PMH twin screw extruder25 mm - 32 l/d
PMH Plasticmaschinen handelsgesellschaft PMH DS25-32LD twin-screw extruder

Name: PMH Plasticmaschinen handelsgesellschaft PMH DS25-32LD twin-screw extruder
Brand: PMH Plasticmaschinen handelsgesellschaft
Price: 35000 EUR
Availability: InStock

EXW ONO plus VAT

€35,000

Year of construction

2022

Condition

Used (fully functional)

Location

Kecskemét

PMH twin screw extruder25 mm - 32 l/d PMH Plasticmaschinen handelsgesellschaft PMH DS25-32LD twin-screw extruder

PMH Plasticmaschinen handelsgesellschaft PMH DS25-32LD twin-screw extruder

Basic data

Machine type:: PMH twin screw extruder25 mm - 32 l/d

Manufacturer:: PMH Plasticmaschinen handelsgesellschaft

Model:: PMH DS25-32LD twin-screw extruder

Year of construction:: 2022

Condition:: excellent (used)

Functionality:: fully functional

Price & Location

EXW ONO plus VAT

€35,000

Location:: Kecskemét, Hungary

Call

Details about the offer

Listing ID:: A223-89367

Update:: 02.11.2026

Description

We offer this very good PMH (Plasticmaschinen handelsgesellschaft) PMH DS25-32LD twin-screw extruder, year of manufacture 2022.

Manufacturer: PMH Plasticmaschinen handelsgesellschaft
Model: PMH DS25-32LD twin-screw extruder
Year of manufacture: 2022
Condition: very good
Category ID: 452
Type: PMH twin screw extruder

PMH Compounder DS25-32LD, with co-rotating, segmented twin screws ("good as new")

The machine is designed with an 11 kW three-phase drive and a distribution gearbox for
95 Nm at 400 rpm.
The mounted safety coupling is combined with a cut-off contact in case of overload.
The maximum permissible melt pressure is 150 bar and is monitored by a pressure sensor.

Individual housings allow you to configure the machine flexibly according to your requirements.
The segmented screws with a diameter of 25 mm are designed in the standard version with
several kneading zones and a decompression zone (atmospheric degassing).
A blind cover for the decompression zone is included in the scope of delivery.
Ceramic heaters with thermal sensors and cooling fans control the temperature.
A stainless steel funnel is mounted on the filling opening.

Chodpfxoznkx Dj Acqod
The electrical control system is integrated into the machine frame.
All heating zones are switched contactlessly via solid-state relays.
A swivelling touch panel is available for user-friendly operation.

The head plate is equipped with a mass pressure sensor.
The mass pressure monitoring system switches off the drive when the set
maximum mass pressure is exceeded.

tool adapter with 4-hole nozzle plate

Options:
Vacuum pump for the degassing zone (only atmospheric degassing offered)

3 metre water bath

Air-Knife

Used strand granulator

If you have any questions or need more information, feel free to send us a message or give us a call.

Seller

Last online: A week ago

Registered since: 2026

1 listing online

Call

Send inquiry

Telephone & Fax

+36 20 38... show

Add to watchlist

Share Report listing

These listings may also fit your interest.

Listing

Aeroplex Fluidized Bed Opposed Jet Mill 400 Hosokawa Alpine 400 AFG

Waldkraiburg

8,180 km

Aeroplex Fluidized Bed Opposed Jet Mill 400
Hosokawa Alpine400 AFG

€70,000

ONO plus VAT

Call

Condition: ready for operation (used), functionality: fully functional, color: grey, Year of construction: 1988, Aeroplex fluidised bed counterjet mill 400 AFG The plant is fully functional and can be inspected on site. Trial milling can be carried out in advance depending on the material. In 2005, the plant was modernised and converted to load cells. Electrical control system: Simatic S7-300 The plant consists of the following units: Csdpox T Ar Nsfx Acqohd 1. Mill 2. Raw material filling unit 3. Air filter 4. Electrical switchgear

See details

Listing

ZSK 133 – twin-screw extruder Werner &Pfleiderer ZSK 133

Subotica

8,752 km

ZSK 133 – twin-screw extruder
Werner &PfleidererZSK 133

Call

Year of construction: 2001, condition: good (used), For sale: an industrial twin-screw extruder, Werner & Pfleiderer ZSK 133, now known under the Coperion brand. This machine is designed for processing and compounding plastic materials, especially PP granules, polyolefins, masterbatches, filled, and modified materials. The extruder was manufactured in 2001 and purchased used in 2015 in working condition. However, it has not been used in our production since the purchase. It has been idle since then and is being sold due to lack of use. Key specifications: capacity up to 4 t/h, main electric motor 1100 kW, voltage 690 V, frequency 50 Hz, motor speed 1492 rpm, screw speed up to 400 rpm, maximum pressure 200 bar, heating power 137 kW, 6 heating zones, dimensions 3535 × 900 × 500 mm. Chjdpozc I Igefx Acqjd The extruder includes a melt pump, an underwater granulator with a die and a set of knives, a cooling system for a water bath, an oil unit with electric heaters for heating the granulation die, and hydraulic units for operating and locking the shears. Suitable for factories involved in compounding, PP granule production, masterbatch production, regranulation, and processing of large volumes of plastic.

See details

Listing

Germany

7,870 km

Fine Pulverizing Mill
Alpine630 UP

Call

Listing

Single screw extruder REIFENHAUSER 90-33

Portomaggiore

8,383 km

Single screw extruder
REIFENHAUSER90-33

€16,000

EXW ONO plus VAT

Call

Listing

Twin-screw extrusion line Krupp Werner & Pfleiderer (Coperion) ZSK 50 Mc 900

Nürnberg

8,019 km

Twin-screw extrusion line
Krupp Werner & Pfleiderer (Coperion)ZSK 50 Mc 900

Call

Year of construction: 1999, operating hours: 47,973 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 20472666, Complete compounding and granulation system based on a co-rotating twin-screw extruder, Krupp Werner & Pfleiderer ZSK 50, manufactured in 1999. The system is suitable for compounding, processing, and regranulating thermoplastic materials. Previous process: ABS recycling The system consists of: Twin-screw extruder ZSK 50 Mc 900 with a process length of 36 L/D Chedpfxszn Um Eo Acqjd Drive power: 181 kW Screw speed: up to 1200 rpm including water ring vacuum pump and water cooling including Autotherm temperature control unit including strand die head Multi-component dosing and material feeding system from Colortronic - Graviblend (manufactured in 1999), gravimetric, with 5 gravimetric feeders, including vacuum material conveying with Busch vacuum pump, type RC 0160, suction via suction lances Downstream: Ettlinger melt filter, type ERF 200 with 1250 cm² filter area for up to 900 kg/h Water bath, 4.0 m, including heat exchanger Granulate air blower Scheer strand granulator SGS 200-E5, manufactured in 2011 Classification vibration screen Cooling screw conveyor Control cabinets included. The system is currently still assembled and can be inspected under power until the end of September.

See details

Listing

Micronizing mill Bachiller JET-MILL MSB305

Seva

7,941 km

Micronizing mill
BachillerJET-MILL MSB305

Call

Listing

Glane

7,607 km

Industrial Wastewater Treatment System

€11,950

ONO plus VAT

Call

Condition: good (used), functionality: fully functional, High-quality industrial wastewater treatment system specifically designed for powder coating and metal finishing facilities. Chodpezi N Dhjfx Acqsd This system efficiently treats process water generated during pre-treatment, rinsing, and cleaning operations. It helps reduce operating costs, minimizes environmental impact, and supports compliance with environmental regulations. Key Features: Suitable for powder coating and surface treatment lines Efficient removal of heavy metals, suspended solids, oils, and contaminants Reliable and robust industrial design Low operating and maintenance costs Easy operation and maintenance Ideal for continuous industrial use Complete installation available, including tanks, pumps, piping, dosing system, and control panel (depending on configuration) The system is in good working condition and can be inspected while operational by appointment. Please contact us for technical specifications, additional photos, or a customized quotation. Worldwide shipping can be arranged.

See details

Listing

Neuman & Esser ICM 48 Neuman & Esser ICM 48

Arnsberg

7,711 km

Neuman & Esser ICM 48
Neuman & Esser ICM 48

Call

Listing

Germany

7,870 km

Fine Impact Mill
Alpine630 UP

Call

Year of construction: 1980, condition: ready for operation (used), An Alpine fine impact mill from the chemical industry with an AEG motor is available. Rotor diameter: 630mm, grinding fineness range: 0.25mm-2mm, grinding capacity: approx. 250kg-400kg/h, machine dimensions X/Y/Z: approx. 2000mm/1400mm/2600mm, weight: approx. 800kg. Motor manufacturer: AEG, motor type: eAM 180 MR 4 Ex, year of manufacture: 1981, power: 15kW, speed: 1420rpm, power factor: 0.82, motor weight: 150kg. The conveying unit in the red frame is not for sale. An on-site inspection is possible. Cjdpfeyyy Nxsx Acqjhd

See details

Listing