Used Centauro Bandsaw Centauro Co 700 for sale (33,068)

Condition: new, Year of construction: 2024, Gold River SWZ-700 water separators Application description: The GOLD RIVER SWZ series separator has been designed for special tasks, it can cope with the most difficult materials that contain many properties that disturb the separation process in separators commonly available on the market. SWZ water separators separate heavy fractions (non-ferrous metals) from, among others, plastics in the process of recycling secondary raw materials. SWZ separator equipped with a four-section copper water system equipped with radial nozzles with variable linear geometry. The separator uses the latest divided type of separation mat. The development of a modern module for preliminary division and preparation of material guarantees the purity of recovered raw materials in a very short time (plastics, metals). Why a water system? Our device uses a system similar to that used in the gold recovery industry. We use water as a carrier and a force that affects the materials in a gentle way. In the water system, all particles with higher mass are gently washed out and separated, generating no losses during the entire separation process. The properties of water together with our proprietary solutions are unrivaled compared to, for example, air separators. SWZ type separators are used: Separation of heavy from light materials (metal granulates contaminated with plastic, foil, paper, cotton, fibers) Cleaning plastics after air separators (dry) Separation of metals in cable and non-ferrous metal recycling lines The SWZ-700 water separator, thanks to the use of the latest module, performs the separation process in a very short time, therefore it is characterized by a high hourly efficiency of separated material of approximately 1200 kg/h. Description of action: The material fed into the separator goes through the transport channel to the module for initial fraction division into its mass and humidity changes. Some of the material is separated at this stage. In the second part of the module, the humidity of the remaining batch changes. Then the material falls onto the separation table where the final fraction separation takes place. As a result of this process, we obtain valuable materials from both sides of the separator. Construction description: The massive structure and the inertial drive of the separator are made of materials appropriately selected to withstand the overloads resulting from vibrations. The supporting frame ensures excellent stiffness and failure-free operation for many years. Due to the type of vibration drive, the design does not require the installation of a soil separator. Separation table equipped with hydraulic adjustment of the angle of inclination. The separation table has a special module for initial division of fractions into their mass and preparation for final separation. The water system has several water pressure valves. The water circulation in the separator is closed. There is no need for constant access to an external water source because the device works using the water already in the tanks. Based on experience and continuous research in our laboratories. We are able to provide you with separators individually adapted to the specific nature of the material being separated. In various versions and sizes. SWZ-700 separators are manufactured to individual order. Bledpfjua Tbwjx Ahmon

Condition: used, Year of construction: 2013, A versatile and flexible NC controlled machining centre suitable for a variety of machining operations including hinge recessing, lock slots, handle holes, key slots and euro grooves etc. Programming is extremely simple thanks to the colour graphic touch screen controller using pre-installed electronic macros. As standard the machine is equipped with one milling head that automatically moves for either vertical or horizontal machining. It also has interpolation of the axis. Specification Axis capacity - X 2800mm, Y 180mm, Z 150mm. Bsdpfx Ajzzwg Uehmjln (2400mm X capacity when optional drilling head fitted). 1 x ER32 collet for milling cutter 16mm max. dia. Max working table dimensions - 3000x618mm X axis positioning speed 35m/min. Y axis / Z axis positioning speed 6m/min. Retractable pneumatic positioning stops 2 off - on front of table Adjustable pneumatic workpiece clamps x 3 - mounted on rear of table. Left hand side ref. stop. Front table extension supports x 2 Router motor power 3.3kw. Router motor RPM 0-18,000 rpm. Touch screen controller - Elco Power 1000. Dust extraction outlet x 1 80mm dia, 2 x 100mm dia CE side and rear safety guards with front light curtain. With following options fitted : - Pneumatic tool change ISO 30 - Drilling unit with ER25 collet. - Extended Y axis stroke 400mm - Increased clamping capacity 200mm. Year - 2013 CE Compliant Serial Number - 22170

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in stips / lippings (min/max) mm 0.8 / 20 Panels thickness (min/max) mm 8 / 60 Bsdpfx Aoyxl Sijhmeln Numerical Control ICOS Open Feeding speed (adjustable) m/min 6 - 30 Top pressure system with rubber belt Safety and sound-proof enclosures/cabins OPTIONAL: Panels in-feed system 63.152 (mm 500 x 500) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 08.379 (2 x Kw 4,0) adjustable by N.C. Glueing Unit (EVA Glue) 283.1513 Band Pressure zone + Edge coils supporting unit (No. 1+2 reels) Snipping (end-cutting) unit 08.42/30/B (Kw 0,66 x 2) speed 30 m/min (0°-25°) Fine Trimming unit 08.055 (Kw 1,85 x 2) 0°-25° Multi Function Unit (Profile contour Trimming unit) SKF-L (2 x Kw 0,18) + (2 x Kw 0,4) Profile edge scraping unit 08.519 Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.617-2 (Kw 0,18 x 2)

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, For sale is a professional, heavy-duty band resaw (slitting saw) from the renowned Italian manufacturer CENTAURO S.p.A., model SUPERCUT 80. The machine was manufactured in 2014 and comes from a line of technologically advanced saws designed for extremely precise cutting of wood into thin strips and veneers. Thanks to its robust construction and high frame rigidity, it guarantees perfect cutting geometry while maintaining high performance. Full technical specifications (from the nameplate): Manufacturer: CENTAURO S.p.A. (Italy) Model: SUPERCUT 80 Year of manufacture: 2014 Main motor power: 15 kW (approx. 20 HP) – ensures stable operation even with hard exotic wood species and oak. Wheel speed: 680 rpm Blodszti T Rspfx Ahmjn Diameter of cast iron wheels: 800 mm Certificate: CE (full documentation and compliance with safety standards)

Condition: new, Year of construction: 2018, operating hours: 7 h, ABB IRB6700-205/2.80 + IRC5 controller + TPU DEVELOPMENT OF GSG ROBOTICS Bodpfx Ahezxblcomsln GSG Robotics GmbH, founded in 2005 in Gütersloh, has been based in Marl since 2015, serving a large area for robot maintenance and repair. Over the years, we have evolved into a comprehensive partner for all aspects of industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers, ABB and Fanuc.

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in stips / lippings (min/max) mm 0.8 / 20 Panels thickness (min/max) mm 8 / 60 Numerical Control ICOS Open Feeding speed (adjustable) m/min 6 - 30 Top pressure system with rubber belt Safety and sound-proof enclosures/cabins OPTIONAL: Panels in-feed system 63.152 (mm 500 x 500) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 08.379 (2 x Kw 4,0) adjustable by N.C. Glueing Unit (EVA Glue) 283.1513 Band Pressure zone + Edge coils supporting unit (No. 1+2 reels) Blsdpfxoyk Tkvo Ahmjn Snipping (end-cutting) unit 08.42/30/B (Kw 0,66 x 2) speed 30 m/min (0°-25°) Fine Trimming unit 08.055 (Kw 1,85 x 2) 0°-25° Multi Function Unit (Profile contour Trimming unit) SKF-L (2 x Kw 0,18) + (2 x Kw 0,4) Profile edge scraping unit 08.519 Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.617-2 (Kw 0,18 x 2)

Condition: used, Year of construction: 2001, functionality: fully functional, CENTAURO SL 3000 longitudinal cutting saw Cutting length: 3400 mm Cutting width (max.): 600 mm Bjdpfxezmf Ide Ahmsln Cutting height (max.): 160 mm Saw blade diameter: 550 mm Main motor power: 11 kW Feed rate: up to 80 m/min Machine dimensions: 5285 x 1532 x 2150 cm (H) Weight: 1500 kg Year of manufacture: 2001

Condition: used, machine/vehicle number: 006089, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 30 m/min Maximum panel thickness: 60 mm Bljdpjy Nknwsfx Ahmon Operating Units: 8 nr

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, minimum blade thickness: 2 mm magnetic position sensor for the guide adjustable spacing of the feed rollers material detection sensor belt cooling/lubrication system wheel diameter: 800 mm motor power: 15 kW smooth feed speed adjustment pneumatic pressure on the feed rollers control panel with a color touchscreen display screw-type belt centering pneumohydraulic belt tensioning year of manufacture: 2017 total weight: 1300 kg power supply: 380V Bodpfx Ahszdy N Dsmsln

Condition: excellent (used), Coating and packaging line with thermo-shrinkable film, consisting of: a) Double conveyor belt (mm 3000 x mm 1100) for application of corner protections. - Adjustable feeding speed from 3 to 15 m/min. b) Stretch wrapping machine Mod. Compact 250/6R with motorized conveyor belt - Total length of the machine (with motorised belt) mm 7600 approx. - Reel holder (6 upper reels max width mm 2450 + 6 lower reels max width mm 1450) - Slitter and transversal welding machine (mm 2500) - Max useful height mm 700 - Installed power KW 12 - With automatic device to pack light pieces (from 1 to 5 Kg) by welding bar c) Shrinking tunnel total length about 4700 mm (of which about 3700 mm are of the tunnel) with hot air circulation (heating by electric resistances and fan), total installed power KW ? - conveyor with metal rods (width mm 1500 approx.) - Max useful height mm 700 Bjdpfx Ajgp Diaohmeln - Adjustable feed speed from 4 to 20 m/min d) Outlet roller conveyor "ELME" (idle rollers) for cooling (mm 3000 x 1500 ca.)

Year of construction: 1990, condition: used, ENGEL - ES 700/150 150 ton, 392 cm³, Strok: 420 mm Bodpfx Ahezxrd Aomoln

Condition: good (used), Year of construction: 2024, machine/vehicle number: 20660471, Offer 24143 Technical data: Blsdpfx Aetx T Anohmsn - Vertical version - Max. operating pressure 15 bar - Fully galvanized pressure tank / boiler - Pressure tank capacity 270 l - Suction volume 500 l/min - Delivery volume 470 l/min - Compressor speed 940 rpm - Cylinder stages 2 - 2 - Drive 400 V / 4.0 kW - Pressure gauge - 3 swing feet - Boiler diameter approx. 600 mm - Space requirement approx. W 800 x H 1850 x D 800 mm - Weight approx. 240 kg

Condition: used, functionality: fully functional, For sale is a working sharpening machine /Rondamat 940 (model -R 934) with Opticontrol measuring stand (model 970070). Bodpfszna Tqsx Ahmeln

Condition: not inspected (used), Year of construction: 2014, functionality: unexamined, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, feed rate X-axis: 30 m/min, controller model: ICOS OPEN, The machine has the following configuration: Unit: Pre-milling Manufacturer model: 08.379 Motor power: 4 kW Speed: 8,800 rpm Unit: Cut-off saw unit Manufacturer model: 08.42 / 30 / B Number of motors: 2 Motor power: 0.660 kW Unit: Corner rounding unit Manufacturer model: 08.055 Number of motors: 2 Motor power: 1.850 kW Speed: 12,000 rpm Bedpoyzy Iwefx Ahmeln Unit: Profile trimming unit Manufacturer model: SKF-L Number of motors: 4 Max. machining speed: 20 m/min Motor power: 0.180 kW Speed: 12,000 rpm Unit: Scraper blade unit Manufacturer model: 08.519 Unit: Glue scraper unit Manufacturer model: 08.521 Unit: Brushing unit Manufacturer model: 08.617-2 Number of motors: 2 Motor power: 0.180 kW Speed: 1,400 rpm TECHNICAL DETAILS Min. panel height: 8 mm Max. panel height: 60 mm Min. panel length: 150 mm Min. panel width: 65 mm Min. edge thickness: 0.3 mm Max. edge thickness: 20 mm Max. feed speed: 30 m/min MACHINE DETAILS Control: ICOS OPEN EQUIPMENT Magazine for coil material Tank for hot-melt adhesive Edge pressure roller unit Pressure by rubberized belt The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of descriptive character. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and operation of the machine at the destination. External reference: 6089

Condition: excellent (used), table dimensions: 1170x800 maximum cutting width: 780 mm maximum cutting height: 480 mm flywheel diameter: 45 mm weight: 820 kg Bljdpfx Aezvn Sdehmon year of manufacture: 1998 power: 5.5 kW speed: 690 RPM CE marking

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 11.176, center height: 250 mm, overall weight: 280 kg, spindle speed (max.): 3,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum height: 250 mm Center distance: 1,600 mm Spindle speed: 400–3,000 rpm MACHINE DETAILS Connected load: 3 kW Voltage: 400 V Fuse rating: 16 A Dimensions & Weight Dimensions (L × W × H): 2,460 × 440 × 1,220 mm Dry weight: 280 kg Shipping packages: 1 unit EQUIPMENT CE marking Blsdpjzzbc Hjfx Ahmjn

Condition: used, Year of construction: 2006, total width: 440 mm, total length: 2,460 mm, total height: 1,220 mm, Colour: White Empty weight: 280 kg - Year: 2006 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 11176 - Center height [mm]: 250 - Center distance [mm]: 1600 - Min. spindle speed [rpm]: 400 - Max. spindle speed [rpm]: 3000 - Voltage [V]: 400 - Fuse [A]: 16 - Power [kW]: 3.0 Bljdpfx Ajzy Nb Ujhmen - Transport dimensions: 2460mm x 440mm x 1220mm (l x w x h) - Transport weight [kg]: 280kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2017, Well-maintained Palfinger PK 27001 EH loading crane from 2017 with remote control. This powerful loading crane is ideal for mounting on a truck and is perfect for construction, transport, recycling, and industrial applications. Thanks to its high lifting capacity, a horizontal reach of approximately 8 meters, and the precise remote control, this Palfinger is suitable for numerous professional applications. A reliable and versatile loading crane, ready for immediate use. Specifications Palfinger PK27001 EH Year of manufacture: 2017 2x hydraulically extendable 6200 kg at 4 m reach 4200 kg at 6 m reach 3200 kg at 8 m reach With remote control Bsdpfx Ajz Hpgnehmeln About Cevoman ✔ More than 45 years of experience with trucks and commercial vehicles ✔ Technically inspected by our own workshop ✔ Specialist for MAN trucks, loading cranes, and container systems ✔ COP-certified ✔ Experience in worldwide export ✔ Personal service and professional advice Cevoman bv. Lenskensdijk 5 2200 Herentals Belgium

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Description AS NEW CONDITION WORKS IN PRIVATE WORKSHOP FROM NEW. Working mode: Semiautomatic Machine type: Horizontal bandsaw Cut: Straight cut Mitre cuts range: 0° Drive: 4 kW, 3x400 V/50 Hz Saw band speed: 20 - 120 m/min. Saw band dimensions: 4 580 x 34 x 1,1 mm Bodpfx Ahsvk R R Njmjln Material loading height: 780 mm Length: 2 172 mm Width: 1 197 mm Height: 1 771 mm Weight: 800 kg This universal semiautomatic bandsaw of a double-column construction, designed for perpendicular cuts of materials up to 280 mm in diameter, provides high quality at an affordable price. The saw arm is guided by two robust columns and laid on preloaded, no-clearance linear guiding on one side and on auxiliary guiding on the other side. The excellent cutting performance results from these features: a three-sided hardmetal precision guide of the 34 mm high saw band and synchronous running brush for chips removal. Material clamping is performed by a full-stroke sectional vice. The material feed is manual. The cut material outlet is fitted with a slide. The saw band drive is equipped with a frequency convertor that allows the band’s optimal speed to be set against the processed material within the 20-120 m/min range; this significantly increases both the saw band lifetime and the machine productivity. Further, the band is tilted against the vice load surface at 2° angle, which also significantly reduces cutting times and contributes to a longer band lifetime. Thanks to their arms rigidity, double-column bandsaws with a fixed arm position achieve much shorter cutting times (especially in cutting full materials) than machines with articulated saw arms. Key features Both-sided linear guiding of the saw arm Arm laid on linear guiding Automatic downfeed pressure regulation Simple and clearly arranged control

Condition: used, This Océ multifunction printer, model: Océ ColorWave 700, will be auctioned off online as part of our industrial auction/machine auction at the Siemens Printing Center – offering printing supplies, machinery, and office equipment. You can find this and many other items on our platform. Bljdpjz H Snnefx Ahmen

Condition: good (used), Renz Autobind AB 700 + KAS 500 Semi-Automatic Spiral Binding Machine Machine in very good condition, ready to operate. Efficient semi-automatic machine for the production of calendars, notebooks, and other metal spiral-bound products. Fast operation Spin diameters range from 3/16″ to 1 1/8″ Working width up to 700 mm Crimping thickness approx. 23 mm Capacity up to 1200 cycles/hour The semi-automatic machine unwinds the spiral from the spool, counts the stitches, cuts the spiral to the pre-set stitch count, and transfers the spiral section to the crimping area. The operator places the pre-perforated calendar on the table. The calendar is automatically transferred to the crimping area by pressing the pedal. Includes a KAS 500 hanger feeder Power supply: 230V + compressed air Blodsz Dtbkopfx Ahmon Weight: 615 kg.

Condition: used, Year of construction: 1998, This model of machine is fitted with 2 independent sensitive hydraulic copy units that can work from either a template or sample. The first cutter would be set for roughing out, the second one for the finishing cut that will enable a component to be produced in one pass. There is still the possibility to programme a second automatic pass of the finishing gouge for heavy work. The machine is also equipped with hydraulic tailstock unit and hydraulic operated back knives. Year - 1998 CE Bedpfozd Uv Ejx Ahmeln The unique feature of the T5E is saddle movement by precision recirculating ball screw with programmeable electronic control to the feed speed to ensure optimum turning flexibility and quality. This precision feature allows the operator to perfectly control the saddle advance in relation to the complexity of the turning and the optimized saddle speed can then be stored within the memory of the machine. 2000mm turning capacity between centres NC electronic control to saddle movement with infinitely variable feed 0 to 12m/min Two speed 4/5.5hp motor giving six spindle speeds 900-1500-1800-2250-3000-4500rpm Two Hydraulic Copy Units each mounted with horizontal vee type gouges hss 2 Vertical back slides with knives for making dowel ends Max 95mm x 95mm square section with revolving Steady Max 175mm x 175mm square section without Steady Sliding guard for operator protection CE safety equipment

Condition: good (used), functionality: fully functional, type of input current: three-phase, A very nice machine with the added benefit of the infeed wheel (or roller) on the Centauro R800 resaw acts as a mechanical hand. It pushes wood into the blade. This creates even cuts and smooth surfaces. It also helps you safely cut very thin, uniform pieces. Bodpfx Ahszifn Aemjln

Condition: new, Year of construction: 2025, - Smooth feed speed adjustment: 30 m/min - Feeding table with rollers - Maximum cutting width: 210 mm - Maximum cutting height: 38 cm Bodpfx Ajzxxt Rshmoln - Year of production: 2025 - new - Main motor power: 11 kW - Maximum saw length: 5530 mm - Minimum saw length: 5380 mm - Wheel speed: 680 RPM - Weight: 880 kg

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Pegas 500 X 750 Horizontal X-NC 2000 Automatic Bandsaw- Year 2016 500mm Diameter Tube / 400mm Diameter Solid Bar. 750mm x 480mm Sections. +/- 45 and 60 Degrees. 4000mm Feeder arm. Blodpfsz Hfftjx Ahmon