Used Berg & Schmidt Gbs 250 Super Autocut 2-Stufig for sale (83,701)

Condition: new, capacity 90 degrees: round 255 mm capacity 90 degrees: square 240 mm 300 x 180 saw band length 2.765 x 27 x 0,9 mm mm table height 870 mm band speed 18 - 110 m/min Control CNC total power requirement 1,5/1,8 kW weight of the machine ca. 0,63 t dimensions of the machine ca. 1,8 x 1,85 x 1,85 m Miter band saw, fully automatic GBS 255 Super VA-I CNC • miter left 45° automatic operation • miter left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start detection) • Frame and gearbox made from one piece, very quiet cut and very low vibration • Removable chip tray (disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • High performance positioning with incremental encoder (CNC) c. • Top access to the saw, material and feed unit • Hinged safety cover Hsdpfx Aqjd Iipzjgefn • Fine feed adjustment • Semi-auto. Cut! • Optimize work processes with CNC control Possibility to enter various parameters such as quantities and material lengths, automatic calculation of the cutting channel • CNC control for 10 different saw programs with 99 sub-programs for different lengths and quantities, e.g. 1 cutting program with various section lengths • Automatic feed unit (CNC) via ball roller spindle incremental feed with automatic length compensation. Adjustable for section lengths of 2 mm to 9,999 mm, remainder length 170 mm.

Condition: new, cutting diameter 240 mm saw band length 2730 mm cutting width 270 mm cutting speed 37 + 74 m/min dimensions of saw-band 2730 x 27 x 0,90 mm 240 mm 230 mm 270 x 230 mm 210 mm 200 mm 200 x 210 mm 130 mm 130 mm 130 x 160 mm total power requirement 1,2 kW weight of the machine ca. 0,3 t dimensions of the machine ca. 1,6 x 1 x 1,7 m high-quality processed metal band saw with 2 band speeds, miter up to 60°, automatic cooling and AutoCut feed system - for sawing solid material and profiles execution * High-quality processed and equipped metal band saw for saw cuts best quality * For sawing solid material and profiles made of steel, stainless steel and aluminium * Miter cuts up to 60 degrees left * Saw band speed adjustable in 2 stages * Frame and gearbox made from one piece, very quiet and low-vibration cut * Easy, clear miter adjustment with scale * Quick release vice with quick release lever for easy handling * Length stop Hsdpfx Aqshhzl Hsgofn * Carbide saw band guide * Electrical monitoring of band tension, band breakage and saw band cover. The saw only runs if there is no fault in the monitoring system. * Ergonomic industrial handle * Electric automatic coolant control * AutoCut system with hydraulic cylinder, feed control, spring pack and limit switch * Large machine bed * Machine base in sheet steel construction with front door AutoCut system * Automatic saw frame lowering via the hydraulic cylinder continuously adjustable feed and limit switch at the end of the cut. * High-speed lowering of the saw frame from the rest position to the workpiece, then switch to normal saw feed (e.g. for scribing). * Manual operation: The hydraulic cylinder works as a brake cylinder (e.g. for release). Due to the brake cylinder, the saw can be moved in any Position to be positioned.

Year of construction: 1986, condition: ready for operation (used), A complete slitting line Burghardt & Schmidt including a Grindingmaster is available. Uncoiler load capacity: 3000kg, expansion range: 375mm-420mm, knife inner/outer diameter: 80mm/180mm, separator disc dimensions X/Y/Z: 130mm/80mm/1.5mm, recoiler load capacity: 2500kg, usable width: 250mm, cutting performance: 0.1/0.3/0.5/0.8, cuts: 25/20/12/25, material strength: 1800N/m². System dimensions X/Y/Z: approx. 11000mm/5600mm/2000mm, weight: approx. 8000kg. Dokumentation vorhanden. An on-site inspection is possible. Hsdpfx Aqoxxziujgofn

Condition: like new (used), Year of construction: 1991, functionality: fully functional, power: 30 kW (40.79 HP), input voltage: 200 V, type of input current: three-phase, pressing force: 250 t, table width: 760 mm, table length: 2,700 mm, overall weight: 35,000 kg, punching force: 250 t, Equipment: documentation/manual, safety light barrier, AIDA NC2-250(1) 250t eccentric press in excellent condition /ctA2/ Manufacturer: AIDA Hfjdpfju Dxb Tsx Aqgjn Type: NC2-250(1) Push force: 160t Year of manufacture: approx. 1991 Stroke length: 170mm Distance above table: (adjustable) 280-400mm Table size: 2700x760mm Bear size: 2100x700mm Electrical power: 3x200V(!!), 30kW - Japanese standard Net weight: 35000kg Size: 2760x2800x3980mm Automatic greasing system. Automatic cutting oil dosing - RAZIOL EST-02 Optionally with disc winder and straightener.

Condition: excellent (used), Professional industrial pad printing machine from the renowned Swiss company Teca-Print AG. The device is designed for printing on components made of plastic, metal, wood, and other technical parts. Robust industrial construction, ideal for series production, technical marking, advertising prints, logos, and product marking. The machine is in good visual and technical condition. Technical Data: Manufacturer: Teca-Print AG Model: TPU 250 Type: pad printing machine Power supply: 220 V Frequency: 50 Hz Pneumatic control Foot-operated pedal Adjustable worktable Heavy-duty industrial build Manufactured in: Switzerland Serial No.: 9708305 Applications: - printing on plastics - marking metal components - technical prints - logos and advertising Hedpfx Aqez Sm Ddsgjfn - series production - marking industrial parts Includes: - Teca-Print TPU 250 machine - documentation / manuals - accessories as shown in the photos

Condition: good (used), Year of construction: 1997, I sell the double mitre saw OMGA TI2500 Super. Cutting length 230 - 2500mm Cutting width max. 1500mm Cutting height max. 115mm Saw cutting aggregate main blade + scoring blade each side. Fully tilting - 45 up to + 45 ° Hedpfxoxtxh De Aqgofn 2 Motors x 4,0kW (5,5 HP) Good condition. Available immediately.

Condition: new, cutting diameter 280 mm saw band length 3370 mm cutting width 350 mm dimensions of saw-band 3370 x 27 x 0,9 mm 280 mm 250 mm 350 x 200 mm Hfedpfxeivuqte Aqgsn 240 mm 220 mm 230 x 220 mm 170 mm 150 mm 170 x 100 mm saw tape speed 37 + 74 m/min total power requirement 1,8 kW weight of the machine ca. 0,6 t dimensions of the machine ca. 1,5 x 1,7 x 2,0 m

Condition: used, Year of construction: 2014, We are selling a used Schmidt Keil Vario snow plough KLV 24, year of manufacture 2014. Scraper bars made of steel, 20 mm, with shock absorber strip and stabilizing spring. Adapter group for Multicar, Ausa, Leiber. Glide plates, splash guard, side deflector, plough lighting, marker lights. If you have any further questions regarding the equipment, please feel free to contact us. Storage location: 99428 Weimar. Hfedpfeyq Awljx Aqgjn

Condition: used, Year of construction: 2021, Suitable for (model): Unimog, truck, UNIMOG. We are selling one used Schmidt Stratos S 30 - 24 VEP 490 spreader, manufactured in 2021. STRATOS S30 Schmidt silo spreader STRATOS S 30 (24), 3.0 m³ stainless steel container Auger conveyor ("S") Protective grid 40x40 mm, steel (for S/F/D25-30) Folding roof Profi, stainless steel (for 25-30) Container in orange RAL2011 (standard) Auger cover (for S17 - S30) Stainless steel ladder (standard for stainless steel spreader) Rear cover, stainless steel FS preparation (additional valve on the hydraulic block) Drive via vehicle hydraulics ("V") Connections at the front of the unit (for V) Hydraulic couplings, leak-proof ISO16028, P=Size 2(M) R=Size 3 Hfsdpoyq Ar Asfx Aqgjn Control system Evolution Professional "EP", incl. electric adjustment of the spreading pattern Premium spreading disc "490" (spreading width 2 - 10 m) Ball joint frame for Unimog 405.125 Support feet (4 pcs.), 3 t., crank drive in the center, incl. lateral supports Rotating beacon (1 piece) Warning tape red-white, at the top of the container Marking "Winter service" (German) Contour marking according to UN ECE R48 Splash guard 2,000 mm Minimum flow connection on the valve block, without pressure gauge Flow rate detection with load sensing pump (for V) Location: 93095 Hagelstadt

Condition: ready for operation (used), Year of construction: 1989, Immediately available from training center: Universal Milling Machine Horizontal - Vertical WMW Auerbach Type FW 250 x 1000 / 2 Year of manufacture: 1989 Table: 1250 x 250 mm Table load capacity: 1250 kg Travel X/Y/Z: 700 / 400 / 500 mm Heidenhain 3-axis digital readout SK 40 Spindle speeds: 55 – 2800 rpm Feeds: 10 – 630 mm/min, stepless Vertical head Hodpfx Aqoz Ixliogefn Horizontal milling device Drive power: 6.3 kW Weight: 2.5 t Offered at EUR 2,000 – plus VAT, ex location

Condition: good (used), Year of construction: 1989, machine/vehicle number: 0172, Offer 25286 Hodow Ei Tdspfx Aqgofn Technical specifications: - Saw blade dimensions: 400 x 35 x 2.0 mm - Cutting range - 90° round: approx. 252 mm - flat: approx. 250 x 160 mm - square: approx. 210 x 210 mm - 45° round: approx. 160 mm - flat: approx. 150 x 150 mm - Automatic material feed - Max. vise opening: 265 mm – miter-adjustable vise - Coolant system - Drive: 400 V / 0.65 / 1.6 kW - Required space: approx. W 1400 x H 950 x D 1700 mm - Weight: approx. 600 kg

Condition: good (used), functionality: fully functional, saw blade diameter: 350 mm, Saw motor: 1.5 / 1.8 kW Saw blade size: 350 mm 2 saw blade speeds: 1400 / 2800 rpm Miter angle stepless: ±45° Hfsdjzzvwrjpfx Aqgon

Year of construction: 1998, condition: used, Ring diameter: 200mm, bobbin length: 550mm, connected load: 13kW, mains connection: 380V, three-phase connection: N + PE, an on-site inspection is possible. Hfedpfxsz Dkire Aqgsn

Condition: new, 1000 mm 1000 mm 1200x1000 mm saw band length 11300 x 80 x 1,3 mm table height 790 mm band speed 14 - 60 m/min total power requirement 18 kW weight of the machine ca. 9,0 t dimensions 5,0 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction Hfedpfst Eacgsx Aqgsn to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Year of construction: 2011, condition: ready for operation (used), 2 complete precision press systems are offered. Press force: 220kN, stroke: 100/12mm, operating pressure: 3/6bar, tool holder X/Y: approx. 350mm/300mm, safety distance: 355mm, overrun time: 0.07s, control system SCHMIDT PressControl 500: control type: PRC 500, incl. operating panel with display and keypad, two-hand control according to EN 574 Type III B. Accessories: machine frame with integrated safety device BGR 500 inspection, machine weight: 800kg, inspection possible by arrangement. Hedpoy S A I Uofx Aqgefn

Condition: used, mileage: 20,050 km, power: 55 kW (74.78 HP), first registration: 11/2021, fuel type: diesel, driver cabin: other, gearing type: other, Year of construction: 2021, operating hours: 2,532 h, number of seats: 2, Equipment: air conditioning, * Compact sweeper Swingo 200+ Basic - push-type 2-brush system * Hydro-pneumatic suspension * 4-wheel steering (4WS) switchable * 2 brushes D=850mm * Rotating beacon (non-folding) * Pressurized water system with dirty water pump * 2 work lights on the cabin roof and 1 LED work light for the suction nozzle * Air conditioning * Cruise control * Warning triangle, first aid kit, safety vest - according to EN 471 * Swingo transport speed 50 km/h - including additional disc brake system on the rear axle * Folding rotating beacon * Wheel chock with holder * Engine: VM R 754 ISE 5 - EuroMot 5 - 4-cylinder - 55 kW (75 hp) EuroMot5 homologation incl.: DOC + DPF (Diesel Oxidation Catalyst + Diesel Particulate Filter closed system) * 500-hour service interval (instead of standard 300 hours) with special ASH Long Life oil * Hydropneumatic comfort suspension on front and rear axles - front and rear axle suspension via hydraulic cylinders and nitrogen accumulators - high driving comfort and best driving safety. Note: System is not maintenance-free * Air-suspended driver's seat including headrest * 3-point safety belt for driver - mounted on the cabin rear wall - Option 174590 Headrest for driver's seat is required * 2-point belt (lap belt) for passenger * DAB+ radio, CD, MP3, USB connection and Bluetooth hands-free system * Rear area monitoring with monitor and camera * Camera for suction nozzle monitoring * Reversing warning signal can be switched off (night mode) * Steering wheel knob * 12V socket (cigarette lighter socket) in the cabin (max. 15 A) * Professional plate brush control for 2-brush system (independent control) * C-shaped brush arms for 2-brush system * Mixed brush bristles (steel / poly-plastic) Hsdpfx Aezcfyteqgefn * Coarse dirt flap rubber in the suction nozzle made of 17mm material instead of 10mm * Preparation for subsequent installation of the hand suction hose * Standard paint finish RAL 9016 white * LED rotating beacon (instead of the standard rotating beacon) * Manual central lubrication, all lubrication points combined on two blocks Other: * Trade-in and purchase of vehicles and machines possible. * Sale price excluding transport and delivery. * No liability for printing and typographical errors. * Errors, changes and prior sale reserved. * Offer is subject to change. * Photos may vary. Price applies to the existing condition. * All information without guarantee.

Condition: excellent (used), Year of construction: 2012, Pressing force 28 kN Min./max. operating pressure 3 / 6 bar Stroke 12 mm Electrical connection 220 Volt Hodpfx Aqez Hv U Sogofn Overhang 130 mm Table 200 x 150 mm

Condition: used, Year of construction: 2016, Pneumatic press Manufacturer: Schmidt Type: 25-100-3K Year of manufacture: 2016 Nominal force: 12.5 kN Stroke: 100 mm Includes SCHMIDT PressControl 75 in the two-hand safety version Hfsdpsz Hlzhsfx Aqgon Weight approx.: 45 kg 51026ä

Condition: used, Year of construction: 2000, grinding diameter 500 mm grinding length 1000 mm centre height 250 mm -major maintenance -New table geometry -partial painting of the interior grinding wheel equipment LEFT 400x63x127mm (standard) Hjdpsxzk Niofx Aqgjfn grinding wheel equipment RIGHT 300x40x127mm Internal grinding unit Ø120mm for HF spindles CNC control KELCO 120 C-axis for non-circular grinding. Kel-Poly B-AXIS: CNC-controlled B-axis KELCO 120: v constant 35m/s or 45m/s High-frequency internal grinding spindle Operating unit for MFV and MFZ spindles Hydraulic quill retraction for the tailstock NO micro-adjustment on the tailstock Spring-loaded quill insert Top table cooling Standard workpiece headstock MK 5 DIN 55026 size 5" Micro-adjustment for the standard workhead Dressing device on the lower table Active longitudinal positioning KELPOS, MARPOSS, mounted on the grinding head Tool measuring system KELSET, MARPOSS MARPOSS gate sensor Measuring control MARPOSS Minialsar prepared Paper belt filter

Year of construction: 1997, condition: ready for operation (used), A transfer press line is offered, consisting of a Gräbener double-column transfer press including a feed unit and a Fecker decoiler-straightener combination with strip feed. 1) Gräbener GSET 2-250-280-315 double-column transfer press, year of manufacture: 1997, condition: operational, nominal force: 2500kN, nominal force stroke: 5mm, nominal energy capacity: 45kJ, slide stroke: 315mm, max. stroke rate: 50strokes/min, slide adjustment: 125mm, number of connecting rods: 2, shut height between bolster and slide: 800mm, bolster dimensions X/Y/Z: 2800mm/1150mm/200mm, slide area X/Y: 2800mm/900mm, max. die cushion stroke: 160mm, die cushion force: 88kN, machine dimensions X/Y/Z: approx. 5200mm/2700mm/5450mm, dimensions including sound enclosure X/Y/Z: approx. 7200mm/4700mm/5610mm, weight: approx. 55000kg. 2) Feed unit, condition: partially operational. 3) Fecker decoiler-straightener combination with strip feed, max. load capacity: 3000kg, max. coil outside diameter: approx. 1500mm, strip pass line height: approx. 1240mm, overall height: approx. 2740mm, width of the decoiler section: approx. 1680mm, length of the strip transfer table: approx. 3500mm. Documentation available. Inspection possible by arrangement. Hfjdpszrhhqsfx Aqgon

Year of construction: 2002, condition: excellent (used), Manufacturer: GBS Year of manufacture: 2002 Weight: 350 kg Working length: 3300mm Pipe thickness: 12 and 15 mm Hsdpfx Aqomv Hz Isgefn 2 heads, force: 2t

Condition: used, Year of construction: 1969, press capacity 250 t spindle diameter 160 mm ram stroke range 180 mm stroke speed 71 Hub/min column daylight 450 mm table surface area 560x450 mm ram surface 450x400 mm total power requirement 12 kW Hfedpfjyt R Epex Aqgen weight of the machine ca. 9 t The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Circular saw in very good condition Hfedpfx Aot Uk Rmjqgon

Condition: new, Year of construction: 2025, Push feed optimizing saw with automatic loading chain system for the complete optimization of the wood and the elimination of the defects. COSTCUTTING OPTIMIZING SAW Superpush 250 is a true technological evolution of traditional cutting methods. It is able to increase productivity considerably, reduce staff usage to a minimum, and improve wood yield. EXTREMELY ROBUST Very robust and reinforced steel structure. Group to move up and down all the loading chain system. The chain system is of high level of quality of size 5/8”. Pusher carriage dimensions mm. 300x345x25. Toothed belt width 50 mm. with 33 steel strips inside. TECHNOLOGICALLY INNOVATIVE Electronic system composed by a computer connected in real time to a last generation numeric control. Software running on Windows Complete with 5 qualities managing. 22” LED colour screen. Tele-service trough internet. + Macro Excel included. FAST Total optic system. Brushless servo driver motor for the pusher. Intelligent pressure beam Adjustable cutting speed. RELIABLE AND SAFE Transmission system with sliding on double hardened and rectified guides. Hfodpfx Aqjfhk I Esgjn “Skf” sliding bearing with double anti-dust protection and automatic lubrication. Electric box separated from the machine and self-standing. Independent pneumatic regulations to adapt to different types of working. Safety closing protection on back side.

Condition: used, Year of construction: 2014, The portal-type hydraulic press is designed for bending or straightening, as well as for processing finished welded components, and for disassembling mining machinery and other equipment. It is used in mechanical, production, and repair plants, etc. Manufacturer: PATENTUS S.A. Hfsdpfjhktq Ajx Aqgsn Type: PAT 300-2/250-2 Year of manufacture: 2014 Technical specifications: Dimensions: width: 4200x3140 mm, height: 3600 mm Weight: 25000 kg Table surface: 4200 mm x 2140 mm Diameter of gate cylinder 1: 2 x 300 mm Diameter of gate cylinder 2: 2 x 250 mm Force of gate cylinders 1: 2 x 1768 kN Force of gate cylinders 2: 2 x 1228 kN Maximum clearance: 1240 mm Stroke of working cylinders: 600-660 mm Gate travel: 1420 mm Equipment: - two gates - table - four working cylinders - gate movement cylinder - working cylinder movement cylinder - power unit with T-100/30 pump (year 2006, overhauled in 2011) Technical condition: used, requires inspection.