Used Cmb Ebc-150/70 for sale (22,580)

Condition: used, Cast iron bed Length: 3650 mm Width: 1370 mm Thickness: 150 mm 11 T-slots - dimensions 32 x 18 mm Iiedpfxjz I A Tkj Ag Ash Slots spacing: 125 mm Assembly in 2 parts Dimensions of each part: L 1820 mm x W 1370 mm x H 150 mm Total height on base 875 mm Weight: approx 4 T

Condition: as good as new (ex-display), Year of construction: 2025, pressure 150 t stroke 300 mm table surface area 1070 x 290 mm column travel between the guideways 1070 mm ajustment speed 9.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec engine output 11.0 kW weight of the machine ca. 1870 kg. range L-W-H 2200 x 1300 x 2300 mm Exhibition machine from 2025 with only approximately 2 operating hours Condition as new Special price upon request Features: - Robust electro-hydraulic workshop press with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in . and out bolts, bearings, bushings, and much more. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod * Includes round steel chain and 2 locking pins * Piston rod with metric mount Ijdpfjxaabfox Ag Aeih - 1 set of V-block prism supports - Pressure gauge for pressure display - Simple manual control with: * 1 feed speed * 1 working speed * 1 retraction speed - Piston can be stopped in any position - Hydraulic tank permanently mounted on the side - Operating instructions

Condition: ready for operation (used), Primary voltage: 3 x 400 V Primary current: 10.1 A Secondary voltage: 3 x 113 V Secondary current: 36 A Secondary voltage: 220 V Secondary current: 0.91 A Duty cycle: 100% Primary power: 7000 VA Frequency: 50/60 Hz Space requirement: 330 x 160 x 190 mm Weight: 51 kg Iiedpfx Aged Atrds Aeh

Year of construction: 1998, condition: ready for operation (used), Clamping force: 1500kN, screw diameter: 50mm, tie bar spacing: 500mm, platen dimensions X/Y: 780mm/790mm, opening stroke: 600mm, daylight: 900mm, ejector stroke: 150mm, shot volume: 305cm³, injection weight: 278g, injection pressure: 2336bar. Machine dimensions X/Y/Z: approx. 4700mm/1550mm/2200mm, weight: approx. 7000kg, control: MC4. Includes Sepro handling system. Documentation available. An on-site inspection is possible. Iedpfxjw Hthze Ag Ajih

Condition: excellent (used), Temperature controller, temperature sensor, temperature setting, temperature converter, temperature limiter, electronic temperature controller, temperature switch, thermostat -Manufacturer: Danfoss, thermostat temperature switch, unused, original packaging Iodpfelc Uh Esx Ag Aoih -Type: RT 107 17-1566 -Temperature range: 70 to 150 °C -Quantity: 4 thermostats available -Price: per piece -Package dimensions: 280/130/H75 mm -Weight: 1.2 kg/pc.

Condition: used, all stainless steel nett width 450 mm motor Type MS 6-25 HZ power: 0,7 kW Iodpfx Aozzaydog Asih Grill opening: dia. 10 mm dimensions : ± 2.900 x 750 x 600 mm 380-440V, 50 Hz GN 205,5 kg

Condition: good (used), Plug-in shaft for friction wheel, impeller, bridge crane, hall crane, assembly crane, flange hub, gear plug-in shaft, coupling, power coupling, gear coupling, gear coupling -Manufacturer: Konecranes, stub shaft Gearbox stub shaft: for crane chassis Ijdpfxov Hmnco Ag Ajih -Type: unfortunately without type designation, suitable for gearbox ID 34705 / ID 34752 -Shaft: Ø 70 x 150 mm -Bolt circle: Ø 422 x 25 mm -Dimensions: see photos -Quantity: 2 pieces available -Price: per piece -Dimensions: Ø 480 x 280 mm -Weight: 83 kg/piece

Year of construction: 1999, condition: excellent (used), INJECTION MOLDING MACHINE KRAUSS-MAFFAI 150-700 C1 Iijdpfx Ageh S Dncj Ash Year of manufacture: 1999 Screw diameter: 55 mm In excellent condition, still in operation.

Condition: refurbished (used), Pressure: 150t Iedpfx Asgd H Tpeg Asih Length of Stroke: 140mm Table size: 510x530mm

Condition: good (used), Year of construction: 2002, I - beam section - flat steel 120 x 20 (d 750) mm I-beam section - upend 60 x 10 (d800) mm L-beam 50 x 5 (d 1200) mm bar material - diameter 35.0 (d 800) mm bar material dia. max. 70 x 3.0 (1200) mm 50.0 mm diameter of upper rolls 155 mm diameter of lower rolls 155 mm Stroke length 150 mm Rotating speeds 9.0 U/min total power requirement 1.3 kW weight 305 kg range L-W-H 900 x 700 x 1500 mm Features: Iodpfx Asz S U T Sog Asih - Robust electric-motor-driven ring/profile bending machine - Machine base frame with rear storage shelf - Can be used in both horizontal and vertical orientations - Equipped with a wide variety of roller sets * Split roller segments * Pipe rollers - Electro-hydraulic feed of the upper roller - Manually adjustable side/alignment rollers - 1 freely movable control panel - Base frame with forklift pockets * For easy transport

Condition: new, Ostas 3-Roll Round Bending Machine SMR-S 1070 x 150 Technical specifications: Special equipment included in the price: hardened rollers Isdsiw D Ecjpfx Ag Ajih motorized rear roller adjustment digital display sheet metal width 1070 mm sheet metal thickness 8.0 mm max. sheet metal thickness 7.0 mm for pre-bending roller length 1070 mm smallest diameter 225 mm roller diameter 150 mm weight 1400 kg dimensions L-W-H 2600 x 630 x 1020 mm motor 4.5 KW Equipment: top and bottom rollers electrically driven top roller can be pivoted out conical bending device asymmetrical roller arrangement self-braking main motor separate control and operating panel safety cable, CE marking Values apply to St-37 / 240 N/mm²

Condition: excellent (used), Year of construction: 2011, operating hours: 55,806 h, functionality: fully functional, clamping force: 1,500 kN, screw diameter: 45 mm, total length: 4,700 mm, total width: 1,700 mm, total height: 2,000 mm, overall weight: 4,850 kg, For sale is an Arburg injection moulding machine, model 470 C 1500-400. The offer includes Arburg handling, type Multi Select Axis X/Y/Z 600/600/1400 mm. Isdpjw E Itiofx Ag Asih The machine is in excellent condition and ready for immediate use. Technical data: Year of manufacture: 2011 Clamping force: 1,500 kN Tie bar spacing: 470 x 470 mm Mounting plate: 650 x 650 mm Operating hours: 55,806 h (pump) Injection unit: Ø 45 / SP 400 Shot volume: approx. 254 cm³ Shot weight: approx. 232 g Injection pressure: up to 1,580 bar Dimensions: approx. 4,700 x 1,700 x 2,000 mm Weight: 4,850 kg Transport and loading can be organized Europe-wide upon request (at extra cost). All prices plus VAT. Inspection possible by appointment. Please contact us – our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Condition: reconditioned (used), functionality: fully functional, saw blade length: 300 mm, cutting range round steel at 45°: 150 mm, cutting height (max.): 150 mm, The fully hydraulic high-speed production hacksaw has universal hydraulics for the exclusive or alternating cutting of thin and thick-walled profiles as well as solid material without changing the saw blade with the uniform tooth pitch of 3 or 4 teeth per inch. Pre-tensioned bow guide, closed oil hydraulics, triple swivel bearing, separate coolant system, infinitely variable hydraulic cutting pressure, lift-off movement and accelerated return stroke, equipped with infinitely variable mitre device as standard. mitre device as standard. Lifting of the saw arm in rapid traverse. Pendulum vice for perfect utilization of the saw blade. Longitudinal guide with ground and and hardened guide rails to transfer the cutting pressure forces to the saw frame. Automatic limit stop. Push-button operation for on, off and up functions of the saw arm Manufacturer KASTO Metal hacksaw Machine type WBS 150/170 U Drive power: 0,75 KW Stroke rates: 85/170 min Cutting speed: 16/32 m/min Universal hydraulics: standard Saw feed hydraulics Cutting range round: 150 mm Cutting range flat: 150/170 mm Mitre 0-45 ° Material support height: 700 mm Weight: 170 kg. Iedpfx Agsrrvgxs Aeih Length/width: 770x700 mm Height: 1370 mm Saw blade dimensions: 300x30x1.5 mm Machine for notching Accessories. coolant device

Condition: used, Year of construction: 2020, operating hours: 8,555 h, functionality: fully functional, clamping force: 1,500 kN, heating capacity: 19 kW (25.83 HP), pump power: 71 W, power: 53.5 kW (72.74 HP), input frequency: 50 Hz, input voltage: 400 V, input current: 90 A, We are offering this used ARBURG 470 C 1500-400 injection molding machine, manufactured in 2020, from ongoing production. Includes INTEGRALPICKER. Type: 470 C 1500-400 Machine No.: 254634 Year of Manufacture: 05/2020 Operating Voltage: 400 V, 50 Hz Control Voltage: 24 V Rated Current Motor/Heater: 71 / 19 A Total Current: 90 A Total Connected Load: 53.5 kW Pump Operating Hours: 8555 40 mm plasticizing cylinder set (without nozzle) Open nozzle 40 mm with internal thread for screw-in nozzle tips Internal thread up to injection unit 290: M 24 x 1.5 Internal thread from injection unit 400: M 36 x 2 Price: €48,000.00 Available from the end of December 2026. If you have any questions or require further information, please send us a message or call us. Iiedpfszhar Hsx Ag Aeh

Condition: new, Ostas 4-Roller Plate Bending Machine 4R OHS 1570 x 150 Hydraulic side roller adjustment 3 digital displays Hydraulic drop-end Hardened rollers Device for conical bending Separate control panel Ijdpfoxrc Dtsx Ag Aoih Roll length: 1570 mm Top roller diameter: 150 mm Side roller diameter: 130 mm Total motor power: 4+3 kW Weight: 2,470 kg Dimensions (mm): 3350 x 1200 x 1210 (L x W x H) Bending performance data 6 mm at minimum internal diameter (5 x top roller) 4 mm at minimum internal diameter (1.5 x top roller) Pre-bending performance data 4 mm at minimum internal diameter (5 x top roller) 3 mm at minimum internal diameter (1.5 x top roller) All bending capacities are calculated on the basis of 250 N/mm² yield strength Material (ST 37 - ST 42 structural steel)

Condition: new, Hydraulic workshop press LFSS, type DPM 1070/150 Technical specifications: Pressure: 150 t Stroke: 300 mm Table area: 1070 x 290 mm Distance between column guides: 1070 mm Approach speed: 8.0 mm/sec Working speed: 5.0 mm/sec Retraction speed: 10.0 mm/sec Motor power: 11 kW Machine weight: approx. 1900 kg Space required: approx. 2110 x 1000 x 2340 mm Iisdpfx Agogiphno Ajh Equipment: Hydraulic workshop press Table height adjustment V-block tool insert Pressure gauge

Condition: excellent (used), Attachment: Used chamber filter press Design: Top-driven Filter plate format: 1500x1500 mm Filter plates: 70 pieces / final expansion to 100 pieces Filter plates: PP Filter cloths: available as an option, matched to the medium Throughput: 20-25 m³ per batch Filter area: 242 m² Press volume: approx. 50 dm³ Filter pressure: 15 bar Closing pressure: 400 bar Plate transport: automatic Motor voltage: 380 V Iijdpfx Aeg S I Smjg Aeh Control voltage: 230 V - 24 V Filling pump: available as an option

Condition: excellent (used), Year of construction: 2003, clamping force: 1,500 kN, screw diameter: 45 mm, injection pressure: 1,670 bar, injection weight: 210 g, Arburg 470C-1500-350(166) General information Product Code: 166 Availability: In Stock Year of production: 2003 Brand: Arburg Technical data Shot Weight: 210 g Clamping Force: 1,500 kN Screw dia: 45 mm Injection pressure: 1670 bar Tie bar distance: 470x470 mm Platen size: 650x650 mm Mould height min.: 250 mm Type of controls: Selogica Language: German Isdpfxjvt S Ego Ag Aeih Power: 40,2 kW Workinghours: 83824 h Weight: 4410 kg Dimensions: 4,5 x 1,8 m Hopper: No Core pull: Yes Euromap: Yes Air valve: Yes

Condition: excellent (used), Year of construction: 2017, operating hours: 17,809 h, clamping force: 1,500 kN, screw diameter: 40 mm, clearance between the columns: 470 mm, displacement volume: 201 cm³, injection pressure: 2,000 bar, injection weight: 184 g, mold height (min.): 250 mm, plate length: 650 mm, plate height: 650 mm, total length: 4,500 mm, total width: 1,700 mm, overall weight: 4,850 kg, Arburg 470C-1500-400 injection molding machine with Multilift robot, safety cage, 2 conveyor belts and sorting flap (262) SERVO MOTOR PUMP DRIVE = LOWER ENERGY CONSUMPTION AND MORE ECONOMICAL OPERATION Category: INJECTION MACHINES Brand: Arburg Number: 262 Availability: in stock Year of production: Iijdjz Hm N Hjpfx Ag Ash 2017 Producer: Arburg Injection molding machine condition: used Screw diameter [mm]: 40 Injection weight [g]: 184 Injection pressure [bar]: 2000 Closing force [kN]: 1500 Column spacing [mm]: 470 x 470 Plate size [mm]: 650 x 650 Min. mold height [mm]: 250 Control type: Selogica Tongue: English, German Installed power [kW]: 38 kW (pump drive on 18.5kW servo motor) Working hours [h]: 17809 Weight [kg]: 4850 Dimensions [mm]: 4500×1700 Feed hopper: Yes Core string: 2x Robot socket: euros 67 Air valve: 1x Control of heating for molds: 6x

Condition: excellent (used), For sale: a professional, two-spindle eyeletting/riveting machine, Constantin Hang Typ 150 3P, manufactured in Germany in 1983. This machine is designed for the simultaneous installation of two eyelets or rivets, significantly increasing work efficiency. The machine is used in bookbinding facilities, printing companies, and factories producing binders, folders, calendars, tags, and other paper products. It is equipped with two working units, an adjustable table, and precise guides that allow for accurate material positioning. Technical specifications: Manufacturer: Constantin Hang Maschinenfabrik Model: Typ 150 3P Iodpfx Aoz Sm Ureg Asih Year of manufacture: 1983 Serial number: 35805 Country of manufacture: Germany Type: two-spindle eyeletting/riveting machine Two working heads Adjustable work table Guides and material position adjustment Robust industrial construction Electric drive Condition: used Applications: eyelet installation, riveting, binder production, folder production, calendars, promotional tags, cardboard packaging, bookbinding and printing. The machine is sold in the condition shown in the photos.

Condition: used, System: Used Chamber Filter Press Type: Passavant Area of application: Sludge dewatering Design: Bridge beam Filter plate format: 1500x1500 Number of plates: approx. 70 Iisdpfov Nqd Tjx Ag Aoh Filter plates: PP Filter cake capacity: approx. 3330 dm3 Filter cloths: optionally available depending on the medium Filter pressure: approx. 15 bar Pump technology: optional Purchase or rental: Inspection of the systems by appointment at our factory. 2 identical units available

Condition: new, Hydraulic workshop press, LFSS, type DPM-K 1570/150 Hydraulic workshop press with adjustable cylinder Technical specifications: Pressure: 150 t Stroke: 300 mm Iiodogx Uvaspfx Ag Aeh Table area: 1570 x 260 mm Distance between the guides: 1570 mm Approach speed: 9.0 mm/sec Working speed: 5.0 mm/sec Retraction speed: 10.0 mm/sec Motor power: 11 kW Machine weight: approx. 2100 kg Space requirement: approx. 2630 x 1000 x 2480 mm Equipment: Hydraulic workshop press with adjustable cylinder Table height adjustment V-block tool insert Pressure gauge

Condition: excellent (used), Year of construction: 2005, operating hours: 36,012 h, clamping force: 1,500 kN, screw diameter: 45 mm, clearance between the columns: 470 mm, displacement volume: 318 cm³, injection pressure: 2,470 bar, injection weight: 291 g, mold height (min.): 250 mm, Arburg 470C-1500-800 injection molding machine with conveyor belt and picker (257) Year of production: 2005 Producer: Arburg Injection molding machine condition: used Screw diameter [mm]: 45 Injection weight [g]: 291 Injection pressure [bar]: 2470 Closing force [kN]: 1500 Column spacing [mm]: 470 x 470 Plate size [mm]: 650 x 650 Min. mold height [mm]: 250 Control type: Selogica Language: german Installed power [kW]: 44.9 Working hours [h]: 36012 Ijdpfozfhx Ajx Ag Ajih Weight [kg]: 4860 Dimensions [mm]: 4400 x 1600 Core string: 1x Robot socket: euro12 Feed hopper: NO

Condition: like new (used), Staff Ice System BTX150 Ice Cube Machine / Ice Maker 150 kg/24h Year 2022 Technical Specifications Gelato BTX150 A Staff Ice System ice machine for the production and storage of ice cream. Designed for manufacturing and storing ice cream. Automatic extraction. Stirrer with durable polyethylene blades. The double lid allows ingredients to be added during the process. Vertical tank for complete control of the production process. 50 customizable operating programs. Technical features: Maximum ice cream production per cycle: 2 liters. Ice cream production: 15 l/h. Dimensions: 43.5 x 59.2 x 59.5 cm. Isdpfx Agjyzc Rus Asih

Condition: new, empty load weight: 610 kg, Year of construction: 2026, operating hours: 1 h, Vlemmix machine transporter – NEW, available from stock! Iodjz N Tzvepfx Ag Ajih The 2700 kg machine transporter – 300x150 is ideal for transporting your excavators and other vehicles. The 2700 kg – 300x150 machine transporter is the smallest in its class, but certainly not the least! With a load capacity of 2090 kg, you can easily transport all your vehicles from A to B. Total weight: 2700 kg Load capacity: 2090 kg Tare weight: 610 kg Dimensions of loading platform: 300 x 150 cm 2 axles, 1350 kg each Dutch registration: €115 (excluding VAT) extra COC papers for Belgium: €55 (excluding VAT) extra €3500 (excluding VAT) Trade-in and delivery possible! If you are interested in our machine transporter but require some additional features, that’s no problem! All machine transporters can be customized with the following options: Aluminum diamond plate 300x150; Covered lock + discus lock; SCM-approved lock; Shock absorbers; Toolbox 60x27x35 cm; Wheel + tire 195/50R13 900 kg; Floor support ring installed; Winch 1200 kg; Winch support. SCM-approved lock LED lighting Reinforced nose wheel Two sliding ramps, similar to the standard tailgate Extended tailgate Aluminum diamond plate floor Toolbox (plastic - aluminum) Winch support / winch Spare wheel support / spare wheel Excavator bucket support / excavator bucket platform / excavator bucket platform with storage box. Bosmans Machines B.V. Dries 27 6086 AV Neer, Netherlands Our motto: No nonsense, fast delivery!