Used Cloos Protective Gas Welding Machine for sale (77,600)

Condition: ready for operation (used), Year of construction: 2012, number of axes: 10, Welding robot manufactured in 2012. This CLOOS C50 welding cell features a QRC 350 robot model and includes a Qineo Pulse 450 welding power source. The system is equipped with a linear track axis configuration, mechanical torch cleaning station, and dual-station components. It also has protective safety enclosure fencing and rotatable workpiece positioners. If you are looking to get high-quality welding capabilities, consider the CLOOS C50 welding cell we have for sale. Contact us for further details. - Robot Model: QRC 350 (girOX QRC 350)- Control Version: QC6- Welding Power Source: Qineo Pulse 450 (CAN)- Power Supply: 400 V / AC, 3-Phase, 50 Hz- Connected Load: 12 kVA (System Sheet specifies 45 kVA max system load capability)- Back-up Fuse Required: 25 A (System Circuitry specifies max 63 A)- Control Cabinet Dimensions: 800 mm x 1900 mm x 600 mm- Control Cabinet Weight: 300 kg- Peripheral Components Included:* Linear track axis configuration* Mechanical torch cleaning station* Dual-station components (Station 1 & Station 2 Manax operating pendants)* Dual safety light curtains (Leuze MLD310 / 0-8 Meter)* Protective safety enclosure fencing with automated swing doors* Rotatable/tiltable workpiece positioners (Positioner 1 Axis 8/9 & Positioner 2 Axis 10/11)* Grounding cable assembly: 95 mm²* Potential equalization wiring: 50 mm²- Pneumatic Requirements: Compressed air supply approx. 6 bar, integrated regulator set to 5.5 bar Hnjdpezg Ht Iefx Akreu

Condition: new, HAHN-Automation Type: BDE11154003 Resistance welding system The system is designed for the automated resistance welding of the following components: Housing + QLT Housing + Heater Service Unit P450 Welding pump + Flange P 800 The system is manually loaded and unloaded by an operator. Any other use of the system than that described above is not intended and is therefore not permitted! System layout Welding unit Sledge unit Cleaning unit for welding electrode Base Linear unit Analysis unit DMC Dimensions (l x w) mm 1700x1200 Cycle time sec. ≤ 30 - 35 Technical availability % ≥ 95 Operator 1 Voltage V 400 AC Frequency Hz 50 Control voltage V 24 DC Fuse A 50 Rated current A approx. 17 Compressed air supply bar 6 Year of manufacture 2020 System components - Control cabinet - Protective enclosure - Linear unit Timing belt axis Festo DGE-25-700-ZR-LKRV Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN Gear ratio i=5 Feed constant = 63 mm/rev Reference switch: BES 516-324-G-E5-C-S49 - Sledge unit Balluff BES M08EC-PSC15B-S49G - Evaluation unit DMC: Keyence SR-1000 - Welding unit Spindle axis horizontal Compact module CKK 110-250 without brake Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Spindle axis vertical Compact module CKK 110-100 with brake Bosch servo motor: MSK030C-0900-NN-M1-UG1-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Welding tongs Crede PSZ-K Controller: ST-T13V2.0 Power supply: LT-L05-T13V13.0 (5,000A) Water cooler: DLK 1002-C Interface: ProfiNet Proportional control valve block PVB V1.0 Adapter box AB V3.0 for SZ and PSZ Extraction system TBH GmbH GL 265 Z Flow monitor Turck GmbH & Co. KG FCS-M18-AP8X Condition: unused, machine has never been used in production Condition: used Scope of supply: (See image) Hnodpfx Akjzd Rmgsrsu (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, WELIDING WORK STATION SCHLATTER WITH NEW MIYACHI WELDING CONTROLS. 1. 56 kWA - SERIAL NR: PS1/3111/9955 - MIYACHI DIGITAL CONTROLS 2. 80 kWA - SERIAL NR: PS1/9231/9956 - ORIGINAL SCHLATTER ANALOG CONTROLS Included with safety glass and two button pust operational system. with all safety system integrated and working table. WELDING NOMINAL POWER - 56 kWA AT 50% THROAT IN 450mm Specifications Manufacturer SCHLATTER Model P1-42-11-22 1C VU122S S55S Year 1989 Condition Used Stock Number 0048 Connection 380V/50Hz S max 135 kWA Arm distance min /max 218/468 in mm Closing force 4KN Hnjdpfx Aovk Ukmekrju Cooling water requirement 6 liter / min

Condition: good (used), MERKLE Insquare W 300 AC/DC Welding Machine with original hose kit Primary: Voltage: 3 x 400 V Frequency: 50 (60) Hz cos phi: 0.95 TIG DC range: Open-circuit voltage: 80 V Working voltage: 10-22.8 V Welding current: 5-320 A Duty cycle 60% (10 min.) 320 A Duty cycle 80% (10 min.) 300 A Duty cycle 100% : 260 A (40°C) Primary continuous power: 9.5 kVA Primary continuous current: 13.7 A Primary peak current: 19 A TIG AC range: Open-circuit voltage: 80 V Working voltage: 10-22.8 V Welding current: 5-320 A Duty cycle 60% (10 min.) 320 A Duty cycle 80% (10 min.) 300 A Duty cycle 100% : 260 A (40°C) Primary continuous power: 9.5 kVA Primary continuous current: 13.7 A Hjdpfx Ael Sm Hbjkrenu Primary peak current: 19 A Electrode welding: Electrode diameter: 1.5-6 mm Open-circuit voltage: 80 V Working voltage: 20-32.8 V Welding current: 5-320 A Duty cycle 60% (10 min.) 320 A Duty cycle 80% (10 min.) 300 A Duty cycle 100% : 260 A (40°C) Primary continuous power: 13.1 kVA Primary continuous current: 19 A Primary peak current: 22 A Welding processes: Selector switch, 10 levels: TIG DC Negative, TIG DC Positive, TIG DC Negative with start pulse, TIG AC low-noise, TIG AC Rectangular, TIG AC "Balanced TIG", Electrode Negative, Electrode Positive, Electrode "Sine wave", Electrode Rectangular Selector switch 1, 10 levels: Current 1, Time 1, Ramp-up and ramp-down time, Start current, End current, Ignition pulse, Spot time, Pre-flow and post-flow time Selector switch 2, 9 levels: Current 2, Time 2 (for pulse operation), AC Balance, AC Frequency, Hot start time and current, Current regulation, Electrode diameter, Display U Settings: 2 potentiometers for selector switches 1 and 2 Displays: 2 LED displays with preview and hold function for current, voltage, time, frequency Time functions: Selector switch, 4 levels: OFF, Pulse slow, Pulse fast, Spot welding Ignition: Selector switch, 4 levels: OFF, High frequency, Lift-Tig Energy control: Selector switch, 4 levels: on the machine, Hand or foot control, Welding torch Operating mode: Selector switch, 4 levels: 2-stroke, 4-stroke, 4-stroke with 2 currents, Gas test, Test, Program Program memory: 20 memory locations, freely assignable AC frequency: 50-200 Hz AC balance: 9-91% Gas pre-flow time: 0-3 s Gas post-flow time: 0-25 s Current ramp-up time: 0-2 s Current ramp-down time: 0-20 s Ignition pulse: 0-100 ms Spot time: 0.1-2.5 s Pulse slow: 10 ms-2.5 s Pulse fast: 50 Hz-5 kHz Hot start time: 0-1.5 s Hot start current: 10-200% Current regulation: 100-250% Button: Test protective device Button: Program selection LED: Power ON, Over temperature, Fault, Protection circuit, Display hold, Start current Ramp-up, Current 1, Current 2, Ramp-down, End current Power source: IGBT inverter Ignition: High frequency or Lift-Tig Standard: EN 60974-1 "S" / CE Torch connection: EURO central connection with 5-pin plug Torch cooling: Water-cooled Socket 50 mm²: Workpiece cable Socket 50 mm²: Electrode welding cable Power connection: 4 x 4 mm², 5 m long Gas connection hose: 2 m Weight: 130 kg (300 AC/DC) Dimensions L x W x H: 910 x 600 x 910 mm with gas cylinder holder Gas cylinder holder: 10 - 20 - 50 l gas cylinder You can find more items - new and used - in our shop! International shipping costs on request!

Condition: good (used), Gas metal arc welding machine, arc welding system, MIG/MAG welding system, welding machine -Manufacturer: Messer Griesheim, MIG/MAG gas-shielded welding machine -Type: Euromag 25-2 -Max. welding power: 250 A -Wire feed: 4-roll drive, separate, mobile -Accessories: Hose assembly, ground cable (see photos) -Dimensions: 970/490/H890 mm -Weight: 168 kg Hodpfxez A R R Ts Akronu

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: 82397, type of input current: three-phase, welding current (max.): 420 A, Equipment: type plate available, MERKLE Insquare W 421 AC/DC water-cooled TIG welding system Hsdpfx Akozamfforsnu Manufacturer: MERKLE Model: Insquare W 421 AC/DC Year of manufacture: 2012 Serial number: 82397 Description For sale is a powerful AC/DC TIG welding system from MERKLE with water cooling. This system is suitable for professional welding applications on steel, stainless steel, aluminum, and other non-ferrous metals. The AC/DC technology allows for both DC and AC welding, covering a wide range of applications. With a welding current of up to 420 A, the system is ideal for industrial use in metal, tank, plant, and pipeline construction. The water cooling ensures continuous and reliable operation, even at high welding currents. Technical data Manufacturer: MERKLE Type: Insquare W 421 AC/DC Year of manufacture: 2012 Welding current range: 5 – 420 A AC frequency: 50 – 200 Hz Open-circuit voltage: 80 V Mains connection: 400 / 415 V, 50 / 60 Hz, 3~ Duty cycle at 40 °C: 420 A at 40 % 360 A at 60 % 310 A at 100 % Protection class: IP23 Water cooling Standard: EN 60974-1 Scope of delivery MERKLE Insquare W 421 AC/DC Water cooling TIG torch Ground cable Foot pedal All information is subject to change without notice.

Year of construction: 2005, condition: good (used), functionality: fully functional, machine/vehicle number: 8382, 2-head welding machine for PVC profiles Hjdpfx Aozdq Ttjkronu

Condition: good (used), Year of construction: 2004, EMA high-frequency welding machine with cooling water unit EMA high-frequency welding machine MFA with Thermotec PT2000 water cooling system Welding machine range: 0 - 1000 °C MF output: 80A MF generator frequency: 10 kHz Mains connection: 380V 106 A Foot pedal Water cooling, cooling water unit Thermotec PT2000 Hnsded Tv H Dopfx Akrju Dimensions approx. L1500 x W730 x H1900 mm Volume: 1730 liters Year of manufacture: 2004 The collection basin is not included in the scope of delivery. You can find more new and used items in our shop! International shipping costs available upon request!

Condition: used, Column resistance welding machine (spot welding machine) with a swing arm and mechanical drive, featuring a digital LCD multi-function control panel. Continuous and pulsed operation for welding steel, stainless steel, and galvanized sheets. Possible operating modes: EASY or EXPERT. Up to 20 individually configurable spot welding programs. Adjustment of spot welding current (%), spot welding time (cycles), pressure, and speed during electrode closing, as well as adjustment of the air flow to slow down the closing of the arms. Selection of various parameters of the spot welding cycle. The electrodes and arms must be cooled with liquid. Hjdpfxez D Aa As Akrjnu Column resistance welding machine (spot welding machine) with a swing arm and digital microprocessor control. The digital LCD multi-function control panel enables the following operating modes: EASY (adjustment of spot welding current and spot welding time); EXPERT (adjustment of various spot welding parameters) with the ability to store up to 20 individually created programs. Continuous and pulsed operation ensures the best welds for different types of steel. Features: Spot welding current control (%), spot welding time (cycles), electrode closing force; Selection of various parameters of the spot welding cycle (holding time, ramp time, welding time, pause time, and pulse number); Easy-to-read LCD display; Mechanical drive via foot pedal; Adjustment of the arm span; Thermal protection with indicator. The electrodes and arms of this model must be water-cooled. CODE 824051 TWO-PHASE MAINS VOLTAGE 400 V MAINS FREQUENCY 50 / 60 Hz MAXIMUM SPOT WELDING CURRENT 16400 A MAXIMUM OPEN-CIRCUIT VOLTAGE 4.2 V MAXIMUM POWER CONSUMPTION 60 kVA RATED POWER X=50% 25 POWER FACTOR 0.7 MAXIMUM WELDING THICKNESS FOR 2 SHEETS 5 + 5 mm MAXIMUM ELECTRODE FORCE 220 daN ELECTRODE PROTRUSION 330 mm DUTY CYCLE 5.5 % PROTECTION CLASS IP20 DIMENSIONS 79 x 32 x 128 cm WEIGHT 147 kg

Condition: used, Automatic rebar mesh welding machine MCC001 The machine is designed for welding steel reinforcement mesh from previously shortened reinforcements for rods that comply with the EN 10080 standard. Technical data: Diameter of reinforcing bars: 4mm, 5mm, 6mm Number of longitudinal bars: 2 – 12 Length of longitudinal bars: 200mm – 3000mm Minimum step between longitudinal bars: 100mm Pitch of crossbars: 10mm – 999mm Length of crossbars: 100mm – 1250mm Screen moving speed: 0.1m/s – 1m/s Compression force: 60kg – 190kg Productivity: 1 cycle/minute Electricity: Supply voltage: 400V Voltage frequency: 50Hz Connection type: TN-C Power: 100kVA Higher engine power: 0.8 kW Power of one welding transformer: 35 kVa Pneumatic indicators: Working medium: Compressed air Working pressure: 6 bar Air consumption: 250 l/min Cooling: Cooling type: water cooling Hnsdpfxeymcpyo Akreu Circulation type: forced circulation Maximum incoming heat carrier temperature: 35 °C Heat carrier consumption: 60 l/min Diameter of reinforcing bars: 4 mm, 5 mm, 6 mm Number of longitudinal bars: 2 – 12 Length of longitudinal bars: 200 mm – 3.000 mm Minimum step between longitudinal bars: 100 mm Pitch of crossbars: 10 mm – 999 mm Length of crossbars: 100 mm – 1250 mm Screen moving speed: 0.1 m/s – 1 m/s Compression force: 60 kg – 190 kg Productivity: 1 cycle/minute Supply voltage: 400 V Voltage frequency: 50 Hz Connection type: TN-C Power: 100 kVA Higher engine power: 0.8 kW Working medium: Compressed air Working pressure: 6 bar Air consumption: 250 l/min Cooling type: water cooling Circulation type: forced circulation Heat carrier consumption: 60 l/min

Condition: excellent (used), Year of construction: 2012, CLOOS GLC 403 Quinto welding machine. A total of nine Cloos 403 machines are available. Year of manufacture: from 2005 to 2012. Other models of the Cloos 503 welding machines are in stock Hjdpfx Aetkunuekronu

Condition: good (used), 1 MIG/MAG welding machine Manufacturer: Merkle Model: MobiMIG 320 K Technical specifications: Input voltage: 3 x 400 V Adjustment range: 25 - 320 amps Duty cycle: 40% at 300 amps, 60% at 270 amps, 100% at 240 amps Current adjustment: stepless Cooling: Inverter cooled by integrated fan; Torch: gas-cooled Hedjxpf N Topfx Akrjnu Design: portable assembly unit Wire feed mechanism: 4-roll drive DV 26 Fuse protection: 16 amps Dimensions: 600 x 300 x 565 mm

Condition: good (used), Bosch Diffusion Welding Machine The system described here was designed for the following application: Diffusion welding machine for manufacturing the connection between the armature lead and the commutator for starter armatures by means of diffusion welding. Diffusion welding machine (also known as polymer diffusion welding machine, diffusion welding, copper soft-soldering machine, copper band welding machine), consisting of a main machine and control system, "PLC control, touchscreen operation". Process description: The workpiece carrier enters the station and is lifted. The alignment gripper takes the armature from the workpiece carrier and aligns it to the welding position. The loading gripper takes over the armature and inserts it into the welding chuck. The welding chuck moves with the armature to the welding position. The contact and welding cylinder move together, and the first welding process takes place. This process is repeated until the armature is completely welded. The welding chuck moves with the armature to the transfer position, and the unloading gripper takes over the armature and places it on the lifted workpiece carrier. The workpiece carrier is lowered. Workpiece carriers with I0 armatures continue on the conveyor system; I0 armatures are conveyed to the removal conveyor. Technical data: Manufacturer: Gatek Designation: Diffusion Welding Machine Energy data: Frequency: 50 Hz Hedsg Icfpopfx Akronu Rated power: approx. 11 kW Operating voltage: 400 V / 3P Control voltage: 24 V Rated current: 20 A Fuse rating: 35 A Water: Inlet 4 bar, 15-23 °C, approx. 25 l/min Compressed air, oil-free: min. 5 bar Temperature: 1000 °C at the tungsten electrodes Machine dimensions without control cabinet Depth: 1800 mm Width: 3100 mm Height: 2700 mm Weight: 3000 kg Year of manufacture: 2016 You can find more items – new and used – in our shop! International shipping costs on request!

Condition: used, functionality: fully functional, Multi-function welding machine (MIG, TIG, electrodes) Hodpfoxf Hv Hsx Akrsnu Brand: Kemppi Model: Pro 3000 / Promig 500 Water-cooled unit with Kemppi PRO Cool 10 chiller. TIG/electrode welding unit Kemppi PRO TIG 410 - Kemppi TL control panel - Functions for TIG welding: pre-gas, post-gas, arc, high frequency TIG generator Kemppi Pro 3000 MIG/wire welding unit Kemppi PRO MIG 500 - Duty cycle: 500A - 60% - Kemppi ML SYNERGIC control panel - 4 feed rollers - Pulsed arc current with Synergic panel - Dedicated functions for welding steel, stainless steel and aluminum Includes: - TIG welding torch - MIG welding torch - Earth cable - Gas regulator

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 0720, Year of construction: 2015, overall weight: 370 kg, laser power: 200 W, travel distance Z-axis: 570 mm, laser source model: LS-PEC 200, A comprehensive service costing €5,000 was recently performed on the system by the manufacturer. The lamp, mirror, and cooling circuit pump were replaced. The system was initially used as an exhibit from 2015 to 2018. From 2020, the system was used at approximately 50% capacity, and from 2023, only one day per week! Ideal for toolmaking, repair, or die-casting part refurbishment! TECHNICAL DETAILS Laser type: Nd:YAG Laser source: LS-PEC 200 Average power max.: 200 W Pulse peak power: 9 kW Pulse energy: max. 100 J Pulse duration: 0.4–20 ms Pulse frequency: 1–20 Hz (100 Hz) Focus diameter: 0.2–2.0 mm Positioning speed: 0.5–15 mm/s X-axis travel: 700 mm Y-axis travel: 400 mm Z-axis travel: 570 mm MACHINE DETAILS Electrical connection data Mains voltage: 400 V Phases: 3 Mains frequency: 50 Hz Dimensions & weight Dimensions (L x W x H): 950 x 1,550 x 1,250 mm Weight: 370 kg Total pulses: 56,527,413 EQUIPMENT Joystick control LED lighting Swivel device for the resonator to weld large molds Hnedpfozlqt Njx Akrju Protective gas supply directly controlled via a solenoid valve Heavy-duty castors Laser resonator including resonator mechanics Laser rod Resonator cavity Resonator mirror Safety shutter Power supply including mains fuse Mains switch Emergency stop switch Motor protection switch Interface with hardware monitoring function Lamp switch Industrial controller Capacitor bank

Condition: new, Year of construction: 2022, Base sheet fiber laser metal cutting machine with full protection Maximum cutting area reaches up to 12000mm*2500mm, suitable for a variety of cutting options. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The cutting process works even at the edge of thin sheets, and ensures no chatter marks. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Hsdpfx Ajhwhfqokrsnu Laser Power: 1000W - 40000W Cutting Area: 3048*1524mm - 12500*2600mm Cutting Speed: 0-110m/min Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: excellent (used), Year of construction: 2003, Cloos GLC 451 C welding machine. Year of construction: 2003 Hnedpfetkurijx Akrou With welding package

Condition: as good as new (ex-display), MIG/MAG welding machine with inverter technology. Three-phase power supply, welding machine. Master Software TERRA PME included. Technical data Power Supply: Voltage (50/60 Hz): 3x400V ±15% Maximum input power: 22.9 kVA Maximum input current: 31.1 A Power factor PF: 0.73 Efficiency: 89% Hnsdpfxew Rm Sao Akreu Slow-blow fuse: 25 A Open-circuit voltage: 61Vdc IP protection class: IP23S Insulation class: H Power cable: 4x3mm² – 5 m Welding: Setting range: 3–400A Duty cycle MIG/MAG at 40°C: 40% – 400A, 100% – 330A Duty cycle MIG/MAG at 25°C: 100% – 400A Wire diameter: 1.0–1.2 mm (optional 0.6–1.6 mm) Flux-cored wire diameter: 0.9–2.4 mm Aluminum wire diameter: 0.8–1.6 mm Wire feed speed: 0.5–22.0 m/min Wire spool diameter: Ø 200/300 mm Remote control connection: yes

Condition: good (used), Gas metal arc welding machine, arc welding system, MIG/MAG welding system, pulse welding system -Manufacturer: Ess, MIG/MAG welding machine -Type: Pulsarc 350 -Max. welding power: 350 A -Water-cooled -Wire feeder case: ESS DVK 400 4-roller drive -Dimensions: 970/670/H1040 mm Hjdex Hi I Dopfx Akrsnu -Weight: 209 kg

Condition: new, Year of construction: 2026, CORMAK WL3000 laser welding machine is a professional 3-in-1 device with a power output of 3000 W, designed for laser welding, cleaning, and cutting. It has been developed for industrial plants and workshops requiring reliability, precision, and high operating efficiency. Thanks to fiber laser technology, the machine provides exceptional beam stability and enables processing of a wide range of metal materials while maintaining a minimal heat-affected zone. Main advantages of the machine Maximum power of 3000 W – increased penetration depth and higher welding speed. Water cooling system – ensures stable operating conditions during continuous operation. Ergonomic welding head – lightweight and flexible, with adjustable spot size from 0–5 mm and interchangeable nozzles. Automatic dual wire feeder – integrated with the control system. Welding speed up to 215 mm/s – up to 10 times faster than traditional methods. Ability to process thin materials – for example stainless steel with a thickness of 0.5 mm. Operating modes: continuous / modulated – full control over weld parameters. Welding with or without wire – versatile technological solution. Cleaning and cutting functions – expanded range of applications. Design and technology The machine is based on a fiber laser source with a wavelength of 1070 nm and a 10 m fiber optic cable. Thanks to its compact housing and integrated connections for shielding gases and cooling systems, the CORMAK WL3000 ensures safe and efficient operation. The high-power welding head enables welding at various angles, while the optical system guarantees excellent beam quality and stability. Precision and work efficiency The CORMAK WL3000 laser welder enables fast and repeatable welds without the need for additional finishing operations. Due to the small heat-affected zone, the material structure remains unchanged. Low levels of reflected radiation improve operator safety while maintaining excellent final weld quality. Applications Industrial and manufacturing plants Metalworking, automotive, and HVAC industries Laser welding, cutting, and cleaning of metals: mild steel, stainless steel, aluminum, brass Production of lightweight structures, railings, housings, and precision components Standard equipment Laser welding machine with water cooling system Hnodpfx Akekkbw Ujrju Welding head with focal length adjustment MaxPhotonics laser source Automatic dual wire feeder Connection cables Starter set of nozzles and protective lenses Optional equipment Optical kit for laser cleaning – PLN 1500 net Technical specifications Parameter Value Maximum laser power 3000 W Laser wavelength 1070 nm Fiber optic cable length 10 m Operating modes Continuous / Modulated Shielding gas flow rate 10–15 L/min Welding speed 0–215 mm/s Automatic wire feeder Ø 0.8–2.0 mm Maximum power consumption ≤11.0 kW Focal length 150 mm Cooling system Water cooling Operating voltage 400 V Shielding gas consumption Approx. 10–12 L/min per wire diameter Dimensions 600 × 1100 × 1100 mm Approximate weight 207 kg

Condition: excellent (used), functionality: fully functional, Description WE OFFER AN NICE CONDIUTION NIMAK WELDING GUN 22 Kwa power with balanser and top traverse rails. READY TO WORK. EASY TO OPERATE. Machine is still in production working Hnjdpovk Ul Refx Akreu Complete with balanser and traverse. Specifications Manufacturer NIMAK Model ZT 22/1 Condition Used Power 22 kwa Kuhl w. Q 4 L/MIN

Year of construction: 2023, condition: used, We offer this used Weber Ultrasonics Saphir Digital Manual Station ultrasonic welding machine, year of manufacture 2023. Approximately 92,500 units have been produced with this machine. Sonotrode TR35Ti Frequency: 35 kHz Power: 1000 W 230V AC Stroke measurement system: 26.88 mm Minimum force: 34 N Maximum force: 500 N Low Level: 0 N Low Offset: 0 N Hnodpfx Akeyimqwjrju If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, WIG and electrode inverter welding unit ESS Type 170 ATG (AC-DC) TIG welding machine Serial No. Year of manufacture: 2007 TIG output 170 amps = 35% duty cycle Hnedportvi Uefx Akrou 130 amps = 60% duty cycle 110 amps = 100% duty cycle Electrode output 140 amps = 35% duty cycle Mains supply 230 Volt, 50 Hz - DC and AC welding - HF ignition - stepless power adjustment - 2-stroke and 4-stroke operation - pulse welding mode - stick electrode operation - 8 meter hose package with TIG torch - shielding gas pressure regulator - fan cooling - portable Equipment dimensions (L x W x H) 400 x 270 x 500 mm Weight 26 kg The welding test shows very good results when welding stainless steel with DC current and very good results when welding aluminium with AC current. Overall in very good condition.

Condition: used, WIG and Electric Inverter Welding Machine ESS Type Transtig 231 (DC) WIG Welding Machine Serial No. Year of manufacture: 2007 WIG output: 225 A = 40% duty cycle 180 A = 60% duty cycle 140 A = 100% duty cycle Electrode output: 180 A = 50% duty cycle Power supply: 400 Volt, 50 Hz, 16 Amp plug - DC welding unit - stepless power adjustment - 2-stroke and 4-stroke operation - HF ignition Hnsdertvi Repfx Akrju - pulse welding mode - stick electrode mode - water-cooled - 8 meter WIG hose assembly with hand torch - shielding gas regulator - operating manual Space requirement (L x W x H): 1000 x 450 x 710 mm Weight: 90 kg The welding test produced very good results when welding stainless steel with DC. Otherwise in very good overall condition.

Condition: good (used), Year of construction: 2014, Tecna 3484 Universal Spot Welding System, 8 kVA Universal welding station, 8 kVA, manually operated welding gun, dual program. Simultaneous connection of two tools with automatic selection of the corresponding welding program, which saves time and avoids errors, ensuring a simple and safe workflow. Body repairs: Resistance spot welding of sheet metal, smoothing with a dent puller (pins and washers), localized heating (carbon electrode), screw and rivet welding, dent removal from stainless steel sheet metal. Synchronous SCR welding control, adjustment of welding time in cycles and pulses, adjustment of welding current and compensation function. Mains connection: 400V Mains frequency: 50 / 60 Hz Hsdpfx Ael Smn Sskrenu Fuse: 25 A Rated power at 50% duty cycle: 8 kVA Max. welding power: 35 kVA Max. secondary current: 6.4 kA Heat current 100%: 0.88 kA Year of manufacture: 2014 Weight: 85 kg More items – new and used – can be found in our shop! International shipping costs available upon request!