Used Cmb Ebc-150/70 for sale (21,827)

Condition: used, Year of construction: 2017, Automatic cold press Manufacturer: CMB Type: PFR-CCL Year of manufacture: 2017 Technical data: Motorized loading table 3,500 x 1,600 mm for manual assembly of the plates and automatic loading into the press on the 1,600 mm side. Structure made of welded steel profiles. Devices for adjusting the working height to compensate for unevenness in the floor. Steel rollers. Foot switch. PRESS Plate size: 5,500 x 1,600 mm Loading side: 1,700 mm Stroke: from top to bottom Opening: 450 mm Cold press The plates are made of steel sheet and attached to a steel frame structure. Maximum pressing force: 160 tons. Gbsdpfx Afozuzw Deuou Specific pressure (on 100% of the area): 1.82 kg/cm2 Specific pressure (on 80% of the area): 2.27 kg/cm2 Pressure cylinder: 12 x 80 mm Auxiliary cylinders: 6 x 50/30 mm Power supply: 400 Volt EU/50 Hz/3 PH. + G AUTOMATIC LOADING and UNLOADING of the plates on the lower plate, on the 3,500 mm side. The transport is carried out via a motorized MYLAR belt. The belt is activated by 2 rollers, one of which is located at the entrance and one at the exit of the press. The rollers are driven by a motor with a chain that slides on special guides. The Mylar belt rotates around the lower plate, which rests on special side supports. The belt rotates on 2 rollers, which are located at the entrance and exit of the press. The ends of the MYLAR belt are attached to special rods with devices for tensioning the MYLAR. The upper plate is covered with a Mylar film. The press plates consist of thick steel sheets that are welded to the frame structure. HYDRAULIC UNIT with pump, oil tank and valves for operating the pressure cylinders and auxiliary cylinders that move the upper plate. The hydraulic control unit is located in the upper part of the press to facilitate maintenance. CONTROL PANEL with buttons and switches. Pressure control manometer on the front of the press. UNLOADING MOTORIZED ROLLER TABLE 2,000 x 1,600 mm The unloading table is located at the exit of the press for manual unloading of the pressed plates. Exit side from the press: 1,600 mm. Note: The loading table of the press with the dimensions 3,500 x 1,600 and the unloading table with the dimensions 2,000 x 1,600 are shorter than the press table with the dimensions 5,500 x 1,600, as the press was installed in a line. Note: The technical data and descriptions are a transcript of the order confirmation at the time. The data is for informational purposes only and is not binding.

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, operating hours: 2,400 h, load capacity: 2,500 kg, lifting height: 2,970 mm, free lift: 150 mm, fuel type: gas, mast type: duplex, construction height: 2,170 mm, gearing type: other, tire condition: 60 %, overall weight: 4,200 kg, Equipment: 4th hydraulic function, cabin, clamp, lighting, STILL RX 70-25T in very good condition with low operating hours. Equipment: Load capacity: 2,500 kg Standard lifting mast Lifting height: 2970 mm Godpfsz Rlv Iox Afusbu Free lift: 150 mm Overall height: 2170 mm Full cabin with heating Single-pedal control Additional hydraulics for 2 functions / 4 valves Kaup clamp fork 1.5T411 with an opening range of 550 mm - 1700 mm 3 LED work lights Superelastic tires The muffler was replaced in 2025. A test drive or inspection can be arranged at any time. Transport can be organized for an additional charge.

Condition: excellent (used), PERFECT PFG-70150AHRD Surface Grinding Machine Gsdpfxszuxt Ao Afuobu Year 2014 Table size 700 x 1500 mm Maximum longitudinal travel 1650 mm Maximum cross travel 760 mm Maximum distance table surface to spindle centre 600 mm Table speed 5 – 25 m/min Magnetic chuck size 700 x 1500 mm Spindle speed 1450 rpm Spindle motor 7.5 kW (10 HP) Grinding wheel size 355 x 40 x 127 mm Floor space required 4810 x 2550 mm Weight 7800 kg Supplied with: Automatic Downfeed System, 1500 x 700 mm Electromagnetic Chuck, Demagnetising Unit, 2 Axis Digital Readout, Remote Handwheel, Spindle Motor Speed Inverter Control, Automatic Paper Strip Filter & Magnetic Separator, Machine Pads & Levelling Bolts, Low Voltage Work Light. For sale with Jet Machinery Ltd Jet Machinery Stock No: #27039 Machine Serial Number: 1485022 Cost: £49,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: new, - Capacity 1070 x 8 mm - Electrically adjustable rear roller - Electrically adjustable bottom roller (material clamping) - Digital display for rear roller movement - Hardened rollers - Conical rollers - Central lubrication system Godpfxjgg N R Ae Afuebu - Emergency stop - Documentation: Digital display for lower roller movement (material clamping) - Hardened rollers - Conical rollers - Rotatable upper roller - Central lubrication system - Brake motor - Emergency stop - Documentation - 400V

Year of construction: 1990, condition: used, ENGEL - ES 700/150 150 ton, 392 cm³, Strok: 420 mm Gbjdpfx Aozxrd Aofuou

Condition: excellent (used), CATALOGUE NUMBER 7176 TECHNICAL SPECIFICATIONS - Hopper inlet 1050x600mm - Outlet for shredded wood, diameter 160mm - Rotor working width 590mm - Main motor 18.5kW - Pump motor 0.75kW - Number of knives: 14 pcs - Knife dimensions: 30x30mm - Screen: 10x12mm - Clamping drawer - Electric auto-reverse - Dimensions (L/W/H): 1900x1200x1530mm - Weight: 990kg Gbodpfjzxg Snex Afuou ADVANTAGES - Auto-reverse - German-made - Unpainted - Similar to WEIMA WL4 - Clamping drawer - Very good condition - Used wood chipper Net price: 48900 PLN Net price: 11372 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (price may change in the event of significant exchange rate fluctuations)

Condition: used, Fan head, chamber ventilator, dorade ventilator, mushroom ventilator, ship ventilator, deck ventilator, ventilation, mushroom hood for ventilation, ventilation duct, ventilation flap, ventilation system, extraction system, ventilation ducts and fittings, multi-leaf damper, non-return damper, lamellar ventilator, mushroom hood -Manufacturer: WMW, fan head type MTK DN 150 GL 37081-86 HH -Bolt circle Ø 238 x 22 mm -Number: 1x hood available Godpfx Aeirf Hdsfuebu -Price per piece -Total dimensions: 310/200/H290 mm -Weight: 35 kg/pc.

Condition: new, empty load weight: 700 kg, Year of construction: 2026, Vlemmix Machine Transporter 2700 kg – 400 × 150, NEW, available from stock! The 2700 kg - 400x150 machine transporter is ideal for transporting your excavators and other vehicles. The 2700 kg - 400x150 machine transporter is the narrow version of the 400x180. If this width is sufficient for your needs, it offers a significant saving on the purchase price and storage space. With a payload of 2000 kg, you can easily transport all your vehicles from point A to point B. Vlemmix is manufactured in Asten, Netherlands! Total weight: 2700 kg Payload: 2000 kg Unladen weight: 700 kg Loading platform dimensions: 400 x 150 cm 2 axles, 1350 kg each Dutch registration: €115, excluding VAT Additional cost for COC documents for Belgium: €55 Price: €4000, excluding VAT If you are interested in our 2 x 1350 kg – 400x150 machine transporter, but require some extra features, that is not a problem! All machine transporters can be equipped with the following additional options: Aluminium diamond plate 400x180; Heavy-duty axles; Cover lock + disc lock; SCM-approved lock; Shock absorbers; Toolbox 60x27x35 cm; Wheel + tire 195/50R13 900 kg; Floor support ring, mounted; Winch 1200 kg; Gbsdpfoz N Twqex Afusu Winch support. SCM-approved lock LED lighting Reinforced drawbar Two sliding ramps, similar to standard ramp extension Extended ramp Aluminium diamond plate floor Toolbox (plastic - aluminium) Winch support / winch Spare wheel support / spare wheel Excavator bucket support / excavator bucket platform / excavator bucket platform with storage box Bosmans Machines B.V. Dries 27 6086 AV Neer, Netherlands Our motto: No nonsense, fast delivery!

Condition: good (used), Year of construction: 1973, FELLOWS 70-15 GEAR SHAPER - Model 70-15 Fellows heavy duty vertical gear shaping machine , suitable for the manufacture of external straight spur gears up to 70" pitch diameter, as well as internal spur gears and splines within a range of 0" to 88" pitch diameter, regardless of shaper-cutter radius. This unique feature, combined with the machines 15" face-width capacity and 1.7DP cutting capability in steel, provide a formidable platform for producing a wide range of larger geared part members. Equipped with: * Machine Main Base With Work-table, Upper Column, Cutter Ram and Slide of "Super Robust" Construction * Machine with "Saddle Backoff" Method of Cutter Relieving * Cutter Spindle 6.25" diameter w/Standard Straight Spur Guide * Cutter Positioning via Stroke Jog-Button * Rapid Rotation of Work Spindle for Trueing Work-Piece * Rapid Saddle Traverse for Traversing Saddle Relative to Work * Automatic Depth Feed Mechanism for One to Four Cuts, With 4 Speed Motor Providing Speed Change on Finishing Cut * Assorted Work and Feed Change Gears * Assorted Stroke Change Gears * 2" Riser Plate * Main Drive Motor 15HP, 650/220 rpm, 240 Volt 60Hz w/Westinghouse Rectifier Unit for AC * Power Forced Lubrication to Working Elements with "Lubriquip Lub Controller" * Coolant Tank, Pump, and Piping, With Chip Pan * Full Complement of Electrics * Assorted Guards, Covers * 84" T-Slotted Table * Hydraulic System * Work Lamp * Work Platform * Cutter Adaptor * Manuals Specifications: Max. Diameter External Gear Cut (Nominal): 70" Max. Diameter Internal Gear Cut (Nominal): 88" Max. Diameter Workpiece Accommodated: 104" Worktable Diameter: 84" Max. Permissible Weight of Workpiece & Fixture: 36,000 Lbs. Max. Distance Workspindle Centerline to Centerline of Cutter Spindle: 35" Min. Distance Workspindle Centerline to Centerline of Cutter Spindle: 0" Max. Work & Fixture Clearance Height w/Cutter Spindle in Upper Position: 28" Max. Diametral Pitch (full length teeth): 2 DP Max. Diametral Pitch (stub teeth): .75 DP Max. Diameter Pitch (30P.A. splines): 2-5/5 DP Diameter of Cutter Spindle: 6.25" Max. Stroke Length: 19.118" Max. Face-Width (nominal): 15" Gbjdpjrtrxisfx Afueu Stroking Speeds (infinitely variable): 5 to 122 S.P.M. Max. Infeed of Cutter Ram: .0020 inch/min. Min. Infeed of Cutter Ram: .0005 inch/min. Max. Rotary Feed Per Stroke (per 1" of cutter diameter): .0068"/Min. Min. Rotary Feed Per Stroke (per 1" of cutter diameter): .0006"/Min. Approximate Machine Dimensions: 192"L x 144"W x 150"H Approximate Machine Weight: 95,000 Lbs.

Condition: excellent (used), For sale: a professional, two-spindle eyeletting/riveting machine, Constantin Hang Typ 150 3P, manufactured in Germany in 1983. This machine is designed for the simultaneous installation of two eyelets or rivets, significantly increasing work efficiency. The machine is used in bookbinding facilities, printing companies, and factories producing binders, folders, calendars, tags, and other paper products. It is equipped with two working units, an adjustable table, and precise guides that allow for accurate material positioning. Technical specifications: Manufacturer: Constantin Hang Maschinenfabrik Model: Typ 150 3P Year of manufacture: 1983 Serial number: 35805 Country of manufacture: Germany Type: two-spindle eyeletting/riveting machine Two working heads Adjustable work table Guides and material position adjustment Robust industrial construction Electric drive Condition: used Applications: eyelet installation, riveting, binder production, Gbodpfeziwnnjx Afusu folder production, calendars, promotional tags, cardboard packaging, bookbinding and printing. The machine is sold in the condition shown in the photos.

Condition: ready for operation (used), Heidenhain UVR 150 power supply unit ID 366 320-01 SN:12157097. The item has been completely overhauled and comes with a 3-month warranty, used, in good condition, 100% functional, scope of delivery as shown in the photos. Gbodpfx Afsx Dw A Isuou

Year of construction: 2022, condition: excellent (used), Fully automatic pallet wrapper with film pre-stretching Inventory no. 3974 Manufacturer: Matco Type: B 200 * Year of manufacture: 2016 * Turntable positioning via fixed stop * Number of bottom and top wraps * Turntable diameter: 2000 mm * Max. wrapping height: approx. 2700 mm * Own weight: approx. 550 kg Gbedsz Rq Sbspfx Afusu * In very good condition * Suitable for Euro pallets and block pallets!!! * Ramp

Condition: excellent (used), Year of construction: 2015, General information Gsdjy N Sdtopfx Afujbu Field of application: Construction Weights Empty weight: 1.500 kg Functional Dimensions of cargo space: 200 x 70 x 80 cm CE mark: yes Maintenance, history and condition Number of owners: 1 Technical condition: very good Visual appearance: very good Other information Fits to following machines: 19 - 32 t Remanufactured: Yes Delivery terms: EXW Working pressure: 160-180 bar Required hydraulic flow: 170 l/min Strike count: 320-640 Latest inspection: 2026-04-27 Production country: DE Additional information Please contact Ö. Inalkac for more information We offer you Rebuild/overhauled/ überholt Atlas Copco/ Epiroc MB1700DP from 2015. This model has New seal kit, retainer pins, bushes, stop pin, chisel/tool, shock absorber, hoses, decals, ContiLube and new painted. More units available. We can ship worldwide. MB1200 HB2000 MB1650 MB1700

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 516342V00017, Year of construction: 2019, operating hours: 13,119 h, load capacity: 7,000 kg, lifting height: 3,520 mm, fuel type: electric, mast type: duplex, fork length: 2,400 mm, TECHNICAL DETAILS Lifting capacity: 7,000 kg Lifting height: 3,520 mm Fork length: 2,400 mm Maximum fork width: 1,930 mm Minimum fork width: 560 mm Number of wheels: 6 MACHINE DETAILS Mast type: Duplex Fuel type: Electric Battery brand/type: Still Battery year of manufacture: 2019 Battery voltage: 80 V Battery capacity: 1,240 Ah Battery test result: 65% Operating hours: 13,119 h Dimensions & Weight Dimensions (L x W x H): 3,750 x 2,000 x 2,920 mm Shipping weight: 12,414 kg Number of shipping packages: 1 EQUIPMENT Gbsdpfx Afoz D Urkeueu Side shift 4-way fork spreader Work lights Full cabin Heater Documentation CE marking

Condition: new, pressure 150 t stroke 300 mm table surface area 1070 x 290 mm column travel between the guideways 1070 mm ajustment speed 9.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec engine output 11.0 kW weight of the machine ca. 2070 kg. range L-W-H 2200 x 1200 x 2550 mm Display machine from 2023 With only approximately 2 operating hours Gbsdpfx Asxabnajfueu Like new condition Special price upon request Furnishing: - Robust electro-hydraulic workshop press, with adjustable cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual

Condition: new, functionality: fully functional, machine/vehicle number: NEW-11, empty load weight: 546 kg, maximum load weight: 2,166 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 2,760 mm, loading space width: 1,500 mm, loading space height: 300 mm, suspension: other, tire size: 195 / 50 R 13, maximum speed: 100 km/h, color: silver, trailer brake: trailer braked, Year of construction: 2026, brakes: other, SARIS K1 276 150 2700 2, Rear Tipper NEW VEHICLE Internal dimensions: 276cm x 150cm Side board height: 30cm Loading area height: 67cm Total weight: 2700kg Payload: 2154kg Braked tandem axle trailer Overrun brake and handbrake by KNOTT 2x 1350kg axle with brake Low chassis Fully welded, hot-dip galvanized steel frame Aluminum profile side boards with tensioning latch Can be folded down and removed on all sides 15mm thick, non-slip, and robust screen-printed plywood floor Additional steel plate on the plywood floor Automatic jockey wheel with 400kg support load 6 noise-reducing lashing eyes with 800kg tensile force Reinforced 13" C-tyre with steel valve M+S tyres Net/rope hook on the frame 13-pin plug LED marker lights at the front Rear lights with reversing light and triangular reflector Upper frame mounted on rubber bearings Large tipping angle of 48 degrees backwards Hand pump with adjustable handle OPTIONAL ACCESSORIES, PERMANENTLY REDUCED PRICES FROM FEBRUARY 2026 -Equipment for 100km/h (shock absorbers) -Spare wheel with holder -Without side boards (price reduction) -Side board height increased to 35cm -Black Edition (Powder-coated side boards and rims in black) -Ramps -U-profile for attaching the original SARIS ramp -Electric tipping control -Charger -Remote control -Bluetooth remote control -Emergency hand pump in combination with electric operation -Safety support for maintenance work on the tilted vehicle -Complete LED lighting -Theft protection -Net, fine or coarse mesh -H-frame -Leaf grid in various heights, also closed -Extension side boards 30cm with tensioning latch -Flat cover with or without rail -High cover 160cm or 180cm Further accessories on request! Plus freight to Gera and vehicle registration document €200 net Images are for illustrative purposes only and may show optional accessories at an extra cost. Haven't found the right trailer yet? We have 50-100 vehicles permanently and immediately available in stock. The workshop is open on weekdays from 8:00 to 17:00 for all types of repairs. Specialist in axle repairs, also for caravans. Large selection of rental trailers. Gbodjghpcljpfx Afusu Hnobqeghpbyeupd Nfoh We also have a large selection of spare parts and accessories for trailers from all manufacturers. Get advice by phone, visit our website or come directly to us.

Condition: excellent (used), Weiss WT-1300/70/15 Temperature Testing Chamber Manufacturer: Weiss Umwelttechnik GmbH Type: WT-1300/70/15 Water-cooled temperature testing chamber with touch panel control for temperature tests in research, development, quality assurance, and industry. Technical Data Temperature range: -70 °C to +180 °C Test chamber volume: approx. 1340 liters Temperature change rate (heating): 15 K/min Temperature change rate (cooling): 10 K/min Temperature deviation (over time): ± 0.1 to ± 0.5 K Temperature homogeneity (spatial): ± 0.5 to ± 2 K Test chamber dimensions: Height 920 mm Width 1100 mm Depth 1330 mm External dimensions: Height approx. 2050 mm Width approx. 1300 mm Depth approx. 3200 mm Permissible test specimen load: Test chamber floor: 150 kg Insert shelf: 50 kg Electrical Data Rated voltage: 3/N/PE AC 400 V ±10 % 50 Hz Rated current: 63 A Rated power: 44 kW Refrigeration System Refrigerant R404A: 14.0 kg Refrigerant R23: 5.4 kg R404A LP max.: 18 bar R404A HP max.: 25 bar R23 LP max.: 19 bar R23 HP max.: 25 bar Standing pressure: 18.5 bar Equipment Touch panel control Stainless steel test chamber Multiple insertion levels Side access port Heated door seal Water-cooled refrigeration unit CEE connection CE marking Weight: approx. 1500 kg Condition Used equipment from industrial application. Optical condition as shown in the pictures. For the safety of our customers, the following work will be carried out on the offered climate chambers beforehand: Gbsdpfx Afoza Dv Isusu 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Scope of delivery: see pictures Shipping or freight transport possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: excellent (used), Here we offer a Feutron climate test chamber. Feutron Climate Test Chamber Temperature Temperature range: -40...90°C Climatic range (without heat load): 10...85°C Temporal temperature deviation during temperature operation: ≤ ± 0.5 K/min Temporal temperature deviation during climatic operation: ± 1.0... ± 1.5 K/min Change rates Heating: avg. 2.0 K/min Cooling: avg. 2.0 K/min Standard IEC 1646 is achievable with testing, solar modules up to max. 160kg weight and nonlinear ramps (setpoint jump) Drying Air drying: condensation drying Humidity Air humidification: steam humidification Humidity range: 10...95 % r.h. Temporal humidity deviation: ≤ ± 3.0... ±5.0 % r.h. Dew point range: 8...80.9°C Test Chamber Test chamber volume: 7.0 m³ Dimensions Internal dimensions: Width 1500 mm x Height 2250 mm x Depth 2000 mm Swing door DIN right, heated, Width 900 mm x Height 2100 mm Observation window, heated, with blackout shutter and lockable: Width 500 mm x Height 600 mm Feedthrough: 2x, right front side, Ø 75 mm Irradiation unit, test chamber Gjdpfszd Sdgex Afujbu Opening: 4x in left side wall for SC 2500, each 850 x 700 mm Irradiated area when using SC 2500: 1200 x 1200 mm Radiation intensity at 1.0 m wall distance: 1000 ± 10% W/m² Lighting: 1x halogen lamp, 200W Refrigeration system: Bitzer compressor, semi-hermetic, 2-stage, air cooled Condenser: split condenser (outdoor installation, winter control) Refrigerant: R507 / R23 Temperature control system Coolant medium Tyfocor / water Mixing ratio 50/50% Coolant density: 1.072 kg/dm³ Filling quantity: approx. 80 dm³ Pyranometer Temperature range: -40...150°C Max. radiation absorption: 4000 W/m² Spectral range (50% points): 305...2800 nm Sensitivity (nominal): 7 µV/W/m² Power supply, test chamber Mains connection: 400V, 3/N/PE, AC, 50Hz Connection type: hardwired Max. simultaneous power demand: approx. 32.0 kW Supply fuse: 3 x 63, Char C (A) Power supply, SolarConstant Mains connection: 400V, 3/N/PE, AC, 50Hz Connection type: Max. simultaneous power demand: approx. 30.0 kW Supply fuse: 3 x 63, Char C (A) Overall external dimensions of the test cell including: equipment room/control cabinet and control cabinet for SolarConstant 2500 External dimensions equipment room: Width 3440 mm x Height 2580 mm x Depth 2950 mm /control cabinet: Width 2200 mm x Height 1830 mm x Depth 1100 mm External dimensions condenser, split: Width 900 mm x Height 950 mm x Depth 2000 mm Weight test chamber (total): approx. 2700 kg Condenser empty weight: 153 kg Weight: 2700 kg Type: 3707/06 Condition: used Scope of delivery: (see picture) (Technical data and information are subject to change and errors!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), Catalog number 7308 TECHNICAL DATA - track width 250mm - shaft width 350mm - shaft diameter 80mm - max blade diameter 400mm - blade bore diameter 80mm - max cutting height 150mm - table width with clearance 700mm - table length 1790mm Gbedozww A Ijpfx Afusu from above: - pawls - pressure shaft, sliding - pawls - pressure shaft, smooth - shaft with saw blades - smooth pressure shaft, 2 pcs from below: - guide strip - sliding, smooth shaft - pawls - track feed table - roller width 500mm - number of rollers 3 pcs - overall dimensions of the feed table (length/width/height) 580x530x900mm outfeed table - roller width 500mm - number of rollers 6 pcs - overall dimensions of the outfeed table (length/width/height) 1210x535x900mm - central lubrication - stepless feed speed adjustment - main motor 37kW - dust extraction nozzle diameter 140mm - overall dimensions of the multi-blade saw (length/width/height) 2000x1450x2000mm - total weight approx. 3000kg ADVANTAGES – German production – large cutting height – feed and outfeed tables – used multi-blade saw, very good condition Net price: 46900 PLN Net price: 10910 EUR Net price calculated according to the exchange rate of 4.30 PLN/EUR (the price may change in case of larger exchange rate fluctuations)

Condition: used, machine/vehicle number: 008463, Max. working width: 1700 mm Max. working thickness: 60 mm Gbsdpfx Afsz Eyxfjuou

Condition: new, New refrigeration compressor (compressor) from the renowned manufacturer Copeland. Condition: New – warehouse stock (old stock), with no signs of operation. The compressor is factory-prepared, protected, and equipped with safety labels. Gbjdpeyga Utofx Afueu Identification data (from nameplate): • Manufacturer: Copeland • Type: D3RS/1500/EWM7000 • Catalog number: 606.110.14 • Serial number: 356784 (BBC-YORK) • Design: semi-hermetic • Application: refrigeration / air conditioning system • Configuration: Block 1 • Start-up: U. Direct start (direct-on-line starting) • Equipment: Oil sump heater (Kurbelwannenheizung) Electrical data (from Copeland nameplate): • Power supply: 3~ 50 Hz • Speed: 1,450 rpm • Volumetric capacity: 49.90 m³/h • Voltage: 380–420 V (Y) • Starting current (LRA): 117–129 A • Max. operating current (MRA): 28.8 A • Max. working pressure H/L: 25 / 20.5 bar • Test pressure H/L: 27.5 / 22.6 bar • Degree of protection: IP54 • Year: 1996 Oil (recommended): • Mineral: Fuchs KM / Suniso 3 GS / Capella WF 32 / Shell 22-12 The compressor is ideal as a new replacement part, for modernization of refrigeration or air-conditioning installations. Sale as shown in the pictures.

Condition: excellent (used), CATALOG NUMBER 7614 Technical specifications: - inlet width 550mm - inlet height 220mm - shaft width 630mm - blade length 630mm - number of blades 2 pcs - screen dimensions 60x60mm - 2 toothed drive shafts from below - motor for lower shafts approximately 1.5kW - toothed drive shaft from above - motor for upper shaft approximately 1.5kW - vibratory feeder - vibratory feeder length 4750mm - vibratory feeder width 450mm - main motor 45kW - vibratory feeder motor 1.5kW - auto-reverse - reverse gear - overall machine dimensions (L/W/H) 3200x1700x1400mm - overall machine dimensions (L/W/H) 4750x800x1100mm - weight approximately 4500kg ADVANTAGES – auto-reverse (with adjustment option) – reverse gear – used shredder, very good condition Net price: 120900 PLN Net price: 28116 EUR, depending on the exchange rate of 4.30 EUR Gbsdpfoza Eipsx Afusu (Prices are subject to change due to significant fluctuations)

Condition: ready for operation (used), functionality: fully functional, power: 0.37 kW (0.50 HP), DMN BL-150 Rotor: stainless steel (scraping blades) Housing: steel 2.5 liters per revolution 20 rpm Gjdpfez Rpn Usx Afujbu Motor: 0.37 kW 1380/20 rpm 1.24 A 4 units available

Condition: used, Year of construction: 2021, operating hours: 7,593 h, load capacity: 4,500 kg, lifting height: 3,180 mm, mast type: duplex, fork length: 2,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 4,500 kg Lifting height: 3,180 mm Fork length: 2,200 mm MACHINE DETAILS Gbjdpfsz Iwi Tox Afusu Mast type: Duplex Drive type: Diesel Dimensions & Weight Dimensions (L x W x H): 5,600 x 1,500 x 2,400 mm Dead weight: 6,413 kg UVV valid until: 04/2027 Next service due in: 564 hours Operating hours: 7,593 h EQUIPMENT 3rd + 4th valve Free-lift mast without central hydraulic cylinder Formerly a Still full-service unit Hydraulic fork positioner Side shifter Full cab Heater Windshield wiper White, non-marking tires LED work light (front) LED work light (rear) StVZO lighting with turn signals for road approval Comfort seat with lumbar support Seat heating All dimensions are rounded values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. A storage fee of €20 per machine per day will be charged if the machine is not collected on time. Outstanding storage fees must be paid in full before collection. Lot number: 32

Condition: new, pressure: 150stroke: 300column width: 1570working speed: 5retracting speed: 10Workshop Press: Steel welded construction Any stop position Pressure gauge Safety valve against overload 2 V-prisms Height-adjustable table Table up/down device Control with operating lever Equipment according to CE regulations, operating manual in German (Sample photo) Specifications: Press force: 150 tons Motor power: 11 kW Gjdpfx Aod Ab Ndsfuobu Stroke: 300 mm Clear distance between columns: 1,570 mm Piston Ø: 280 x 200 mm Feed speed: 9 mm/s Working speed: 5 mm/s Return speed: 10 mm/s Length: 2,500 mm Width: 1,000 mm Height: 2,270 mm Weight: 2,100 kg