Used Carrying Mandrel for sale (4,049)

Condition: new, Year of construction: 2025, THE PRECISION 3-ROLL BENDING MACHINE When developing the compact and mobile horizontal bending machine, the focus was clearly set on the production of dimensionally accurate coils such as handrails for spiral staircases. This is the supreme discipline, since two mutually influencing variables (radius and pitch) must be combined in a bend to form a dimensionally accurate geometry. The interaction of tube calculation on the PC, implementation on the bending machine, and control via the measuring equipment with final correction of the bending values ensure accurate bending. By simple and few inputs into the PC tube calculation program, the local printer provides a printout and supports the calculation of all necessary bending and correction data to operate the machine. A new powerful drive concept allows infinitely variable adjustment of the bending speed, requiring only a 230 V (AC) connection. Hardened steel tools as well as hard plastic tools that are gentle on the surface are available for selection. To ensure optimum feed even with tight bending radii, all three bending shafts are driven. The drive concept also proves its worth in tough daily use on the flat, when bending tubes and profiles. Customers of the 4800, 5000 and 6000 bending system have the option of purchasing the roller bending unit without the drive. The roller bending unit with the designation RB43, can be adapted to the bending systems 4800, 5000 and 6000 via the bending shaft. In this case, the machines act as a drive unit. POSSIBLE APPLICATIONS: - Handrails/bottom rails for spiral staircases - Large tubular profile bends - General metal construction TECHNICAL DATA: - Bending capacity Ø 10 to 60 mm - bending radius min: 300 mm at Ø 42,4 mm - Bending direction right and left - Digital bending adjustment for radius and pitch - Safety foot switch with emergency stop function - Maintenance-free robust three-phase motor - Construction site suitable 230 V connection - Weight 280 kg OPTIONAL ACCESSORIES: - Support roller - for stabilization - Lifting roller - to produce controlled slope - MGR - measuring device to determine the correct radius - MGV - measuring device to determine the correct slope based on torsion - MPW - PC calculation program to determine the correct bending values - RB4303 - universal bending tool for profiles up to 60 mm height - Tools for special profiles Fedpfx Asng A R Ssd Nogb OUR SERVICE FOR YOU ON SITE: - Welcome to the test production in our house in the demo room - Consultation-information meeting at your site - Consultation and handling as leasing/financing purchase via - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, THE ECONOMICAL MANDREL BENDING MACHINE FOR TIGHT BENDING RADII. For tube dimensions from 20 - 90 mm, this bending system offers solutions for complex geometries with standard radii of 2xD. Depending on material quality and wall thickness ratio, radii of 1.5xD can also be realized suitable for series production. With a tool height of 120 mm, there are also sufficient options for special profiles. The extremely precise and powerful electric drive of the bending axis as well as the stable and rigid construction of the mandrel carrier and the bending arm also contribute to the desired bending result. The plug-in bending tools allow a quick changeover to other tube dimensions. The clamping pressure for the tube clamping can be optimally adjusted. The PLC control (can be expanded as required via USB stick) with data memory and the latest X2X interface can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for a maximum of 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The control system has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. Also available with pneumatic rotation stop or with gear-assisted length and twist positioning. POSSIBLE AREAS OF APPLICATION: - Plant engineering, e.g. chemistry - hydraulic piping - metal construction- prototype construction- pipeline construction TECHNICAL DATA: Bending capacity 7000: Ø 20 to 70 x 5 mmbending capacity 9000: Ø 20 to 90 x 5 mm depending on the material- bending radius min/max: 40 mm/250 mm- Bending radii min: 1.5 x Ø (standard 2 x Ø ) - Multifunction machine control Bending angle adjustment (0,1°) - Mandrel support lengths 3000/4500/6000 mm - Maximum 180º bending result - Weight 1600-3200 kg (depending on version) - Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: - Automatic mandrel lubrication (minimum quantity) - Pneumatic or hydraulic quick chuck - Larger bending radius up to 300 mm - Positioning of the length and twist via automatic brake function or via manual stops by foot switch - Semi-automatic positioning of the length and twist via servo motors - Automatic tool retraction - Pipe calculation software - 10 inch touch screen with integrated tube calculation - Data transfer via cable (LAN), via radio (WLAN) or USB OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via Fedpfonh R Suex Ad Nsgb - the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, machine/vehicle number: 1018, THE MANDREL BENDER WITH MANUEL CLAMPING: This mandrel bending machine with manual eccentric quick clamping for tube fixing enables rational bending. The compact drive unit with the detachable mandrel carrier offers advantages when used at the assembly site. Optimum bending accuracy is achieved by position detection directly on the bending axis. The bending angle is set easily and quickly via a convenient touchscreen control with menu-driven user interface. The comfort control allows two speeds as well as a parameterizable overbending function to compensate for material springback. The bending sequence is significantly shortened by automatic "free travel" at the end of the sheet. For more complex bending tasks, bending programs can be stored with a maximum angle sequence of 50 bends per geometry. An almost unlimited number of programs can be stored on the control or a USB stick, as well as 200 materials. The plug-in bending tools allow rapid conversion to other tube sizes. For difficult geometries, the bending direction of the machine can be changed to right or left bending as standard. The open bending unit allows, for example, the bending of railing frames with only one weld seam. The optional calculation software on the PC determines the cut length for the entire geometry as well as the travel distance, twisting angle and bending angle for each bend. The mandrel retraction is programmable and can be retracted automatically ahead of time when a bending angle is reached. POSSIBLE APPLICATIONS: - Plant engineering, e.g. chemical industry - hydraulic piping Fgjdpfx Aonfvy Usd Njb - prototyping - Pipeline construction TECHNICAL DATA: - Bending capacity Ø 6 to 50 mm - bending radius min/max: 10 mm/140 mm - Bending radii 2 x D - multifunction machine control bending angle adjustment (0,1°) - mandrel beam lengths 1500/3000/4500/ 6000 mm (special version also longer) - Maximum 180º bending result - Weight 300-500 kg (depending on version) Optional accessories: - Automatic mandrel lubrication (minimum quantity) - Digital displacement measurement for length and twist (resolution 0.1 OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, machine/vehicle number: 1018, THE POWERFUL BENDING MACHINE FOR WORKSHOP AND ASSEMBLY. The compact and mobile bending machine enables precise and repeatable bending up to an outer diameter of 60 mm stationary and directly at the assembly site. A powerful three-phase motor and a precision gearbox provide a powerful drive. Optimum bending accuracy is achieved by position detection directly on the bending axis. The bending angle is set quickly and easily via a convenient, menu-driven user interface with touchscreen control, which guarantees even more intuitive operation. For more complex bending tasks, 100 bending programs can be stored, with an angle sequence of max. 8 bends per geometry. The multifunction control allows variable adjustment of the bending speed for forward and backward travel, and a parameterizable overbending function is provided to compensate for material springback. With the aid of the four material characteristics, the material is automatically overbent to the required bending angle, thus realizing an exact bending result. The "stationary tube and rotating tool" principle ensures low space requirements during bending. Sliding shoes are used for thin-walled tubes to achieve a wrinkle-free bending result and to bend bends with minimal deformations from e.g. stainless steel and copper tubes. With the PB20 profile bending attachment, flat, square and round bars can be bent without any problems.Extremely small bending radii are made possible with the KBV small bending attachment. POSSIBLE AREAS OF APPLICATION: - Plant engineering- Hydraulic piping - Meander bending- prototyping- Sanitary and heating construction TECHNICAL DATA: Bending capacity 6000S: Ø 6 to 50 x 4 mm alternating current 230 V Bending capacity 6000D: Ø 6 to 60 x 4 mm Bending capacity 6000DS: Ø 6 to 60 x 5 mm three-phase current 400 V Bending capacity 6000D: Ø 6 to 60 x 4 mm three-phase 400 V - Bending radius min/max: 36 mm/280 mm - Optional large bending radii up to 500 mm - Multifunction machine control Bending angle adjustment (0.1°) - Maximum bending angle 240 - Hexagonal shaft 40 mm for quick tool change - Safety foot switch with emergency stop - Weight 110 kg OPTIONAL ACCESSORIES: - Profile bender PB20 - for bending flat and square iron up to max. 100 x 10 mm, round iron up to max. 20 mm Fgedjng Ax Sopfx Ad Njb - Roller bender RB43 - The RB43 is placed on the 6-edge shaft of the bending axis. By switching over to endless bending, the bending system acts as a drive unit. - Small bending device KBV - Special tool according to specification OUR SERVICE FOR YOU ON SITE: - Welcome to the test production in our house in the demo room - Consultation-information meeting at your site - Consultation and handling as leasing/financing purchase via - Service contracts, maintenance at your site

Condition: used, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 03/2018, loading space length: 13,800 mm, loading space width: 2,450 mm, loading space height: 3,000 mm, Equipment: ABS, Moetefindt Closed Car Transporter * Motorsport car transporter * Body: Moetefindt * First registration: 13.03.2018 * Unladen weight: 8,200 kg * Permissible total weight * ABS * EBS * BPW axles * Hydraulic tail lift * Lashing systems * 2x portal doors left * 2x portal doors right * Winch * Additional storage space for tools and spare parts * 2 axles, air suspension * Work lamps in loading area Fsdpfoy H Tm Rex Ad Njgb Dimensions (cargo area/loading platform) Cargo area length: 13,800 mm Cargo area width: 2,450 mm Cargo area height: 3,000 mm Tires: 1st axle: 205 / 65 R22.5 air suspension / 35% 2nd axle: 205 / 65 R22.5 air suspension / 35% ----Price: ,- Euro + 19% VAT. For further questions you can reach us at the following numbers: We speak: German, English, French, Polish, and ????? Subject to errors, omissions, and prior sale.

Condition: good (used), functionality: fully functional, machine/vehicle number: NR9VEGA26AR257231, empty load weight: 9,800 kg, maximum load weight: 28,200 kg, overall weight: 38,000 kg, axle configuration: 2 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, first registration: 01/2025, next inspection (TÜV): 02/2027, loading space length: 13,600 mm, loading space width: 2,550 mm, suspension: air, tire size: 245/70 R 17.5, tire condition: 70 %, maximum speed: 90 km/h, color: grey, trailer brake: trailer braked, Year of construction: 2024, Equipment: ABS, our vehicle number: #30806 VEGATRAILER 2D Jeep Carrier Car transporter for up to 6 vehicles A2 steering axle with friction joint Hammer Winch cable winch 2x drive-on ramps Air suspension ABS EBS BPW axles Drum brakes Twin tyres 245/70 R 17.5 3x storage/toolbox Fgodpeyw Ix Nefx Ad Nsb 2x central supports Water tank 2x LED reverse lights Leasing/financing available upon request!

Condition: good (used), Year of construction: 2002, received a new control unit in 2019 for €14,000 max. bending diameter: 63.5 mm Fgjdpfx Aoykl Rzjd Nob smallest bending radius: 32 mm motor: 30 kW

Condition: used, overall weight: 25,350 kg, axle configuration: 3 axles, first registration: 11/2016, loading space length: 15,500 mm, loading space width: 2,400 mm, loading space height: 3,000 mm, Equipment: ABS, Kässbohrer SP 9-16 Enclosed Car Transporter Internal Ref. No. for inquiries: 0326233 Ideal for sports cars, prototypes, and lowered vehicles * Overall condition: very good * Model: SP 9-16 * First registration: 11/16 * Unladen weight: 13,110 kg * ABS * EBS * Hydraulic tail lift * Additional storage space for tools and spare parts * 2 x double-wing doors on the left * 1 x single door on the left Fgedpfx Adjyulxgo Nsb * Manual controls inside on the left * Double-deck ramp length * 3 axles, air suspension * Work lights in cargo area Dimensions (cargo space/loading area) Cargo length: 13,400 to 15,500 mm Cargo width: 2,500 mm Cargo height: 3,000 mm Tyres: 1st axle: 245 / 70 R22.5 air suspension / 35% 2nd axle: 245 / 70 R22.5 air suspension / 35% 3rd axle: 245 / 70 R22.5 air suspension / 35% ----Price: ,- Euro + 19% VAT. For further questions, you can reach us under the following phone numbers: We speak: German, English, French, Polish, and ????? Subject to errors, omissions and prior sale.

Condition: good (used), functionality: fully functional, Year of construction: 1998, bending radius (max.): 600 mm, mandrel length: 1,200 mm, wall thickness: 8 mm, Transfluid DB 40100ST Mandrel bending machine Tube bending machine Fgsdpfx Aor H Havjd Nsb The above machine is a mandrel bending machine designed exclusively for the production of tubes and profiles with an outer diameter of 40-100 mm, max. 110x5 mm with a max. wall thickness of 8 mm or for the processing of solid materials with an outer diameter of up to 70 mm. Pipe push-on length/usable length: 1200 mm Radius range max:600 mm Bending height:1200 mm Machine data Length:4000 mm Width:2600 mm Height:1400 mm Weight:9000 kg

Condition: excellent (used), functionality: fully functional, mileage: 260,000 km, Year of construction: 2009, Log carrying truck in very good condition for sale Fgodpfxoyzmk Se Ad Nob

Year of construction: 1986, condition: good (used), strip width: max. 200 mm strip thickness: 0,1 - 1 mm coil weight: 0,5 t Fgjdpfebh Ucbox Ad Nsb mandrel Ø: 304 mm

Year of construction: 1994, condition: used, decoiler - expansion mandrel with coil lifter strip width: max. 650 mm strip thickness: max. 3 mm coil weight: 2 t Fedpfxsbh S Dpe Ad Nogb mandrel Ø: 406/508/610 mm

Year of construction: 1976, condition: good (used), strip width: 300 - 1.350 mm strip thickness: 0,35 - 3 mm coil weight: 12,5 t mandrel Ø: 508 mm Fgsdpfxjbh Ubwo Ad Nsb

Year of construction: 1980, condition: good (used), strip width: 1.650/1.750 mm strip thickness: 0,4 - 3 mm coil weight: 10 t interchangeable mandrels, Ø: 304/406/610 mm Fsdpfx Aodn I Hrsd Nsgb

Year of construction: 1975, condition: good (used), strip width: 200 - 1.650 mm strip thickness: 0,6 - 3 mm Fjdpfx Aed Ha E Asd Nsgb coil weight: 7,5 t mandrel Ø: 508/610 mm

Year of construction: 1988, condition: used, decoiler - expansion mandrel with coil lifter Bandbreite: max. 400 mm Banddicke: 0,3 - 4 mm Coilgewicht: 4 t Fodpfebh S Hkjx Ad Nogb Dorn-Ø: 508 mm

Year of construction: 1985, condition: good (used), strip width: 100 - 750 mm Fodpfx Adod Ha Hbs Nogb strip thickness: 0,5 - 4 mm coil weight: 10 t mandrel Ø: 406/508 mm

Year of construction: 2017, condition: excellent (used), strip width: 800 - 2.400 mm strip thickness: max. 3,5 mm coil weight: 20 t Fgedpfog Ewansx Ad Nsb mandrel Ø: 600 mm

Year of construction: 1977, condition: used, strip width: max. 800 mm coil weight: 12 t Fsdjbh Sz Sjpfx Ad Njgb mandrel Ø: 450 mm

Year of construction: 1968, condition: used, strip width: max. 500 (650) mm Fjdpfebh S Dyjx Ad Nogb strip thickness: 0,4 - 8 mm coil weight: 13 t mandrel Ø: 508 mm

Year of construction: 1975, condition: used, strip width: max. 450 mm strip thickness: 0,2 - 4 mm coil weight: 5 t mandrel Ø: 406/508 mm Fsdpfobh S E Eex Ad Nsgb

Year of construction: 1995, condition: good (used), strip width: max. 1.900 mm strip thickness: 0,3 - 3 mm coil weight: 25 t Fodpfx Adeg Iigvs Nogb mandrel Ø: 508 mm

Condition: used, Year of construction: 2006, RASI S80.6L - Mandrel Bending Machine - Mandrel and rotary draw bending of tubes and round profiles - Spiral bending of tubes - Includes tooling and documentation - Year of manufacture: 2006 Technical Data - Tube Ø x wall thickness: 82 x 2.6 mm - Max. section modulus: 12.7 cm³ - Min. tube Ø: 4 mm - Outer bending radius: 228 mm - Inner bending radius: 34 mm Fgjdpfx Asyvvk Ded Neb - Min. bending radius: 1.5 x D - Max. bending angle (accuracy ± 0.1°): 195° - Return bending speed (programmable): 0 – 9.3 rpm - Forward bending speed (programmable): 0 – 6.6 rpm - Pressure die: fixed / following - Tool configuration: single-, double- or triple-grooved - Bending direction: right - Feed speed (stepless): 0 – 60 m/min - Feed force adjustment during bending: stepless - Rotation speed (stepless): 0 – 60 rpm - Max. rotation angle (± 0.1°): unlimited - Max. tube clamping force: 8 t - Collet clamping range (diameter): 6.5 mm - Bending length: 3 – 6 m - Motor power: 11 kW - Operating voltage: 400 V / 50 Hz - Control voltage: 24 V DC - Machine length: < 7000 mm - Weight: approx. 2500 kg

Year of construction: 1971, condition: good (used), decoiler - expansion mandrel with coil lifting table strip width: 1.200 mm Fsdpfx Aed Ha E Ssd Njgb strip thickness: 0,3 - 5 mm coil weight: 10 t mandrel Ø: 508 mm

Year of construction: 1967, condition: good (used), strip width: 300 - 1.250 mm Fsdpfxjd Ha E Ij Ad Nsgb strip thickness: 0,5 - 3 mm coil weight: 6 t mandrel Ø: 508/610 mm