Used Decoiler,Sheet Metal Decoiler, Gsw for sale (36,660)

Condition: new, functionality: fully functional, working width: 1,500 mm, feed rate X-axis: 4 m/min, type of input current: three-phase, sheet thickness (max.): 102 mm, total length: 2,300 mm, total width: 2,600 mm, total height: 2,500 mm, overall weight: 4,000 kg, working height: 950 mm, workpiece length (max.): 102 mm, Deburring on both sides in just one pass - of course with 100% reproducible results and precise processing of the inside and outside edges - only the EdgeRacer 1500 D offers you this. The double-sided deburring EdgeRacer 1500 D is the right choice for precise double-sided deburring and edge rounding. In addition to flat sheets, it can also process sheets with beads, notches, thread pull-throughs and the like. The maximum component height is 102 mm. The infeed of the brushes working from above and below can be set independently of each other. Thanks to the roller conveyor, the infeed can also be below or above roller table level. Bsdpsucw Rbsfx Aphodf

Condition: like new (used), Year of construction: 2023, operating hours: 1 h, actuation type: manual, working width: 2,030 mm, back gauge: 750 mm, Equipment: documentation/manual, type plate available, Panel shear, like new, unused. The machine was delivered by Schröder in January 2023 and put into operation. Since it was unsuitable for the intended application (see photos), it was subsequently stored and is in absolutely new condition. The new price was €12,381 (excluding transport + assembly). Manufacturer: SCHRÖDER Type: HS 2000 x 1.25 Year of manufacture: 2023 Usable length: 2,030 mm Bdsdpfxszl A Rae Aphsf Cutting capacity at 400 N/mm2: 1.25 mm Equipment: - Rear stop 750 mm, digital display, adjustable at the front - Hold-down device 750 mm - Stainless steel blade - Clamping beam with hard rubber strip - Front support table, extendable - Angle stop right + left - Sliding carriage

Condition: used, Max. cutting length: 2540 mm Bedpfx Aezl Dr Sophsdf Max. sheet thickness: 6 mm steel Mechanically adjustable rear stop (2 speeds) up to 1000 mm with analog display Side stops and table extensions cutting length limitation Cutting edge lighting knife sharpened Weight approx. 5500 kg

Condition: used, functionality: fully functional, Year of construction: 2002, controller manufacturer: RAS, controller model: Touch&More System 6000, working width: 3,200 mm, sheet thickness (max.): 2 mm, back gauge: 1,550 mm, input voltage: 400 V, year of last overhaul: 2025, Equipment: CE marking, emergency stop, foot remote control, We are offering this used RAS TurboBend plus 62.30 swiveling bending machine, manufactured in 2002, for sale. RAS turboBend plus 62.30 Year of manufacture: 2002 Bending length max. 3200 Bodpfx Aszlyx Ijphsdf Back gauge depth max. 1550 Sheet thickness max. 2.0 Touch&More System 6000 (refurbished in 2025) USB stick, no longer with a 3.5-inch drive It functions perfectly. All maintenance has been carried out by us. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, Year of construction: 1992, control type: manual, degree of automation: manual, actuation type: hydraulic, controller manufacturer: Jorns, controller model: OP, working width: 6,000 mm, bending angle (max.): 145 °, number of axes: 5, sheet thickness (max.): 1 mm, sheet thickness steel (max.): 1 mm, total length: 6,800 mm, total width: 1,650 mm, Equipment: emergency stop, foot remote control, We are offering this used Jorns NL125-SM-OP-6 swiveling bending machine, manufactured in 1992. Manufacturer: Jorns Model: NL125-SM-OP-6 Year of manufacture: 1992 Condition: used Machine type: Swiveling bending machine Bsdpfozmy Eqex Aphjdf If you have any questions or require further information, please feel free to send us a message or call us.

Condition: ready for operation (used), You are bidding on a press brake from the well-known German manufacturer, Biegemaster. Features of the machine: Bending length: slightly over 4m Sheet metal thickness (steel): 2mm Adjustable bending angle (see picture) Bdedpfx Apozcw Ucjhsf Emergency stop Sheet metal support Control panel operation An advantage of this design is that sheets that have already been bent can also be bent again on the side. Free loading is possible. For approximately €2,000, I can arrange for a slitting shear to be included. You will receive an invoice in accordance with §25 a UStG. I can arrange transport with a shipping company if desired. Free loading as shown in the pictures. Inspection and testing are possible after arranging an appointment by phone. Payment in cash upon collection. If there is anything else I can do for you, please call me briefly. Thank you. Collection should take place within 8 days after the end of the auction. Location: 97249 Eisingen (3 minutes from the highway) Article number

Condition: good (used), Year of construction: 2015, operating hours: 2,265 h, functionality: fully functional, machine/vehicle number: SN004805, Manufacturer: LISSMAC Maschinenbau GmbH Model: SBM-L 1500 G1S2 2,265 operating hours Machine type: Deburring and edge rounding machine Bjdszltu Nepfx Aphsdf Working width: 1,500 mm / 2 driven tables Processing: Both sides in a single pass Year of manufacture: 2015 Without dust extraction The machine is being sold due to a plant upgrade. Immediately available Inspection possible at any time by arrangement.

Condition: good (used), Year of construction: 2016, operating hours: 715 h, functionality: fully functional, machine/vehicle number: 2530-01, working width: 900 mm, Due to machine rejuvenation, we would like to sell our barely used Timesavers wet deburring machine. The machine is available for inspection and testing; it is live. Bedpfxev Tnfis Aphodf Please contact us with any questions.

Condition: used, 3 transmitter elements (clear width approx. 400 mm) 4,000 mm long, 1,700 mm high Warehouse location: Bodpoymp Rwefx Aphodf

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, control type: CNC control, degree of automation: automatic, actuation type: electric, working width: 3,100 mm, sheet thickness (max.): 2 mm, sheet thickness steel (max.): 2 mm, back gauge: 1,000 mm, overall weight: 3,685 kg, input voltage: 380 V, We are offering this very well-maintained CIDAN Machinery K25 30 swivel bending machine, manufactured in 2016. The machine is fully functional and features a rotating upper beam with a gooseneck rail. The bending beam has a bending beam crowning feature. The machine is located in 83083 Riedering and will be available from August. Loading, including worldwide transport, is possible. I would be happy to send you a video of the machine via WhatsApp. Machine type: K25 30 Capacity: 3100 × 2.0 mm Serial number: 59816-10 Date of manufacture: 2016-02 Bdsdpfxszmp Tws Aphof Weight: 3685 kg If you have any questions or require further information, please send us a message or call us at

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, STC-Ref:G-022-7715 Heidelberg Plattenabkante // Platebender, Year: 2008 equipped: Bsdpfx Apezcuzyjhsdf - suitable for Heidelberg SM / CD - Plate bender --> available: immediately, in stock

Condition: used, Wide belt sander used Make:TimeSaver Series WRB Machine-No. 2480-19 Dry processing deburring/rounding machine machine with contact rollers and a rotating brush unit Max. Working width 1350 mm Sanding belt dimensions WxL 1350x1900 mm Outer brush diameter 530x350 mm Table opening 0.8-100 mm Min. part size 50x50 mm Brush speed 6-17 m/sec. Sanding belt speed 11 m/sec Feed speed 0.2-8 mm Power consumption W 1 unit - 11.0 kW RB unit 1.5 kW Brushes 4x1.5 kW Connection: 400 V 50 Hz Compressed air required 6 bar Total consumption 25 ltr/min. incl. ceramic brush set R plus 350x530 mm and zirconium brush set grain 180 Machine has been completely overhauled New transport mat installed Area of application: Sanding belt rolling unit W: Pre-deburring with sanding belt or Scotch- Bride belt Removal of raised burrs Apply a sanding finish or brush finish, Repair a sanding finish or brush finish RB unit: Deburring and rounding of flat and profiled and profiled parts Bdjdsudb R Ispfx Aphof Weight: 6200 kg

Condition: used, Year of construction: 1980, number of straightening rollers: 16, working width: 1,250 mm, sheet thickness (max.): 12 mm, overall weight: 24,825 kg, Manufactured by BLEMA GOTHA (Germany) Max sheet thickness, mm 12,5 Max sheet width, mm 1250 Bodpezap Rwjfx Aphsdf Number of straightening rollers: 16 Straightening speed, m/min 16 Motor capacity, kW 54 Machine weight, kg 24825 Sheet leveling machine BLEMA GOTHA UBR 12,5 x 1250 / 1-16 The WMW UBR 12.5 x 1250/1-16 is an industrial multi-roller sheet straightening machine. Machine is complete and could be prepared for immediate shipment.

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, Schröder Powerbend Universal Swivel Bending Machine 2000 x 4 mm Manufacturer: Schröder Group Type: Powerbend Universal 2000 x 4 mm Year of manufacture: 2019 Bdodpfx Aozlx Izjphjf Condition: used, like new Further information available upon request.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 13707, working width: 6,200 mm, sheet thickness (max.): 6 mm, power: 11 kW (14.96 HP), overall weight: 17,500 kg, throat depth: 60 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. sheet thickness: 6 mm Max. working width: 6,200 mm Overhang: 60 mm Back gauge depth: 1,000 mm MACHINE DETAILS Bdjdpjzk Dzdefx Aphsf Power: 11.0 kW Control system: Conventional Control system manufacturer: Elgo Drive type: Hydraulic Dimensions & Weight Overall length: 6,400 mm Weight: 17,500 kg EQUIPMENT Documentation Sheet support system: Pneumatic Angle adjustment: Motorized Back gauge type: Electric

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, working width: 550 mm, power: 32 kW (43.51 HP), empty load weight: 3,000 kg, Equipment: CE marking, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum working width: 550 mm MACHINE DETAILS Bsdpfx Aozk Dyyophedf Power: 32 kW Dimensions & Weight Dimensions (L x W x H): 1,700 x 2,700 x 2,900 mm Empty weight: 3,000 kg Control: Conventional Wet/Dry: Dry EQUIPMENT Station type 1: Belt sander CE marking

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2003, machine/vehicle number: 301/430-1987, control type: manual, degree of automation: semi-automatic, actuation type: electric, sheet thickness (max.): 15 mm, overall weight: 2,300 kg, total length: 7,400 mm, total width: 1,840 mm, total height: 1,950 mm, input voltage: 230 V, input frequency: 50 Hz, type of input current: DC, Biegemaster BMTH 6.1,25 folding machine, refurbished by the manufacturer. Technical data: Working length: 6020 mm Bending capacity for steel 400 N/mm²: 1.25 mm Bending capacity for aluminium 190 N/mm²: 1.50 mm We are selling it solely due to the purchase of a new machine; this unit has worked flawlessly and can earn for its new owner for many years to come. The machine has been refurbished by the manufacturer and is in very good technical condition. Robust, stable construction, with no play affecting the bending quality. Bedsy Rk Rhepfx Aphedf Please contact us for more details. Sale with full VAT invoice; the price in the advertisement is net.

Condition: excellent (used), functionality: fully functional, actuation type: electric, working width: 10,000 mm, bending angle (max.): 140 °, overall weight: 5,000 kg, total length: 11,000 mm, input voltage: 400 V, input current: 32 A, Equipment: emergency stop, foot remote control, FOR SALE: Jorns Norma Line 125 SM CNC 400-10 – Heavy-Duty 10-Meter Press Brake with Sheet Cutter Are you looking to upgrade your sheet metal workshop with serious capacity? Up for sale is a rare, high-capacity, Swiss-made Jorns Norma Line 125 SM CNC bending machine, boasting an impressive 10-meter bending length. In the sheet metal industry, Jorns is widely recognized as the gold standard for durability and precision. This unit was manufactured in 1989but has been operative for which is exceptionally low for a commercial machine of this caliber. It has primarily been used for light work with galvanized steel, meaning the mechanical components are in great condition. Additionally, the machine comes equipped with an integrated sheet cutting knife for quick, clean, and straight cuts directly on the machine. Key Highlights: Massive 10-Meter Bending Length – Allows you to bend long roof, ridge, and facade flashings in a single piece without joints. Exceptionally Low Hours – With only 6,000 operational hours, this machine has plenty of life left for decades to come. Premium Swiss Engineering –Extremely rigid and precise frame with a solid machine weight --- ### Technical Specifications: Brand: Jorns (Switzerland) Model:Norma Line 125 SM CNC 400-10 Year of Manufacture: 1989 Max. Bending Angle: 140° Bending Length:10,020 mm Dimensions & Weight: Machine Depth:1,700 mm Machine Height:1,870 mm Machine Weight: Approx 6000 kg Additional Equipment: Bdjdpezlkq Isfx Aphof Programmable Jorns CNC 400 Control unit Integrated rotary knife for sheet metal cutting Foot pedal control

Condition: good (used), Year of construction: 1969, number of straightening rollers: 7, working width: 2,500 mm, sheet thickness (max.): 39 mm, max. sheet width: 2500 mm Convexity length of rollers: 2700 mm max. sheet thickness (St 50): 32 mm max. sheet thickness (St 34): 39 mm min. sheet thickness (St 50): 8 mm number of straightening rollers: 7 rollers number of driven straightening rollers: 5 rollers diameter of straightening rollers: 290 mm diameter of input/output straightening rollers: 345 mm number of support rollers: 13 diameter of support rollers: 288 mm stroke of upper beam: 120 mm Straightening speed: 16 m / min Rated power of main drive: 90 kW Total load: 138 kW Bdjdpfx Aozly Rqjphof

Condition: good (used), Year of construction: 1982, number of straightening rollers: 13, sheet thickness (max.): 10 mm, Year of construction / YOM: 1982/2024 Sheet width: 2000 mm Sheet thickness - max.: 10 mm Sheet thickness - min.: 3 mm Number of straightening rollers: 13 rollers Straightening roller diameter: 145 mm Straightening speed: 16 m/min Bundle length: 2330 mm Center distance between straightening rollers: 150 mm Support roller diameter: 290 mm Main drive motor: 30 kW Weight: 32 t Additional information: - Number of support rollers: 21/24 - Number of supports (top/bottom): 3 /3 - Traverse lift speed: 0.71 mm/sec - Traverse lift stroke: -18 mm to +42 mm Bdsdpfxozly Nmo Aphef - Max. tilting of lower traverse: 8 mm

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, control type: CNC control, degree of automation: automatic, Description: For sale is a state-of-the-art JORNS JDB-200G double bending machine with extensive special equipment. The machine was developed for the economical production of complex edge profiles and enables the automatic bending of sheet metal parts without manually turning the workpiece. This reduces setup times and significantly increases productivity. The combination of the powerful CP300Twin control, Dynamic Positioning (DP), servo-hydraulic DSP drive, RH hydraulic system, automatic back gauge, and integrated SL3 shear makes this system the ideal solution for demanding applications in industrial sheet metal processing. The JDB series impresses with its high precision, short cycle times, and intuitive graphical programming. Automatic clamping fingers, servo technology, and the generous "G" tool geometry enable even complex bending profiles with maximum efficiency. Technical data: Manufacturer: JORNS Model: JDB-200G-RH-DP-SL3-1250-CP300Twin-6.4-DSP Machine type: CNC double bending machine Control: JORNS CP300 Twin Tool geometry: G geometry Material thickness adjustment: RH hydraulic Dynamic Positioning (DP) Double servo-hydraulic system (DSP) Integrated shear SL3 Automatic clamping fingers Automatic material feed Automatic loading and unloading system CNC-controlled back gauge High positioning and repeat accuracy Equipment: CP300 Twin graphic control RH hydraulic material thickness adjustment DP Dynamic Positioning DSP double servo pump system SL3 high-speed shear Automatic material feed Automatic clamping fingers Vacuum gripper system Servo-driven axes Hydraulic cooling LED operating status display Extensive safety equipment Application areas: Facade construction Roof and wall profiles Ventilation and air conditioning technology Metal and hall construction Housing and switch cabinet construction Sheet metal processing Industrial series production Condition: Used Technically functional Inspection under power is possible by appointment. Maintenance and service documents available upon request. Scope of delivery: JORNS JDB-200G double bending machine CP300 Twin control Existing tools Documentation Accessories as per inspection Advantages at a glance: Highest productivity thanks to double bending technology No need to turn the workpieces Very short setup times Graphical CNC programming Precise production of complex profiles Automated material flow Robust Swiss industrial quality Ideal for series and small series production Location: Riesa, Germany Inspection / Loading: An inspection of the machine under power is possible at any time by prior appointment. If desired, we can assist with: Dismantling Bsdpfxozl Anlj Aphedf Loading Transport organization within Germany and Europe Commissioning by arrangement Errors, changes and prior sale reserved.

Condition: excellent (used), Year of construction: 2013, Year of manufacture: 2013 Bdedpey Tu Dksfx Aphef Series 2200

Condition: used, Year of construction: 2003, total width: 2,700 mm, total height: 2,900 mm, total length: 1,700 mm, Colour: White Empty weight: 3.000 kg - Year: 2003 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 0312101 - Drive system: Conventional - Wet/dry: Dry - Number of stations [pcs]: 1 - └ Station type 1: Abrasive belt Bjdozkkd Sjpfx Aphjdf - Power [kW]: 32 - Max. working width [mm]: 550 - Transport dimensions: 1700mm x 2700mm x 2900mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2009, functionality: fully functional, working width 1100 mm 3 internal operator groups 1 external operator group belt cooling via liquid Bdjdpfeznm S Tsx Aphsf

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: 84659300, Machine consists of 3 working units: Bdedpfexn Ifusx Aphef 1st. XSV Brushes (12 rotating and oscillating brushes) 2nd XSV Brushes (12 rotating and oscillating brushes) 3rd Roller brush Feeding belt 1350 mm.