Used D-Tec D-Tec Ctd-40-04Db Dolly Complete Lzv Combo for sale (70,740)

Condition: used, maximum load weight: 28,360 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 12/2021, loading space volume: 57 m³, total width: 2,550 mm, total height: 3,900 mm, Equipment: ABS, D-Tec FL-3-S Steel Tipper 57 m³ - Cargo area length: 11,516 mm - Height: 3,900 mm - Width: 2,550 mm - Permissible total weight: 36,000 kg - Unladen weight: 7,640 kg - SAF axles with disc brakes - 385/65 R22.5 - ABS - Alloy rims - Aluminium landing legs - Air suspension - Wheel chocks - 1st axle is a lift axle Lhsdpfx Akoyzvf Esyoh - Open side underrun protection - Grain chute - A-board - Plastic toolbox - Platform - Roll tarp 680 g/m2 - 5x tarp holders - Multi-chamber lights (standard) - 4x work lights - LED marking lights, flashing - Acoustic reversing warning device For further information, we are happy to assist you.

Condition: new, maximum load weight: 31,330 kg, overall weight: 36,000 kg, axle configuration: 3 axles, total width: 2,470 mm, total height: 1,280 mm, Year of construction: 2026, Equipment: ABS, FT-LS-S-ECO D-TEC FLEXITRAILER FT-LS-S * 3-axle multi-container chassis, suitable for 45 ft containers, length >16.5 m (2 wheelbases) * 40 ft (2 wheelbases), 30 ft, 2x 20 ft and 20 ft flush with rear * 9-tonne Valx axles with disc brakes Ø 430 mm * Rims offset ET 120 * Automatic lift axle on the first axle * Operable via a switch on the chassis or by pressing the service brake three times * With traction aid, load on 2nd and 3rd axle up to 130% under 30 km/h Lhodpfoyq Ufnox Akyoh * Raise/lower via EBS modulator control * Tyre size 385/55 R22.5 * Fifth wheel height: 1100 mm * Branded tyres at manufacturer’s discretion, tyre pressure monitoring system * Wheel chocks * Removable hot-dip galvanized front container guides * Frame top edge hot-dip galvanized * Paint: 1 layer, 2K RAL 9005, matt * 15-pin connector * Flashing side marker lights * Multi-chamber tail lights

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 10/2004, total width: 2,470 mm, suspension: air, tire size: 385/65, tire condition: 30 %, color: other, Year of construction: 2004, Equipment: ABS, = Additional options and accessories = - Air Suspension - BPW Axles - Drum brakes - Lift Axle = More information = Axle configuration Tyre size: 385/65 Lsdpjzbmr Uofx Akyehh Make axles: BPW Brakes: drum brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Tyre profile: 30% Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Weights Empty weight: 5.300 kg Carrying capacity: 37.700 kg GVW: 43.000 kg Maintenance APK (MOT): tested until 01/2027 Identification Registration number: OH-91-RL

Condition: good (used), axle configuration: 3 axles, first registration: 11/2006, total length: 9,500 mm, total width: 2,550 mm, total height: 1,750 mm, suspension: air, tire size: 385/65R22,5, color: other, Year of construction: 2006, Equipment: ABS, = Additional Options and Accessories = - EBS = Notes = Number of axles: 3, Payload: 37650 kg, Tare weight: 5350 kg, Gross vehicle weight: 43000 kg, Chassis type: Complete chassis, Kingpin size: 2 inch, Suspension type: Full air suspension, ABS, EBS, Body construction year: 2006, Extendable chassis: middle / rear, Extendable length: 310, Axle type: BPW, NL APK valid until 21-11-2026 // 2X LIFT AXLE // SAF AXLES = Additional Information = General Information Cab: Day cab License plate: OJ-82-ND Powertrain Fuel type: Diesel Transmission Gearbox: Manual gearbox Axle Configuration Tire size: 385/65R22.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: Lift axle; Tire tread depth left: 13 mm; Tire tread depth right: 8 mm Axle 2: Tire tread depth left: 6 mm; Tire tread depth right: 12 mm Axle 3: Lift axle; Tire tread depth left: 4 mm; Tire tread depth right: 7 mm Weights Tare weight: 5,350 kg Payload: 37,650 kg GVW: 43,000 kg Environment Emission class: Euro 0 Maintenance APK (Technical Inspection): valid until 11.2026 Condition Technical condition: good Optical condition: good Damage: none = Company Information = Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here you can choose from a constantly changing inventory of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? It's simple! • Large, rapidly changing inventory • Recognizable quality • A good price • Honest business practices • We speak many languages • We understand our customers • Assistance with import and transport Ledjzaz E Topfx Akyshh • (Export) registration can be arranged quickly • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and submit an inquiry via our website. Ask directly about our European warranty package.

Condition: used, maximum load weight: 33,360 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 04/2025, next inspection (TÜV): 04/2026, loading space length: 6,000 mm, loading space volume: 29 m³, total width: 2,470 mm, total height: 3,900 mm, Year of construction: 2025, Equipment: ABS, D-TEC 3-axle container chassis 20 FT ADR with VANHOOL single-chamber pressurized tank, 29 cbm First registered April 2025 Tank container built in 2006 Unladen weight 5,640 kg Steel chassis, fully spray-galvanized and painted in 2-layer RAL 9005 Fifth wheel height 1,180 mm Tires: 6 x 385/65 R 22.5 Hankook High-gloss aluminum rims All-LED lighting, round rear headlights 2 x LED work lights SAF axles with large disc brakes, 430 mm 1st axle LIFT AXLE KNORR Trailer EBS VANHOOL 20 FT tank container, V2A stainless steel Single-chamber 29,362 L volume Test pressure 2.86 bar Operating pressure 2 bar Lhjdjyxb Hcjpfx Akysh Door cover DN500 Outlet at the rear center of the stainless steel casing RENTING is the new BUYING. Rental or full-service leasing is available immediately.-----

Condition: used, empty load weight: 5,571 kg, maximum load weight: 37,429 kg, overall weight: 43,000 kg, axle configuration: 3 axles, first registration: 03/2017, next inspection (TÜV): 11/2026, total length: 24,700 mm, total width: 14,200 mm, total height: 140,100 mm, suspension: air, tire size: 385/55 R 22.5, color: blue, Year of construction: 2017, front tire size: 385/55 R 22.5, rear tire size: 385/55 R 22.5, emission class: none, Equipment: ABS, ABS, axle manufacturer BPW with disc brakes, air suspension with lift function (raising and lowering), lift axle on the first axle, central and rear extension, 20-45 feet, gooseneck hitch, 2 x LED reversing lights, 2 x 3-chamber tail lights, Genmark genset. Lhsdpfx Aey T Sqhskysh

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 2,155 mm, total height: 2,000 mm, total width: 1,469 mm, overall weight: 3,300 kg, input voltage: 400 V, type of input current: three-phase, warranty duration: 12 months, HYDRAULIC CNC SERVO PRESS BRAKE MTP 40×2000 MTP-3212 The MTP 40×2000 Hydraulic CNC Servo Press Brake is a modern machine designed for precise sheet metal bending in manufacturing plants, workshops, and metalworking companies. Thanks to its CNC controller and high-quality components, it provides accuracy, repeatability, and operator comfort. MAIN ADVANTAGES • 40-ton pressing force • 2000 mm bending length • MTP-3212 CNC controller • Servo-driven X and Y axes • AMADA-type tooling system • Rexroth, Schneider and Omron components • High bending accuracy • CE certification MTP-3212 CNC CONTROLLER The modern CNC controller features a color touchscreen for fast and intuitive programming. The software automatically calculates bending parameters and allows storage of up to 40 punch types. EQUIPMENT • Upper punch Lhedpfx Ajyttfrskyjh • Lower die • 2 front support arms • X-axis – servo drive • Y-axis – servo drive • R-axis – manual adjustment • AMADA-type quick clamping system COMPONENTS The machine is equipped with Rexroth hydraulic valves, Schneider Electric electrical components, and Omron safety devices. Steel hydraulic connections increase system durability and reduce the risk of leaks. SAFETY • Safety light curtain • Side safety guards • Rear safety fence • Emergency stop switches • CE Declaration of Conformity • Operating manual TECHNICAL DATA Pressing force: 40 T Bending length: 2000 mm Maximum sheet thickness: up to 3 mm Distance between side frames: 1600 mm Throat depth: 200 mm Stroke: 100 mm Open height: 300 mm Back gauge travel: 600 mm Motor power: 4 kW Weight: 2950 kg Dimensions: 2200 × 1200 × 1850 mm APPLICATIONS The machine is suitable for the production of metal enclosures, electrical cabinets, ventilation components, steel structures, bent profiles, and custom-made sheet metal parts. DELIVERY AND SUPPORT We organize machine transport throughout Europe. We provide technical support, assistance with machine and tooling selection, and access to spare parts and service. Contact us for more information and discover our complete range of metalworking machinery available on our website.

Year of construction: 2023, condition: used, Manufacturer : Sesotec Model : Raycon D+ HX 1400 / 660 / 450 / 250 Year : 2023 Lhsdpfxey Abcrj Akyjh Type: X-ray detector – X-ray inspection systems for food Product width: max: 450 mm Maximum product height: 250 mm Belt width: 660 mm Detection : 0.4 mm Capacity : 900 pcs/min Speed v = 0,32 -1,04 m/s X-ray Source : 40–100 kV / 2.0–5.0 mA (200 W) Weight : 585 kg Weight / conveyor : 111 kg

Condition: new, maximum load weight: 32,965 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space volume: 30 m³, Year of construction: 2025, Equipment: ABS, New vehicle! Buy, rent, or rent with a purchase option by arrangement! 30m³ D-Tec V2A Slurry Tanker Trailer / Rear-Steering Axle / Lift Axle / NEW VEHICLE Ljdpfjx Suxlox Akyshh ---- * Manufacturer: D-Tec * Model: SV 2006 * NEW VEHICLE * Gross weight: 39,000 kg * Unladen weight (manufacturer specification): 6,035 kg * Payload: 32,965 kg * Axles: 3x Valx axles / 1st axle liftable / 3rd axle rear-steering / disc brakes / traction assist * Suspension: air suspension with raising & lowering facility * Tires: 385/65 R22.5 on steel rims * Color: Chassis RAL 9005 black, tank body RAL 7015 grey * Volume: 30m³ / Ø 2.20 m / single chamber * Wabco EBS * Vogelsang rotary lobe pump * Max. flow rate: 6,000 L/min * Swivel outlet at the rear * 8" docking funnel on top, sealable with a manual gate valve * Filling and venting with pneumatic shut-off valve including safety for all air-operated valves * 1" ball valve on pump right side * 4" flushing pipe with two 2.5" free-fall outlets (1x at the front and 1x in the center of the tank) * Automatic pump shutdown * Pneumatic control box at rear left * 1x foldable dome cover * 5 m hose racks left and right (galvanized steel) * Fill level indicator front left * Operating temperature 0-60 degrees Celsius * Side access ladder left * Empty load supports * Single mudguards * Saddle height 1,180 mm * 24V lighting system * 2x LED work lights at rear * 2x LED work lights left and right German trailer!! German documents!! NEW VEHICLE!! New vehicle! Buy, rent, or rent with a purchase option by arrangement! Note on potential errors in the listing: Despite careful preparation of the ad, errors may occasionally occur in the text or information provided. We accept no liability for mistakes, changes, or prior sale. All details are provided without guarantee. Please contact us to verify details or clarify any questions.

Condition: used, maximum load weight: 32,998 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 02/2024, next inspection (TÜV): 12/2026, loading space volume: 30 m³, Equipment: ABS, Stock no. 5337 Lhodjy Srbkspfx Akyjh For sale, for rent, or lease with purchase option upon agreement! ONLY approx. 68,000 km driven! Approx. 30m³ D-Tec slurry tanker semi-trailer with 6,000-liter Vogelsang pump / rear-steering axle ---- * Manufacturer: D-Tec * Model: VTT-01 * First registration: 02/2024 * Gross weight: 39,000 kg * Unladen weight (as per registration): 6,002 kg * Payload: 32,008 kg * Axles: 3x Valx axles / 1st axle liftable / 3rd axle rear-steering / disc brakes * Suspension: Air suspension with raising and lowering function * Tyres: 385/65 R 22.5 on steel rims * Colour: RAL 7016 * TÜV (roadworthiness certificate): valid until 12/2026 * Volume: 30m³ / Ø 2.20m / single compartment * Vogelsang rotary lobe pump with soft start * Max. delivery rate: 6,000 L/min * 6" swinging outlet at rear * 8" pipework to the pump with gate valve * 8" * Free-fall to swinging arm in 8" with 8" gate valve * 8" docking funnel on top, lockable with air-operated gate valve * Filling and ventilation with air-operated lock incl. safeguarding for all pneumatic valves * 1" ball valve on the right at the pump * 4" flushing line with two 2.5" nozzles (1x front, 1x center of the tank, with pneumatic valve) * Automatic pump shutoff * Pneumatic control panel, rear left * 1x foldable dome cover * 5 m hose holders left and right (galvanised steel) * Liquid level indicator front left * Operating temperature: 0-60°C * Side access ladder left * Unladen support legs * Single mudguards * Sight glasses at rear (1x top, 1x bottom) * Fifth wheel height: 1.180 m * 24 Volt lighting system * 2x LED work lights at rear * 2x LED work lights left and right * 1st hand (one owner) For sale, for rent, or lease with purchase option upon agreement! German vehicle! German documents! Disclaimer for possible errors in the listing: Despite careful creation of this listing, errors may have occurred in the text or specifications. We accept no liability for mistakes, changes, or prior sale. All information provided without guarantee. Please contact us to verify details or clarify further questions.

Condition: new, maximum load weight: 29,965 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space volume: 30 m³, total width: 2,550 mm, total height: 3,800 mm, Year of construction: 2026, Equipment: ABS, Brand new FD-Tec 3-axle tank semi-trailer * SV2011-22-R300 (Tank volume: 30 m³, material thickness: 3 mm stainless steel, temperature range: 0–60°C.) * Former designation SV2006 Basic / Now SV2011 * 8" manual docking funnel * 6" gravity discharge connection * 4" manual cleaning line with 2 x 2.5" nozzles (1 at the front and 1 in the center of the tank) * ABS braking system by Wabco, no electronic air suspension * 9-ton VALX axles, Ø430 disc brake, ET120 * Automatic lift axle on the first axle * Raising/lowering via control from the EBS modulator * Start-up assistance: 2nd and 3rd axles can be loaded up to 130% under 30 km/h * Third axle is a self-steering axle * Apollo Vredestein 385/65R22.5 tires * 24-volt lighting system: 2 x LED work lights at the rear, 1 x on the left side Lhodpfjy Sqrbsx Akyjh * Work lights left and right by the first axle * Standard 15-pin connection + 2 x 7-pin connectors * Flashing side marker lights * Ball valve for drainage at the lowest point of the tank * Vogelsang pump, 6,000 L/min (Pump manufacturer recommends a leakage oil return line) * Automatic pump shut-off * 2 wheel chocks * Left and right (narrow and tall) galvanized steel hose trays, each 5 m (250 mm wide, 190 mm high) * Tension cables above the hose trays * Tire pressure monitoring system, air suspension with lift/lower valve, rotary slide valve * Tank painted with two coats of paint – Category A (without clear coat) * Tank painted in a single color RAL 7030, STONE GREY * Chassis painted in a single color RAL 7016, ANTHRACITE GREY * ...

Condition: new, maximum load weight: 29,965 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space volume: 30 m³, total width: 2,550 mm, total height: 3,800 mm, Year of construction: 2025, Equipment: ABS, Brand new FD-Tec 3-axle tank semi-trailer * SV2011-22-R300 (Tank volume: 30 m³, material thickness: 3 mm stainless steel, temperature range: 0–60°C.) * Former designation SV2006 Basic / Now SV2011 * 8" manual docking funnel * 6" gravity discharge connection * 4" manual cleaning line with 2 x 2.5" nozzles (1 at the front and 1 in the center of the tank) * ABS braking system by Wabco, no electronic air suspension * 9-ton VALX axles, Ø430 disc brake, ET120 * Automatic lift axle on the first axle * Raising/lowering via control from the EBS modulator * Start-up assistance: 2nd and 3rd axles can be loaded up to 130% under 30 km/h * Third axle is a self-steering axle * Apollo Vredestein 385/65R22.5 tires Lsdpfxswwn Abe Akyshh * 24-volt lighting system: 2 x LED work lights at the rear, 1 x on the left side * Work lights left and right by the first axle * Standard 15-pin connection + 2 x 7-pin connectors * Flashing side marker lights * Ball valve for drainage at the lowest point of the tank * Vogelsang pump, 6,000 L/min (Pump manufacturer recommends a leakage oil return line) * Automatic pump shut-off * 2 wheel chocks * Left and right (narrow and tall) galvanized steel hose trays, each 5 m (250 mm wide, 190 mm high) * Tension cables above the hose trays * Tire pressure monitoring system, air suspension with lift/lower valve, rotary slide valve * Tank painted with two coats of paint – Category A (without clear coat) * Tank painted in a single color RAL 7030, STONE GREY * Chassis painted in a single color RAL 7016, ANTHRACITE GREY * ...

Condition: used, axle configuration: 3 axles, first registration: 06/2008, total length: 9,480 mm, total width: 2,470 mm, suspension: air, tire size: 385/65 R 22.5, wheelbase: 7,330 mm, Year of construction: 2008, Equipment: ABS, = Additional options and equipment = - Air suspension = Further information = Axle configuration Tyre size: 385/65 R 22.5 Axle brand: SAF Lhodpfx Asy Rt Ipokysh Brakes: Drum brakes Suspension: Air suspension Rear axle 1: tread left: 25%; tread right: 25% Rear axle 2: tread left: 25%; tread right: 25% Rear axle 3: tread left: 25%; tread right: 25% Weights Unladen weight: 5,300 kg Payload: 37,700 kg Gross vehicle weight: 43,000 kg Condition Damages: none Identification Registration number: OK-95-KH

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 10/2003, total width: 2,470 mm, suspension: air, tire size: 385/65R22.5, Year of construction: 2003, Equipment: ABS, = Additional options and equipment = - EBS - Toolbox = Further information = Axle configuration Tyre size: 385/65R22.5 Axle manufacturer: BPW Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Lift axle; Max. axle load: 9,000 kg Rear axle 2: Max. axle load: 9,000 kg Rear axle 3: Max. axle load: 9,000 kg Ledpfxeyxlwls Akyehh Weights Kerb weight: 5,300 kg Payload: 37,700 kg Gross vehicle weight: 43,000 kg Identification Registration number: OH-08-HS

Year of construction: 2015, condition: excellent (used), Manufacturer: S+S Separation and Sorting Technology GmbH Type: Unicon-D 2000/400/450/100 Year: 2015 Electrical data: -230 V Lhedpfxek Eakvs Akyoh -0,7 A -50 Hz -IP 65

Condition: excellent (used), Year of construction: 2015, Manufacturer: S+S Separation and Sorting Technology GmbH Type: Unicon-D 2000/400/450/100 Year: 2015 Electrical data: - 230 V - 0,7A - 50 Hz - IP 65 Ljdpfxjlatz De Akyjhh Inclusion dimensions: 2060 x 650 x 1260 mm Belt width: 390 mm Belt length: 2000 mm

Condition: new, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 04/2026, total width: 2,470 mm, total height: 1,350 mm, suspension: air, tire size: 385/65R22.5, color: black, Year of construction: 2026, Axle configuration Tyre size: 385/65R22.5 Make axles: VALX Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Weights Empty weight: 4.855 kg Carrying capacity: 39.145 kg GVW: 44.000 kg Maintenance APK (MOT): tested until 04/2027 Condition General condition: very good Technical condition: very good Visual appearance: very good Identification Registration number: OX-80-FD Additional information Please contact Arie or Pedro for more information = Additional options and accessories = - Air suspension - Disc brakes - EBS - Extandable - Lift axle - Twist-locks Lsdpfx Akjy Ec A Eoyehh

Condition: like new (used), Year of construction: 2014, Complete Bottle Filling Line for non-aseptic milk and other dairy product Capability 270, 540 ml PET/Plastic bottles with the cap D- 38 mm Bottle size: 270mm: D-60mm, H-132mm 540mm: D-70mm, H-180mm Capacity: 270mm: 2500 bottles per hour 540mm: 2000 bottles per hour Made by SELO, Netherlands. YOM 2014 Consisting of: 1. 2x Accumulation Tables 150 cm diameter Motorised 2. Rotary Bottle Washer Lhsdeyiptqspfx Akyjh 15 bottle capacity Siemens Logo TD touch screen With Associated Conveyor 3. Selo 6 Head Filling Machine 6 head fully automated filling station With Selo pressure tank Schneider touch screen control Pump and associated pipework 4. Capper Rotary 3 Head fully automated bottle capper with Mobile Cap Hopper/ Swan Neck cap Feeder 5. Albertina/Etipak In Line Labeller 6. Associated conveyors AS NEW CONDITION

Condition: good (used), axle configuration: > 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 07/2017, total width: 2,470 mm, total height: 1,540 mm, suspension: air, tire size: 385/65R22.5, color: blue, Year of construction: 2017, Axle configuration Tyre size: 385/65R22.5 Make axles: BPW Brakes: drum brakes Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Rear axle 4: Max. axle load: 9000 kg Weights Lodpsy Dcbfefx Akyohh Empty weight: 6.358 kg Carrying capacity: 37.642 kg GVW: 44.000 kg Condition Technical condition: good Visual appearance: good Identification Registration number: OV-84-VK = Additional options and accessories = - Air suspension - EBS - Extandable - Lift axle - Twist-locks

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 03/2013, total width: 2,470 mm, total height: 1,520 mm, color: black, Year of construction: 2013, Equipment: ABS, = Additional options and accessories = - EBS Lhsdpfxsx T Di No Akyoh - Lift axle - Air suspension - Disc brakes = Remarks = Nice 2013 D-TEC FLEXITRAILER 45FT High Cube swap body chassis with SAF axles, equipped with disc brakes, ABS/EBS, first axle = lift axle, extendable in 2 positions (middle and rear) + fixed front, suitable for 1x20FT, 2x20FT, 1x20FT middle, 1x30FT, 1x40FT, 1x40FT HC, 1x45FT HC containers. Unladen weight: 5,140 kg; Gross vehicle weight: 43,000 kg; tyres: 385/65-R22.5 (R: 6/4/4 mm; R: 6/6/5 mm). Dutch registration with valid MOT (APK) until 26.10.2026. 2 units available. = Further information = Axle configuration Rear axle 1: Lift axle; Max. axle load: 9,000 kg Rear axle 2: Max. axle load: 9,000 kg Rear axle 3: Max. axle load: 9,000 kg Weights Unladen weight: 5,070 kg Payload: 37,930 kg Gross vehicle weight: 43,000 kg Functional Body brand: D-TEC FLEXITRAILER Extendable chassis: Yes Maintenance, history and condition MOT (Technical inspection): valid until 10/2026 Technical condition: very good Visual condition: very good Identification Registration number: OX-40-BN Further information Contact Arne Honingh for more information.

Condition: excellent (used), axle configuration: 3 axles, first registration: 04/2021, suspension: air, color: black, Year of construction: 2021, Make axles: SAF Empty weight: 3.216 kg Carrying capacity: 40.784 kg GVW: 44.000 kg Technical condition: very good Visual appearance: very good = Additional options and accessories = Lhedpfx Akjxu Ddgsyeh - ADR - Air suspension - Disc brakes - EBS - Lift axle

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: COMBO (Plasma, Drilling, OXY-Fuel, Bevel), Equipment: CE marking, documentation/manual, * COMBO offers customers the most innovative technological solutions and features a wide range of models. * It is a highly advanced machine equipped with a 6- and 12-station automatic tool changer ISO 40 drilling system, offering capabilities such as drilling, tapping, countersinking, plasma cutting, OXY cutting, and ±45° bevel cutting. * The COMBO has a working range from 1,500 mm x 3,000 mm up to 4,000 mm x 24,000 mm and can be equipped with high-capacity plasma power sources. Lhodpfx Aoyy Rn Sjkysh * Plasma Cutting * Drilling * Tapping * Countersinking * OXY-Fuel Cutting * Fully welded, heavy-duty machine frame. * High-durability cutting table designed for easy replacement. * Dual drive system with linear rails, rack and pinion. * Compliance with CE standards. ISO 40 Drilling System * 6-station automatic tool changer (optional 12-station). * CNC-controlled automatic coolant spraying system during cutting. * 26 kW spindle motor power. * Drilling capacity: Ø M5 to Ø M40 (HSS, UDRILL). * Drilling depth: 100 mm * Drilling speed: 0.15 – 0.35 mm/rev. * Spindle speed: 1,500 rpm * Hypertherm / Thermal Dynamics power sources. * Hypertherm / Eurosoft CNC controls. * Possibility to import .dxf and .dwg files via Pronest / Cut-Expert CAD-CAM.

Condition: new, functionality: fully functional, Year of construction: 2026, Lintec 40-ton mobile asphalt mixing plant Condition: New Ljdpfxeylqc So Akyshh Capacity: 40 t/h Warranty: 1 year

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Polen 1055 € 12 mm 19 mm Weldon 1.1 kW 400 mm 126 mm 185 mm 10 kg 12 mm 40 mm 40 mm 45 mm 370 U/min 6 mm PRO-40 AD is a low profile mag drill, that fits in the tightest of spots. Perfect solution for any applications in confined spaces, wheretypical mag drills are too large. Its powerful motor enables drilling of holes up to 40 mm (1-9/16”) in diameter and up to 40 mm (1-9/16”) deep. An innovativeultra-strong magnetic base with high performance on air gaps makes it possible to work even on painted, rusted or thin surfaces. Magnetic Power Adhesion Control (MPAC) protects both the drill and the operator from working on too thin or inadequate surfaces, preventing the motor from engaging if the adhesive force is dangerously low. PRO-40 AD accepts both TCT and HSS cutters as well as twist drill drills with 19,05 mm (3/4”) Weldon shank. Lhjdpfxsyrhp Ao Akysh Features&benefits: • Low profile mag drill of 185 mm height only • Ultra-strong magnetic base with 1009 kgf (9900 N) holding force • Compact and lightweight design of just 10 kg • Milling capacity up to 40 mm with annular cutters • Accepts also twist drills with 19,05 mm (3/4”) Weldon shank • Extended stroke of 45 mm allows up to 40mm depth of cut • Magnetic Field Shape Control (MFSC) provides maximum holding power on thin materials • Integrated swarf guard • Detachable feed lever (feat. ratchet) can be fixed from either side • Lifting handle for easy transportation • Cooling with a bottle Standard set includes: • Drilling machine • Plastic box • Handle • Pilot pin 6.34 x 102 mm for HSS cutters • Pilot pin 7.98 x 103 mm for TCT cutters • Safety strap • Hex wrench 4 mm • Operator’s Manual OPTIONS (PRICES ON REQUEST): Cutter extension Coolant bottle with nozzle 250ml

Condition: reconditioned (used), travel distance X-axis: 310 mm, travel distance Y-axis: 294 mm, travel distance Z-axis: 210 mm, overall weight: 3,000 kg, spindle speed (max.): 50,000 rpm, Used HSC machine RXP400DS/ RXD5 -overhauled- The machine is completely overhauled, tested and measured in our company. The machine again meets the new machine tolerance! Working area: - X-axis: 200 mm - Y-axis: 294 mm - Z-axis: 200 mm - Drives of the linear axes: Linear motors in all axes. - Drives of the rotary axes: Highly dynamic direct drives with integrated cooling. - Feed rates 0 - 40,000 mm/min in all linear axes. Lhsdpfx Aslzhhcjkyjh - Network connection: - Tool measuring laser: Diameter and contour measurement, wear monitoring and breakage control of the milling tools. - Chuck control, 1st chuck - Emulsion cooling with mechanical oil mist extraction -RMS Main Job Manager - Spindle max. 60,000 rpm HSK 25 - Tool changer 12-way row, optional tool changer conversion to chain - High-precision option - Remote maintenance via Teamviewer - Transport dimensions of machine: W 2,425 x L 1,925 x H 2,140 mm - Weight: Approx. 3,000 kg A viewing of the machine in operational condition is possible at any time. You are also welcome to find out more about the type and scope of our overhauled machines on our website or on our Hüttmann YouTube channel.