Used Azo E450 B1 for sale (1,987)

Condition: used, mileage: 705,000 km, power: 169 kW (229.78 HP), first registration: 03/1970, fuel type: diesel, number of seats: 34, next inspection (TÜV): 08/2026, color: yellow, Year of construction: 1969, 2 former Swiss Postbuses available as a package. Vehicle 1 Saurer L4C left-hand drive One of the last bonneted vehicles on a Saurer chassis. Ljdo Adypbspfx Amzohn Bodywork by Ramseier + Jenzer. The vehicle underwent a complete professional restoration at Ramseier + Jenzer in 1991 (factory restoration). The previous owner had the vehicle for 40 years. Immaculately maintained and immediately ready for operation. 125 hp, 4-speed gearbox + overdrive, power steering, pneumatic doors at the front and rear, length 10,005 mm, height 2,980 mm, width 2,300 mm, 33 passenger seats + driver, 2 roof hatches, radio with microphone. Vehicle 2 Volvo chassis with Lauber body 23 passenger seats, automatic transmission, first registered in 1982, converted to a party bus, length 11,750 mm, 230 hp. Special package price: €99,000.00 Net export available. We make shipment worldwide.

Year of construction: 2012, condition: used, functionality: fully functional, machine/vehicle number: 740-00.001, Oliebollen line – Doughnut frying system Opelka – MB1500 Voltage: 3x230 Volt Power: 12 KW Maximum capacity: 96 L With this machine, you can make all the products listed below: Berliner Pfannkuchen Brezel Berliner Yeast donut Zopf (braided bread) Ausgezogene (long donut) Apfel-Berliner (apple-filled Berliner) Oliebollen (Dutch donuts) Beignet Vanillestange (vanilla stick) Ledps Ad U Ufsfx Amzohn Long John Long John Quarkbällchen (quark balls) Spritzringe (ring-shaped fritters) Cake donut Schneeballen (snowballs) Rosinenbällchen (raisin balls) French Cruller Motchi Tulumba Churros Is your pastry not listed? Tell us more about your pastry.

Condition: used, functionality: unexamined, Year of construction: 2002, lifting height: 3,766 mm, chain length: 11,300 mm, load capacity: 7,500 kg, lifting speed: 35 mm/s, fine lifting speed: 8 mm/s, power: 3.5 kW (4.76 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, 4 Verlinde Eurochain VL25 electric chain hoists, 7.5 tons (7500 kg) each. Made in France, year of manufacture 2002. Each hoist includes a lower block with hook, chain bag, and suspension eye. Lsdoz I T Eqjpfx Amzjhn Details according to the nameplate: Type: VL25 7502 B1 Lifting capacity: 7500 kg 3 chain strands (lower block with 3-strand suspension) Chain: 11.3 x 31 mm Lifting speed: 2.1 m/min fast / 0.5 m/min slow (2 speeds, for precise positioning) Motor: 3.5 / 0.86 kW, 400 V, 3-phase, 50 Hz FEM group 1Bm Protection class IP55, insulation class F CE Condition: used, removed from a building in working order (not yet tested by us). Repainted, shows signs of use, chain with surface rust. Cables partially cut, control panel (push buttons) not included. Sold as is, without inspection. Always have a hoist inspected before use. Suitable for workshops, steel construction, machine construction, and as a spare or for parts. Price per hoist. All 4 together: inquire about the package price. Collection or transport by arrangement. Prices exclude VAT. Export possible.

Condition: refurbished (used), Year of construction: 2014, operating hours: 10 h, functionality: fully functional, machine/vehicle number: SGSHK, compressed air connection: 6 bar, working width: 760 mm, warranty duration: 6 months, operating speed: 1,000 mm/s, Komfi Sagitta 76 with Hot Knife and B1 Stacker Robust and powerful machine suitable for lamination in continuous operation with a standard volume of millions of sheets per year. Designed for time-efficient work: feeding sheets from a pallet including easy placement of the pallet into the machine using laser pointers, elements for quick adjustment of the machine to a new job, air shaft, pneumatic snapping unit or hot knife for reliable separation of a wide range of foils. Also digitally printed job can be easily and conveniently processed on the machine. Well suited and highly applicable for both commercial printing and the packaging industry. Energy saving zone heating system with fastest heat up time. Max. production speed 60 m/min (3600 B1 sheets/h); 50 m/min with hot knife (3000 B1 sheets/h) Max sheet size 760 × 1120 mm (up to 1300 mm) Paper weight 115-600 g/m² Machine dimensions (incl. delivery desk) 4.25 x 1.55 m Basic configuration Feeder: Komfi double action feeding head for reliable feeding even at high speed and small format. Front lay register for precise and constant sheet overlap. Compressor for feeder. Sheet overlap sensor for protection of pressure roller from film sticking in case of a miss-feed. Adjustable separation blowers for reliable separation of sheets from the pile and trouble-free loading of long sheets. Laminating Unit: Powerful pneumatic pressure system to ensure excellent laminating result. Adjustable distance stoppers to enable processing thick substrates and windows lamination. Air shaft for 3″ reel core laminating film. ”On-the-fly” height-adjustable spread roller for perfect smoothing of difficult film before lamination roller. Zone heating of the laminating roller saves energy when laminating small formats. Temperature sensor inside the cylinder for extremely precise regulation. PUR pressure roller for longer roller life. Separator & Delivery: Lhjdezdnpxepfx Amzon Rotary separation knives for reliable film separation at high speed. Built-in perforator to support trouble-free sheets separation, or to be used for special jobs where knife is not applicable. Pneumatic driven separation roller. Automatic (pneumatic) skew wheel increases reliability of separation when processing wide range of jobs. Good to use for long sheets. Adjustable speed of snapping roller for perfect separation of difficult jobs. Jogging table. SW functions included Stop on the sheet overlap to avoid waste sheets. Zero overlap possibility for processing thick substrates. Automatic pressure and temperature detection to prevent irregularity in lamination quality. End of job function for easy rewind of film. Sensor for sheet separation detection and jam detection. Job settings memory Built-in internet connectivity for service support. Available options Film slitter to cut film to the requested width. Additional On roll perforator. Integrated or External Effect foiling device (OTF). Universal pallet positioning kit enables to load variety of different pallets into the machine. Hot knife option for perfect separation of thick, PET and Nylon films that eliminates flagging. Antistatic bar removes static charge from the separator to avoid thin sheets wrapping onto the rollers. Windows lamination kit. Set of chilling rollers placed between laminating unit and separator to reach high quality embossing or windows lamination. Automatic sheet stacker (pallet stacking).

Condition: excellent (used), Year of construction: 2013, Control system: UNILOG B6 Closing force: 4500 kN Distance between columns: 950 × 700 mm Lodpfxjytfqas Amzehn Minimum mold height: 330 mm Maximum mold height: 780 mm Screw diameter: 65 mm Injection pressure: 2070 bar Maximum injection weight: 980.9 g Injection unit: ServoElectric (Knodler) Injection speed: 400 mm/s Servo package S0 ServoPower package S1: hydraulic pump speed control for increased energy efficiency Integrated filter unit: Yes Ejector type: Electric Ejector force: 60 kN Ejector stroke: 180 mm Additional equipment: Air valve Cooling water flow regulator Digital interface for temperature controllers (control of up to 6 thermoregulators) Interface for nozzle needle shut-off control in the mould Interface for external hot runner controller Full integration for Wittmann W8xx series robot Quality control button Language: Polish

Condition: good (used), functionality: fully functional, overall weight: 8,000 kg, Year of construction: 2007, operating hours: 7,300 h, LEHNHOFF POWERTILT quick-hitch system Lhedps Ad Rc Eefx Amzsn Includes 3 buckets

Condition: used, Year of construction: 2016, Technical details: turning diameter: 26 mm Article: High-precision CNC lathe with linear cross slide Manufacturer: Benzinger Type: GOFuture B1 Yob: 2016 Machine was only used for reworking, i.e. only light machining work was carried out! Control: Siemens Sinumerik 840Dsl Main spindle: maintenance-free motor spindle Bar capacity: D26mm Loading and unloading device type IB Additional gripper system for placing the workpieces in the correct position on the unloading belt Lhedpfx Ajwbgcnsmzen Coaxial valve for coolant to the linear tools (3 pieces) Internal clamping device C-axis main spindle for digital control incl. transmit function Adjusting microscope 16x magnification Coolant supply through the spindle clamping cylinder, Sealing air, Speed increase of the motor spindle to 8. 0000 rpm Nordmann tool monitoring Profibus master interface Hinged belt conveyor Knoll Compact coolant device Knoll MBE interface Small fire extinguishing system Kraft & Bauer Network interface for teleservice A total of 2 similar machines are available - package sale possible Please, contact us for getting more information and pictures on mail(at) or subject to sale and mistakes *

Condition: ready for operation (used), Year of construction: 2013, A two-stage reverse osmosis system with a softener from Eurowater is available. 1) Two-stage reverse osmosis system Eurowater DPRO B1-2/2, year of manufacture: 2013, max. flow rate: 1.08m³/h, pressure pipes: stainless steel, pipe system: PVC, membrane diameter: 4 inches, machine dimensions X/Y/Z: approx. 730mm/700mm/2000mm. 2) Eurowater SM 42-F softener, year of manufacture: 2015, machine dimensions X/Y/Z: approx. 1000mm/500mm/1650mm. Documentation available. On-site inspection is possible. Ljdpfx Ajw Ryu Uemzehn

Condition: ready for operation (used), Year of construction: 1960, Available immediately ex works: Table drilling machine, Scharmann Type FB 125 b Year of manufacture 1960 Complete retrofit in 2020 Spindle 125 mm Metric 80 / SK 50 mounting Quill stroke 800 mm Table 1600 x 1200 mm Table traverse 2000 mm Installation height, spindle / table 1400 mm Table longitudinal travel 2500 mm Lhodpfo Aa Im Tox Amzen Spindle speeds 5 – 740 rpm, 7.5 – 1100 rpm With Wohlhaupter machining: 5 – 74 rpm 3-axis Heidenhain digital display Vertical head Large Wohlhaupter turning head Various other accessories Weight 21 tons Price: Euro 7,500.00 + VAT, ex works

Condition: used, AZO vacuum system with dosing screw Lhodpfx Amsygh Emozon Screw type: DFS 155x550 NE320 A22R Separator type: PKS 320-50 M A23R Year of manufacture: 2004 Equipped with quick cleaning system on dosing screw Equipped with various pneumatic valves and accessories for vacuum conveying See our other listings VMA Wekerom

Condition: used, Year of construction: 2014, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, feed rate X-axis: 25 m/min, working width: 3,200 mm, The machine has the following configuration: Number of machining units: 8 Pressure bar: With rubber belt Panel support stop: Present Overpressure: Present CNC positioning: Present Panel infeed trimming system: Present Number of units in the trimming area: 1 Number of units in the edge processing area: 6 Trimming unit Unit: Flush trimming unit Manufacturer/Model: RT30 Automatic time intervention: Present Motor power: 3.5 kW Speed: 9,000 RPM Edge banding Glue application system: EVA Heating lamps for edges: Present Edge magazine: Roller magazine Number of magazine positions: 6 Hot melt glue tank: Present Hot melt glue pre-melter: HM20 Pressure roller unit: Present Number of pressure rollers: 4 CNC positioning: Present End capping unit Manufacturer/Model: IT90-S Number of motors: 2 Maximum processing speed: 28 m/min Motor power: 0.65 kW Speed: 12,000 RPM Corner milling unit Manufacturer/Model: RF10 Ljdpfx Amsz Ekh Djzehn Number of motors: 2 Motor power: 1 kW Speed: 12,000 RPM Corner rounding unit Manufacturer/Model: AR30 Number of motors: 2 Automatic tool changer: Present Maximum processing speed: 18 m/min Motor power: 0.65 kW Speed: 12,000 RPM Edge scraping unit Manufacturer/Model: RB40 CNC positioning: Present Glue scraping unit Manufacturer/Model: RC20 Brushing unit Manufacturer/Model: SZ30 Number of motors: 2 Motor power: 0.37 kW Speed: 1,400 RPM TECHNICAL DETAILS Minimum panel height: 10 mm Maximum panel height: 60 mm Minimum panel length: 150 mm Minimum panel width: 100 mm Maximum panel width: 3,200 mm Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Maximum feed rate: 25 m/min MACHINE DETAILS Electrical connection power: 25 kW EQUIPMENT CE conformity The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 5062

Condition: used, machine/vehicle number: 008483, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Corner Rounding Unit: yes Max feed speed: 30 m/min Lhsdoyxmx Ropfx Amzon Maximum panel thickness: 60 mm Operating Units: 10 nr

Year of construction: 1997, operating hours: 30,000 h, condition: used, functionality: fully functional, OVERHAUL in 2022 New reinforced table – 660x960mm No support leg /it is available for mounting, but the program needs to be updated/. It has a new controller and can operate in sheet feeding mode. Price: 80,000 PLN Below are the specifications: Effective forming area 650 x 950mm Table stroke 300 mm Film width Up to 700 mm Installed power 15 kW Heating panel power 13 kW Ljdpfx Amjzt Sukezehn Pneumatic table lifting 0.4 MPa Compressed air consumption 5 m3/h Thickness of forming material 0.15-6mm Performance in cycles per hour 40 - 100 Weight approx. 250kg Dimensions: depth x width x height 1250mm x 2230mm x 2040mm

Condition: used, dryer dryair AZO LE 200, 200 m³/h, price: 3.950 €, contact: Herr Rainer Eckerle Lhsdpjycruofx Amzon

Condition: used, LVD 3m x 135Ton, 4 Axis CNC controlled, with LVD Cadman CNC Control, Type PBEB 135/30, S/N 31078, Year 2007, - No Tooling Lsdpfo Ad U Tusx Amzohn

Condition: used, Year of construction: 2011, Control Windows XP print area 550x500 mm Stencil Printer Stencil format: 737 x 737 mm PCB thickness: 6 mm Squeegee speed: 10-80 mm/s Squeegee pressure: 0-260 N Lhedpfsyqulnex Amzen The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, machine/vehicle number: 008247, Type of edging: Thin edge, Thick edge Gluing System: PUR Premilling Unit: yes Corner Rounding Unit: yes Lhedpfx Ajzbrn Uemzsn Grooving Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 9 nr

Condition: used, CNC 5-Axis HMC – Horizontal Machining Center, Milling Center, Manufacturing Center Manufacturer: LICON Model: Liflex 1266 PC B1 Year of construction: 2016, Commissioned: 2017 Equipped with SIEMENS 840D SL (Solution Line) CNC path control, with 5 simultaneously controlled axes Travel paths X: 1200 mm, Y: 660 mm, Z: 650 mm A-axis as swivel bridge +/– 135° (270°) B-axis 360° continuous Axis acceleration X + Y-axis 6 m/s² Axis acceleration Z-axis 9 m/s² Feed force X + Y-axis 7500 N Feed force Z-axis 10000 N Positioning tolerance (X/Y/Z) 0.008 mm A-axis swivel speed 180° rotation in 4 sec. Interference diameter on the swivel bridge max. 1400 mm Transport load on the swivel bridge max. 700 kg Tool holder HSK 63 Spindle speed max. 12,000 rpm, stepless Spindle power 37kW at 40% duty cycle Spindle torque at 40% duty cycle 85 Nm Maximum spindle torque 100 Nm Tool change time (chip-to-chip) approx. 3.7 sec. Tool diameter with adjacent slots occupied Ø 140 mm Tool diameter with adjacent slots free Ø 250 mm Maximum tool length 400 mm Maximum tool weight 20 kg Power supply 400 Volt, 50 Hz Connected load 80 kVA Compressed air connection 5-8 bar - LIFLEX MSP 80/63/85/12,000 motor spindle (output 37kW/40% duty cycle) with liquid cooling and recooling unit - 2-axis rotary tilting table LICON as B- and C-axis, with hydraulic axis clamping - Zero-point clamping system on the swivel axis turntable - Dual pallet changer, without pallets (these need to be newly sourced) - Media transfer of 5 single-action pressure lines for oil or air, for workpiece clamping on the pallets Hydraulic functions from 30-150 bar, with pressure monitoring (controllable via M-functions) - Tool changer with 30 tool positions, disc turret type - Machine designed for dry machining with minimal quantity lubrication (MQL) system - MQL-TSC, internal MQL lubrication supply through the spindle - Scraper belt chip conveyor, discharge height 1150 mm - Licon ECO-Mode (energy-efficient aggregate operation) Ljdpfxet Ac Efj Amzshn - Direct linear measurement system on all axes - Operating hours (control voltage on) ≈ 7,500 h Space required for operation L x W x H 9,000 x 5,000 x 3,800 mm Space required for transport L x W x H 6,100 x 4,400 x 3,600 mm Base machine weight approx. 21 tons Total weight: approx. 24 tons Very good condition

Condition: repair required (used), Year of construction: 2004, Schneider compressed air screw compressor defective System needs to be repaired. Machine is being sold cheaply because it needs to be repaired. Engine power: 11 KW Volume flow: 1500 liters/min Compressor pressure: 10 bar Ljdpfxjvmivce Amzshn Location: from warehouse 54634 Bitburg Machine is being sold as defective Without guarantee - without warranty -

Condition: excellent (used), Year of construction: 2018, operating hours: 15,339 h, functionality: fully functional, machine/vehicle number: 01584, TOMCO2 DE01RB-1500 industrial dry ice pelletizer – 680 kg/hour Professional TOMCO2 DE01RB-1500 Dry Ice Pelletizer, designed for industrial production of large quantities of dry ice. TOMCO2 is a well-known American manufacturer of industrial CO₂ and dry ice equipment. According to the manufacturer, these machines are developed for reliable, continuous production and can be used for, among other things, dry ice cleaning, the food industry, transportation, and other industrial applications. Technical specifications: Manufacturer: TOMCO2 Systems Model: DE01RB-1500 Machine: industrial dry ice pelletizer / extruder Production capacity: 1,500 lbs/hour / approx. 680 kg/hour Drive: hydraulic Hydraulic drive: 30 HP Electrical connection according to factory specifications: 230/460 V, 60 Hz, 3-phase Control: color touch screen / HMI Dimensions: approximately 305 × 132 × 206 cm (L × W × H) Lhodpfx Aez Az Hwemzon Weight: approximately 2,722 kg Designed for 24/7 production Interchangeable dies Possible pellet diameters for the 1500 series: 6, 9, 12, and 19 mm The machine can be adapted for different pellet sizes thanks to interchangeable dies. TOMCO specifies diameters of 1/4", 3/8", 1/2", and 3/4" for the 1500/3000 series, which is approximately 6, 9, 12, and 19 mm. Worldwide Shipping. Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, dry ice blasting machine for sale, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, used dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, die cleaning without disassembly, dry ice paint removal, dry ice coating removal, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice

Condition: used, Year of construction: 2011, BECKMANN VOLMER T-REX RF-B12200, year of manufacture: 2011, mulch tillage cultivator, working width: 4.60 m, weight: 3,450 kg, 16 spring tines, 3 tine rows, roller, toothed hollow discs, hydraulically foldable, depth adjustment, shear bolt stone protection, warning signs/lighting. Offer price including 19% VAT. The location may change; please inquire about the current location before visiting. Subject to changes, errors, and prior sale. Lhsdpfx Aj Ad Dhzjmzjn

Condition: used, machine/vehicle number: 008249, Type of edging: Thin edge, Thick edge Gluing System: PUR Premilling Unit: yes Corner Rounding Unit: yes Lhodpfx Ajzbrl Tsmzjn Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: used, machine/vehicle number: 008605, Type of edging: Thin edge, Thick edge Ledpfx Ajzqz Rismzohn Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 40 m/min Maximum panel thickness: 60 mm Operating Units: 9 nr

Condition: excellent (used), pressure: 3 bar, temperature: 134 °C, type of input current: three-phase, input voltage: 400 V, usable tank capacity: 2,500 l, Used Becomix production plant consisting of main mixer RW2500 and pre-mix vessel AB1200 for mixing, dispersing, homogenizing and emulsifying on an industrial scale. Originally used for sterile skin care products. Very good condition, complete factory overhaul planned (new seals, piping, pneumatics and control, homogenizer and drives overhauled), new stainless steel platform included. MAIN MIXER RW2500 • Working volume approx. 600–2,500 L, total volume approx. 3,458 L, 316L mirror polished • 0–3 bar, vacuum to -1 bar, up to 134 °C, jacket, TÜV approved • Anchor agitator with PTFE scrapers approx. 30 kW, rotor-stator homogenizer approx. 45 kW (5–25 m/s) • Recirculation line DN100, hydraulic lid Lhjdpj Ad H Iqsfx Amzsn PRE-MIX VESSEL AB1200 • Working volume approx. 400–1,200 L, turbo agitator, two-zone heating, transfer line FURTHER EQUIPMENT • CIP for both vessels incl. CIP rack, CIP/SIP capable, aseptic valves • Water ring vacuum pump approx. 200 m³/h, powder suction and liquid dosing • New Siemens PLC with touch panel, recipe control, GMP documentation SERVICE • Turn-key installation and commissioning available • 12 months warranty (excluding wear parts) Inspection in Weyhe near Bremen, Germany, by appointment. Questions or more photos? Simply send us an inquiry. Offer subject to prior sale by an independent dealer, not affiliated with the manufacturer.

Condition: used, Year of construction: 1993, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Performance data Pressure: 160 t Retraction force: 40 t Drawing cushion pressure: 630 kN Ejector pressure: 50 kN Total power requirement: 42 kW Machine weight: approx. 19.5 t Stroke and movement data Lhjdpfx Ae Aa Ngbsmzon Stroke: 300 mm Stroke speed: 400 m/min Stroke speed under load: 16–42 strokes/min Return speed: 350 mm/min Drawing cushion stroke: 100 mm Ejector stroke: 50 mm Table and ram Table size: 1,500 × 700 mm Ram clamping area: 1,200 × 560 mm Working area Overhang: 360 mm EQUIPMENT Drawing cushion Ejector