Used to control and integrate projection welders, press welders, multi-gun machines, portable welding guns, seam welders, robotic systems, swing-arm welders and other special purpose machines. Examples: Consumer appliances Nuts and studs projection welding Electronic and automotive components Aerospace components Office furniture Automotive sheet metal Input power: 230-460 VAC Output range: 1000-80,000 A Phase: single Welding period Range: 0-99

Condition: good (used), Medium frequency 1000 Hz spot welding machine, 400 V 50 Hz Make: DALEX Model: PMS 11-4 MF Arm reach: 950 mm with double-acting cylinder Rated power at 20% duty cycle: 180 kVA Secondary short-circuit current: 37 kA Itodpfx Asvyk Sfeg Ajn Secondary open-circuit voltage: 9 V Electrode force: 60-600 daN Weight: 550 kg

Condition: not inspected (used), throat depth: 500 mm, Manufacturer: Fase Full: 116 kVA Version: 500mm Itedjuhn Uhopfx Ag Aen The machine used to be part of a system, its settings and performance were controlled via a central control unit, which is currently missing, This version is required to operate the machine!

Condition: ready for operation (used), throat depth: 550 mm, Output: 25 kVA Design size: 550 mm Itjdpfx Agjyk S Uto Aen

Condition: used, throat depth: 420 mm, nominal power at 50% duty cycle: 60 kVA, input voltage: 400 V, type of cooling: water, nominal power (apparent): 14 kVA, Spot welding machine, Type 8003 TECNA – for welding nuts and sheet metal – completely overhauled and tested. Rated voltage: 400V Rated power: 60 kVA at 50% duty cycle Short-circuit current: 22 kA Welding current: 17.6 kA Fuse rating: 125A Outreach: 420mm Electrode force: 470 daN Cylinder with pre-stroke Total stroke: 80mm Double stroke: 60mm Electrode cone: MK2 Lower console, height-adjustable by approximately 300mm Welding control unit TE 180 with digital display of welding current, current rise, etc. Main switch on the control cabinet - new 2-stage foot switch according to UVV regulations - all pneumatic and water hoses replaced - electrode holder new - original documentation / operating manual available - machine inspection with confirmation valid until 09/2026 - weight approximately 330kg Isdpjh N Sd Uefx Ag Aotn Demonstration and inspection by appointment only. Commissioning and training at the customer's site possible for an additional charge. The machine is located in Dresden, near the A17 motorway. And we also have a suitable cooling unit in stock – of course, for an additional charge ;-)

Condition: good (used), nominal power at 50% duty cycle: 50 kVA, - Power 50 kVA - Pneumatic - Throat depth 425 mm - PX 1500 Plus control - 400V Ijdpfsyda Dvex Ag Aetn

Condition: excellent (used), functionality: fully functional, WMA WMP 08 Spot Welders in TOP Condition, The unit shows barely any signs of use and has only been operated very occasionally. Air-cooled one-handed spot welding unit for vehicle manufacturing, tank construction, steel cabinet fabrication, sheet metal processing, and the wire industry. - Trouble-free welding of all sheet metals - Galvanized sheets can be welded perfectly thanks to controlled current rise and fall - Air-cooled, equipped for external water cooling - Tools can be easily changed using standardized rotating connectors - Only one plug required for welding current, control cable, and water cooling - Always reproducible welding results thanks to built-in automatic energy control Microprocessor Thyristor Control - Constant current regulation - Continuous process monitoring - Simple and ergonomic operation - All set parameters and process values are visible at a glance - Changes to welding parameters allowed only for authorized personnel - Management of configuration and program settings possible via a central PC WMA WMS 108 Microprocessor Thyristor Control - 7 time settings - 8 program slots - Built-in controller - Automatic mains frequency detection 50/60 Hz - Power outage-proof parameter storage - 'with/without current' toggle at the press of a button Additional configuration parameters (locked for user): - Program selection - Advance contact - Advance contact time - Two-hand lock (check) - Locking start signal - Current flow control - Response threshold - Current flow monitoring - Monitoring time - Current flow control - Power factor adjustment - Delay first half wave External inputs (24V, DC stabilized and switching): Itodpfxexrb Tgj Ag Ajn - Thermal switch - Thyristor temperature - EMERGENCY STOP - Start 1 - Start 2* - Pressure contact - Program 1* - Program 2* - Pre-stroke ON - Program interruption after hold time (only force) - Two-hand lock (check)* * These functions can be activated or locked via configuration parameters. External outputs (24V, DC unstable ± 20%; + switching, max. 5 W): - Solenoid valve pre-stroke - Solenoid valve welding - Relay advance contact - Relay ready for operation Dispatch via freight carrier possible upon prior arrangement. #8407

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Description 2X MACHINE READY FOR OPERATION Automatic cooling by fan The system is delivered ready for welding with the following accessories: Contact gun type AS 1802 with 6.5m welding cable 2 ground cables with grip clamp quick connection 1 set of bolt holders M3,M4,M5,M6,M8 Welding machine: 13 kg Welding gun 0.94 kg Dimensions L x W x H : 350 x 185 x 280 mm Itedpfxevk Umbj Ag Aon Specifications Manufacturer ARNHOLD Model 1066 Year 2019 Condition Used Capacitor Capacitance 66,000 μF Bolt diameter M2-M6 (M8) Weld sequence depending on diameter 6 - 14 bolts/min

Condition: good (used), Spot welding machine, spot welding system, spot welding gun, resistance spot welding machine, lever-operated spot welding machine, roller seam welding machine, projection welding machine -Manufacturer: Dalex, spot and projection welding machine with roller table -Type: PMS 14-4 -Rated power: 200 kVA -Protrusion: 740 mm -Operation: via foot pedal -Individual components: including documentation, see photos Itjdpfxey Au Eyo Ag Aen -Submission/Price: complete -Dimensions: Machine 2120/890/H1680 mm / Table 2730/800H1055 mm -Weight: 966 kg / 70 kg

Condition: good (used), Year of construction: 2001, Offer 26161 Technical data: - Rated power at 50% duty cycle: 25 kVA - Max. welding power: 107 kVA Ijdszfim Ijpfx Ag Astn - Adjustable reach: 140 - 500 mm - Welding parameters: - Steel sheet: 6 + 6 mm - Brass sheet: 3 + 3 mm - Aluminum sheet: 1.2 + 1.2 mm - Adjustable electrode force: 17 - 278 daN - Required air pressure: 6 - 10 bar - Cooling water flow rate: 8 l/min - Power supply: 400 V - Space requirement: approx. W 670 x H 1250 x D 1600 mm - Weight: approx. 240 kg - Including: - Welding control system DALEX MPS 200 - Foot-operated switch

Condition: excellent (used), Spot welding machine with single-acting cylinder and flange-mounted electrode holders above and below Itsdpfx Ajtuwz Iog Ajn Make: DALEX Type: PMS 14-3 Throat depth: 350 mm Rated power at 50% duty cycle: 80 kVA Secondary short-circuit current: 54.5 kA Secondary open circuit voltage: 7-14 V Electrode force: 80-1,200 daN Equipped with: 8-step switch Main switch Attached control cabinet HARMS+WENDE Synchronous welding control MPS 200 8 welding programs with AEG nameplate Start via foot pedal

Condition: good (used), Year of construction: 1976, Spot welding machine, spot welding system, spot welding gun, resistance spot welding machine, lever-action spot welding machine -Stationary -Operation via hand switch -Arm length of welding machine: 350 mm -Welding pliers type: -Steering -Machine dimensions: 1500/1000/H1670 mm -Machine weight: 774 kg Iedpec N Uabofx Ag Aotn -Dimensions of control cabinet: 1550/420/H1960 mm -Weight of control cabinet: 330 kg

Condition: used, SURFACING AND JIG BORING MACHINE DUAP ZS 80/1400 • Maximum piece length: 1500 mm • Minimum piece length: 70 mm • Maximum piece diameter: 80 mm • Minimum piece diameter: 10 mm Itodpfezcprmex Ag Asn

Condition: used, Cooling unit, water-cooled condenser, DALEX Type DRF 2 Ijdpfjg D H Ruox Ag Aotn Machine No. 38913719, Year of manufacture 1989 Flow rate 0.35 m3/h Cooling capacity 1950 Watts Operating pressure 2 to 3 bar Refrigerant R 134a; unit was converted from R12 to R134a Operating overpressure 18 bar Pipe connection thread 3/4" Tank volume 600 x 400 x 350 mm = approx. 80 liters Mains connection 380 Volts, 50 Hz Space requirement L x W x H 900 x 800 x 1020 mm Weight 100 kg Good condition

Condition: used, Rated power ( 50% ED ) : 50 kVA Continuous power : 35.4 kVA Maximum short circuit power : 163 kVA Iodpfx Aovuz N Rjg Astn High welding power : 130 kVA Arm distance min. / max. : 60 / 230 mm Electrode arm Ø : 45 mm Electrode holder Ø : 25 mm Outreach : 610 mm Machine weight: approx. 285 kg Dimensions : 1200 x 700 x 1450 mm incl. foot switch