Used Dn Solutions Svm 4100 for sale (6,787)

Condition: excellent (used), Year of construction: 2022, operating hours: 7,800 h, functionality: fully functional, machine/vehicle number: Puma 2600, turning diameter over cross slide: 630 mm, turning length: 1,245 mm, turning diameter: 376 mm, spindle bore: 102 mm, spindle speed (max.): 2,800 rpm, spindle motor power: 26 W, type of input current: three-phase, controller manufacturer: FANUC, number of spindles: 2, operating hours of spindle: 7,800 h, number of slots in tool magazine: 12, Equipment: chip conveyor, For sale: Turning center with sub-spindle and Y-axis. Machine in perfect condition. Purchased new in mid-2023. Currently in operation, with less than 8,000 operating hours; parts produced well below its technical capacity. Serviced exclusively by an authorized distributor. Adapted for robot operation: equipped with autodoor and external communication signals. Features include parts conveyor and oil mist filter. NOTE: The robot is not included in this offer – separate sale and integration support can be offered upon individual quotation. TECHNICAL DATA according to manufacturer’s specification: 1) Capacity Swing over bed: 680 mm Pgsdjx Rqkuepfx Ahzer Swing over cross slide: 630 mm Max. turning diameter: 376 mm Recommended turning diameter: 315 mm Max. turning length: 1245 mm Max. workpiece weight (incl. chuck): In chuck: 500 kg (with support: 1000 kg) Bar capacity in spindle: 102 mm 2) Main Spindle Chuck: 315 mm Spindle nose: A2#11 ASA Front spindle bearing diameter: 160 mm Spindle bore: 115 mm Chuck through hole: 103 mm Spindle motor power (S3-25%/S6-60%/S1 Continuous): 26/22/18.5 kW Spindle speed range: 2 - 800 rpm Max. spindle torque (S3-15%): 1123 Nm Power transmission: Belt 3) Sub-Spindle Chuck: 175 mm (optionally 210 mm) Spindle nose: A2#5 ASA Spindle bore (diameter): 62 mm Sub-spindle cylinder bore: 50 mm (H8) Spindle motor power (continuous/30 min): 7.5/5.5 kW Sub-spindle speed range: 4,500 rpm Max. spindle torque (30 min): 85 Nm Power transmission: Belt 4) Axis Travel X axis: 260 mm Z axis: 1350 mm Y axis: 105 (±52.5) mm B axis: 1350 mm C axis (1, 2): 360° (0.001° increments) Rapid traverse: X axis: 30 m/min Z axis: 30 m/min Y axis: 10 m/min B axis: 30 m/min C axis: 200 rpm 5) Bed and Saddle Slant bed, tilt angle: 30° Bed guideway (Z axis): 437 mm Saddle (X/Y axis): 321/325 mm Sub-spindle stroke: 335 mm 6) Tooling System Tool holders: BMT 65P Number of tools: 12 Tool size: 25 x 25 mm Max. drill diameter: 50/32 mm (main/sub-spindle) Driven tool motor power (5 min/Cont): 7.5/1.5 kW Driven tool speed: 5,000 rpm Driven tool max. torque: 95.5 Nm Driven tool collets (ER32): Φ3–Φ20mm (option) Turret indexing time: Single position: 0.15 s (1.2 s full station) Max. driven tool drilling diameter: φ20 mm, M20 x P2.5 7) Hydraulic System Tank capacity: 20 l Flow rate (60/50 Hz): 25 / 20.8 l/min Power/Pressure: 2.2 kW x 5.0 MPa 8) Coolant Tank capacity: 250 l Flow rate: 30 l/min Power/Pressure: 0.7 kW x 0.15/0.1 MPa (60/50 Hz) 9) Machine Accuracy Positioning: 0.01 mm Repeatability: 0.02 mm C Axis Positioning: 0.0167° Linear repeatability (axes X/Z/Y): ±0.002/±0.003/±0.003 mm C Axis repeatability: ±0.006° 10) Control System Full electric control for X, Y, Z, C axes For further questions or additional information, please feel free to contact us by message or phone.

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, turning length: 300 mm, turning diameter: 300 mm, spindle bore: 52 mm, spindle speed (max.): 4,500 rpm, controller model: FANUC CNC, TECHNICAL DETAILS Max. turning diameter: 300 mm Max. turning length: 300 mm Spindle bore: 52 mm Main spindle speed: 4,500 rpm Tool turret: 12 stations Podpfxoyvfvuj Ahzjgr MACHINE DETAILS Machine weight: 2,200 kg EQUIPMENT Horizontal CNC lathe High-performance main spindle Robust machine construction for high dimensional accuracy Tool turret with fast indexing Compact design with a small footprint User-friendly CNC control High reliability and low maintenance Control: FANUC CNC

Condition: like new (used), functionality: fully functional, Year of construction: 2024, control type: CNC control, degree of automation: automatic, actuation type: electric, For sale: lightly used sheet metal rewinding machine SVM-100, designed for automatic rewinding of sheet metal from large coil rolls into smaller rolls of 25m2 (1250*20,000 mm). The machine was manufactured in 2024, has been used very little, is in excellent technical and visual condition, and is fully ready for operation. It is an excellent solution for companies that produce roofing materials or other sheet metal products supplied in rolls. The machine automatically: - Unwinds the sheet metal from the coil up to 1 ton. If you want to rewind from 2-5 ton coils, an automatic unwinding unit is required to feed the sheet metal. - Winds the sheet metal into a roll. - Cuts the sheet to a specified length. - Allows the roll to be wrapped with stretch film. - Applies protective film to the surface of the sheet metal. The machine is connected – it can be inspected and tested. Technical specifications: Manufacturer: Foldsolutions / UAB Pakservisas Model: SVM-100 Year of manufacture: 2024 Made in: Lithuania Operating parameters: Sheet metal width: 1230–1260 mm Sheet metal thickness: 0.4–0.6 mm Maximum roll length: 20 m Roll diameter: approx. 300 mm Equipment: Automatic sheet metal winding Sheet metal cutting to a specified length Pedpfxezibwgs Ahzegr Automatic roll packing process with stretch film Option to use protective film on the sheet metal Integrated length measuring encoder Touchscreen control panel Manual and automatic operating modes Pneumatic cutting system Adjustable operating speeds Length calibration function for precise production Emergency stop system Technical data: Electrical power: 400 V / 50 Hz / 3 phases Power: 2.6 kW Required compressed air pressure: 0.65 MPa Air consumption: 0.3 m³/min Dimensions (L × W × H): 2555 × 1730 × 1800 mm Weight: approx. 600 kg Application: Ideally suited for roofing materials, facade, sheet metal products, sheet metal processing companies, and other manufacturers who require fast, accurate, and safe preparation of sheet metal rolls for transport or storage. If you have any further questions, we will be happy to answer them.

Year of construction: 2023, condition: used, functionality: fully functional, THM Recycling Solutions Granulation System Plastics Shredder, Granulation and Washing System comprising THM Recycling Solutions granulation unit with: THM FR300/235/215-25-7500 inlet belt conveyor (2024) Pgsdozhudwepfx Ahzer THM ZM 1000 granulator (2023) THM FR300/235/215-25-7500 outlet belt conveyor (2024) HAG HA-SNP-P-20-14-0-7.5 hydraulic unit,12 bar Pierret guillotine cutting system with: Pierret G35RI guillotine cutting machine Pierret G28RI guillotine cutting machine 2x belt conveyors for infeed and outlet

Condition: used, Year of construction: 2017, functionality: fully functional, GF+ FORM 300 – EDM machine with WorkPartner 1+ automation For sale is a high-quality GF+ FORM 300 EDM machine with automated workpiece/electrode handling system WorkPartner 1+ automation, manufactured in 2017. The machine is from GF Machining Solutions (Georg Fischer) and is particularly suitable for the precise machining of demanding workpieces in the tool and die making industry. Machine features: • Manufacturer: GF Machining Solutions / GF+ • Type: FORM 300 • Automation: WorkPartner 1+ • Process: Ram EDM • Robust and precise design for professional production use • Automated loading through WorkPartner 1+ • Integrated machine control • Suitable for tool and die making, as well as demanding precision machining The depicted system is located in an industrial production environment and is in used condition, as shown in the pictures. The combination of GF+ FORM 300 and WorkPartner 1+ enables an efficient, automated production process and reduces manual intervention. This is particularly interesting for companies that want to expand their EDM capacity or implement an automated ram EDM solution. The machine can be inspected at any time, but it has already been dismantled and is no longer connected to the power grid. Therefore, a functional demonstration is not possible. Podpfxjztn Ade Ahzogr The pallets and electrode holders can be purchased separately. Important note: The operating hours will be provided later, but the machine has hardly been used. Price: on request Inspection: possible by appointment Sale is preferred to commercial enterprises. The machine is sold used. Sale excludes any warranty for defects. All information is provided to the best of our knowledge, but without guarantee. Errors, prior sales, and changes reserved.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, type of input current: three-phase, input voltage: 380 V, For sale are two flexographic printing units removed from an Autobox 2600+2x FelexoPrint+Multicut machine. The machine has a working width of 2600 and is from 2017. The printing units are practically unused and come with ceramic anilox rollers. Pgodpfezq Eg Uex Ahzor The maximum printing format is 1150 x 990 mm.

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: Drymex S 5, functionality: fully functional, operating hours: 8,286 h, Beautiful, robust, and excellently maintained drying system, consisting of 2 units, 1 large drying chamber made of stainless steel with a perforated sheet metal floor incl. piping and the Blue Evolution XL steam cleaning device from Beam. Ideal for gentle drying of food (herbs, tea, wheatgrass), low-temperature drying with electricity (below 40°C), for indoor use only. The individual segments of the perforated sheet metal floor can be opened individually (for cleaning). Pedpfsyffqqjx Ahzogr In top condition, very solidly built. Dimensions: Units - 1.95 x 1.25 x 2.00 m, Drying chamber: 7.40 x 2.67 x 2.50 m. Stainless steel: 1.4301 The entire system is very well maintained, still assembled, and fully operational. Can be inspected at any time while powered on. The drying chamber can also be divided and connected to one unit each. This will provide you with two identical dryers. Price negotiable.

Condition: new, Year of construction: 2025, functionality: fully functional, This UV printer replaces conventional laser printers – and enables color printing on glass, wood, textiles, plastics, metal, and many other materials. New model: PS1015 C M Y K LC LM + White Print head: Epson TX800 2690 dpi max. Includes software for printer control and image editing. Dimensions: 2.30 x 1.98 x 1.34 m Weight: 650 kg 360-degree printing: bottles/round objects (additional cost) A1+ size 100x150 cm and 70 mm printing height possible 7 x 500 ml ink can be supplied (additional cost) + VARNISH FUNCTION POSSIBLE Software settings and printer explanations available on request, throughout Germany/Europe (additional cost). Printing videos, etc. can be sent by email/WhatsApp. Pgodpsd Ew A Uefx Ahzsr

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 1013, REF: MM6216 1 X Comek vertical form, fill and seal bagging machine with Zodiac HS screen Technical specification ⚙️ ✅ Manufacturer - Comek Automatic Packaging Solutions ✅ Model - VPB 330 EVO. ✅ Date of manufacture - 2019. ✅ Weight - 2,500 Kg ✅ Installed power - 10 Kw ✅ Sealing jaws - 330mm (horizontal) x 460mm (vertical). ✅ Overall dimensions - 2000mm long x 1500mm wide x 1800mm high. Pgsdpfx Aoxd Ubnehzsr Note 🗒️ No printer.

Condition: like new (used), functionality: fully functional, Very good condition, the machines looks like new. Angle sealing machine and shrink tunnel Manufacturer: AVC Sealing Solutions Angle sealing machine, type HS-500 Sealing strip: 500 x 600 mm Machine dimensions: 1780 x 1020 x 1120 Shrink tunnel, Type 1000 Psdpfx Ahjzuv H Tozogr Tunnel opening: 440 x 300 mm Shrink length: 1000 mm Machine dimensions: 1800 x 1100 x 1600 Maximum heating power: 11 kW

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, 1 x Ilpra Packaging Solutions thermoformer fitted with Siemens S7 1200 PLC control panel and ILPRA thermo-transfer printer mod. I-PRINT (printing area 53 x 400mm). Supplied with 5 x sets of tooling. Manufacturer - ILPRA S.p.A. Model - Formpack F0 TMF Long Version. Date of manufacture - 2019. Pgjdpfowp Ac Hsx Ahzsr Can be used for flexible, semi-rigid and rigid film packs. Speed - Output with sizes 2.2 and 4.2: approx 4/5 cycles per minute, Output with size 2.1: approx 5/6 cyclese per minute. Film width - up to 420mm wide. Maximum diameter of forming film reel - 400mm. Reel core diameter - 76mm. Thickness - 500 microns. Maximum diameter of top web film reel - 250mm. Reel core diameter - 76mm. Type of useable sealing film - plastic, aluminium, medical paper, Tyvec. Electric supply - 400 V / 50 hz / 3 phase. Compressed air supply -7 bar. Vacuum pump - Busch. Tooling external dimensions (internal) - Set 1 - 2x1 format: 197.5mm (177.5mm) x 300mm (280mm). Set 2 - 4x2 format: 98.75mm (78.75mm) x 150mm (130mm). Set 3 - 2x2 format: 190mm x 150mm x (122mm diameter). Set 4&5 - 2x2 format: 197.5mm (177.5mm) x 150mm (130mm). Previously used for packing various meat products. Last run in May 2025.

Year of construction: 2017, condition: ready for operation (used), Granulator THM ZM 600 / MeWa UG 600 Drive power: 55 kW Rotor length: 600 mm Rotor diameter: approx. 480 mm Number of knives: 18 rotor knives and 3 stator knives Pgodpfx Aszhg Eyehzjr Rotor speed: The machine can operate at 4 different speeds if required: 257 rpm / 317 rpm / 343 rpm / 422 rpm. Weight: approx. 5500 kg Control cabinet brand new (original from THM recycling solutions GmbH) Hydr. feed pressure device (HNDE), feed hopper, Available from approximately the end of August.

Condition: defective spare-parts repository (used), SLM Solutions Type: SLM 280 HL For sale is a professional metal 3D printing system, type SLM 280 2.0, from SLM Solutions (Lübeck). The SLM is designed for 24/7 operation and was last used with titanium. Installation was in 2018. The system already has the sintering walls for gas flow. The system has been running on argon for the last 3 years. Approx. 50,000 laser hours. The 50,000 hours refer to the laser-on time; the exposure time is not recorded in the older 280 models. If I disregard the coating time, I estimate approximately 10,000 active laser hours. Last maintenance was at the beginning of 2026. Currently, occasional communication issues between the PC and the PLC are observed. In rare cases, this can lead to incorrect status messages, which can cause the system to be briefly interrupted during an ongoing job. Technical data (excerpt) Single laser 400W Weight: 1,245 kg Build volume: 280 × 280 × 365 mm Laser: 1 × 400 W fiber laser (IPG) Optics: 3D galvo system Focus diameter: 80 – 115 µm Pjdpfjzhlr Esx Ahzjgr Max. scanning speed: up to 10 m/s Layer thickness: 20 – 90 µm Minimum feature size: approx. 150 µm Build speed: up to approx. 113 cm³/h (material-dependent) Materials: Stainless steel, tool steel, titanium (Ti64), aluminum, Inconel, CoCr Inert gas: Argon Gas consumption process: approx. 2.5 – 8 l/min Gas consumption purging: approx. 70 – 110 l/min Compressed air: approx. 6 – 7 bar Electrical: 400 V, 3P+N+PE Fuse: 63 A Power consumption: approx. 3.5 – 5.5 kW Machine dimensions: approx. 2600 × 1200 × 2700 mm Weight: approx. 1300 kg (empty), up to approx. 1800 kg (including powder) Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of supply: (See picture) SLM 280 machine Control cabinet Process chamber Internal operating panel with screen (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, Year of construction: 2021, Technical details: voltage: 400/50 V/Hz air-pressure connection: - bar control: - capacity: 150 kg/h protection class: IP 20 Pgjdpfxjy N R Hme Ahzjr temperature range: 0 - 40 °C sound level:

Year of construction: 2016, condition: excellent (used), Type: ETS MPA409/M437A HP-3A For sale is a used vibration and shock testing system from the manufacturer ETS Solutions. Technical data: Vibration test system ETS MPA409/M437A Sine force approx. 39.2 kN Random force approx. 39.2 kN Shock force 6ms: approx. 78.4 kN Frequency range: DC-2,500 Hz Max. Displacement Continuous (deflection) 51 mm Max. Displacement at shock 51 mm Max. Vibration velocity (sine) 1.8 m/s Max. Acceleration (sine / random) 100/40 g Vibration exciter type M437A Diameter of vibration coil 370 mm Weight of vibration coil 34 kg Number of threaded inserts 16 stainless steel inserts Threaded inserts (standard) M10 Threaded inserts per bolt circle 8 at ∅ 150 mm Diameter of bolt circle 8 at ∅ 300 mm Resonant frequency of the armature without payload 2,250 (Hz ± 5%) Max. static payload weight 500 kg Axial frequency of the vibration isolation < 5 Hz Flux density < 1 mT Dimensions Length 1136 mm Width 860 mm Height 1118 mm Weight of vibration exciter 2470 kg Pgedpfozu Nxijx Ahzjr Amplifier MPA409 - Output power approx. 40 kW - Amplifier efficiency > 90% - Dimensions approx. (L x W x H in mm): 550x800x1850 - Weight approx. 620 kg HP-3A cooling air blower - Power consumption approx. 7.5 kW - Dimensions approx. (L x W x H in mm): 945x693x1466 - Weight approx. 175 kg Vibration controller DTC VENZO 880 - 2 to 8 analog input channels - 1 to 2 control channels (suitable for two-axis control applications) - 450 MHz DSP processing, 100 Mbit/s Ethernet interface for PC connection (without grounding problems) - Operating temperature range: -30 to 70 °C - Fanless design to reduce background noise - Anti-aliasing filter with 160 dB/octave slope - 1 AUX channel - 24-bit ADC/DAC, 135 dB dynamic range - 204.8 kHz sampling rate, 80 kHz frequency range - 1 GB internal flash memory for storing test configurations - Design with ground-isolated ground to avoid ground loop problems Scope of delivery: (See picture) Condition: Used Signs of wear and tear due to age and use Dirt, paint chips and traces of corrosion are present Optical condition according to pictures Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: excellent (used), Year of construction: 2022, overall weight: 790 kg, chuck outer diameter: 1,000 mm, bolt circle diameter: 145 mm, total height: 140 mm, total width: 1,000 mm, total length: 1,000 mm, Metal cutting Tooling TDG Solutions - PGI 1000 MACH-ID 9418 Make: TDG Solutions Psdpfxezcnm Ae Ahzogr Type: PGI 1000 Year: 2022 Diameter: 1000mm 4 chuck: Yes Spindle bore:145mm Max. speed: 611Rpm Length: 1000mm Width: 1000mm Height: 140mm Weight: 790kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, functionality: fully functional, machine/vehicle number: 3910010947, counter reading (black): 3,310,691, With this offer, you are purchasing a second-hand colour production system, the “Xerox Versant 4100 Press” Items for sale: 1 x Xerox Versant 4100 Press with the following specifications: incl. Paper Deck A-CF03/A-CF04 incl. Finisher A-GW04/A-GW07 Includes Stacker LCS-1 Includes SquareFold Not the right configuration? It’s no problem to configure the machine to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 9,571,697 pages Colour: Approx. 8,874,258 pages Black: Approx. 697,439 pages Condition: This is a second-hand machine, which may show signs of wear (minor scratches or yellowing). The machine has been tested for functionality A test print can be seen in the photo Packaging and dispatch: You are welcome to view the device during our opening hours. Please arrange an appointment to do so! Sea-worthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. Podpjzmpbnofx Ahzogr For further information, you are of course welcome to contact us directly.

Year of construction: 2012, condition: excellent (used), easyFrame is a semi-automated solution for canvas framing, by Imaging Solutions AG. It can process to 50 frames per hour (depending on the operator). Machine is exellent state. It has frame mounts to produce stretchers from 8x6 to 43x43 inches canvases. Pjdpfen Ut Hcex Ahzjgr

Condition: new, Year of construction: 2026, functionality: fully functional, Plastic processing line/installation or stand-alone machines for various applications. 1) Single-shaft shredder/mono-rotor shredder (various sizes), 18.5 kW or 30 kW 2) Conveyor belt with head pulley magnet or discharge screw, discharge height 2 meters 3) Grinding mill/crusher, 1000 series, 45 kW 4) Discharge system with silo/cyclone, blower, and big bag system/frame, and double outlet (stainless steel), outlet height 2.3 meters. In stock, viewing and testing possible by appointment. Machines and equipment can also be purchased separately. Call us or send an email. Pgedpjzv S Hrsfx Ahzor For information: Please include your first name, last name, company name, and valid phone number in all requests.

Year of construction: 2022, condition: ready for operation (used), Offered is an SLM280 2.0 Single 700W year 2022, approx. 5350h, SLM MCS control, build volume X/Y/Z: 280mm/280mm/365mm minus thickness of substrate plate, 3D optics configuration: Single single/double 400W/700W, Dual 400W/700W IPG fiber laser, build rate: 113cm³/h, layer thickness: 20μm-90μm, feature size: 150μm, beam focus diameter: 80μm-115μm, scan speed max.: 10m/s, inert gas consumption process: 5l/min (argon), inert gas consumption purging: 110l/min (argon). Accessories: chiller package HRS050 L/W, screening station PSM100 V3, handling device BPH280, bottle lift, material change kit. SLM280 2.0 complete incl. PSM100, powder containers, substrate plates (1.2709 & AlSi10Mg), additional filter housings, filter elements. Fully serviced annually by SLM Solutions (service reports available). Availability from 01.12.2025, machine dimensions X/Y/Z: 2600mm/1200mm/2700mm. Inspection possible by arrangement. Pgjdexy R Ezspfx Ahzjr

Condition: used, Year of construction: 2019, Manufacturer : Novexx Solutions Model TE 204 Year : 2019 Type : Tamper-evident labeller Type of products handled : Carton   Labelling head : ALS204 Dispensing speed : max. 40 m/min Label width: 10 -110 mm Label length: 5 to 600 mm   Supply voltage: 220V Motor power: 2.5 kW Technical documentation Dimensions : 2363 x 1455 x 1420 mm Pgjdeygndiopfx Ahzsr  

Condition: excellent (used), SLM Solutions SLM 500 HL Professional system for the additive manufacturing of metal components using selective laser melting. Suitable for industrial applications, prototype construction, toolmaking, aerospace, medical technology, and series production. Technical data Manufacturer: SLM Solutions Type: SLM 500 HL Year of manufacture: 2015 Build volume: 500 x 280 x 365 mm Laser configuration: Quad-fiber laser 4 x 400 W Max. build rate: up to 105 cm³/h Layer thickness: 20 µm to 75 µm Min. feature size: 150 µm Pgodpfxsza Ethj Ahzjr Beam focus diameter: 80 - 115 µm Max. scanning speed: 10 m/s Supply voltage: 400 V / 50 Hz, 3/N/PE Control voltage: 24 V DC Rated current: 36 A Heating power: 2.4 kW Protection class: IP50 Compressed air requirement: 50 l/min at 6 bar Special features Patented multi-beam technology Automatic powder management PSX sieving station PRS unpacking station Laser class 1 CE marking available Service / Operating history The system was used exclusively for processing aluminum from the beginning and operated under a nitrogen atmosphere. It operated reliably until decommissioning. During the last maintenance, the oxygen sensors, including the evaluation unit, were updated to the latest version. The system was then professionally decommissioned. Cooling unit Manufacturer: Riedel Type: WKS 101.2M5LE.I Year of manufacture: 2016 Refrigerant: R134a Filling quantity: 3.0 kg Operating pressure HD: 18.7 bar Protection class: IP54 Scope of delivery according to delivery note SLM 500 HL laser melting system, approx. 2680 kg Riedel cooling unit WKS101.2M5LE.I, approx. 200 kg SLM filter system, approx. 150 kg SLM unpacking station PRS 500, approx. 855 kg SLM sieving system PSX 500, approx. 690 kg Logitrans lifter LFSM 1002/1620, year of manufacture 2015, approx. 550 kg 2 x SLM build cylinders, each approx. 205 kg SLM spare parts / piping Dimensions / Weight Complete system according to manufacturer's specifications: approx. 5200 x 2800 x 2700 mm Weight according to manufacturer's specifications: approx. 3100 kg in operating condition approx. 2400 kg without powder Condition Used system from industrial application. The system has been dismantled and stored. Optical condition as shown in the pictures. Scope of delivery as shown in the pictures. Inspection and testing on-site are possible by arrangement and are highly recommended. Important note: All information is provided to the best of our knowledge based on available documents, software displays, manufacturer data, delivery note and nameplates. Deviations in technical data are possible. Shipping or freight forwarding is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Year of construction: 2021, condition: good (used), functionality: fully functional, machine/vehicle number: CD072150, Hosokawa Solids Container Scale BSG – Batch Discharge Scale – Year of Construction 2021 For sale is a Hosokawa Solids container scale, type BSG, for the precise gravimetric batch dosing of powders and bulk materials. The system was manufactured in 2021 and is in very good used condition. It consists of the container scale with discharge, a stainless steel filter housing with cartridge filters, a weighing system, an Endress+Hauser level sensor, and Nord geared motors. An operating manual is available. The control system and switch cabinet are not included in the scope of supply. Technical Data Manufacturer: Hosokawa Solids Solutions GmbH Type: BSG Container Scale (Batch Discharge Scale) Year of Construction: 2021 Container Volume: 30 dm³ Container Tare Weight: approx. 75 kg Max. Product Temperature: 50 °C Max. Total Weight: approx. 150 kg gross Pgjdpfx Ahozim D Sjzer The machine is suitable for the dosing of powders, granules, and other bulk materials in the plastics, chemical, food, and recycling industries. Inspection can be arranged at any time. Loading can be organized.

Year of construction: 2022, condition: used, functionality: fully functional, machine/vehicle number: SPE-Spero QTX-340, The device was used for research purposes. SPE-Spero QTX-340, MIR microscope with 'Hyper Spectral Imaging' capability. Spectral coverage of the fingerprint region (1900 - 950 1/cm). High-Resolution IR Objective: 12.5X; NA: 0.7, 650μm FOV. Enhanced LowMag Lens Visible: 4.0X; NA: 0.13, 650μm FOV. 480*480 pixels, Broadband Microbolometer Camera, Visible camera. QT-Laser-Performance-Package including high precision automated stage (< 1μm repeatability). High-speed data acquisition, joystick, control computer, Win10. 'Discrete Frequency IR Imaging' in real time. Transmission and reflection mode. 4000 hours laser active time. Pjdpfx Aey Dcd Hjhzogr

Year of construction: 2022, condition: used, functionality: fully functional, machine/vehicle number: SPE-Spero-LTX-340, The device was used for research purposes. SPE-Spero-LTX-340, MIR microscope with "Hyper Spectral Imaging" function; spectral coverage (1900 to 950 1/cm). Enhanced LowMag lens 4.0X; NA:0.3, 2.0mm FOV. Dedicated IR-transmission mode. Broadband 480*480 pixel microbolometer camera, including high-precision automated stage ( Podeyxc Twspfx Ahzjgr