Used Brush Sander 1500/3000 Rpm, for sale (21,714)

Condition: excellent (used), Year of construction: 2020, Gear motor, electric motor, electric gear motor, stainless steel motor, stainless steel gear motor, stainless steel bevel gear motor, permanent magnet synchronous motor -Manufacturer: Bauer, adjustable stainless steel gear motor -Note: Frequency converter required -Type. SNFA5E09XA4-TF/VA-TM -Engine: speed 150-1500 rpm -Power: 1.1 kW -Hollow shaft: Ø 38 x 1750 mm Laodpfxjrqinme Am Noa -Protection class: IP65 -Dimensions: 645/200/H220 mm -Weight: 53 kg

Condition: used, Shunt motor, three-phase motor, electric motor, motor for saddle stitcher, saddle stitcher, speed-controlled, speed-regulated -Power: 0.77 - 23 kW -Speed: 100 - 3000 rpm -Shaft: Ø 48 mm -Construction: B3 -Protection class: IP 21 -Dimensions: 810/600/H450 mm Laedpfxecucuus Am Noa -Weight: 304 kg

Condition: used, Three-phase motor, electric motor -Power: 11 kW -Speed: 3000 rpm -Shaft: Ø 42 mm -Construction: B3 -Protection class: IP 33 Lasdpscwn Eiofx Am Nsa -Dimensions: 590/380/H380 mm -Weight: 116 kg

Condition: used, Three-phase motor, electric motor Laedpfx Amsfxx N Se Nja -Handover: in the current state as viewed -Holding foot: damage see pictures -Power: 7.2/12 kW -Speed: 750/1500 rpm -Shaft: Ø 42 x 110 mm -Construction: B3 -Dimensions: 640/310/H370 mm -Weight: 115 kg

Condition: used, Servo motor, electric motor, DC motor -Servo motor: comes from a machining center BJM type KF-10 -Power motor: 1.45 kW/voltage: 560 V -Max. Speed: 3000 rpm -Torque: 6.3 Nm -Brake: 24 VDC -Gearbox: manufacturer Atlanta type 5883109 i = 9.25 Ledpfx Amjfnk I Is Nsaa -Hollow shaft: Ø 25 x 120 mm -Dimensions: 530/200/H175 mm -Weight: 20 kg

Condition: used, Servo motor, electric motor, DC motor -Geared motor comes: from a plasma cutting machine -Manufacturer: SATO -Type: SATRONIK -Max. Speed: 3000/96 rpm Laedpfsd Nz Dmjx Am Nsa -Power: 0.21 kW -Torque motor: Nm -Shaft: Ø mm -Construction: B5 -Gearbox manufacturer: alpha Getriebebau -Type: TP 010-MF2-31 -Translation: 1:31 -Dimensions: 380/118/H130 mm -Weight: 7.5 kg

Condition: used, Electric motor, three-phase motor -Power: 4 kW Lodecwqdpjpfx Am Neaa -Speed: 1500 rpm -Shaft: Ø 28 mm -Construction: B5 -Protection class: - -Dimensions: 380/300/H250 mm -Weight: 38 kg

Condition: used, Shunt motor, three-phase motor, electric motor, motor for saddle stitcher, saddle stitcher, speed-controlled, speed-regulated, slip-ring rotor, slip-ring rotor motor -Power: 0.7-5.5 kW -Speed: 190-1500 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: IP 22 -external fan -Dimensions: 1140/600/H520 mm -Weight: 346 kg Laedpsd Nfdtefx Am Nsa

Year of construction: 2010, condition: used, Servo motor, electric motor, DC motor -Max. Speed: 3000 rpm -Power: 3.42 kW -Torque motor: 14.9 Nm -Shaft: Ø 32 x 58 mm Laodofbyc Nepfx Am Nsa -Construction: B5 -Dimensions: 320/138/H165 mm -Weight: 15 kg

Condition: used, Electric motor, three-phase motor -Power: 0.18 kW Lodpfefh Iw Dox Am Njaa -Speed: 3000 rpm -Shaft: Ø 14 x 30 mm -Construction: B3 -Dimensions: 290/165/H220 mm -Weight: 16.7 kg

Condition: used, Electric motor, three-phase motor Laedpscfyf Hsfx Am Noa -Power: 0.55 kW -Speed: 1500 rpm -Wave SW: 17 mm -Construction: B3 -Protection class: IP 54 -Dimensions: 405/265/H250 mm -Weight: 17.7 kg

Condition: used, Electric motor, three-phase motor -Power: 0.12 kW -Speed: 1500 rpm -Shaft: Ø 14 x 30 mm -Construction: B14 -Flange: Ø 105 mm -Protection class: IP 54 -Price: per piece -Number: 3x available -Dimensions: 245/187/H140 mm -Weight: 6.5 kg Lodpsghickofx Am Neaa

Condition: used, Electric motor, three-phase motor, electric motor -Power. 18.5 kW Laodpjd Inw Sefx Am Nja -Speed: approx. 3000 rpm -Shaft: Ø 42 x 105 mm -Construction: B3 -Dimensions: 640/440/H325 mm -Weight: 144 kg

Condition: used, Gear motor, electric motor, electric gear motor -Power: 0.37 kW -Diameter hollow shaft: 24 mm -Speed hollow shaft: 100 rpm -Diameter shaft: 14 mm -Speed shaft: 1500 rpm -Construction: hollow shaft -Protection class: IP 44 Laedpfx Aoc I Rk Ssm Nea -Number: 1x engine available -Price: per piece -Dimensions: 370/210/H175 mm -Weight: 12 kg

Condition: used, Electric motor, three-phase motor -Power: 0.75 kW -Speed: 1440 rpm -Wave SW: 17 mm -Construction: B3 Laodpfx Aocf Dh Esm Nea -Protection class: EX -Dimensions: 423/290/H240 mm -Weight: 27 kg

Condition: good (used), Servo motor, electric motor, DC motor, stepper motor, stepper motor -Speed: 3000 rpm -Power: 2 kW -Design: B5 Ledpfx Aodqck Eem Neaa -Shaft diameter: Ø 19 mm -Number: 2 motors available -Price: per piece -Dimensions: 500/165/H210 mm -Weight: 9.2 kg

Condition: good (used), Permanent magnet motor, electric motor, servo motor, DC motor, stepper motor, spindle motor, AC servo motor -Manufacturer: Fanuc, AC servo motor with brake from CNC machining center Santenberg GTC S 2 -Type: A06B-0227-B000 -Shaft: Ø 18/13 x 30 mm -Technical data: see photo of the nameplate -Number: 2x servo motors available -Price: per piece -Dimensions: 280/130/H165 mm -Weight: 12.9 kg/pc. Lasdpfskm Rm Rex Am Nsa

Condition: good (used), Three-phase motor, electric motor -Power: 1.5 kW -Speed: 3000 rpm -Brake -Shaft: Ø 24 mm -Design: B5 -Protection class: IP 44 -Number: 3x motors available Price: per piece Laedpfxeb A Hkte Am Nea -Weight: 25 kg/piece

Condition: good (used), Three-phase motor, electric motor -Power: 0.1 kW -Speed: 3000 rpm -Shaft: Ø 8 mm -Design: B3 -Protection class: IP 44 -Dimensions: 230/160/H110 mm -Weight: 3.3 kg Laodpsb A R Efjfx Am Nja

Condition: good (used), Reluctance motor, electric motor, three-phase motor, electric gear motor, reluctance motor -Manufacturer: KSB, electric motor type 132S-BWA7F3NNWDWAZKS -Power: 7.5 kW -Speed 50 Hz: 1500 rpm -Speed 100 Hz: 3000 rpm -Design: B5 -Shaft: Ø 38 x 80 mm -Protection class: IP 55 -Number: 1x available -Price: per piece -Dimensions: 470/345/H300 mm -Weight: 56 kg Lajdewrru Depfx Am Nea

Year of construction: 2026, condition: new, MDK 3000 Brush Washing Machine with Pulp Remover The unwashed fruits are fed in at the intake. After pre-washing, they are cleaned again by an additional fresh water shower on the conveyor belt. The system is easy to clean and equipped with durable, food-grade polypropylene/acetal modular belts, featuring continuously adjustable belt speed in both directions. It comes with two swivel castors, two fixed castors, or alternatively anti-vibration feet. Minimal maintenance required. Technical specifications: - Rated capacity: 3,000 kg/h - Power requirement: 5 kW, 400 V, 16 A, three-phase - Material: Stainless steel Wnr. 1.4301, AISI 304 - Dimensions: 4300x1250x2222 mm - Discharge height: 1,370 mm - Weight: 420 kg - Washing tank water capacity: 800 L/shift - Water consumption: 100–200 L/h (depending on settings) - Water connection: ¾” quick connector - IP65 electronics - Pulp remover equipped with a robust hammer (also suitable for beetroot and quince) - Grating mill: may be electronically disengaged, enabling use of the washer for stone fruit - Fitted with 4 counter-rotating brushes for intensive washing - Rotating paddle pushes fruit towards the conveyor Options: Lasdpfx Aefd E R Uem Nea - Various sieve inserts for the grating mill for the desired fineness of fruit and vegetables - Stop ‘n’ Go system – sensitive sensor allowing the fruit washer and all types of belt presses to operate clog-free in sync - Adaptive electric valve – fresh water spray operates only when the conveyor is running - Air injection – with nozzles and a fan at the bottom of the tank for intensive washing - Air knife – removes water from fruit surface, so less water enters the final product - Recirculation pump with filter – ensures correct flow in the washing tank

Condition: good (used), machine/vehicle number: 14012, Offer 14012 Technical data: - Length approx. 3000 mm - Width approx. 1500 mm - Material thickness of the top plate approx. 55 mm - Total height of the ribbed plate approx. 185 mm - Subframe Laodpfsw Rnf Iox Am Nja - Total height with subframe 730 mm - Weight approx. 3500 kg

Condition: good (used), Marble plate STIEFELMAYER Length: 3000 mm Width: 1500 mm Thickness: 350 mm Height on feet: 600 mm Number of feet: 6 feet Weight: approx 4 T It was used as a coordinate measuring marble. 2 same marble plates available. Ledpfx Aeig Hn Uem Noaa

Year of construction: 2023, condition: new, PLASMA CUTTING MACHINE MODEL MTX 1500/3000 Lsdpfjh Rabnjx Am Nsaa Construction: steel+aluminium Overall dimensions: 3350/2200/1300 Working area: 3100/1520/140 XY axis drive: 4Nm stepper motors with gears, precision grade 8 Z axis drive: stepper motor ball screw Travel speed: up to 25m/min Z axis control system: THC My plasma system Collision protection system to prevent burner damage Linear guide: TBI Automatic material detection system Power supply: 240V Maximum load: 1700kg Total weight: 1200kg net INCLUDED: - control panel -water table -exchangeable grate -control software in German, English, Polish -Certification of conformity CE - DTR - warranty The possibility of selecting the appropriate Hypertherm cutter to individual needs of the company.

Year of construction: 2025, condition: new, functionality: fully functional, Improve the quality of your finish with the DAS LDX 1000 – 6 brush sander The DAS LDX 1000 – 6 automatic machine is designed for precise sanding and finishing of profiled wood or MDF elements, offering excellent results even for the most demanding aesthetic requirements. It is ideal for smoothing, fine sanding and final preparation of surfaces, thanks to the versatile and robust configuration of the 6 working units. Standard features and technical characteristics: Multiple working units: oscillating longitudinal drums, oscillating pads, transverse drums with Ø 280 mm and width 1000 mm, equipped with 20 helically mounted brushes. Working capacity: max. width 1000 mm, workpiece thickness max. 100 mm. Efficient sanding: disc rotation speed between 50 – 300 RPM (adjustable via frequency inverter). Sanding brushes: adjustable length between 20 – 70 mm, allowing detailed work on profiles with a depth of up to 8 mm. Touchscreen control panel: Ergonomically positioned, it allows independent control of each unit. The interface is intuitive, developed by DANIBRUM engineers for fast and efficient operation. Adherent conveyor belt: Equipped with ribbed rubber for constant advance, driven by a 1.1 kW motor. Includes automatic centering roller, height adjustment sensor and brushes for dust removal at the entrance and exit. Professional sliding system: Based on recirculating ball bearings, it offers precise, reliable and low-maintenance movement. Lubrication is done manually. Oscillation for sanding units: Ensures uniform finishing and prolongs the life of abrasive belts and sisal brushes. Efficient exhaust system: Each group has dedicated exhaust ports, connected to 8 Ø 100 mm outlets, keeping the work area clean and efficient. Fast side access: Large side openings allow easy brush changes and quick access for maintenance. Toothed belt transmission: Ensures constant speeds, stable transmission and low noise level during operation. Ljdpfx Amowhbtzo Neaa Flexibility in finishing: The "fast release" system allows for quick changes of belts and brushes. The adaptable configuration is suitable for various styles and types of finishing. The DAS LDX 1000 – 6 machine is an efficient solution for manufacturers who want superior quality in the processing of profiled wood elements, with high productivity and impeccable finishing. Maximum working width 1000 mm Maximum working height 100 mm Longitudinal drum diameter (Ø) 220 mm Longitudinal drum drive motor power - oscillating 2 x 1.5 kW Longitudinal drum oscillation motor power 0.55 kW Oscillating pad diameter 200 mm Oscillating pad drive motor power 1.5 kW Pad oscillation motor power 0.18 kW Transverse drum diameter (Ø) 280 mm Transverse drum drive motor power 2 x 2.2 kW Advance motor power 1.1 kW Brush speed max. 1000 rpm Exhaust hood diameter (Ø) 4 x 100 mm Overall dimensions 3300 x 1600 mm Weight 1500 kg Technical support available in Romanian, English or German.