Used Baginboxfilling Funnel for sale (119)

Condition: used, Year of construction: 2013, operating hours: 4,867 h, functionality: fully functional, Equipment: Basic model DW 3060-C “Büffel” Central axle trailer chassis with 3 axles, road approval for 80 km/h Braking system incl. ABS and lighting according to EC directive 50 mm EC drawbar coupling incl. adapter shoe Hydraulically adjustable support legs Splash guard (fenders inside and on the side) Permissible total weight 25,000 kg Tires 385/65 R22.5 Mercedes-Benz diesel engine OM460LA, 315 kW at 2,000 rpm, meets exhaust emission standard EUROMOT IIIB Additional hydraulic connections 20 l and 70 l/min. (using a variable pump) Hydraulic preparation for comb basket system and drive mechanism Fuel tank 2 x 300 liters Roller length 3,000 mm, diameter 600 mm Trapezoidal teeth for roller (21 pieces) and comb (22 pieces) - form C (174 mm, armored) Gjdpfozn Icyox Aixoka Rear belt: belt length 5,500 mm, belt width 1,200 mm, hydraulically foldable, with anti-magnetic center section Longitudinal belt: belt length 3,300 mm, belt width 1,000 mm Centrally arranged lubrication strips 24-V electrical control system Reversal of the roller by means of an electric motor when the engine is stopped Automatically reversible fan wheel Chassis with level adjustment Acoustic start-up warning Paint finish: 2-component paint RAL2011 deep orange Additional equipment: BioPower package - Engine output: 360 kW, with reinforced planetary gearbox - Multi-tooth roller, length: 3,000 mm, diameter: 600 mm - Roller teeth 174 form C armored (42 pieces) - Comb basket system with fine strip basket - Transmission oil cooler Hydraulic drive mechanism Radio remote control NEODYM over-belt magnet for rear belt Frame for over-belt magnet Humidification system Funnel attachment plates foldable on both sides Delivery date will be agreed upon.

Condition: used, Year of construction: 2018, 1 x CNC-CONTROLLED DRILLING, GLUING AND DOWEL INSERTING MACHINE GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro) 400V, 3Ph, 50Hz complete in standard design with: - Support with linear guide consisting of: 1 x single-spindle horizontal drilling unit, 1.1 kW motor, tool speed selectable via operator software (3000/5000/8000 rpm) 1 x blow-out, gluing and dowel inserting station in reinforced design for dowels Æ 8 mm, dowel length 30 mm - fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 1300 mm, travel speed max. 78 m/min. - Z-axis, position via support table 5-40 mm programmable with NC-controlled Z-axis option - Dowel driving overhang of 7-20 mm, programmable with NC-controlled Y-axis option, drilling depth of 0-35 mm (with drill length GL 70 mm) is automatically set with driving overhang - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - GL/WATER selector switch for rinsing the glue system, 1 stainless steel container each for 5 kg glue and 5 l water - Control lamp for residual glue quantity display in the glue container - 1 side stop left, 1 side stop right and 1 center stop (all removable) - 4 start buttons for individual working with 1-4 workpieces - 4 pcs. Pneumatic inclined clamping cylinder 10° for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. suction funnel, connection Æ 80 mm - 1 pc. TCT control with: built-in industrial PC, incl. Soft PLC type Beckhoff TWINCAT, operating temperature range 0-50°C, TFT industrial display 15" resistive touchscreen, resolution 1024 x 768, CPU 2 GHz, 256 MB RAM, 2x network interface adapters, IDE hard disk, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE or GRID dimensioning, automatic workpiece mirroring and work step optimization, 4 work fields can be assigned with different programs, graphic workpiece display, parametric programming, 0-point shift, programmable work lists, error diagnosis with plain text OPTIONS: 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle 4 vertical inclined clamping cylinders 10° with holder, additionally, (total 8 clamping cylinders) 1 surcharge for machine bed length 1800 mm with working length 1800 mm 1 surcharge for: 1 horizontal drilling unit, motor 1.5 kW, with multi-spindle drilling head with 3 individually controllable drilling spindles, pitch 32 mm arranged in X-axis, tool speed 3000 rpm. (The standard working length is not reduced) 1 Y-axis NC-controlled, with recirculating ball screw and dynamic traversing speed of 300 mm/sec. The dowel driving overhang 7-30 mm and the drill hole depth 0-42 mm can be programmed via software. (with drill length GL 77 mm) for vertical drilling unit drilling from TOP, Y-axis position 5-42 mm 1 surcharge Y-axis NC-controlled position 5-62 mm instead of 5-42 mm 1 surcharge for: 1 vertical drilling unit drilling from TOP, motor 1.5 kW, with multi-spindle drilling head with 3 individually accessible drilling spindles, 32 mm pitch arranged in X-axis, tool speed 3000 rpm. Y-axis position 5-42 mm, workpiece length (Y) min. 130 mm, (the standard working length is not reduced) 1 Z-axis NC-controlled, with K Gjdpfxjxwaz Hj Aixoka

Condition: refurbished (used), functionality: fully functional, warranty duration: 12 months, power: 5.5 kW (7.48 HP), pressure: 50 bar, – Large 240 liters funnel – Designed for automatic dosing, twisting and filling of various mixtures under a vacuum – Portioning is precise and varies from 5 to 10000 grams – Made of solid stainless steel construction with built-in large rotor head – Equipped with microcomputer control for memorizing about 80 user programs – Productivity: 3000 kg. / hour – Pressure: 55 bar Gksdpfxjztccxo Aixea – Power: 5.5 kW

Condition: used, mileage: 32 km, power: 125 kW (169.95 HP), first registration: 08/2026, fuel type: diesel, overall weight: 3,230 kg, color: black, gearing type: automatic, number of seats: 4, total length: 5,580 mm, total width: 1,990 mm, total height: 1,860 mm, loading space length: 2,030 mm, loading space width: 1,840 mm, loading space height: 350 mm, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Internal number: 4098.NW26.SK21230 ---- Errors and prior sale excepted! SPECIAL EQUIPMENT * Tow hitch - 13-pole - for 3.5 t trailer load - 90° tailgate opening angle - height of the ball head approx. 50 cm (center) * Load compartment protection liner "sprayed" - 12-volt connection on the platform * Outdoor Package 2: Engine protection and tank protection, steel - Rear limited-slip differential, 100% * Auxiliary heater, programmable, with remote control * Winter Package 1: Leather steering wheel, heated - Front seats, heated * Kunath conversion: 3-way tipper (steel lightweight profiles, folding outer walls, ball-joint tipping mechanism with locking pin, hydraulic cylinder operable from the cab, folding step) - Snowplow Western Defender 72 (steel plow blade, 218 cm wide, PE scraper blade, additional headlights, remote control in the cab) - Electric salt spreader SALTDOGG (500 l volume, plastic funnel and container, Harting industrial plug connection) - Rotating beacon OTHER EQUIPMENT * ABS * Front towing hook * All-wheel drive, switchable * Tow hitch preparation kit * Audio system 44: Ford SYNC 4A * Exterior mirrors, electrically adjustable, heated, with indicators * Exterior mirror housings in vehicle color * Battery management system * Headliner made of fabric, light color * Overhead console, illuminated * Diesel particulate filter with SCR * Tachometer * Third brake light * ESP (Electronic Stability Program) * Electrically operated front windows * High beam assistant * Ford Easy Fuel * FordPass Connect, including eCall and Wi-Fi hotspot * Heated windshield * Floor mats: Carpet floor mats, front * Transmission: 6-speed automatic * Grille insert on the fender * Glove compartment with lid * Easy Lift tailgate * Tailgate handle, black * Rear window, heated * Interior mirror, automatically dimming * Instrument panel, digital 8 * Air conditioning, front * Headrests (2) * Radiator grille * Paint: Solid color paint * Load securing system with protective frame * Steering wheel: Multifunction steering wheel * Steering wheel: Vinyl steering wheel * Front center console, with integrated armrest * Engine cover * Fog lights * Package: Rear seat 18 * Package: Safety Package 2 * Package: Seat Package 36 * Package: Technology Package 19 * Upholstery: Fabric * Pre-Collision Assist * Wheel package 9: Alloy rims 7.5J x 17, 255/70 R17 * Wheel arch lining * Tire pressure monitoring system * Windshield wipers with rain sensor * Rear mud flaps * Side sill protection * Selective driving mode switch * Power steering * Start-Stop system * Socket: 12-volt connection in the rear * Rear bumper, painted in vehicle color * Front bumper, painted in vehicle color * Digital tachograph - preparation * Daytime running lights * Door handles, painted in vehicle color * Traffic sign recognition system * Tie-down points, external * Tie-down points, internal * Immobilizer * Central locking with remote control ... and more Gksdpfsynqbysx Aixoa ---- 1st owner. German version. Errors and prior sale excepted. 2 years factory warranty from date of initial registration (extendable on request). We will gladly take your vehicle in part exchange. Financing/leasing also possible without a down payment! Do you have any questions? We would be happy to advise you! Although existing checks are carried out, a deviation of the vehicle from the description above cannot be ruled out. We would like to point out that the vehicle description only serves for the general identification of the vehicle and does no

Condition: refurbished (used), HANDTMANN VF-830 F.P.A. PCM The machine after capital renovation. All bearings and sealings in this machine are new. Gksdsznt Hkepfx Aixja 3 months warranty for parts. Machine with clipper socket. Machine with loading. Instrumentation: grease, grease gun, rotor key, funnel key, holding device key, scraper, set of funnels and technical documentation. Delivery time: 2 weeks WITH: Linking gearbox AG-410 Holding device HV-414

Condition: new, Year of construction: 2025, GANNOMAT "MASTER 325" FRAME DOWEL AND MORTISE BORING MACHINE Specifically designed for staircase construction Complete in standard configuration according to price list 01/19/D, featuring: - Precision collet chuck for ER40 collets Ø 3-26 mm, incl. collets Ø 10 / 13 / 16 / 20 - Pole-switchable motor 1400/2800 rpm, 1.5 kW - Line laser with bracket - Boring unit, continuously rotatable from the front (65°-0°-65°) - Position setting via digital counter - Position adjustment for 2 levels, pneumatic (0-100 mm) - Maximum boring depth 200 mm - Precision indexing rail with 12 mm pitch with central detent and lateral adjustment 320 mm - Complete stop system consisting of: 1 center stop and 1 stop for oversized frames 1 stop rod, approx. 850 mm long (can be reversed from left to right) 2 flip stops - Mortising unit lowerable, with 2 program cams (400V, 3Ph, 50Hz, 1.5 kW) Gjdexdttpspfx Aixoka Extraction funnel, dust-tested, Ø 80 mm Double miter stop adjustable from 0°-60° Pneumatic clamping of the X-axis with on/off switch at the indexing handle Pair of auxiliary workpiece supports, swiveling (left and right) Clamp column re-positionable to the front Chassis with 4 wheels for easy machine movement 1 piece Collet extension Ø 20 mm, incl. collet for drill shank Ø 9 mm 1 piece Baluster drill bit Ø 25 mm, chrome steel, with centering tip Available: at short notice

Condition: new, Year of construction: 2025, CNC-controlled drilling, gluing, and dowel insertion machine Complete in standard configuration with: - Support with linear guide consisting of: 1 pc. single-spindle horizontal drilling unit, motor 0.65 kW, stroke 70 mm Tool speed selectable via operator software (3000/5000/8000 rpm) 1 pc. blow-out, gluing, and dowel insertion station for dowels Ø 8 mm, dowel length 25–50 mm - Fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 700 mm, max. traversing speed 95 m/min - Z-axis manually adjustable via mechanical digital counter, position on support table 5–40 mm - Dowel insertion projection adjustable from 7–20 mm via mechanical digital counter, drilling depth 0–35 mm (with drill length TL 70 mm), automatically set with insertion projection - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with viscosity from 150 to 350 mPas - Glue quantity steplessly adjustable via operator software - Selector switch GLUE/WATER to flush glue system, each with: 1 stainless steel container for 7.5 kg glue and 7.5 l water - Indicator lamp for residual glue level in glue container - 1 pc. left side stop, 1 pc. right side stop (all removable) - 2 pcs. start buttons for individual operation with 1–2 workpieces - 2 pcs. pneumatic angled clamping cylinders 10° for workpiece thickness up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. extraction funnel, connection Ø 80 mm - 1 pc. TCT controller with: Integrated industrial PC, incl. Beckhoff TwinCAT soft PLC, operating temperature range 0–50°C, 15" capacitive touchscreen TFT industrial display, operating system: WINDOWS 10 IoT LTSC (long term support channel) - Programming via menu-guided user software, drilling distances freely programmable with ABSOLUTE, RELATIVE, or GRID dimensioning, automatic workpiece mirroring and process optimization, 2 working fields assignable with different programs, graphical workpiece display, parametric programming, zero-point shift, programmable work lists, plain text error diagnosis Gkedpfxsw Sgm Hj Aixoa - Integrated options: - Electronic optical glue monitoring system G.I.C. (Glue Insert Control) for 1 pc. glue nozzle, art. no. 0470-0810 - 1 EASY CLEAN system, for automatic test glue shots before starting the drilling/gluing/dowel insertion program. E.C.S. for 1 pc. glue nozzle, art. no. 0471-Z010 - 1 single-spindle vertical drilling unit from ABOVE, 0.65 kW, (3000/5000/8000 rpm), position (Y) manually adjusted via mechanical digital counter Adjustable from 5–40 mm, drilling depth (Z) max. 30 mm (with drill length TL 57 mm) Workpiece thickness (Z) max. 50 mm, workpiece length (Y) min. 130 mm (incl. drilling depth compensation, e.g., for Häfele Minifix) Art. No. 0471-0830 - 4 vertical angled clamping cylinders 10° with mount, additional, Art. no. 0470-0850 Available: short notice

Year of construction: 2022, condition: as good as new (ex-display), AL-KO Grinding Table AST 1.5 BASIC The AL-KO Grinding Table AST 1.5 BASIC is the entry-level model in the AL-KO grinding table range. It is certified according to GS-HO-11 and bears the seal "Tested for wood dust according to BGI 739-1". Gkedjdqzhbspfx Aixea YOUR ADVANTAGES Accessible from 4 sides Can be loaded with up to 150 kg Manual, tool-free height adjustment with scale Recessed longitudinal sides for edge grinding Workpiece-friendly beech wood grating (removable) Funnel-shaped air duct to the extraction nozzle TECHNICAL DATA AST 1.5 BASIC Extraction nozzle 140 / 160 mm Required extraction capacity 1,500 m³/h Negative pressure at the nozzle at 22 m/s 1,000 Pa at DN140 mm 700 Pa at DN160 mm Adjustable working height from 735-1,015 mm Working area (W x L) 946 x 1,500 mm Dimensions (W x L) 1,000 x 1,600 mm Weight approx. 73 kg

Condition: as good as new (ex-display), Year of construction: 2026, - NEW - Manufacturer: Ganner Gannomat Type: SELEKTA 253 220 V, 1 phase, 50 Hz complete in standard version with: - Fully automatic electronic control with program selector switch COILING-GLUING-INSERTING - Dowel feed via electronic vibratory feeder with potentiometer for stepless adjustment of the dowel feed rate - Automatic dowel diameter and dowel length control with Auto-DL-Select system (automatic ejection of incorrect dowel lengths +/- 5 mm into the collection container) - Closed gluing system with 6 bar glue pressure via glue nozzle for glues with a viscosity of 150 to 350 mPas - Stepless electronic glue quantity adjustment with potentiometer via time preselection through electronic control - Selector switch GLUE/WATER for flushing/cleaning the gluing system with EasyClean function button (automatic cleaning program for glue hose and glue nozzle via spray funnel and dirty water collection container) - Control light for glue residue level indicator in the glue container - 1 stainless steel container for 5 kg of glue and 1 stainless steel container for 5 l of water Gkedodwi Rkopfx Aixja for flushing/cleaning - 4 rollers for moving the machine including 1 gun for dowels Ø 8 mm, dowel length 25 - 40 mm Insertion allowance 7 - 20 mm Air connection: 6 bar Price ex warehouse 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2014, Used Machine Year of manufacture: 2014 Condition: The machine has been factory-overhauled by Ganner Features and Technical Specifications: Complete standard configuration including: - Support with linear guide consisting of: 1 single-spindle horizontal drilling unit, 0.65 kW motor, 70 mm stroke Tool speed selectable via operator software (3000/5000/8000 rpm) 1 blow-out, gluing, and dowel-driving station for dowels Ø 8 mm, dowel length 25–50 mm - Fully automatic, electronically controlled central lubrication - X-axis NC-controlled, with working length 1300 mm, travel speed max. 105 m/min. - Z-axis manually adjustable via mechanical digital counter, position adjustable via support table 5–40 mm - Dowel drive-in overhang adjustable from 7–20 mm via a mechanical digital counter; drilling depth from 0–35 mm (for drill bit length GL 70 mm) is automatically adjusted with the drive-in overhang - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - GLUE/WATER selector switch for flushing the glue system, each with: 1 stainless steel tank for 7.5 kg of glue and 7.5 l of water - Indicator light showing remaining glue levels in the glue tank - 1 left side stop, 1 right side stop, and 1 center stop (all removable) - 4 start buttons for individual processing of 1–4 workpieces - 4 pneumatic 10° angle clamping cylinders for workpiece thicknesses up to 80 mm, workpiece length (Y) min. 70 mm - 1 extraction funnel, connection Ø 80 mm Gjdezlbrvspfx Aixjka - 1 TCT control unit with: Built-in industrial PC, including Beckhoff TWINCAT soft PLC, operating temperature range 0–50°C, 15-inch capacitive TFT industrial touchscreen, operating system: WINDOWS 7 - Programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE, or GRID dimensions, automatic workpiece mirroring and operation optimization, 4 work areas assignable to different programs, graphical workpiece display, parametric programming, zero-point offset, programmable worklists, error diagnosis with plain text Optional equipment: - 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle - 1 Z-axis with NC-controlled, dynamic positioning for height adjustment of the drilling and dowel-driving station (programmable from 5–40 mm), travel speed max. 30 mm/sec. - 1 single-spindle vertical drilling unit drilling from the TOP, 0.65 kW, (3000/5000/8000 rpm), position (Y) manually adjustable via a mechanical digital counter from 5–40 mm, drilling depth (Z) max. 30 mm (with drill bit length GL 57 mm), Workpiece thickness (Z) max. 50 mm, workpiece length (Y) min. 130 mm (including drilling depth compensation, e.g., for Häfele Minifix) - 4 vertical 10° angle clamping cylinders with mount - 1 keypad with mount Availability: available shortly Location: DE-63934 Röllbach

Year of construction: 2022, condition: excellent (used), functionality: fully functional, We offer this very good PMH (Plasticmaschinen handelsgesellschaft) PMH DS25-32LD twin-screw extruder, year of manufacture 2022. Manufacturer: PMH Plasticmaschinen handelsgesellschaft Model: PMH DS25-32LD twin-screw extruder Year of manufacture: 2022 Condition: very good Category ID: 452 Type: PMH twin screw extruder PMH Compounder DS25-32LD, with co-rotating, segmented twin screws ("good as new") The machine is designed with an 11 kW three-phase drive and a distribution gearbox for 95 Nm at 400 rpm. The mounted safety coupling is combined with a cut-off contact in case of overload. The maximum permissible melt pressure is 150 bar and is monitored by a pressure sensor. Individual housings allow you to configure the machine flexibly according to your requirements. The segmented screws with a diameter of 25 mm are designed in the standard version with several kneading zones and a decompression zone (atmospheric degassing). A blind cover for the decompression zone is included in the scope of delivery. Ceramic heaters with thermal sensors and cooling fans control the temperature. A stainless steel funnel is mounted on the filling opening. The electrical control system is integrated into the machine frame. All heating zones are switched contactlessly via solid-state relays. A swivelling touch panel is available for user-friendly operation. The head plate is equipped with a mass pressure sensor. Gksdpfx Aioznkx Doxea The mass pressure monitoring system switches off the drive when the set maximum mass pressure is exceeded. tool adapter with 4-hole nozzle plate Options: Vacuum pump for the degassing zone (only atmospheric degassing offered) 3 metre water bath Air-Knife Used strand granulator If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: new, overall weight: 3,500 kg, Year of construction: 2025, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ - We deliver the right vacuum suction system for your every need! - Worldwide delivery/Dealer inquiries welcome! Internal Number: #502 The images shown are sample images. Actual equipment and color may vary. STS V-2.0 Gjdpfezi Ir Rsx Aixska Tank • 2,000 L capacity tank • Hot-dip galvanized tank • Tank slightly inclined to the rear for easier cleaning • Lateral cleaning port on the tank to remove contamination or blockages without opening the tank lid • Tank lid opens fully to the passenger side and is secured with hook bolts • Standard dual safety levels installed to prevent compressor damage • Siphon separator – overflow protection with 2 balls and viewing glass • Pressure gauge on suction assembly with protective bracket • Mechanical fill level indicator with color scale Engine and Compressor • MEC 3000 vacuum compressor, 3,500 L air flow • Maximum vacuum: -0.8 bar (continuous operation at -0.5 bar) • Maximum overpressure: 0.49 bar • Maintenance-free V-belt drive for vacuum compressor • Honda GX 390 industrial engine – electric starter, oil sensor, control panel with ignition switch, battery, and tank • Internal suction hose to prevent damage within the engine unit • Silencer for vacuum compressor with oil collection • Stainless-steel heat shield above exhaust • 1 liter of biodegradable compressor oil, stored in oil bottle holder • 5L fuel canister in holder • Standard long-neck funnel for oil changes and refilling • All engine components and accessories stored in lockable engine compartment • Engine compartment made of aluminum and powder-coated in preferred color Chassis • Self-supporting chassis, fully hot-dip galvanized • Tandem low-loader chassis, 3.5t • Track width matches standard passenger cars and vans for optimal driving stability • Lowest possible center of gravity for the suction tank • 2 axles, each with 1,750 kg load capacity and independent suspension from a reputable manufacturer • Continuous welded V-drawbar • Robust metal fenders with integrated lamp housings • Stake holders for quick securing of suction hoses using rubber bands • Storage options for tools and accessories Vacuum Tank • Overrun brake with automatic reverse feature • Automatically locking ball coupling • Reinforced jockey wheel • 13-pin electrical connector Connections and Hoses • 2x suction hoses (3") 5m long with Perrot couplings • 1x suction lance 3" (1500mm long) • 1x Perrot connection (3") at the bottom of the tank lid • 1x Perrot connection (3") on the right side in the direction of travel Custom builds and special equipment available on request – Check our offers! For more details or photos, please contact us directly. A wide selection of other vehicles for SALE or RENT can be found at: Subject to changes, prior sale, and errors. The buyer is responsible for independently verifying the condition and features of the item. The sale is made exclusively according to our Terms & Conditions and with exclusion of any warranty.

Year of construction: 2013, condition: used, Herbort 159 CVM Vacuum Homogeniser – 2013 Manufacturer: Herbort Model: 159 CVM Year of construction: 2013 Machine has been recently overhauled Description High-quality Herbort 159 CVM Vacuum Homogeniser for the production of homogeneous and dispersed food products. This machine is specifically designed for mixing, dispersing and homogenising liquid to highly viscous products under vacuum, resulting in a superior product quality and extended shelf life. The vacuum system removes air and oxygen during processing, preventing foaming and oxidation while preserving flavour, colour and vitamins. Ingredients can be added directly into the vessel or through the side funnel. The product continuously circulates through the homogenising unit until the desired consistency is achieved before being discharged. This machine is equipped with a modern Siemens PLC control system, frequency-controlled drive and a climate-controlled electrical cabinet. Suitable for - Mayonnaise - Dressings - Ketchup - Sauces - Dips - Soups - Emulsions - Remoulade - Other liquid and viscous food products Technical specifications - Container capacity: 320 litres - Batch size: 200 litres - Transfer capacity: 500 L/min (water) - Homogenising unit: 11 kW - Mixing speed: 3,000 rpm - Noise level: 70 dB - Machine weight: approx. 850 kg - Vacuum mixing and homogenising system - Stainless steel construction - Siemens PLC control - Frequency inverter - Climate-controlled electrical cabinet Advantages - Vacuum processing prevents oxidation and foaming - Excellent product consistency - Gentle product handling - Hygienic stainless steel construction - Easy cleaning and maintenance - Suitable for continuous industrial food production Condition: Good used condition. Available immediately from stock at STC Food Solutions. Gsdpezh Um Eofx Aixeka For more information, technical details or an inspection appointment, please contact us. Manufacturer: Herbort Model: 159 CVM Year of construction: 2013 * Container capacity: 320 litres * Transfer capacity: 500 L/min (water) * Homogenising unit: 11 kW * Machine weight: approx. 850 kg

Condition: used, mileage: 2,500 km, first registration: 04/2024, overall weight: 2,700 kg, Year of construction: 2024, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ - We deliver the right vacuum suction system for any application! - Delivery worldwide / Dealer inquiries welcome! Internal number: #382 The images shown are sample images. Actual equipment and color may vary. STS V-1.5 Vacuum Suction Tank Trailer Tank - 1,500-liter tank capacity - Fully hot-dip galvanized tank - Tank is slightly inclined to the rear for easier cleaning - Side rinsing port in the tank allows removal of contaminants or blockages without opening the tank lid - Tank lid opens completely toward the passenger side and is secured with hook screws - Standard two safety stages installed to prevent damage to the compressor - Siphon separator - Overflow with 2 balls and sight glass - Pressure gauge on suction assembly with protective bracket - Mechanical level indicator with color scale Engine and Compressor - Vacuum compressor MEC 3000 with 3,500 l/min air capacity - Vacuum max. -0.8 bar (continuous operation at -0.5 bar) - Overpressure max. 0.49 bar - Maintenance-free V-belt drive for the vacuum compressor - Industrial engine (gasoline) - Electric starter, oil sensor, control panel with ignition lock, battery, and fuel tank - Internal suction hose to prevent exposure within the engine unit - Silencer for vacuum compressor with oil collector - Stainless steel heat shield above exhaust - 1 liter of biodegradable compressor oil stored in oil bottle holder - 5-liter gasoline canister in holder - Standard long-neck funnel for changing and refilling engine oil - All engine components and accessories stored in a lockable engine box - Engine box made of aluminum, powder-coated in the desired color Gkodpfx Aiszit Uqsxja Chassis - Self-supporting chassis, fully hot-dip galvanized - Low-bed tandem chassis, 2.7t GVW - Track width matches cars and Sprinter for optimal driving characteristics - Lowest possible center of gravity for the suction tank - 2 axles, each with 1,350kg load capacity and independent suspension from a renowned manufacturer - Continuous welded V-drawbar - Robust fenders with metal lamp housings - Stake brackets for quick securing of suction hoses with rubber straps - Storage options for tools and accessories Suction Tank - Overrun brake with reverse-automatic - Automatically locking ball coupling - Reinforced jockey wheel - 13-pin electrical connector Connections and Hoses - 2x suction hoses (3") 5m each with Perrot couplings - 1x suction lance 3" (1,500mm long) - 1x Perrot connection (3") at the bottom of the tank lid - 1x Perrot connection (3") on the right side in the direction of travel Notes & Service - Worldwide delivery possible - Dealer inquiries welcome - Special constructions & custom adaptations on request For further detailed information and/or photos, please contact us directly. A wide selection of other vehicles for purchase or rent can be found at: Specifications subject to change, prior sale, and errors excepted. The buyer is responsible for independently verifying the condition and features of the goods. Sale is exclusively subject to our general terms and conditions with exclusion of any warranty.

Condition: used, maximum load weight: 34,880 kg, overall weight: 40,000 kg, axle configuration: 3 axles, first registration: 10/2009, loading space volume: 34 m³, Year of construction: 2009, Equipment: ABS, Stock no. 5835 34,000 liter Spitzer tank trailer with 4,000 liter Vogelsang pump / trailing axle / aluminum rims ---- * Manufacturer: Spitzer * Type: SF2734/2P * First registration: 10/2009 * Gross vehicle weight: 40,000 kg * Unladen weight according to vehicle registration document: 5,120 kg * Payload: 34,880 kg * Axles: 3 x BPW / 3rd axle is a trailing axle / disc brakes * Suspension: Air suspension * Tires: 385/65 R 22.5, approximately 50% tread, on aluminum rims * EBS Wabco * Color: Blue/White * Operating temperature from -20 degrees to +80 degrees * 2 funnel cones * 2 baffle plates * 3 dome lids, screw-on * Vogelsang 4000 liter rotary lobe pump, type VS 136-2106 * Sight glass on the front left * 2 outlets, left + right Gedpfx Aisy T Dlqsxoka * Flushing connections with 3 valves to flush both outlets separately * Access with walkway on the left, pneumatically operated from below * Individual fenders * Open hose storage on the right * Full load supports * Loading pressure gauge * LED reversing lights * Work lights on the side * 1st owner German trailer!! German documents!! 1st owner!! Note regarding possible errors in the advertisement: Despite careful preparation of the advertisement, occasional errors may have crept into the text or the information provided. We assume no liability for errors, changes, or interim sales. All information is provided without guarantee. Please contact us to verify details or clarify any further questions.

Condition: used, Handtmann Vacuum Filler -Type: VF 608 Gkedpfxezlcwge Aixea -Power: 3 kW -Filling capacity: up to 2000 kg/h -Portioning and unpacking: up to 400 portions/minute -Portioning range: 5 to 100,000 g -Year of production: 2009 -Linking device included -Additional funnels included -Busch vacuum pump -With technical documentation -Power supply: 400V 50Hz 3Ph -Dimensions: 1200 x 1220 x 2040 mm -Netto weight: 475 kg -Condition: Used in very good condition, ready to work

Condition: good (used), Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding smoke filter, welding smoke extraction, smoke gas extraction fan, filter system, Cartridge dust extraction system -Filter system: -Filter frame: 2190/1460/H2080 mm -Vibration motor: 0.25 kW -Funnel frame: 2235/1440/H2520 mm -Opening: Ø 390 mm / 500 x 220 mm -Individual components: see photos -Weight: 200 kg / 590 kg Gsdpfxjwrb I He Aixeka

Condition: excellent (used), Year of construction: 2000, Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding smoke filter, welding smoke extraction, smoke gas extraction fan, filter system, Cartridge dust extraction system -Filter system -Filter frame: 2135/2135/H2030 mm -Vibration motor: 0.55 kW -Funnel frame: 2100/2130/H2330 mm -Discharge gear motor: 2.2 kW 8.7 rpm -Opening: Ø 250 mm / 250 x 220 mm -Individual components: see photos, without extraction fan -Weight: 320 kg / 890 kg Gkodpfx Ajw Nhbmsixea

Condition: good (used), Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding smoke filter, welding smoke extraction, smoke gas extraction fan, filter system, Cartridge dust extraction system Gksdpfsw Hz T Sex Aixea -Filter system: -Filter frame: 1400/1995/H2100 mm -Shaking motor: 0.25 kW -Funnel frame: 1400/1995/H2350 mm -Opening: Ø 500 mm / 500 x 220 mm -Individual components: see photos -Weight: 220 kg / 521 kg

Condition: used, Combination conveyor, fan with connection to the hopper, fan conveyor, combination conveyor, AirMove - components, injector conveyor, injection conveyor -Injector conveyor: injection conveyor with distributor, without fan -Inlet funnel: 175 x 180 mm -Distribution radius: 200 mm -Discharge pipe: Ø 60 m -Drive motor: Euronorm 0.09 kW Gedpfshg Rg Rsx Aixoka -Number: 3x conveyors available -Price per piece -Dimensions total: 1630/500 / H1230 mm -Weight: 57 kg

Condition: used, maximum load weight: 35,000 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 04/2024, next inspection (TÜV): 04/2027, loading space length: 12,213 mm, loading space width: 2,475 mm, loading space height: 2,300 mm, loading space volume: 70 m³, total width: 2,550 mm, total height: 3,856 mm, Year of construction: 2024, Equipment: ABS, STAS 3-axle AGRICULTURAL walking floor SANH 70 cbm First registered 05/ 2024, in new condition Dimensions i.L. (LxWxH) 12,213 x 2,475 x 2,300 mm Volume approx. 70 cbm Empty weight only 7,010 kg Fifth wheel height approx. 1,250 - 1,300 mm Total height approx. 3,850 mm Aluminum short chassis over the axles SAF axles with large disc brakes, 430 mm, reinforced "Off-Road" version Wabco Trailer EBS with RSS stabilization system 1st axle LIFT AXLE 3rd axle self-steering Tires 6-fold 385/65 R 22.5 ALUMINUM drop supports full load (2x 10 t.) 4x LED work lights Gedpfxjv Dz Ixj Aixjka Cargofloor moving floor agricultural version with 15 boards 6 mm smooth End caps aluminum welded RADIO remote control Side wall panels complete welded (grain version) rear portal support pivots at the top hydraulic connections at the top and also at the bottom of the support legs roof crossbar reinforced version, galvanized integrated grain discharge funnel at the rear, outlet opening downwards, operation from the side RENTING is the new BUYING, also available from us as a full-service rental-----

Condition: refurbished (used), Year of construction: 2016, HANDTMANN VF-608 plus F,P.A. Gjdpfx Aiopy Edloxoka The machine has been completely renovated using only original parts. 3 months warranty for parts. All seals, bearings and siemering are new. Servomotors, gears and vacuum pump after complete regeneration. New control panel. Machine with a clip-socket. Accessories: grease, grease gun, impeller wrench, funnel wrench, scraper, set of funnels and technical documentation. The machine is included with the AG-410 linking gearbox. Delivery time: ready to delivery.

Condition: used, Plant for the conditioned milling of malt into grist and for the subsequent storage of the grist. In a conditioning screw conveyor, the malt is moistened with water at 60°C before being ground into grist in the 6-roll mill (Künzel, 1966). The conditioning water is pre-treated in a water treatment system (Täuber, 2019). The grist is collected in a funnel-shaped grist hopper mounted on legs and fed into the grist transport system. Additional title: 6-roll mill for conditioned dry grinding; built between 1966 and 2019 Capacity: 1200 kg/h Features: 6-roll mill; conditioning screw; water treatment Gsdpoziy U Dsfx Aixeka

Condition: like new (used), Year of construction: 2000, operating hours: 25,000 h, functionality: fully functional, Longitud de entrada // Intake length: 2200 mm Anchura de entrada // Intake width: 2000 mm Longitud de rotor // Rotor length: 2000 mm diam. rotor // rotor diam.: 495 mm n.º de cuchillas // n. of knives: 56 (60x60) velocidad del rotor // rotor speed: 125 rpm potencia motor // main motor power: 132 kW voltaje // voltage: 400 V frecuencia // frequency: 50 Hz Peso de la máquina // machine weight: 14000 kg Gkjdpfx Aiei Elyljxja * Máquina especialmente diseñada para la trituración de plásticos, los rodamientos del rotor están completamente aislados. * Máquina completamente reconstruida; 1 año de garantía ó 2000h, lo que antes suceda * Incluye: - Rotor de repuesto - Sujetador superior; ideal para la trituración de residuos voluminosos de baja densidad - Soporte de acero - Tolva de alimentación - Cuadro de control eléctrico - Planos de implantación disponibles, asi como plano de soporte de máquina y tolva de alimentación - Manual de instrucciones & esquemas eléctricos Includes: - Machine supplied with bridge breaker (upper feeder); suitable to shredd bulky waste with low density - Machine fully refurbished; 1 year guarantee or 2000h, whatever happens first - Machine specially designed for shredding of plastic waste. - Steel support - Infeed funnel - Electric control pannel - Dimmensional drawings available in Acad for the machine, funnel and steel support - Operation & maintennace mannuals available

Condition: like new (used), Year of construction: 2005, operating hours: 20,000 h, warranty duration: 24 months, rotor diameter: 500 mm, rotational speed (max.): 165 rpm, year of last overhaul: 2024, MAQUINA COMPLETAMENTE RECONSTRUIDA // MACHINE FULLY REFURBISHED Longitud de entrada // Intake length: 1250 mm Anchura de entrada // Intake width: 2962 mm Longitud de rotor // Rotor length: 2962 mm diam. rotor // rotor diam.: 500 mm nº de rotores // nº of rotors: 2 off n.º de cuchillas // n. of knives: 2x27 (80x80) velocidad del rotor 1 // rotor 1 speed: 95 rpm velocidad del rotor 2 // rotor 2 speed: 75 rpm potencia motor 1 // main motor 1 power: 75 kW potencia motor 2 // main motor 2 power: 55 kW voltaje // voltage: 400 V frecuencia // frequency: 50 Hz Peso de la máquina // machine weight: 16000 kg * Máquina completamente reconstruida (rotor y contracuchilla completamente recargado); 1 año de garantía ó 2000h, lo que antes suceda * Incluye: - Soporte de máquina - NUEVO - Tolva de alimentación - NUEVO - Cuadro de control eléctrico - NUEVO Gsdpeg D Ullsfx Aixska - Planos de implantación disponibles - Manual de instrucciones & esquemas eléctricos Includes: - Machine fully refurbished (included complete hard facing of rotor); 1 year guarantee or 2000h, whatever happens first - Machine specially designed for shredding of plastic waste. - Electric control pannel - NEW - Steel support for the machine - NEW - Infeed funnel for the machine - NEW - Dimmensional drawings available in Acad for the machine - Operation & maintennance mannuals available