Used Carrying Mandrel for sale (4,027)

Condition: used, functionality: fully functional, Year of construction: 1991, load capacity: 10,000 kg, empty load weight: 1,015 kg, total length: 1,690 mm, Carrying mandrel Load center: 850 Cgsdpfxsu Dztfj Ad Njt Condition: Ready for use and fully functional Technical condition: good Description: Length: 1690 mm Diameter: 400 mm

Condition: used, functionality: fully functional, load capacity: 16,000 kg, total length: 1,500 mm, Carrying mandrel Condition: Ready for use and fully functional Technical condition: very good Description: Length: 1500 mm Diameter: 350 mm Cgsdpfsu Dzuvsx Ad Not

Condition: used, functionality: fully functional, load capacity: 6,000 kg, empty load weight: 1,250 kg, total length: 2,800 mm, Carrying mandrel Load center: 2000 Condition: Ready for use and fully functional Technical condition: very good Description: In addition to this DORN model, we have approx. 200 heavy-duty forklift trucks, compact forklift trucks, forklift trucks & sideloaders in our warehouse in Hamburg and Gdansk. Visit our homepage - sago-online Hire purchase & financing at favorable conditions are always feasible for us. We are also happy to buy your used truck free of charge, even without you purchasing a vehicle from us. Our owner Mr. Peter Sawitzki will be happy to advise you in detail about this TD-270 P.S.: Our forklift master workshop specializes in repair, maintenance, overhaul and special construction for forklifts from 8 tons. We are also happy to display your vehicle for sale on consignment. Cgsdpfx Adou Dzrbo Nst

Condition: used, functionality: fully functional, Year of construction: 2003, load capacity: 42,000 kg, empty load weight: 3,500 kg, total length: 1,600 mm, Carrying mandrel Load center: 1200 ISO class: Terminal West Condition: Ready for use and fully functional Technical condition: very good Description: Length: 1600 mm Diameter: 400 mm Cgodpfeu Dzwkjx Ad Nst

Year of construction: 2026, condition: used, functionality: fully functional, total length: 1,500 mm, load capacity: 18,000 kg, Tragedorn Load Center: 1200 ISO Class: Terminal West Codpfx Adoycm Hbj Negt Condition: As new Technical Condition: New Description: 254 mm diameter for steel coil handling

Year of construction: 2026, condition: used, functionality: fully functional, total length: 1,500 mm, load capacity: 18,000 kg, Tragedorn Load center: 1200 ISO Class: Terminal West Condition: As new Technical condition: New Description: 254 mm diameter for steel coil handling Codpeycm E Rsfx Ad Negt

Year of construction: 2019, condition: used, functionality: fully functional, empty load weight: 90 kg, total length: 2,000 mm, load capacity: 900 kg, Carrying mandrel Cjdsxnt Twspfx Ad Nogt Load center of gravity: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Condition: Ready for use and fully functional Technical condition: very good Description: Further data on request

Condition: used, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 02/2012, next inspection (TÜV): 02/2027, loading space length: 13,600 mm, loading space width: 2,480 mm, loading space height: 2,900 mm, loading space volume: 99 m³, Equipment: ABS, Kögel SN 24 Car Transporter Tail Lift Lifting Capacity 4000 kg Ref. No. for inquiries: 0426395 * Condition: very good * Perm. total weight: 35.00 t * First registration: 02/2012 * ABS * EBS Cgjdpsy I E Iiefx Ad Not * 3 axles, air suspension * Disc brakes * Edscha sliding roof * Tail lift: Dhollandia, lifting capacity up to max. 4,000 kg Loading compartment dimensions: Length: 13,600 mm * Width: 2,480 mm * Height: 2,900 mm Tyres: 1st axle: 445/45 R 19.5, 30% tread, air suspension 2nd axle: 445/45 R 19.5, 45% tread, air suspension 3rd axle: 445/45 R 19.5, 25% tread, air suspension ----Price: EUR 14,900 + 19% VAT For further questions, you can reach us at the following phone numbers: * We speak: German, English, French, Polish, and ????? Subject to errors, omissions and prior sale.

Condition: good (used), Year of construction: 2005, control type: CNC control, Tube diameter: 30 mm Wall thickness: 2 mm Max. bending angle: +/- 180 + 10 ° Tube insertion length: 4100 mm Cgodpfjy Ixnvjx Ad Nst - Round steel tube up to 30 x 2.2 mm² - Round stainless steel tube up to 30 x 1.5 mm - Square tubes 20 x 2.5 mm - Bending time for 90 degrees: 1.5 sec. (feed) - Longitudinal feed speed: 450 mm/sec. - Maximum bending radius: 125 mm - Freestanding bending head, 850 mm long - Bending axis drive: electrohydraulic

Condition: good (used), Year of construction: 1996, control type: CNC control, Tube diameter: 4-28 mm Wall thickness: / mm Minimum bending radius: 1.5 x D - 2.0 x D mm Control: Siemens LOGO Cgedpfxey Ixmxj Ad Nst Delivery rate: 4.5 l/min Max. bending angle +/-: 190° Nominal pressure: 250 bar Operating pressure: 3095 bar Delivery rate: 4.5 l/min Total power requirement: 1.5 kW Drive: Hydraulic cylinder and roller chain

Condition: used, maximum load weight: 12,350 kg, overall weight: 25,350 kg, axle configuration: 3 axles, first registration: 07/2014, next inspection (TÜV): 06/2026, loading space length: 13,820 mm, loading space width: 2,500 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Vehicle Data - Kässbohrer Vehicle Transporter - Semi-Trailer Ecotrans Type SP 9-16 CVtg - Year of manufacture: 08/2014 Dimensions and Weights - Length: 14,020 mm - Width: 2,550 mm - Bmin: 12,000 mm - Gross weight: 25,350 kg - Unladen weight: 13,000 kg - Payload: 12,350 kg - Kingpin / Support load: 9,000 kg Special Features - All hydraulic functions are remote controlled with HETRONIC - Ventilation louvres mounted on the wheel arch between the axles - Vehicle must be weighed in transport position after completion - Weighing certificates must be included with the construction description Body and Equipment - Hydraulic tank mounted on the semi-trailer - Front drive-over platform with 2 locking cylinders - Hydraulic stacking platform in the axle area - Lifting/lowering system operable from the cab - Splash protection mats installed - Access ramps for vehicles with low ground clearance - Winch installed - Ecotrans CVT anti-slip coating - Anti-slip coating on the loading flap Chassis and Axles - CVT galvanized chassis - Air suspension axle assembly SP 9-16 - Brake system with Wabco TEBS E - Electric lifting/lowering system - Kingpin installed - Support legs installed Hydraulics and Operation - Hydraulic system for winch - Hydraulic system for drive-over platform - Hydraulics for the cross-over platform in the axle area - Hydraulics for the loading flap - Hydraulics for spindle drives at front, center, and rear - Control blocks with 10 functions and remote control - Hydraulic oil: OMV hyd OHA 15 Electrics and Lighting - Electrics for Ecotrans CVT - Hetronic remote control - ISO parking socket - Lighting with lamp carrier - Cargo area lighting with work spotlights - Flasher unit and sockets installed - ELEX system installed Cgedpfxey Iikuo Ad Net Tyres - Tyre size: 245/70 R 17.5 XTA2 - Spare wheel included - Wheel / tyre for 6-ton version - Spare wheel cover fitted Box Body and Cladding - Box body for Ecotrans CVT - 6 door wings left and 6 door wings right - Rear portal fitted - Front wall installed - Insulation fitted - Cladding in the semi, neck, low-bed, and axle area - Loading ramps with hanger rail fitted - Access ladder included Paintwork - Body / box: Arctic White MB 9147 Signage and Documents - Signage in German specification - Accompanying documents in German - Reflective markings according to ECE-R48 - Nameplate set with holes - Trailer type plate included

Condition: new, maximum load weight: 13,600 kg, overall weight: 21,000 kg, axle configuration: 1 axle, total width: 2,550 mm, total height: 1,750 mm, Year of construction: 2026, Equipment: ABS, Brand new Eroglu truck/car transporter * Eroglu car transport semitrailer * Immediately available * Fully galvanized loading platform * Hydraulic cable winch at front Cgedpjy Iikbefx Ad Net * WABCO braking system * SAF axles * Air suspension * Lift axle * Tires 245/70 R17.5 * Aluminum rims * Continuous perforated metal loading platform * Wheel stoppers / lashing points * Very robust steel construction * Ideal for passenger car transport * Top condition – unused For further information, we are at your disposal.

Condition: used, maximum load weight: 24,855 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 10/2024, next inspection (TÜV): 10/2025, total width: 2,550 mm, total height: 1,260 mm, Equipment: ABS, Kässbohrer K.SOK Extendable Truck/Car Transporter TECHNICAL DATA: * Overall length: 13,200 mm * Wheelbase: 8,350 mm * Overall width: 2,550 mm * Fifth wheel height: 1,000 mm * Axle load: 24,000 kg * Kingpin capacity: 12,000 kg * Unladen weight ±3%: 11,145 kg * Gross vehicle weight: 36,000 kg * Vehicle extension: 1,800 mm * Bumper extension: 1,200 mm CHASSIS: * BPW branded axles, 9,000 kg technical capacity with air suspension and drum brakes * Last axle self-steering * First axle liftable * Wabco braking system * Tyres: 12 x 205/65 R17.5 FRAME: Cgjdsw Dw Adepfx Ad Net * Made of high-strength steel * Front ramps: 2 pieces, 3,800 mm long, hydraulically foldable and sliding, galvanized ramps (max. 1,000 mm extension, angle between 2° and 15°), load capacity 7 t * Center ramps: 2 pieces, 1,200 mm long, hydraulically foldable, galvanized ramps (angle between 0° and 44°), load capacity 7 t * Front axle ramp: 1 piece, 4,000 mm long, hydraulically foldable, galvanized ramp (angle between 0° and 29°), load capacity 7 t * Loading ramps: For loading vehicles onto the truck transporter, 2 aluminum loading ramps sized 2000 x 400 x 75 mm (L x W x H) with a capacity of 3.5 tonnes are provided. The ramp incline is 10° with the rear bumper closed and 8° when extended. * Wheel recess: 800 x 460 x 70 mm * Vehicle extension type: 1,800 mm, each 300 mm LOAD SECURING: * Lashing eyes: 1 x 2 pcs with 8 tonnes load capacity at the gooseneck, 2 x 2 pcs with 8 tonnes capacity at the front ramp, and 2 x 2 pcs with 8 tonnes capacity at the rear section OTHER FEATURES: Chassis colour: Nova grey, galvanized For further information, please do not hesitate to contact us.

Condition: used, maximum load weight: 24,855 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 10/2024, next inspection (TÜV): 10/2025, total width: 2,550 mm, total height: 1,260 mm, Equipment: ABS, Kässbohrer K.SOK Extendable Truck/Car Transporter TECHNICAL DATA: * External length: 13,200 mm * Wheelbase: 8,350 mm * Overall width: 2,550 mm * Fifth-wheel height: 1,000 mm * Axle load: 24,000 kg * Kingpin load capacity: 12,000 kg * Unladen weight ±3%: 11,145 kg * Gross vehicle weight: 36,000 kg * Vehicle extension: 1,800 mm * Bumper extension: 1,200 mm CHASSIS: * Fitted with BPW brand axles, 9,000 kg technical capacity, equipped with air suspension and drum brakes * Last axle self-steering * First axle liftable * Wabco braking system * 12 x 205/65 R17.5 tyres FRAME: * Made of high-strength steel * Front ramps: 2 hydraulic, zinc-plated, folding and sliding ramps, 3,800 mm long (Max. extension angle 2° to 15°), load capacity 7 t each * Middle ramps: 2 hydraulic, zinc-plated, folding ramps, 1,200 mm long (angle 0° to 44°), load capacity 7 t each * Front axle ramp: 1 hydraulic, zinc-plated, folding ramp, 4,000 mm long (angle 0° to 29°), load capacity 7 t * Loading ramps: 2 aluminium loading ramps for loading vehicles onto the truck transporter, measuring 2000 x 400 x 75 mm (L x W x H), with a capacity of 3.5 tonnes each. The ramp angle is 10° with the rear bumper closed and 8° with the bumper extended * Wheel recess: 800 x 460 x 70 mm * Vehicle extension type: 1,800 mm every 300 mm LOAD SECURING: * Lashing rings: 1 pair (8-ton capacity) on gooseneck, 2 pairs (8-ton capacity each) on the front ramps, and 2 pairs (8-ton capacity each) at the rear section OTHER: Chassis color: red For further information, please do not hesitate to contact us. Cjdpfxsw Nly To Ad Nsgt

Condition: new, Year of construction: 2026, THE ECONOMICAL BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with free-standing bending head can be easily converted to right and left bending for difficult geometries. The plug-in bending tools allow quick conversion to other tube sizes. Fast hydraulics to shorten non-productive times is an important factor for series production. The clamping pressure for tube clamping can be optimally adjusted. The PLC control (arbitrarily expandable via USB stick) with data memory and latest X2X interface, can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for max. 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The machine has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. This excludes incorrect positioning within a tolerance window and thus minimizes the user-related error rate. General error messages are displayed on the large screen with full text. The mandrel retraction is programmable and can be retracted automatically ahead of time when the bending angle is reached. The compact drive unit with the detachable mandrel carrier offers advantages for use at the assembly site as well as for special designs with a very large tube feed and is also available as a stationary variant with a tidy system for tools and mandrel bars. The low-cost alternative to the fully controlled CNC machine. POSSIBLE APPLICATIONS: Csdpfjng Exajx Ad Njgt Hydraulic piping Pipeline construction Plant construction, e.g. chemical industry Metal construction Sample construction Technical data: Bending capacity Ø 6 to 50 x 4 mm depending on material bending radius min/max: 10 mm/140 mm Bending radius min: 1,5 x Ø (standard 2 x Ø) Multifunctional machine control Bending angle adjustment (0.1°) Mandrel beam lengths 1500/3000/4500/6000 mm (special version also longer) Maximum 180º bending result Weight 800-900 kg (depending on version) Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: Automatic mandrel lubrication (minimum quantity) Pneumatic or hydraulic quick-action chuck Positioning of length and torsion via automatic brake function or via manual stops by foot switch Semi-automatic positioning of length and rotation via servo motors Pneumatic rotation stop Pipe calculation software Laser-supported tool monitoring for monitoring the tool tension 10 inch touch screen with integrated tube calculation Bending radius up to 250 mm Data transfer via cable (LAN), wireless (WLAN) or USB OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, THE ECONOMICAL BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with free-standing bending head can be easily converted to right and left bending for difficult geometries. The plug-in bending tools allow quick conversion to other tube sizes. Fast hydraulics to shorten non-productive times is an important factor for series production. The clamping pressure for tube clamping can be optimally adjusted. The PLC control (arbitrarily expandable via USB stick) with data memory and latest X2X interface, can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for max. 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The machine has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. This excludes incorrect positioning within a tolerance window and thus minimizes the user-related error rate. General error messages are displayed on the large screen with full text. The mandrel retraction is programmable and can be retracted automatically ahead of time when the bending angle is reached. The compact drive unit with the detachable mandrel carrier offers advantages for use at the assembly site as well as for special designs with a very large tube feed and is also available as a stationary variant with a tidy system for tools and mandrel bars. The low-cost alternative to the fully controlled CNC machine. POSSIBLE APPLICATIONS: Hydraulic piping Pipeline construction Plant construction, e.g. chemical industry Metal construction Sample construction Technical data: Bending capacity Ø 6 to 50 x 4 mm depending on material bending radius min/max: 10 mm/140 mm Bending radius min: 1,5 x Ø (standard 2 x Ø) Multifunctional machine control Bending angle adjustment (0.1°) Mandrel beam lengths 1500/3000/4500/6000 mm (special version also longer) Cedpfxondn Ags Ad Negt Maximum 180º bending result Weight 600-700 kg (depending on version) Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: Automatic mandrel lubrication (minimum quantity) Pneumatic or hydraulic quick-action chuck Positioning of length and torsion via automatic brake function or via manual stops by foot switch Semi-automatic positioning of length and rotation via servo motors Pneumatic rotation stop Pipe calculation software Laser-supported tool monitoring for monitoring the tool tension 10 inch touch screen with integrated tube calculation Bending radius up to 250 mm Data transfer via cable (LAN), wireless (WLAN) or USB OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, PROFILE BENDING ATTACHMENT PB20 The PB20 profile bending attachment is the optimal supplement for tube bending on the 3000 and 6000 models. The device can be easily and quickly mounted on the bending shaft without the use of tools. The workpiece is clamped onto the turntable with the clamping device and pulled around the bending tool. With this system, leg lengths to be bent can be accurately measured in conjunction with a length stop and can be bent with repeatable accuracy. TECHNICAL DATA: - Bending capacity steel 37: 100 x 10 mm, Ø 20 mm. - Many standard tools available - Special tools possible - Sharp-edged tools with bending radius R2 or 5 mm - round tools R 10 to 25 mm for bends max. 260° optional OUR SERVICE: Cgsdpjnh R Ekjfx Ad Njt - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, the mobile bending machine with great performance: The compact, mobile design enables precise and repeatable bending stationary and directly at the installation site up to a tube diameter of 35 mm, CU 42 mm. A powerful three-phase motor and a precision gearbox provide powerful drive. The motor speed is automatically adjusted, resulting in increased return speed and shorter cycle times. Optimum bending accuracy and very high repeatability are achieved by position detection directly on the bending axis. The bending angle is easily and quickly set to 0.5° using pushbuttons. The large LCD display clearly shows the angles. The storage of up to three bending angles enables the rational bending of tubes with different bending results. For transport, the compact unit with accessories can be neatly and safely stored in sturdy transport cases. The "upright tube and rotating tool" principle ensures low space requirements during bending. Sliding shoes are used for thin-walled tubes to enable crease-free bending and to bend bends with the slightest deformations from, for example, stainless steel and copper tubes. With the PB20 profile bending attachment, flat, square and round iron can be bent without problems. POSSIBLE APPLICATIONS: - Hydraulic piping Cedjnfvx Nopfx Ad Nogt - Sample construction - Sanitary and heating construction - Technical data: - Bending capacity Ø 6 to 35 mm, CU Ø 42 mm depending on material. - Bending radius min/max: 36 mm/150 mm - Precise digital bending angle adjustment 0.5°. - Maximum 180º bending result; for special applications Endless operation possible - Hexagonal shaft 40 mm for quick tool change - Safety foot switch with emergency stop function - Alternating current 230 V connection - Weight 29 kg - Frequency converter and three-phase motor - 3 bending angles storable OPTIONAL ACCESSORIES: - Slide shoe holder - double roller holder - Profile bender PB20 - for bending flat and square bars up to max. 80 x 8 mm, round bars up to max. 20 mm - tripod base - machine case - tool case - Small bending device KBV - Special tool according to specification OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, machine/vehicle number: 1018, THE POWERFUL BENDING MACHINE FOR EXTREME USE: The compact bending machine enables precise and repeatable bending up to an outer diameter of 100 mm stationary and directly at the assembly site. Transport is possible with lift trucks or the optional rollers. A powerful three-phase motor and a precision gearbox provide a powerful drive. The machine convinces with its compact and slim design as well as the very free bending range. Optimum bending accuracy is achieved by position detection directly on the bending axis. The bending angle is set easily and quickly via a convenient and menu-driven user interface in 14 languages with touchscreen control, which guarantees even more intuitive operation. For more complex bending tasks, 100 bending programs can be stored, with an angle sequence of max. 8 bends per geometry. The multifunction control allows variable adjustment of the bending speed for forward and backward travel, and a parameterizable overbending function is provided to compensate for material springback.With the help of the four material characteristics, the material is automatically overbent to the required bending angle, thus realizing an exact bending result. The principle of "stationary tube and rotating tool" ensures low space requirements during bending. Sliding shoes are used for thin-walled tubes to achieve a wrinkle-free bending result and to bend bends with minimal deformations from e.g. stainless steel and copper tubes. With the profile bending attachment PB20 flat, square and round bars can be bent without any problems. Extremely small bending radii are made possible with the KBV small bending attachment. POSSIBLE AREAS OF APPLICATION: - Plant engineering - Hydraulic piping - Meander bending - prototyping - Sanitary and heating engineering - shipbuilding TECHNICAL DATA 10000: Bending capacity: up to 100 x 5 mm, 55 mm solid material three-phase current 400 V Cedpfxendk N Ao Ad Nsgt - Bending radius up to 500 mm - Multifunctional machine control Bending angle adjustment (0,1°) - Maximum bending angle 240 - Safety foot switch with emergency stop - Weight 600 kg OPTIONAL ACCESSORIES: - Adapter system for tools from model series 3000/6000 with bending radius from 45 mm, incl. hexagonal shaft 40 mm - Profile bender PB20 - for bending flat and square bars up to max. 100 x 10 mm, round bars up to max. 20 mm - Small bending device KBV - Special tools according to specification - Software adaptations for special tasks OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, machine/vehicle number: 1018, THE MANDREL BENDER WITH MANUEL CLAMPING: This mandrel bending machine with manual eccentric quick clamping for tube fixing enables rational bending. The compact drive unit with the detachable mandrel carrier offers advantages when used at the assembly site. Optimum bending accuracy is achieved by position detection directly on the bending axis. The bending angle is set easily and quickly via a convenient touchscreen control with menu-driven user interface. The comfort control allows two speeds as well as a parameterizable overbending function to compensate for material springback. The bending sequence is significantly shortened by automatic "free travel" at the end of the sheet. For more complex bending tasks, bending programs can be stored with a maximum angle sequence of 50 bends per geometry. An almost unlimited number of programs can be stored on the control or a USB stick, as well as 200 materials. The plug-in bending tools allow rapid conversion to other tube sizes. For difficult geometries, the bending direction of the machine can be changed to right or left bending as standard. The open bending unit allows, for example, the bending of railing frames with only one weld seam. The optional calculation software on the PC determines the cut length for the entire geometry as well as the travel distance, twisting angle and bending angle for each bend. The mandrel retraction is programmable and can be retracted automatically ahead of time when a bending angle is reached. POSSIBLE APPLICATIONS: - Plant engineering, e.g. chemical industry - hydraulic piping - prototyping - Pipeline construction TECHNICAL DATA: Cgjdonfvy Uopfx Ad Not - Bending capacity Ø 6 to 50 mm - bending radius min/max: 10 mm/140 mm - Bending radii 2 x D - multifunction machine control bending angle adjustment (0,1°) - mandrel beam lengths 1500/3000/4500/ 6000 mm (special version also longer) - Maximum 180º bending result - Weight 300-500 kg (depending on version) Optional accessories: - Automatic mandrel lubrication (minimum quantity) - Digital displacement measurement for length and twist (resolution 0.1 OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, THE ECONOMICAL MANDREL BENDING MACHINE FOR TIGHT BENDING RADII. For tube dimensions from 20 - 90 mm, this bending system offers solutions for complex geometries with standard radii of 2xD. Depending on material quality and wall thickness ratio, radii of 1.5xD can also be realized suitable for series production. With a tool height of 120 mm, there are also sufficient options for special profiles. The extremely precise and powerful electric drive of the bending axis as well as the stable and rigid construction of the mandrel carrier and the bending arm also contribute to the desired bending result. The plug-in bending tools allow a quick changeover to other tube dimensions. The clamping pressure for the tube clamping can be optimally adjusted. The PLC control (can be expanded as required via USB stick) with data memory and the latest X2X interface can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for a maximum of 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The control system has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. Also available with pneumatic rotation stop or with gear-assisted length and twist positioning. POSSIBLE AREAS OF APPLICATION: - Plant engineering, e.g. chemistry - hydraulic piping - metal construction- prototype construction- pipeline construction TECHNICAL DATA: Bending capacity 7000: Ø 20 to 70 x 5 mmbending capacity 9000: Ø 20 to 90 x 5 mm depending on the material- bending radius min/max: 40 mm/250 mm- Bending radii min: 1.5 x Ø (standard 2 x Ø ) - Multifunction machine control Bending angle adjustment (0,1°) - Mandrel support lengths 3000/4500/6000 mm - Maximum 180º bending result - Weight 1600-3200 kg (depending on version) - Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: - Automatic mandrel lubrication (minimum quantity) - Pneumatic or hydraulic quick chuck - Larger bending radius up to 300 mm - Positioning of the length and twist via automatic brake function or via manual stops by foot switch - Semi-automatic positioning of the length and twist Cgedpfx Ajnh R Sued Njt via servo motors - Automatic tool retraction - Pipe calculation software - 10 inch touch screen with integrated tube calculation - Data transfer via cable (LAN), via radio (WLAN) or USB OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via - the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, THE PRACTICAL HAND BENDING DEVICE: The compact, mobile design allows precise and repeatable bending in the vice. Drive is provided by a screw-in handle. A lockable adjusting ring ensures repeatable bending. The exchange of the plug-in tools is conceivably simple. The principle of "stationary tube and rotating tool" allows bending with the smallest possible footprint. For thin-walled tubes, sliding shoes are used for crease-free bending in order to produce bends with the least possible deformation from, for example, stainless steel and copper tubes. The optional version with a hexagonal mount allows the drive force of the 3000 and 6000 bending systems to be used in addition to the vise. For this purpose, the KBV is simply placed on the bending shaft of the machine. POSSIBLE APPLICATIONS: - Hydraulic piping - prototype construction - Sanitary and heating construction TECHNICAL DATA: - Bending capacity Ø 6 to 18 mm - Manual bending angle limitation - Maximum 180º bending result OPTIONAL ACCESSORIES: - KBV with hexagonal fixture for bending on model 3000 or 6000 - Machine case - Length stop OUR SERVICE FOR YOU ON SITE: Cgsdpjng Amksfx Ad Njt - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, THE PRECISION 3-ROLL BENDING MACHINE When developing the compact and mobile horizontal bending machine, the focus was clearly set on the production of dimensionally accurate coils such as handrails for spiral staircases. This is the supreme discipline, since two mutually influencing variables (radius and pitch) must be combined in a bend to form a dimensionally accurate geometry. The interaction of tube calculation on the PC, implementation on the bending machine, and control via the measuring equipment with final correction of the bending values ensure accurate bending. By simple and few inputs into the PC tube calculation program, the local printer provides a printout and supports the calculation of all necessary bending and correction data to operate the machine. A new powerful drive concept allows infinitely variable adjustment of the bending speed, requiring only a 230 V (AC) connection. Hardened steel tools as well as hard plastic tools that are gentle on the surface are available for selection. To ensure optimum feed even with tight bending radii, all three bending shafts are driven. The drive concept also proves its worth in tough daily use on the flat, when bending tubes and profiles. Customers of the 4800, 5000 and 6000 bending system have the option of purchasing the roller bending unit without the drive. The roller bending unit with the designation RB43, can be adapted to the bending systems 4800, 5000 and 6000 via the bending shaft. In this case, the machines act as a drive unit. POSSIBLE APPLICATIONS: - Handrails/bottom rails for spiral staircases - Large tubular profile bends - General metal construction TECHNICAL DATA: - Bending capacity Ø 10 to 60 mm - bending radius min: 300 mm at Ø 42,4 mm - Bending direction right and left Csdpfx Aeng A R Sjd Njgt - Digital bending adjustment for radius and pitch - Safety foot switch with emergency stop function - Maintenance-free robust three-phase motor - Construction site suitable 230 V connection - Weight 280 kg OPTIONAL ACCESSORIES: - Support roller - for stabilization - Lifting roller - to produce controlled slope - MGR - measuring device to determine the correct radius - MGV - measuring device to determine the correct slope based on torsion - MPW - PC calculation program to determine the correct bending values - RB4303 - universal bending tool for profiles up to 60 mm height - Tools for special profiles OUR SERVICE FOR YOU ON SITE: - Welcome to the test production in our house in the demo room - Consultation-information meeting at your site - Consultation and handling as leasing/financing purchase via - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, machine/vehicle number: 1018, THE POWERFUL BENDING MACHINE FOR WORKSHOP AND ASSEMBLY. The compact and mobile bending machine enables precise and repeatable bending up to an outer diameter of 60 mm stationary and directly at the assembly site. A powerful three-phase motor and a precision gearbox provide a powerful drive. Optimum bending accuracy is achieved by position detection directly on the bending axis. The bending angle is set quickly and easily via a convenient, menu-driven user interface with touchscreen control, which guarantees even more intuitive operation. For more complex bending tasks, 100 bending programs can be stored, with an angle sequence of max. 8 bends per geometry. The multifunction control allows variable adjustment of the bending speed for forward and backward travel, and a parameterizable overbending function is provided to compensate for material springback. With the aid of the four material characteristics, the material is automatically overbent to the required bending angle, thus realizing an exact bending result. The "stationary tube and rotating tool" principle ensures low space requirements during bending. Sliding shoes are used for thin-walled tubes to achieve a wrinkle-free bending result and to bend bends with minimal deformations from e.g. stainless steel and copper tubes. With the PB20 profile bending attachment, flat, square and round bars can be bent without any problems.Extremely small bending radii are made possible with the KBV small bending attachment. Cgodong Ax Sopfx Ad Nst POSSIBLE AREAS OF APPLICATION: - Plant engineering- Hydraulic piping - Meander bending- prototyping- Sanitary and heating construction TECHNICAL DATA: Bending capacity 6000S: Ø 6 to 50 x 4 mm alternating current 230 V Bending capacity 6000D: Ø 6 to 60 x 4 mm Bending capacity 6000DS: Ø 6 to 60 x 5 mm three-phase current 400 V Bending capacity 6000D: Ø 6 to 60 x 4 mm three-phase 400 V - Bending radius min/max: 36 mm/280 mm - Optional large bending radii up to 500 mm - Multifunction machine control Bending angle adjustment (0.1°) - Maximum bending angle 240 - Hexagonal shaft 40 mm for quick tool change - Safety foot switch with emergency stop - Weight 110 kg OPTIONAL ACCESSORIES: - Profile bender PB20 - for bending flat and square iron up to max. 100 x 10 mm, round iron up to max. 20 mm - Roller bender RB43 - The RB43 is placed on the 6-edge shaft of the bending axis. By switching over to endless bending, the bending system acts as a drive unit. - Small bending device KBV - Special tool according to specification OUR SERVICE FOR YOU ON SITE: - Welcome to the test production in our house in the demo room - Consultation-information meeting at your site - Consultation and handling as leasing/financing purchase via - Service contracts, maintenance at your site

Condition: used, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 03/2018, loading space length: 13,800 mm, loading space width: 2,450 mm, loading space height: 3,000 mm, Equipment: ABS, Moetefindt Closed Car Transporter * Motorsport car transporter Cjdpfx Adsy H Tm Re Negt * Body: Moetefindt * First registration: 13.03.2018 * Unladen weight: 8,200 kg * Permissible total weight * ABS * EBS * BPW axles * Hydraulic tail lift * Lashing systems * 2x portal doors left * 2x portal doors right * Winch * Additional storage space for tools and spare parts * 2 axles, air suspension * Work lamps in loading area Dimensions (cargo area/loading platform) Cargo area length: 13,800 mm Cargo area width: 2,450 mm Cargo area height: 3,000 mm Tires: 1st axle: 205 / 65 R22.5 air suspension / 35% 2nd axle: 205 / 65 R22.5 air suspension / 35% ----Price: ,- Euro + 19% VAT. For further questions you can reach us at the following numbers: We speak: German, English, French, Polish, and ????? Subject to errors, omissions, and prior sale.