Used Brooks Asyst Wafer Front-End Module 300Mm for sale (27,961)

Condition: used, Year of construction: 2011, operating hours: 34,809 h, functionality: fully functional, TORNOS SA EvoDECO 16a with Elite 220 bar feeder Includes: - Base machine, 10 axes, FANUC 16i-TB - Synchronous 16mm rotating chuck including drive - C1 axis function - Polar coordinate function for C1 or C4 axis - S6 motor (8,000 rpm) for a maximum of 3 rotating tools on the tool system (X1-Y1), not synchronized with S1 - S2 motor (8,000 rpm) for a maximum of 3 rotating tools on the tool system (X2-Y2) - S3 motor (8,000 rpm) for a maximum of 3 end-facing rotating tools - Tailstock with positioned stop - C4 axis function - Limitation of the clamping stroke of the tailstock (system for fine adjustment of the clamping diameter) - Part extractor with adjustable pneumatic cylinder, including cleaning of the tailstock chuck with oil (maximum pneumatic cylinder stroke 150mm) - S5 motor (8,000 rpm) for a maximum of 6 rotating tools (synchronizable with S4) - 3-color light beacon, configurable (colors: yellow, red, green) - Centralized lubrication system, BIJUR type - Adaptation for operation without chuck (maximum part length 50mm) (requires one of options 0937 to 0941) - TB-DECO ADV programming software MOVABLE HEADSTOCK S1 (Z1) - 12,000 rpm - Right-hand bar rotation - Adaptation for SCHAUBLIN F22 chuck (no. 76-0071) TOOL SYSTEM (X1-Y1 / X2-Y2) - 2 independent carriages with 5 positions - 2 independent S2, S6 motors END TOOL - Independent carriage with 4 positions - Independent S3 motor INDEPENDENT TAILSTOCK (Y4-Z4) - 12,000 rpm - Adaptation for SCHAUBLIN F20 chuck (no. 76-201) COUNTER OPERATIONS (X4) - 6-position stations (3 end-facing and 3 transverse) MISCELLANEOUS - Device for evacuating and receiving parts outside the machine - Variable flow coolant pump - Lighting lamp - Electrical interface for fire protection system, compliant with CE and EMC standards NUMERICAL CONTROL - FANUC 16i-TB numerical control - 10" color screen - TB-DECO ADV programming software (version 750-005 + 750-0710) Kedpfxszd Shle Ai Rjdr EQUIPMENT - Adaptation for F13 chucks - Long-type turning tool holder, 12x12mm or ½ inch section, right-hand bar rotation - Adaptation for chucks - Front clamping adjustment system for F13 chucks - Front clamping adjustment system for F20 chucks - Electrical interface 2004 (maxi2) including 2 sockets for adapting up to 2 peripherals of choice - Swiss 230 V socket - Oil mist extraction device

Condition: good (used), Year of construction: 2014, XEIKON 3050 including front end system Year of Manufacture: 2014 _____ Product Description:  Bar code modules  Xeikon PMS-Large  Rewinder XRN 500 single shaft, incl. Tension control  Maintained: Gold maintenance contract  Operating hours: very low estimated max. 300h  Condition: As good as new Kdedpfjv Iqimox Ai Rer Machine Specifications and Equipment:  Print Process: Electrophotographic with LED array, dry toner, rotary printing with variable print length  Color Configuration: 5/0 simplex (CMYK and White)  Color Control: Integrated densitometer  Toner: Xeikon QA-I  Resolution: 1200 x 3600 dpi with 4-bit LED spot  Print Width: 508 mm (20.0 inches)  Print Length: Variable, 0-55 m (0-180 ft)  Substrate Feeding: Roll-fed; suitable for paper, paperboard, self-adhesive or pressure-sensitive labels (paper, PP, PET, vinyl, co-extruded film), transfer substrates  Substrate Width: 250-516 mm (9.8-20.3 inches)  Substrate Weight: 40 to 350 gsm (27 lb text to 122 lb cover)  Substrate Thickness: 40 to 550 μm (1.6 mil to 21.65 mil)  Web Alignment: Active, based on infrared and ultrasonic sensors  Print Speed: 9.6 m/min (31.5 ft/min) _____ Accessories Included:  Manuals  Keys  Etc. _____ Technical and Optical Condition: • Technical: 9/10 (checked and in excellent running condition) • Optical: 9/10 (cleaned and ready for immediate end-user deployment) _____

Condition: excellent (used), CATALOG NUMBER: 6969 TECHNICAL DATA Circular saw: - Max saw blade diameter: 300mm - Spindle: 30mm - Max cutting height: 60mm - Saw blade adjustable front/back - Motor: 2.4kW Milling machine: Tenoning spindle: - Spindle diameter: 40mm Kodpfjzc Iv Dsx Ai Rjdr - Spindle working height: 190mm - Lockable spindle - Max cutter diameter: 360mm - Motor: 7.5kW - 2 spindle speed options - Material hold-down - Adjustable side carriage (up/down, front/back) - Angle stop - Pull-out table support - Manual carriage feed - Extraction port diameters: 80mm, 160mm - Dimensions (L/W/H): 1910x1960x1800mm, Weight: 830kg – Polish production – DTR (Technical Documentation) included – Upper control panel – Used tenoning machine, in very good condition Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated according to 4.2 PLN/EUR conversion rate (In the event of substantial exchange rate fluctuations, the price may be subject to change)

Condition: used, mileage: 72,000 km, power: 105 kW (142.76 HP), first registration: 05/2019, fuel type: diesel, overall weight: 3,500 kg, color: grey, gearing type: mechanical, emission class: euro6, number of seats: 7, Year of construction: 2019, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, Mercedes Benz Sprinter 314 CDI - Flatbed - Double Cab German vehicle from Mercedes Benz Bank. New TÜV (German vehicle inspection) certificate. Excellent condition. 7 seats. Special features: 13-pin trailer socket, Audio system: MB audio system with radio, USB, and Bluetooth hands-free system, Bluetooth hands-free system, passenger-optimized gear selector console (without storage compartment in the center console on the right), chassis: stabilization level II, ladder rack behind the cab, smoker's package, spare wheel holder under the end of the frame including jack, seats in the cab: double passenger seat, reinforced front axle, jack. Kdedpfxszvk H Rj Ai Rjr Additional features: Storage compartment above the windshield, storage compartment below the dashboard on the passenger side, towing eye at the rear, adaptive brake light, airbag on the driver's side, traction control system (ASR), display for windshield washer fluid level, exterior mirrors electrically adjustable and heated, both, outside temperature display, headlining in the cab, automatic activation of headlights, body/superstructure: flatbed double cab standard, communication module (LTE) for digital services, fuel tank: main tank 71 liters, steering wheel (steering column mechanically adjustable), headlight range adjustment, truck registration, marker lights on the sides, Mercedes-Benz emergency call system, engine 2.1 liters - 105 kW CDI CAT, wheelbase 3665 mm, low emissions according to Euro 6 emission standard, seatbelt system with warning system (driver's side), seat cover/upholstery: fabric, seats in the cab: driver's seat adjustable, non-woven battery 70 Ah, service interval display Assyst, heat-protective glazing, permissible total weight 3.50 t. * Sales consultant information * + * AN APPOINTMENT IS REQUIRED FOR A TEST DRIVE OR INSPECTION. * + * Trade-in and financing possible. * Input errors cannot be ruled out. * Please check the equipment on the vehicle. Errors and omissions excepted. Subject to prior sale.

Condition: new, power: 140 kW (190.35 HP), fuel type: diesel, overall weight: 5,500 kg, color: white, gearing type: automatic, number of seats: 1, total length: 7,336 mm, total width: 2,001 mm, Year of construction: 2025, Equipment: air conditioning, central locking, had accident, parking heater, soot filter, Sprinter 519 4x4 with M3 Preparation Optional partition wall and choice of single or double passenger seat can be supplied upon request. 4 identical vehicles available Special equipment includes: - Active Distance Assist DISTRONIC - Exterior mirrors without integrated indicator - Front side indicator lamps - Omission of load compartment/sliding door - Tachograph controls located front under headliner - No passenger side airbag - No load compartment partition wall - No seat in cab, right side - No lashing eyes - Exterior noise reduction features - Speed limiter set at 100 km/h - Grab handles on A-pillars - Partial LED rear lamps - Hold function - Interior: instrument panel air vents - Flip lid for storage compartment - Dashboard charging package (additional USB ports and 12V socket) - Cable duct at rear portal - Cable duct on sidewall - Heated steering wheel - Fog lights with cornering function - Programmable special module - Park package with reversing camera - Interior rearview mirror - LED High Performance headlights - Rear and front mud guards - Driver’s seat heated - Driver’s seat with lumbar support - Comfort suspension seat for driver - Low seat base for driver’s seat - Rear door step - Rear underride guard - Cab heat insulation - Additional electric auxiliary air heater - Additional water heater Additional features: - 3rd brake light - Overhead storage above windscreen - Storage compartment below passenger dashboard - Adaptive brake light - Driver airbag - Acoustic package - Hill-start assist - Towbar wiring - trailer socket electrics - Power folding exterior mirrors - Electrically adjustable & heated exterior mirrors (both sides) - Blind spot assist for exterior mirrors - Outside temperature indicator - DAB tuner (digital radio) - Load compartment ceiling light with door contact - Automatic headlight activation - Rear right entry grab handle - Grab handle for sliding door at partition wall - Safety assist: turning assistant - Safety assist: active brake assist - Safety assist: active lane keeping assist - Safety assist: start info assistant - Safety assist: Attention Assist (drowsiness detection) - Safety assist: Intelligent speed assistant - Safety assist: breakdown management - Safety assist: crosswind assist - Digital tachograph Kdsdezvxn Aopfx Ai Rjr - 250A alternator - 9-speed GTronic automatic transmission - Rear doors (opening angle 270 degrees) - Body/type: high roof box with extended rear overhang - Instrument cluster with color display - Communication module (LTE) for digital services - Main fuel tank: 93 litres - Steering column adjustable (manual) - Multifunction steering wheel - Truck registration (N1 category) - Side marker lights - Mercedes-Benz emergency call system - Engine: 2.0 L – 140 kW CDI Euro 6 - MBUX multimedia system (10.25" touchscreen) - 4325 mm wheelbase - Tyre pressure monitoring system - Reversing camera - Euro VI emissions standard - Windscreen wipers with rain sensor - Seatbelt warning system (driver and passenger side) - Fabric seat upholstery - Engine start/stop system - Mid-dashboard USB charging port - 92 Ah AGM battery - Navigation pre-installation (for MBUX) - Remote Service Plus pre-installation - Heat-insulating glass (windscreen with top band filter) - Permissible gross weight: 5.2 t - Rain sensor We can...

Condition: good (used), You are bidding on: a high-quality sheet metal shear and bending machine from a very reputable manufacturer – Schechtl. Features of the machine: Sheet metal shear HT 200 Capacity: 1.25mm steel, aluminum, etc. Cutting length: slightly over 2m Holder for round bar (properly attached to the machine; if desired, we also have round bars in various lengths available as an option) Extendable front support Invoice with VAT shown Kodpozgua Ajfx Ai Rodr Bending machine KS – Capacity: 1mm steel, aluminum, up to approx. 1.5mm Bending length: slightly over 2m Foot clamp Optional: back gauge or beading device Attachment rail Round rollers and other rails According to §25a UStG The machines are in good used condition and are ready for immediate use. They come from a private owner and a small business (50/50). Important! Optionally, you can find and purchase many machines and machine accessories, such as various rails, back gauges – everything related to sheet metal and steel processing, including bending machines, sheet metal shears, drilling machines, round machining machines, slitting and profiling machines – accessories (beading device, round rollers for gutter production, back stop, etc.), as well as other hand tools and spare parts from many top manufacturers in our shop. Please feel free to contact us if you have any questions. You will receive an invoice according to §25a UStG, which includes the sales tax – differential taxation. Free loading is possible – weight approx. 750 kg and 650 kg. Inspection and testing are possible and welcome after prior telephone arrangement. Payment in cash upon collection. Take advantage of our experience and expertise; we will be happy to advise you. Collection by the buyer (or by a shipping company commissioned by the buyer) should take place within 10 days after the end of the auction. Location: 97249 Eisingen, approx. 3 minutes from the A3 and A81 highways. Article number: Bending machine KS & HT.

Condition: used, Year of construction: 2006, operating hours: 68,702 h, machine/vehicle number: LC624, Used KRONES water bottling line - 32.000 BPHTechnical Specifications & Performance DataThis complete used bottling line is engineered for high-efficiency PET bottle handling and beverage production. Manufactured by Krones in 2006, it delivers reliable performance for industrial packaging operations at scale. The line integrates blow molding, filling, labeling, coding, shrink wrapping, handle application, palletizing, and pallet labeling, creating a robust end-to-end production solution suitable for second hand markets seeking dependable uptime and consistent output quality.Production speed: up to 32,000 bottles per hourBottle formats: Compatible with 0.5L and 1.5L bottle formatsContainers: Designed for PET bottle handlingManufacturer (core equipment): KronesYear of manufacture (core line): 2006Operating hours recorded: 68702Control platform: Siemens PLCsFilling control: Electronically controlled with flow switches (volumetric)Key models and modules:Krones Contiform S20 blow molder (2006)Krones Volumetic filler (2006)Krones capper (2006)Krones Checkmat bottle inspector (2006)Krones SynCo bottle conveyor system (2006)Krones Etima labeling machine (2006)Markem Smart Lase C350 laser coder (2015)Ocme Vega N70/2 shrink wrapperComag/Decimo HM 100/2 handle applicator (2006)Ocme Pegasus M400 palletizer (2006)Bema Silkworn Turbo pallet stretch wrapper (2006)Eidos 7P6ERLP pallet labeler (2020)M. Tanner AG/Prologic preform hopper (2018)M. Tanner AG preform unscrambler (2006)Gassner cap hopper (2006)Cryotech International nitrogen doserEuropool pack conveyorAdvanced Automation & Control SystemsThe line is equipped with Siemens PLC-based automation for coordinated control across blow molding, filling, labeling, and end-of-line operations. The filler uses electronically controlled flow switches to ensure accurate volumetric dosing and consistent fill levels at high speeds. Centralized controls, synchronized conveyors, and integrated inspection enhance efficiency while minimizing downtime and changeover complexity.Siemens PLC architecture across the production lineVolumetric filling with electronic flow controlIntegrated inspection via Krones CheckmatCoordinated conveyor logic with Krones SynCoLaser coding by Markem Smart Lase C350Production Line Integration CapabilitiesThis production line integrates seamlessly from preform handling through pallet labeling. The Krones SynCo and Europool conveyor systems ensure smooth transfers between modules, while the shrink wrapper, handle applicator, palletizer, stretch wrapper, and pallet labeler complete a fully automated packaging and logistics flow.Inline operation from blow molder to pallet labelerFormat compatibility: 0.5L and 1.5L PET... Kjdpoy Icpqefx Ai Rjdr

Condition: good (used), Description: The HELIOMAT 6K is a batch dryer specifically designed for the efficient drying of small quantities of plastic material directly before processing. It is particularly used in laboratories or when frequent material changes are required (e.g., small series production). Batch dryer/pre-drying station with an integrated absorption dryer, type TLZ 12.1. Six 15-liter V2A modules can be dried simultaneously on the Heliomat, each with different temperatures, featuring a sliding guide and an outlet slide (80x15mm) for ARBURG machines. Four additional 15-liter modules are included, so you will receive a total of ten small-batch dryers. 3 air filters Cooler for recirculated air at high temperatures above 120°C. Drying can be performed up to 170°C! Weekly timer 6 red/green traffic lights to indicate the end of the drying cycle or a fault at the docking station Automatic 6-stage air flow control via frequency inverter on the dryer fan The unit is mobile Includes interface for a dew point sensor for the absorption dryer. Kedozpydxopfx Ai Rsdr The Heliomat is 140 cm high, 54 cm deep, and 2.95 m wide.

Year of construction: 2025, condition: used, functionality: fully functional, This is a glasswashing machine from the manufacturer Hobart, model GXCROI-10C, manufactured in 2025. This compact professional dishwasher is equipped with an integrated osmosis system and a base unit for empty racks or detergent, as well as suction lances for monitoring the fill level. The glasswashing machine has been inspected in our in-house workshop and is fully functional and in near-new condition. The list price of the machine in this configuration is €13,285.16 (gross). You will receive an invoice with VAT shown. Our used equipment service for you: 6 months warranty on all electrical parts, limited to the replacement of defective parts, without installation and removal costs. High-quality brand-name equipment at fair prices. Professional refurbishment/inspection & expert cleaning. Checked & fully functional – or your money back. Flexible shipping or self-collection options. Competent advice – before and after the purchase. Provision of operating instructions, connection diagrams & spare parts. Testing according to DGUV V3 Technical data: External dimensions WxDxH: 600 x 600 x 1260 mm Electrical connection: 400V / 50 Hz, 6.8 kW Year of manufacture: 2025 60/90/120 sec. and special programs Water consumption: 2L/rack Tank capacity: 60 liters Rack size: 500 x 500 mm Loading height: 305 mm Condition: Used, inspected and fully functional Kdjdpfx Aey Uvuaei Rjr Base model: Front-loading machine Theoretical capacity up to 60 racks/h, 2,160 glasses/h 7 automatic programs: short, standard, cold rinse, hygiene, basic cleaning, intensive program, E-Save Automatic self-cleaning program Wash pump with soft start Integrated WLAN module Completely ready for connection: inlet and outlet hoses, connection cable (400 V connection), liquid detergent dosing pump, rinse aid dosing pump, rinse pump, drain pump, backflow preventer Multi-phasing: Machine can be switched from 400 V to 230 V on-site Shock-absorbing door with self-closing mechanism Tank, sump, cladding made of CrNi steel 1.4301 Universal glass rack 00-378814-000: 500 x 530 mm With base unit: 435 mm high, with removable door, CrNi steel 18/9, space for 2 empty racks or detergent Customer benefits: Compact design, installation height of only 705 mm / with integrated osmosis only 820 mm Self-cleaning washing system VISOTRONIC-TOUCH control SmartConnect app SENSO-ACTIVE resource management CLIP-IN washing and rinsing system Intelligent data storage USB interface GENIUS-X2 fine filter system Cold rinse Intensive program Screen insert control Optional fill level indicator Hygiene program in combination with the Hygiene Tab INTENSIVE Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors. Do you have any questions, would you like to request advice or would you like to see something on-site? You can reach us by telephone during our opening hours: Monday to Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is exclusively subject to our general terms and conditions (GTC).

Condition: used, Year of construction: 1996, operating hours: 26,000 h, machine/vehicle number: R94, Used Tetra Pak TBA 19 200ML Slim Filling machineTechnical Specifications & Performance DataThis aseptic carton filling machine is a second hand Tetra Pak TBA 19 V10 configured for the 200 ml Slim format. It has been workshop checked, fully tested, and received a total refurbishment in 2026 to ensure reliable performance for industrial packaging and beverage production environments. Ideal for a used bottling line upgrade or as a standalone aseptic packaging cell, it integrates smoothly with downstream equipment for complete end-of-line solutions.Manufacturer: Tetra PakModel: TBA 19 V10Machine type: Aseptic carton filling machineYear of manufacture: Approx. 1996Running hours: Approx. 26,000Format/volume: 200 ml SlimRefurbishment: Total refurbishment completed in 2026General condition: Workshop checked, fully tested, good working orderAdvanced Automation & Control SystemsEngineered for consistent aseptic performance, this filling machine features an integrated control philosophy typical of Tetra Pak systems, supporting efficient start-up, stable throughput, and simplified format handling for the 200 ml Slim line. Centralized operator control via HMI streamlines operations and facilitates guided changeovers and diagnostics. The machine has been fully tested under workshop conditions, with live online test runs available to verify automation responses and process stability using water-filled packages. Safety interlocks and guarding are present across the production cell to protect operators during operation and maintenance.Production Line Integration CapabilitiesThe TBA 19 V10 can operate as a standalone aseptic filler or as part of a complete used bottling line for beverage production. The included conveyor set—approximately 30 meters with four 90° curves and two chain tensioners—ensures smooth transfers to downstream packaging modules. The TCBP 70 Multiinfeed tray packer is compatible/optional for wrap-around applications, while the TTS 51 tray shrink wrapper provides flexible secondary packaging options.Machine type/categoryManufacturer / ModelYearFilling MachineTetra Pak TBA 19 V101996 (approx.)Straw ApplicatorTetra Pak TSA 21ConveyorsApprox. 30 m with 4 x 90° curves, 2 x chain tensionersShrink WrapperTetra Pak TTS 51Case/Tray PackerTetra Pak TCBP 70 Mul... Kodpjzrgqwsfx Ai Rodr

Condition: like new (used), Year of construction: 2013, functionality: fully functional, input voltage: 400 V, compressed air connection: 6 bar, year of last overhaul: 2026, warranty duration: 12 months, input frequency: 50 Hz, Usable printing format: 100x140. Maximum frame format: 160x120. Vacuum platen adjustment, horizontal/vertical, with millimeter precision. Adjustment of the rear gap (known as Sincoprint) with a knob located on the front of the machine, within easy reach of the operator. Kdsdpfx Aiszqyqhe Rjr 3-position selector: manual, single, and automatic, with a timer to regulate the time at the end of the printing cycle before the printing head rises. Timer for adjusting automatic operation. Two-function foot pedal: left pedal to start the machine, right pedal to activate the sheet vacuum during registration. Adjustment of the squeegee and counter-squeegee speed with a potentiometer.

Condition: new, power: 84 kW (114.21 HP), fuel type: diesel, color: white, number of seats: 9, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), Stock vehicle available for immediate delivery Sprinter 311 New Vehicle Gross List Price: €63,267.00. Factory Original Mercedes-Benz Conversion Seating Configuration: 2+2+3 Total of 9 seats Optional on request: Airline floor system and 7 sleeping seats with left and right armrests, also available in extra wide version upon request. Special equipment includes: - 3-button remote control for central locking - Interior: air vents on instrument panel - Fuel tank: Main tank 71 litres - Spare wheel with matching tires - Spare wheel holder under frame end including jack - Electrically operated right-hand sliding door - Rear mud flaps, front mud flaps - Seats in cargo/passenger compartment: 1st row 2-seat bench, 2nd row 2-seat bench, 3rd row 3-seat bench - Rear windows tinted / privacy glass - Jack - Rear additional indicator lights (roof mounted) Kedpfjzuvc Uex Ai Redr Additional features: - 3rd brake light - Overhead storage above windshield - Storage compartment below passenger side dashboard - Storage: luggage net on rear doors; storage nets on the backrest of left and right front seats - Rear tow hook - Adaptive brake light - Passenger airbag, driver airbag - Hill start assist - Trailer coupling: wiring for trailer socket - Straight rear exhaust - Electrically folding exterior mirrors - Electrically adjustable and heated exterior mirrors (both sides) - Blind spot assist in outside mirrors - Outside temperature display - 1-pole battery isolator switch - Floor assembly in combi version - DAB digital radio tuner - Roof lining - Automatic activation for driving lights - Grab handle on rear right C-pillar - Driver assistance systems: active brake assist, active lane keeping assist, Attention Assist (drowsiness detection sensor), intelligent speed assistant, breakdown management, crosswind assist - Windows for rear doors, fixed windows in cargo/passenger compartment at rear left, rear right, front left, front right - Alternator 250 A - Grab handle on B-pillar - Heated rear window - Body/Conversion: Standard combi - Flip cover for storage compartment - Instrument cluster with color display - Comfort suspension - Communication module (LTE) for digital services - Head airbag system (window bag) - Plastic floor in cargo/passenger area - Steering wheel (mech. adjustable steering column) - Multifunction steering wheel - Side marker lights - Mercedes-Benz emergency call system - Engine: 2.0 L - 84 kW CDI CAT - MBUX multimedia system (10.25'' touchscreen) - Passenger car registration - Pro - Wheelbase: 3665 mm - Tire pressure monitoring system - Reversing camera - Interior rear-view mirror - Low-emission (Euro VI standard) - Windscreen wipers with rain sensor - Sliding door right (cargo/passenger area) - Thorax-pelvis sidebag for driver and passenger - Seatbelt warning system for both driver and passenger - Seat/upholstery: fabric - Adjustable passenger and driver seats - 7x17 steel wheels - Start/Stop engine system - 12V socket in cargo/passenger area - USB port below central dashboard (charging only) - All-round glazing - Wheel arch and half-height standard side trims (plastic) in cargo/passenger area - 92 Ah AGM battery - Pre...

Condition: like new (used), functionality: fully functional, machine/vehicle number: SBO 6/10, Sidel Stretch Blow Moulding Machine Max. output: 6.000 bottles/hour. Max. bottle size: 3.000 cc. Blow stations: 6. Machine is in very good conditioning and well maintained. GENERAL INFORMATION The SBO 6/10 has 6 molds and 10 heating modules. Will work with a wide range of bottle sizes and styles from 0.25 to 3 liters. Sidel 2-step ^PET stretch-blow molders require previously manufactured preforms be supplied to the machine. Separating the bottle manufacturing and preform manufacturing processes allow production to be optimized, provide greater flexibility of operation and use, and provide higher production output rates and yield. MAXIMUM PREFORM DIMENSIONS Neck height 9 – 41 mm (measured from bottom of support ring) Minimum inside diameter of neck 19 mm Maximum outside diameter of neck 34 mm Preform support ring diameter 29 – 51 mm Maximum preform length 210 mm MAXIMUM BOTTLE DIMENSIONS Maximum bottle diameter 130 mm Maximum bottle height 380 mm Bottle capacity 0.25 – 3 liters AVERAGE PREFORM WEIGHTS (non carbonated and carbonated liquids) 0.25 liter bottle 14-20 grams 0.50 liter bottle 20-33 grams 1.00 liter bottle 26-40 grams 1.50 liter bottle 35-51 grams 2.00 liter bottle 44-58 grams 3.00 liter bottle 68-84 grams BLOW WHEEL Height 3.5 meters Number of molds 6 Closing force 10 tons Item height (under neck) at outfeed 1.4 meters approximately Machine DC drive motor power 4 KW HEAT CONDITIONING Height 2 meters Number of oven heating units 10 Number of heating zones per unit 8 Maximum power 170 KW ELECTRICAL USAGE Maximum supplied power 200 KW Average consumption 100-150 KW/hr (varies per bottle being produced) COMPRESSED AIR Supplied power from 7-35 bar Pressure 7 bar Flow rate 50-100 Nm3/hr (varies per bottle being produced) Blow pressure – champagne base up to 25 bar Blow flow rate – champagne base 110-550 Nm3/hr Blow pressure – petaloid base up to 35 bar Blow flow rate – petaloid base 155-770 Nm3/hr CHILLED WATER Temperature 10-12 degrees Centigrade Pressure 5-6 bar Flow rate up to 6 cubic meters/hour Kcal to be removed up to 16,000 Kcal/hour WEIGHT Blow wheel with molds 8 tons Heat conditioning unit 2.2 tons Preform feeder 0.65 tons Electrical cabinet 0.85 tons Kodpfsg Ailcsx Ai Rsdr PREFORM HEAT CONDITONING The preforms are transferred neck up to the heat conditioning device. This unit continuously insures the preforms are inverted before passing, neck down, in front of the heating units and then inverts them again. During the heating phase, the preforms are rotated and their necks protected from the heat in order to optimize the distribution of heat without deforming the neck. Heating is insured by 10 heat modules. Each unit can accommodate up to 8 infrared lamps stacked horizontally whose ends are air cooled. The heating power of 8 zones, corresponding to the 8 rows of lamps, can be controlled in order to optimize the heat profile. These zones are regulated on all SBO Models. After heating, a control by infra-red camera of preform temperature enables regulation of the zones under control, thus insuring maintenance of the required temperature.

Condition: used, Year of construction: 2003, functionality: fully functional, total width: 360 mm, total length: 820 mm, total height: 500 mm, type of input current: AC, workpiece diameter (max.): 25 mm, overall weight: 92 kg, input voltage: 400 V, Clamp, cut off and surface grinding in one operation The machine has two grinding spindles working in parallel, one for cutting off and one for finishing the end face to the finished size The desired workpiece length is set to an accuracy of 1/100mm on the scale. To open the jig: Lever in the middle to the right: insert workpiece To close the jig: Lever to the left To cut: Lever up to the left To grind the surface: Lever down to the left To open the jig: Lever in the middle and to the right: remove the finished workpiece The grinding wheel can be adjusted and dressed at any time without losing the proper position. Version with motor protection, cover switch and restart protection. Without Fixing Holder: The machine is delivered with two rulers (300mm & 600mm). max. Length of workpiece, finished: 300mm or 600mm min. Length of workpiece, finished: 54mm Diameter of Workpiece: Ø1-25mm With Fixing Holder: max. Length of workpiece, finished: 60mm min. Length of workpiece, finished: 12,5mm Diameter of Workpiece: Ø1-10mm Ejector Pins with a Cylindrical Head: max. Size 6 max. Oversize of the Workpiece before processing: 195mm Length Tolerance: +/-0,01mm Angularity: +/-0,01mm Kodpfoxwp A Hox Ai Rsdr Weight: 92kg Dimensions without Scale Rod (LxWxH): 430x360x500mm Dimensions with Scale Rod (LxWxH): 1020x360x500mm Total Height (open Cover): 950mm Cutting Wheel, tissueless: SGA60P6BR1, Ø180x1xØ31,75mm Grinding Wheel: PA46, Ø100x50x10xØ20mm Location: Austria / Vienna Condition: New, Machine in Stock, 6 Month Warranty Delivery Time: 3 Weeks Including the following accessories: • 1 piece Cutting Wheel SGA60P6BR1 with Flange, mounted • 1 piece Grinding Wheel PA46 with Flange, mounted • 1 piece Diamond Dresser, mounted • 1 piece Belt, mounted • 2 piece Y-Spanner-Wrench • 1 piece each Allen Key 3mm, 5mm, 3/16“ • 1 piece Hex Wrench 6mm • 1 piece Scale Rod 300mm • 1 piece Scale Rod 600mm • 1 piece Caliper with Quill for Scale Rod • 1 piece Cleaning Brush • 1 piece Rod • 1 piece Manual, German • 1 piece Wooden Box

Condition: excellent (used), Year of construction: 2017, Batch mixer, type WBX 1100 1 control unit for the mixer with frequency converter Kjdpfx Aeza Ap Tsi Rsdr 1 cutter head, 5.5 kW 1 manual shut-off valve 1 separate control panel ("remote control")  maximum useful volume: 770 liters  mixing product: plastic granules  bulk density: ~0.7 - 0.8 kg/liter  product properties: free-flowing  mixing time: < 3 min. MACHINE DESCRIPTION Mixing drum  horizontal cylindrical mixing drum  end walls screwed to the drum Mixing system  mixing tools, such as ploughshares or inclined blades, screwed to blade arms in pockets Bearing  bearing of the shaft in flange bearing housings located outside the mixer, with roller bearings Sealing  shaft sealing by easily replaceable packing glands, packing glands cleaned by air Feeding  2 nozzles with flange, according to dimension sheet Ventilation  through 1 nozzle with flange, according to dimension sheet with filter bag incl. bracket and welded-in protective grid Discharge  via a dead-space-free closing flap, pneumatically operated  1 outlet nozzle with flange, according to dimension sheet Liquid feed option  none Inspection and cleaning  through 1 flap at the front of the drum, (1700 x 550) Flap closed by quick-release fastener  occupational safety and accident prevention by locking magnet and limit switch (not wired) Materials  mixing drum made of: stainless steel 1.4306  mixer shaft made of: stainless steel 1.4306  mixing tool made of: stainless steel 1.4306 Subject to prior sale Please send inquiries only by email Note: The machine is in storage and can be inspected on site. The buyer must arrange for shipping. This is not included in the quoted price.

Condition: used, This listing is for the Agilent 34970a Data Loger Switch Unit The unit is in full working condition and is ready for immediate use Key Features: 3-slot mainframe: Supports up to 60 2-wire channels using plug-in modules. Built-in 6½-digit DMM (Digital Multimeter): Measures voltage, current, resistance, frequency, and temperature. Plug-in Modules Available: e.g. 34901A (20-channel multiplexer), 34902A (16-channel actuator), 34908A (40-channel single-ended multiplexer), etc. Interfaces: GPIB and RS-232 standard (USB via adapter). Logging Capabilities: Can log data over time for test/monitoring applications. Scan Rates: Up to 250 channels/sec depending on configuration. User Interface: Front-panel controls with LCD display. Remote control via SCPI commands. Kdedpfexhfcdox Ai Rjr Typical Applications: Environmental monitoring (temperature, humidity) Functional test systems Data logging in labs Automotive and aerospace test setups Industrial process monitoring

Condition: used, mileage: 325,000 km, power: 105 kW (142.76 HP), first registration: 07/2020, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 11/2026, color: beige, gearing type: automatic, emission class: euro6, number of seats: 2, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), had accident, navigation system, parking heater, soot filter, MB Sprinter 314 CDI - Automatic - Ambulance Kdodpfjzvk Hqjx Ai Rjr Engine damage Special equipment: 1 DIN slot in the front below the headliner, 2nd battery (auxiliary battery) inside, storage compartment above the windshield, storage compartment below the dashboard on the passenger side, towing eye at the rear, airbag on the passenger side, exterior mirrors electrically adjustable and heated, both sides, DAB tuner (digital radio reception), chassis: stabilization level I, windows for rear doors, window in the loading/cargo area: - fixed, front left, window in the loading/cargo area: - fixed, front right, parking brake electric, cup holders in the front, grab handles on the A-pillars, heated rear window, rear door (opening angle 270 degrees), terminal block for electrical connections (driver's seat box), steering wheel (steering column mechanically adjustable), multimedia system MBUX (7" touchscreen), navigation system for multimedia system MBUX, programmable special module, spare wheel in driving condition, spare wheel holder under the end of the frame including jack, interior rearview mirror, mud flaps in the front, seat belt system with warning system (passenger side), seats in the cab: passenger seat comfort, seats in the cab: driver's seat comfort, additional battery relay, non-woven battery 92 Ah, jack, heat protection glazing (windshield with band filter at the top), auxiliary heater (air) electric, auxiliary heater (hot water) Additional equipment: 3rd brake light, adaptive brake light, airbag driver side, traction control system (ASR), display for windshield washer fluid level, outside temperature display, brake assist, headliner in the cab, automatic activation of headlights, entry handle for sliding door on the partition to the loading area, electronic brake force distribution (EBV), driver assistance system: crosswind assist, body/superstructure: standard van, child safety lock, communication module (LTE) for digital services, fuel tank: main tank 65 liters, continuous partition to the loading area, headlight range adjustment, truck registration, Mercedes-Benz emergency call system, engine 2.1 liters - 105 kW CDI catalytic converter, wheelbase 3259 mm, low emission according to exhaust standard Euro 6, sliding door loading/passenger compartment right, seat belt system with warning system (driver side), seat cover / upholstery: fabric, start/stop system engine, service interval display Assyst, permissible total weight 3.50 t

Condition: excellent (used), functionality: fully functional, 1 x Blendtherm sauce cooker. All s/s. With full process control. Steam jacketed, front end discharge, with side wall scrape mixing action. Internal dimensions approx: 1.5 m x 750 mm x 600 mm. Overall dimensions: 2.5 m x 1.1 m x 1.8 m high Ksdevxgy Aepfx Ai Rjdr

Condition: excellent (used), Year of construction: 2023, BINDER VD 56 Vacuum Drying Oven with VD-M 53 Pump Module Manufacturer: BINDER GmbH Type: VD 56 Year of Manufacture: 2023 Machine Type: Vacuum Drying Oven Internal Volume: 55 liters Maximum Temperature: 220 °C Offered is a BINDER VD 56 vacuum drying oven from 2023, including a matching BINDER VD-M 53 pump module and a BINDER VAP 1 vacuum pump. The system is designed for gentle drying of materials under vacuum conditions and is particularly suitable for laboratory, research, development, quality control, and industrial process applications. Technical Data: Manufacturer: BINDER GmbH Model: VD 56 Article Number: 9630-0002 Version: VD056-230V Year of Manufacture: 2023 Internal Volume: 55 l Temperature Range: +9 °C above ambient temperature to +220 °C Heating Time to 100 °C: approx. 80 min Spatial Temperature Deviation at 100 °C: ± 1.2 K Temporal Temperature Deviation at 100 °C: ± 0.1 K Leak Rate: 0.01 bar/h Vacuum Connection: DN 16 Measurement Port: DN 16 Rated Voltage: 200–230 V Mains Frequency: 50/60 Hz Rated Power: 1.4 kW Protection Class: IP20 Made in Germany Pump Module: Manufacturer: BINDER GmbH Type: VD-M 53 Article Number: 8012-1943 Year of Manufacture: 2023 Voltage: 200–230 V / 50–60 Hz Power: 1.80 kW Current Consumption: 8.0 A Phase: 1N~ Protection Class: IP20 Vacuum Pump: Manufacturer: BINDER GmbH Type: VAP 1 Article Number: 5013-0217 Year of Manufacture: 05/2023 Pumping Capacity: 2.0 / 2.2 m³/h Ultimate Pressure: < 7 mbar Voltage: 230 V Frequency: 50/60 Hz Current Consumption: 1.6 / 1.5 A Protection Class: IP40 Dimensions: VD 56 without attachments and connections: Width: approx. 638 mm Depth: approx. 461 mm Height: approx. 815 mm Internal Dimensions: approx. 400 × 343 × 400 mm (W × D × H) Net Device Weight VD 56: approx. 96 kg Maximum Load per Shelf: 20 kg Maximum Total Load: 60 kg Equipment: Digital controller with pressure and temperature display Program-controlled drying monitoring Automatic ventilation at the end of the process Internal data logger Ethernet interface Universal ventilation for inert gas or ambient air Vacuum connection DN 16 Measurement port DN 16 Safety glass pane with splinter protection Large viewing window Insert shelf BINDER VD-M 53 pump module BINDER VAP 1 vacuum pump Vacuum and connection hoses Connecting and mounting parts Operating and assembly instructions Further accessories as shown in the pictures Shipping Data: Weight VD 56: approx. 96 kg Due to size and weight, shipping by freight forwarder is required. Condition: Used Year of Manufacture 2023 Optical condition as shown in the pictures Nameplates are present Scope of Delivery: 1 × BINDER VD 56 Vacuum Drying Oven 1 × BINDER VD-M 53 Pump Module / Pump Cabinet 1 × BINDER VAP 1 Vacuum Pump Vacuum and connection hoses Connecting and mounting parts Connection cables Kdjdpfx Aszt R D Rsi Rer Operating and assembly instructions Accessories as shown in the pictures The unit is available for short-term delivery. Scope of delivery as shown in the pictures. Subject to change, errors and prior sale.

Condition: used, Year of construction: 1997, Profiling line, consisting of DEP Gabbiani + Weinig planing machine DEP Manufacturer: Gabbiani Type: T-Module 80/1600 Year of manufacture: 1997 Planing machine Manufacturer: Weinig Type: 22 BL Year of manufacture: 1995 Technical data of the DEP - 6 machining motors per side - 2 fixed scoring units, 3.2 HP / 3000 + 4500 RPM - 2 chip-removing units: 12.5 HP / 3000 + 4500 RPM - 2 chip-removing units: 12.5 HP / 3000 + 4500 RPM - 2 slotting units: 12.5 HP / 3000 + 4500 RPM - 2 free spaces - 1 feed motor: 4 HP / 1400 RPM Angle transfer between DEP and planing machine - Length: 290 - 1600 mm (1800 mm) - Width: 18 - 150 mm - Thickness: 5.5 - 50 mm - Density: 600 kg/m³ - Output max.: 150 workpieces/min - Belt conveyor after the double-end profiler - Toothed belt conveyor with brush attachment as counter holder - Cam conveyor for singulation - Toothed belt conveyor as buffer section - Longitudinal discharge - Roller conveyor before the planing machine - Control: Vipa, compatible with Siemens S7 300 - Safety technology Protective door switches: 3 Safety light barriers: 1 Technical data of the planing machine Working width and working height - Working width: 20 - 230 mm (with tool diameter 125 mm) - Working height: 9 - 140 mm (with tool diameter 125 mm) Kjdpfx Aezuzfbsi Rjdr Infeed table - Length: 2000 mm - Adjustment range of the jointer table: 10 mm - Adjustment range of the fence: 10 mm Surfacing table - Length: 1200 mm - Adjustment range of the table: 10 mm - Adjustment range of the fence: 10 mm Jointer spindle - Motor power: 5.5 - 15 kW Thicknessing spindle - Motor power: 5.5 - 11 kW Left spindle - Motor power: 5.5 - 11 kW 2. Right spindle - Motor power: 5.5 - 11 kW Top spindle - Motor power: 5.5 - 22 kW Bottom spindle - Motor power: 5.5 - 22 kW Universal spindle - Motor power: 5.5 - 11 kW Feed - Cardan feed, continuously adjustable: approx. 6-36 m/min - Motor power: 4 - 8.6 kW Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: good (used), Year of construction: 2016, operating hours: 14,600 h, functionality: fully functional, machine/vehicle number: 1087-1210063, Printing solution: Xeikon QA-P toner Kdjdpfsx Ap Rhox Ai Rsr Working resolution: Digital frontend Xeikon X-800 with toner optimization module Finishing solution: Unwinder, WFM, high-capacity stacker, Kern end processing solution Year of manufacture: 2016 If interested, we are happy to provide further information or video material. Disassembly was carried out by the Xeikon representative.

Condition: used, mileage: 250,000 km, power: 105 kW (142.76 HP), first registration: 01/2020, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 08/2026, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, soot filter, Mercedes-Benz Sprinter 314 CDI panel van L2-H2, support vehicle German vehicle from Mercedes-Benz leasing. Kjdpfezuv Rljx Ai Redr 1 owner – in top condition. Tires are NEW. Conversion with bed and 220V power outlets. Long-distance vehicle. 8 tires. Special equipment: 2nd battery (auxiliary battery) in the interior, airbag on the passenger side, audio system: MB audio system radio with USB and Bluetooth hands-free system, grab handle on the rear pillar on the right side, chassis: stabilization level I, windows in the cargo/passenger compartment: sliding, front right, wooden floor in the cargo area, folding cover for storage compartment, folding cover for storage compartments left/right, comfort chassis, fuel tank: main tank 93 liters, charging package dashboard (USB connections and 12V socket in addition), cable duct on the rear door, cable duct on the side wall, steering wheel with multifunction, marker lights on the side, fog lights with cornering light, spare wheel in driving condition, spare wheel holder under the end of the frame including jack, seat belt system with warning system (passenger side), seats in the cab: driver's seat heated, seats in the cab: driver's seat comfort, seats in the cab: driver's seat with lumbar support, 230V socket in the cab, battery separator relay in addition, step on the rear door, jack, auxiliary heater (air) with timer. Additional equipment: 3rd brake light, storage compartment above the windshield, storage compartment below the dashboard on the passenger side, adaptive brake light, airbag driver side, traction control system (ASR), display for windshield washer fluid level, exterior mirrors electrically adjustable and heated, both, outside temperature display, brake assist, headliner in the cab, automatic activation for driving lights, grab handle for the sliding door on the cargo compartment partition, electronic brake force distribution (EBV), driver assistance system: crosswind assist, rear door (opening angle 180 degrees), body/structure: high-roof panel van standard, keyless start, child lock, communication module (LTE) for digital services, cargo compartment partition, steering wheel (steering column mechanically adjustable), headlight range adjustment, Mercedes-Benz emergency call system, engine 2.1 liters - 105 kW CDI CAT, wheelbase 3665 mm, low emission according to emission standard Euro 6, sliding door cargo/passenger compartment right, seat belt system with warning system (driver side), seat cover/upholstery: fabric, seats in the cab: passenger seat adjustable, start/stop system engine, preparation for DAB radio reception, service interval display Assyst, heat protection glazing, permissible total weight 3.50 t. * Sales consultant information * + * AN APPOINTMENT IS REQUIRED FOR A TEST DRIVE OR INSPECTION * + * Trade-in and financing are possible. * Errors are not excluded. * Please check the equipment on the vehicle. Errors and prior sale are subject to change.

Condition: used, mileage: 250,000 km, power: 105 kW (142.76 HP), first registration: 01/2020, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 08/2026, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, soot filter, Mercedes-Benz Sprinter 314 CDI panel van L2-H2, support vehicle German vehicle from Mercedes-Benz leasing. 1 owner – in top condition. Tires are NEW. Conversion with bed and 220V power outlets. Long-distance vehicle. 8 tires. Special equipment: 2nd battery (auxiliary battery) in the interior, airbag on the passenger side, audio system: MB audio system radio with USB and Bluetooth hands-free system, grab handle on the rear pillar on the right side, chassis: stabilization level I, windows in the cargo/passenger compartment: sliding, front right, wooden floor in the cargo area, folding cover for storage compartment, folding cover for storage compartments left/right, comfort chassis, fuel tank: main tank 93 liters, charging package dashboard (USB connections and 12V socket in addition), cable duct on the rear door, cable duct on the side wall, steering wheel with multifunction, marker lights on the side, fog lights with cornering light, spare wheel in driving condition, spare wheel holder under the end of the frame including jack, seat belt system with warning system (passenger side), seats in the cab: driver's seat heated, seats in the cab: driver's seat comfort, seats in the cab: driver's seat with lumbar support, 230V socket in the cab, battery separator relay in addition, step on the rear door, jack, auxiliary heater (air) with timer. Additional equipment: 3rd brake light, storage compartment above the windshield, storage compartment below the dashboard on the passenger side, adaptive brake light, airbag driver side, traction control system (ASR), display for windshield washer fluid level, exterior mirrors electrically adjustable and heated, both, outside temperature display, brake assist, headliner in the cab, automatic activation for driving lights, grab handle for the sliding door on the cargo compartment partition, electronic brake force distribution (EBV), driver assistance system: crosswind assist, rear door (opening angle 180 degrees), body/structure: high-roof panel van standard, keyless start, child lock, communication module (LTE) for digital services, cargo compartment partition, steering wheel (steering column mechanically adjustable), headlight range adjustment, Mercedes-Benz emergency call system, engine 2.1 liters - 105 kW CDI CAT, wheelbase 3665 mm, low emission according to emission standard Euro 6, sliding door cargo/passenger compartment right, seat belt system with warning system (driver side), seat cover/upholstery: fabric, seats in the cab: passenger seat adjustable, start/stop system engine, preparation for DAB radio reception, service interval display Assyst, heat protection glazing, permissible total weight 3.50 t. * Sales consultant information * + * AN APPOINTMENT IS REQUIRED FOR A TEST DRIVE OR INSPECTION Kdodpszuv Rrefx Ai Ror * + * Trade-in and financing are possible. * Errors are not excluded. * Please check the equipment on the vehicle. Errors and prior sale are subject to change.

Year of construction: 2013, condition: used, This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details. For inquiries: Zoltán Utasi Plus 36 30 205 7380 • Press table dimensions:ca. 3450 mm long × 1450 mm wide. • Bonding area (electrode area): 3000 mm long × 1300 mm wide. • Maximum workpiece thickness: 130 mm. • The top pressure is provided by 8 hydraulic cylinders with Ø50 mm bore, arranged in two rows. • Side pressure is provided by 24 hydraulic cylinders with Ø50 mm bore, arranged in one row at 144 mm centers. This cylinder arrangement is required to achieve maximum pressure over the entire 130 mm glue line thickness and 3450 mm length. • Side pressure is continuously adjustable. • Recommended side pressure: o Softwood: 18–20 kp/cm² o Hardwood: 20–23 kp/cm² • The hydraulic power unit is equipped with a variable-displacement axial piston pump. • Maximum hydraulic pressure: 200 bar. • The PP sheet covering the press table is replaceable. It protects the expensive aluminum electrode from wear and significantly reduces cleaning time. • The press is suitable for producing laminated timber panels up to 6000 mm long in two pressing cycles. • Motorized loading table with a usable length of 3000 mm, providing easy material handling. • The loading table is equipped with rollers spaced at 250 mm intervals. • The loading table incorporates 4 transverse chain conveyors. During transverse material transfer, their upper level is raised to the roller level by 6 pneumatic cylinders. • The guide rails and drive for the transfer carriage are located above the loading table. • The steel unloading table has a length of 3000 mm. • The unloading table is equipped with rollers spaced at 300 mm intervals. • Material flow is from left to right. The loading table is located on the left side of the press, while the unloading table is located on the right side. • The conveyor-type glue applicator is positioned before the loading table. Conveyor width: 250 mm. Infeed section: 1500 mm long. Outfeed section: 3500 mm long. The glue applicator includes a removable glue reservoir. • A limit switch is installed at the end of the conveyor to prevent workpieces from falling off. • A movable roller table is positioned before the conveyor for applying adhesive to long workpieces. • RF Generator and Electrical Specifications • The integrated 30 kW radio-frequency (RF) generator is capable of curing approximately 2 m² of glued surface per minute when using PVA adhesive and timber with a moisture content of 6–8%. • The RF generator is easily tuned using an adjustable vacuum capacitor. • Power supply: 3 × 400 V, approximately 45 A. • The anode main switch and the control system main switch are located at the front of the press for easy access. Press Control, Monitoring, Operating Cycles and Safety Features Kodpfx Aiszn N Ecj Rodr • The control panel includes an anode current meter, grid current meter, glue curing timer, cycle indicator lights, press control buttons, fault indicator lamps, and an audible alarm. • The press closes in manual mode using a two-hand safety control system. • Equipped with an emergency stop safety system. • The press door includes an alignment cycle to assist in positioning the timber before pressing. Specifications are provided for information only.

Condition: good (used), Year of construction: 2017, NUMERICALLY CONTROLLED EDGE BANDER WITH PRE-MILLING (SPINDLES) & CORNER ROUNDING UNIT Brand: SCM Model: K 360 HP-T-ER1 Serial No.: AH/120944 Ref: 123304 Year: 2017 WORKING CAPACITIES: - Panel height to be machined: 8 - 58 mm Thickness 10 to 45 mm when using rounding unit - Panel length for edgebanding: 210 to 2500 mm - Minimum panel width to be machined: 90 to 1100 mm - Edge thickness in coil: 0.4 to 3 mm without rounding max 3 mm with rounding unit - Edge thickness in strips: max 6 mm without rounding max 3 mm with rounding unit - Edge width: panel thickness + 2 mm each side - Feed rate: 11 m/min - Minimum gap between panels: 600 mm - Panel overhang beyond the transfer chain: 30 mm MACHINE CONFIGURATION: - StarTouch control - Prepared for barcode reader - Reel holder table Ø800 mm - Front extension table - Easy size: digital positioning of infeed fence and panel passage height - Anti-adhesive spray unit - Pre-milling unit (RT-V trimmer) 12,000 RPM - Infrared panel preheating at infeed - Glue application unit (VC-VM) with interchangeable glue pot for granules, capacity: 1 kg. Heating time: 12 minutes Pneumatic pre-cut guillotine Digitally positioned pressure station with 3 rollers (1 roller powered and with timer) - Trimming unit (end cutting) tiltable 0-20° 12,000 RPM - Top/bottom flush trimming unit with digital positioning and copying system. 2 mm radius (or chamfer) router 12,000 RPM - Corner rounding unit R2 mm, 12,000 RPM, digital positioning - Top/bottom R1 & R2 mm radius scrapers with digital positioning - Top/bottom straight scrapers - Edge finishing spray device (Nebulizer) OTHER FEATURES: - Pre-milling group motors: 2x2 kW - End trimming motors: 2x 0.19 kW - Lift/lower motor: 0.30 kW - Feed motor: 1.1 kW - Flush trimming group motors (milling): 2x 0.65 kW - CE Marked - Lockable isolator, emergency stop buttons Kdedpferx S Ipjx Ai Rer - Power supply: 380 V, three-phase, 50 Hz - Pneumatic supply: 8-10 bar max, dry air - Extraction: 1x Ø100 mm and 5x Ø80 mm Spindles: 780 m³/h Edge trimming: 360 m³/h Scrapers: 2x360 m³/h Max. footprint in working order: 10.80 x 2.40 m Dimensions for transport (LxWxH): 4.85 x 1.20 x 1.70 m Weight: 1568 kg Machine supplied with mounted tools, manual, spare parts list and diagrams.