Used Comec Sander For Curved-Line Elements for sale (16,043)

Condition: as good as new (ex-display), Year of construction: 2021, Direct from closed meat-free factory which opened in 2021. All machinery in near new condition and from 2021 and 2022. Very low running hours. Can be sold as whole line. Priced for end users only. New cost from GEA £1.66M Hnodpfx Aeyvav Nskrju

Condition: as good as new (ex-display), Year of construction: 2021, Direct from closed meat-free factory which opened in 2021. All machinery in near new condition and from 2021 and 2022. Very low running hours. Can be sold as whole line. Priced for end users only. New cost from GEA £1.66M Hnsdpeyvau Ejfx Akrju

Condition: used, 72”x 0.5” x 60,000Lb Braner Turret Type Loop Slitting Line Braner Turret Type Loop Slitting Line is used for coil metal cross cutting with maximum width 72”, maximum 0,5” metal thcikness and 60,000Lb coil capacity Make: Braner Year New: 1996 Material Thickness: .060″ – .500″ Material Width: 12″ – 72″ Coil Weight: 60,000Lb Line Speed: 120 – 250 feet per minute Coil ID: 20″ – 24″ Coil OD: 75″ Slitting Cap: .500″ / 4 cuts – .125″ / 40 cuts Entry L-Type Coil Car Hydraulic Lift & Traverse Self Contained Hydraulics Hnodpfsrn Sqhjx Akrsu Control Panel Mandrel Uncoiler Powered Hold – Down Roll Outboard Bearing Support Hydraulic Feed-Up Drive Water Cooled Brake Hydraulic Peeling Table Driven Entry Pinch Rolls Adjustable Edge Guides Entry Mechanical Crop Shear Two Turret Type Slitting Heads Arbor Diameter: 12″ Powered Arbor Adjustment Powered Head Rotation Motor: 100HP DC Drive Lots of Knives & Tooling Two (2) Scrap Winders Powered Open / Close Heavy Duty Design Looping Pit Cross Over Table Drag Board Tension Stand Material Feeding Table Recoiler Hydraulic Drum Powered Push Off Hydraulic Over-Arm Separator Outboard Bearing Support 300HP DC Motor Drive Exit L-Type Coil Car Hydraulic Lift & Traverse Self Contained Hydraulics Upgraded Siemens Digital Drives, Electrics, Controls, Knives & Tooling

Condition: refurbished (used), ROLLFORMING LINE Hedpfx Akjg Rkv Eorenu

Condition: used, Year of construction: 1990, Heavy-duty rollforming line Hsdoymzzuspfx Akronu 10 stations Width: 260 mm

Condition: used, Year of construction: 1990, HEAVY DUTY ROLL FORMING LINE Hodpjymzxyjfx Akrjnu 9 STATIONS WIDTH: 450 mm

Condition: excellent (used), Year of construction: 2013, I sell the double mitre saw without scoring throughfeed COMEC TD2400 + CA. Working width 167 to 2400mm. Max. saw profile 80 x 100mm Angular setting of each head: Radial +50° / - 50° Axial +45°/ - 45° Saw blade diameter fi.350/30mm Motor power 1.85KW + 1.85 KW Magazine for elements. Return of the element to the operator Hnjdpot Rn Smofx Akrsu Condition like New. Fully working and ready for use. Possible to try. Available immediately. With CE and complete documentation.

Condition: used, Year of construction: 2019, Pressure total: 1000 ton Stroke: 170 mm Shut height (stroke down, adjustment up): 490 mm Slide adjustment: 16 mm Max. stroke rate: 32 s.p.m. Table surface area : 800x800 mm Ram surface: 825x860 mm Free frontal opening L-R: 900 mm Upper ejector stroke: 16 mm Upper ejector capacity: 10 ton Lower ejector stroke: 80 mm Lower ejector capacity: 32 ton Dimensions L x W x H: 2950x1950x4090 mm Machine weight: 26 kg Main drive: 33,5 kW Standard configuration PRESS :original mechanical parts all other components are European brands and standards (lubrication, electrical, pneumatic...) Extended machine accessories Hnedpfx Akjywztgsreu Full line ready to produce including : *New AMIDEC (France) 2 axis transfer arm, equipped with: 2 grippers for the handling of billets1 nozzle for cleaning and lubrication of forging tools *New Induction s.r.l. (Italy) heater 200kW designed to heat carbon steel billets diameter 24 to 75,5mm, length 22,1 to 33,1mm. 700 to 800°CScope of supply of the heating systemA/ M.F. Static converter model IHFT 200 K4B/ Frame for the M.F. capacitors and inductorsC/ automatic loading system for disc-shaped billets with reversible box- Tilting box- Storage conveyor- Vibrating bowl- Command and control cabinet- Steel support - Soundproof cabineD/ 1 system for the introduction of the billets to the inductor and 1 system for exit of the billets.E/ Inclined inductor length 1200mm with inox pipe F/ 1 automatic inductors exchange double version (for 2 inductors)G/ 1 optical pyrometer H/ 1 integrated dry supply transformerI/ PLC Siemens S1500 installed on the converterJ/ Cooling system  Tools

Condition: used, machine/vehicle number: 007676, Position 1: Brushing Machines BARBERAN-ECO-1700-H-SI Position 2: Gluing Machine BARBERAN-ECO-1700-H-SI Position 3: Continuous Cycle Presses BARBERAN-ECO-1700-H-SI Position 4: Continuous Cycle Presses BARBERAN-ECO-1700-H-SI Hnodpfjwuzzrjx Akrou

Condition: used, Comec FR/2 Automatic programmable milling machine for pediatric bed legs or similar elements. Overhauled machine, new software Hneder R H D Hjpfx Akrsu

Condition: excellent (used), Year of construction: 2020, Complete forming to freezing line Excellent condition Upgrade your food production with our comprehensive burger, nuggets, and patties production line! From forming to IQF freezing, this line covers all stages with top-tier equipment from ALCO, JBT, and Schomaker. Watch to see our complete production line in action: Hnjdpfetykvhsx Akreu Forming Machine: ALCO / JBT AFM 400 PC Breader: ALCO / JBT APN 400 Battering Machine: ALCO / JBT ASC 400 Meatballs Machine: Schomaker-tec BRU 600-488 Shuttle Conveyor: Schomaker (400 to 600 mm transfer) Fryer: Schomaker Oil Management System: Schomaker Linear Oven: Schomaker Shuttle Conveyor: Schomaker (600 mm to 400 mm transfer) Key Features: High efficiency and precision Comprehensive solution from forming to freezing Advanced technology ensuring product quality Contact us for more information and inquiries:

Condition: used, FOREST-LINE SERAMILL V3 270 2T is a gantry milling machine designed for high-precision machining, high accuracy and process reliability. Working capacities: 2 tables (table lengths 3000 mm and 4000 mm, widths 2000 mm), X axis 5000 mm (with 1 table), Y 3400 mm, Z 1250 mm, A axis ±135°/2.5° and C axis 360°/2.5°; distance between columns 2700 mm, table load max. 10,000 kg. Main specifications: spindle nose SK50, spindle speeds 10–6000 t/min, spindle motor 31 kW, spindle torque 430 Nm, total power required 90 kVA; feeds 1–30,000 mm/min on X/Y/Z; rapid traverse X 30’000 m/min, Y 40’000 m/min, Z 30’000 m/min; voltage 3x 400 V 50 Hz. Equipment: tool magazine 120 places, tool holder 700 pce, automatic tool setting BLUM, touch probe M&H. Delivers tight tolerances and is suited to automotive, aerospace, machine tool, medical and watchmaking sectors. Hsdpfx Akoy T N Ttsrsnu

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 23-034, total width: 1,100 mm, total length: 4,570 mm, total height: 2,060 mm, A packaging machine from the company Smartvac which was exhibited at trade fairs. - Bottom film width: 320(+2/+4) mm - Top film width: 302(+/-1) mm - Peel length: 220 mm - Deep draw: 100 mm - Machine design for vacuum packs Hnsdpfx Akoq H R Taereu Maximum pack size: 281 x 202 x 100 mm

Condition: used, machine/vehicle number: 008276, Position 1: Planers/Moulding Machines KENTWOOD-FEEDMAC31+M200+FEEDMAC33 Hnsdpfx Akox A Tbwsrju Position 2: Panel Feeding and Loading KENTWOOD-FEEDMAC31+M200+FEEDMAC33 Position 3: Panel Stacking and Offloading KENTWOOD-FEEDMAC31+M200+FEEDMAC33

Condition: used, Year of construction: 2008, Manufacturer: COMEC Model: FUST-P-40 Year: 2008 Type: Semi-automatic filling line Containers: Drums, cans, off-centre-neck containers Max. container height: 500 mm Theoretical output: 200 x 20-litre containers per hour Dosing method: Weight-based, using a load cell Weighing range: 0.5 to 30 kg Accuracy: 10 g Calibration: Automatic Filling speeds: 2 (high flow rate / low flow rate within the same cycle) Filling spout: With anti-drip valve Conveying: Roller conveyor Capping: Manual placement, tightened using a hand-held pneumatic screwdriver Control: Control panel Hnodpfxjz Ic Nfo Akreu FAP-200/1 type feed unit - Filter (cylindrical coil): 500 microns - Pneumatic diaphragm pump - Flow rate: 2 to 4 m³/h - Transport trolley Documentation: Available Video: On request

Condition: used, machine/vehicle number: 007665, Position 1: Automatic Drilling Machine WEEKE-BST 503 + BST 507 Hjdpfxjwuz Dgj Akrsnu Position 2: Automatic Drilling Machine WEEKE-BST 503 + BST 507

Condition: ready for operation (used), Plastic Film Wash Line with Extruder Available in Ireland Can be seen running if necessary Sink Float Tank Centrifuge Washer Dryer Hedjzylxiopfx Akrenu Extruder Granulator Shredder Everything required for the washing and recycling of Plastic Material 1 Tonne per Hour

Condition: refurbished (used), Year of construction: 1999, travel distance X-axis: 11,450 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,250 mm, Technical Specification Hodpfx Astix S Nokrsnu Travel distances X-axis: 11,450 mm Y-axis: 3,500 mm Z-axis: 1,250 mm Cross-section of Z-axis slide: 360 x 360 mm Portal clearance: 3,000 mm Height under vertical spindle: 1,400 mm Working clamping width: 2,500 mm Milling unit: Type FA 305 C Power: 30 kW Max. torque: 1,070 Nm Max. speed: 4,000 rpm Cross-section of the slide: 360 x 360 mm Vertical head with spindle Power: 30 kW Max. speed: 4,000 rpm Max. torque: 1,070 Nm Rapid traverse in X, Z: 25,000 mm/min Rapid traverse in Y: 20,000 mm/min Infinitely variable feed rate in X, Y, and Z: 10,000 mm/min Thrust force per axis: 25,000 N Tool holder: SK 50 Horizontal angle head with 144 x 2.5° indexing, with spindle SK50 Available power: 30 kW Max. speed: 4,000 rpm Max. torque: 1,070 Nm Positioning increment: 2.5 degrees Longitudinal pallet system - 1 pallet shuttle with 2 storage stations - 1 manual pallet transfer system between machine and shuttle - 2 workpiece carrier pallets: 5,000 x 2,500 mm Tool changer Chain magazine: 80 positions Pitch between chain pockets: 130 mm Diameter of consecutive tools: 125 mm Max. tool diameter: 200 mm Max. tool length: 400 mm Max. tool weight: 25 kg Tool change time, tool to tool: 8 sec Tool change time, chip to chip: 38 sec Equipment: Cooling systems: - Cooling via adjustable nozzles - ICS / coolant through spindle center, 3,000 l tank, Capacity: 30 l/min, pressure: 7 bar at the tool 2 x chip conveyors Portal enclosure Touch probe, make: RENISHAW, type: MP14 Electronic handwheel Remote diagnostics Tool management and wear monitoring Documentation: 2 copies (German / French) CE marking Very well maintained, continuously serviced condition!

Condition: used, machine/vehicle number: 008708, Position 1: Continuous Cycle Presses BIELE-FRAME ASSEMBLY + PRESSING LINE Hnjdpeztaufofx Akrou

Condition: used, Year of construction: 2006, functionality: fully functional, SECOND-HAND ORBITAL SANDER COMEC MOD. LC20AV - CE RULES - Adjustable feeding speed - Min/max. working diam. 30/150 mm. - Min. bending radius 200 mm. - Complete with feeding units - Year 2006 Hnjdpfxox Rh Aze Akrsu

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, Double Column Milling M/C - Gantry Type Brand: FOREST-LINE ALBERT / Type: MODUMILL 300G / Year of construction: 1999 Extensive modernizations in 2008 and 2021 ! Machine with interchangeable vertical and horizontal milling heads with automatic indexing. The machine can be inspected by appointment. Very well-kept, continuously maintained condition! TECHNICAL DATA: - CNC Control: SINUMERIK 840D - Travels X/Y/Z: 11.450 / 3.500 / 1.250 mm Cross-section of the Z-axis slider: 360 x 360 mm - Gantry passage: 3.000 - Height below vertical spindle: 1.400 mm - Working clamping width: 2.500 mm - Fixed table dimensions: 5.000 x 2.500 mm - Longitudinal pallet system EQUIPMENT: - Tool changer (chain magazine): 80-positions - Cooling through the spindle centre - 2 chip conveyors - Gantry panelling Hnjdpfxezfbi Io Akreu - Touch probe, Brand: RENISHAW - Electronic hand wheel - Remote diagnosis - Tool management and wear management - CE marking Electrical connection values: - Total power requirement: 130 kVA - External dimensions of the machine: 22,6 x 8,0 x 6,3 m There is no guarantee for correctness and completeness of the technical details and accessoires. - Subject to prior sale - Detailed technical data sheet and information on equipment available on request.

Condition: used, Year of construction: 2018, Sander Multizon ozone generator with a rated output of 120 g of ozone per hour. Technical data according to the nameplate: - Manufacturer: Erwin Sander Elektroapparatbau GmbH - Machine: Multizon ozone generator, 120 g/h - Type: - Machine no.: 2582 - Year of manufacture: 2018 - Rated output: 120 g ozone/h - Ozone concentration: 20 g ozone/m³ - Permissible operating pressure: -0.05 bar Hnsdpfsz Ri S Tex Akrju - Air flow rate: 6.0 m³/h - Electrical connection: 400 V – N – PE, 50 Hz - Power requirement: 12 kVA (excluding injector pump) - Current consumption: L1 13 A; L2 5.4 A; L3 10 A - Weight: 330 kg - CE marking

Year of construction: 2019, condition: used, Center height: 200mm, distance between centers: 1000mm, swing over bed/cross slide: 400mm/225mm, spindle bore: 62mm, spindle nose: DIN 55027/6, tailstock taper: MK4, max. spindle speed: 4000rpm, main drive power: 10.5kW, operating hours PLC/motor: 1218h/145h, Control: Heidenhain. Machine dimensions X/Y/Z: approx. 2100mm/1080mm/1800mm, weight: approx. 1800kg. An on-site inspection is possible. Hjdpfx Akszwftbsronu

Condition: good (used), Tranklein BP bookbinding press for pad/block pressing The machine is in very good condition, fully functional, and ready for production. Power supply: 380V. Fast operation. Hydraulic power unit. Format: 340 x 260 mm. Stack height: 820 mm. Adjustable pressing force, max. 2500 kg. Hnedpfsz S Utlsx Akreu Weight: 250 kg. Mounted on casters for easy movement.

Condition: used, Year of construction: 2018, functionality: fully functional, number of straightening rollers: 6, conveyor belt width: 1,300 mm, sheet thickness steel (max.): 1 mm, coil width: 1,250 mm, cutting length (max.): 6,400 mm, straightening roller diameter: 70 mm, space requirement width: 3,500 mm, space requirement length: 18,275 mm, space requirement height: 4,000 mm, Single-person operation, rapid access to a wide variety of sheets, automatic sheet changeover, standard sheets remain loaded in the system; the upper sheets are less common types; secure solution with a movable access aid for loading the upper decoilers; programmable slitting line with 8 pairs of knives in station version; slitting knives are alternately arranged for distortion-free cutting; rotary knives of the AL p with 100 mm diameter to achieve minimal incision; 7.2 m long conveyor belt for discharging the strips. Hnedpfx Aoxwc E Iekreu The system layout PDF is shown as a mirror image!