Used Droop & Rein Fs130 for sale (318)

Condition: excellent (used), functionality: fully functional, total width: 1,315 mm, total height: 1,410 mm, total length: 2,030 mm, briquette diameter: 40 mm, oil tank capacity: 100 l, screw conveyor length: 1,595 mm, power: 4 kW (5.44 HP), year of last overhaul: 2025, filling opening width: 1,044 mm, Machine fully working , in very good condition.If you need any details please let us know. Pgsdpfx Agjx I Abae Djk

Year of construction: 2020, operating hours: 6,000 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: VF353, The "CeBeCo®" TROWAMAT® XL is suitable for cleaning wash items whose contaminants can be removed by spraying with detergent under pressure. The inserted basket, filled with wash items, is evenly passed by the nozzles positioned above and below, via a carousel wheel. Additionally, the wash items are sprayed by a nozzle system in the door and at the rear of the unit. Thanks to the high spray pressure and low rotation speed, a consistent cleaning result is achieved. TECHNICAL DATA Type: "CeBeCo®" TROWAMAT "XL" Size 40100/40 WST Drawing No. 3314-20 Tank: Approx. 3 mm thick stainless steel sheet 1.4301 Insulation: 25 mm mineral wool / Terodem Cladding: 1 mm galvanized steel sheet Usable dimensions: approx. 400 mm x 1,000 mm x 400 mm (height) Load capacity: max. 100 kg, with evenly distributed load Overall dimensions: approx. 2,700 mm x 1,825 mm x 2,530 mm (height) without roller conveyor Entry height: approx. 1240 mm Detergent: service water, aqueous, pH 7 - 11, max. +70°C, non-foaming, concentration max. 5% Detergent tank volume: approx. 460 L Psdpfeyr Dkcex Ag Dsgk Rinse agent: aqueous, pH 7 - 11, max. +70°C, non-foaming, concentration max. 5% Rinse agent tank volume: approx. 240 L The offer includes roller conveyor and washing baskets. For further information, please contact us.

Condition: used, Various micrometers from different manufacturers Pos1 Manufacturer: Tesa Measuring range: 0 – 25 mm Scale division: 0.01 mm Pos2 Manufacturer: Tesa Swiss Made Measuring range: 100 – 125 mm Scale division: 0.01 mm Pos3 Manufacturer: Unknown Measuring range: 25 – 50 mm Scale division: 0.01 mm Pos4 Manufacturer: Tesa Measuring range: 0 – 25 mm Scale division: 0.01 mm Locking screw defective Pos5 Manufacturer: Hommel Werke Measuring range: 25 – 50 mm Scale division: 0.01 mm Pos6 Manufacturer: Mahr Messtechnik Measuring range: 70 – 95 mm Scale division: 0.01 mm Pos7 Manufacturer: Tesa Measuring range: 0 – 25 mm Scale division: 0.01 mm Pos8 Manufacturer: Mahr Measuring range: 120 – 145 mm Scale division: 0.01 mm Pos9 Manufacturer: Mahr Pgodpfeyhmwqex Ag Djk Measuring range: 120 – 145 mm Scale division: 0.01 mm Pos10 Manufacturer: Mahr Measuring range: 120 – 145 mm Scale division: 0.01 mm Pos11 Manufacturer: Tesa Measuring range: 75 – 100 mm Scale division: 0.01 mm Locking screw missing Pos14 Manufacturer: J.E. Reinecker Chemnitz Measuring range: 100 – 125 mm Scale division: 0.01 mm Pos16 Manufacturer: Mahr Measuring range: 170 – 195 mm Scale division: 0.01 mm Pos17 Manufacturer: Mahr Measuring range: 170 – 195 mm Scale division: 0.01 mm Pos19 Manufacturer: Hommel Werke Measuring range: 200 – 225 mm Scale division: 0.01 mm Pos23 Manufacturer: Mahr Measuring range: 145 – 170 mm Scale division: 0.01 mm Pos26 Manufacturer: Kern Measuring range: 0 – 25 mm Scale division: 0.01 mm Pos28 Manufacturer: Unknown Measuring range: 70 – 95 mm Scale division: 0.01 mm Pos29 Manufacturer: Unknown Measuring range: 25 – 50 mm Scale division: 0.01 mm Pos30 Manufacturer: Mitutoyo Measuring range: 25 – 50 mm Scale division: 0.01 mm Pos35 Manufacturer: Mahr Measuring range: 120 – 145 mm Scale division: 0.01 mm Pos36 Manufacturer: Mahr Measuring range: 145 – 170 mm Scale division: 0.01 mm Pos37 Manufacturer: Mahr Measuring range: 170 – 195 mm Scale division: 0.01 mm Pos38 Manufacturer: Steyr Measuring range: 150 – 175 mm Scale division: 0.01 mm Pos39 Manufacturer: Steyr Measuring range: 175 – 200 mm Scale division: 0.01 mm Pos40 Manufacturer: PAV Measuring range: 250 – 275 mm Scale division: 0.01 mm Thread micrometers – screw micrometers Micrometer - Frame micrometers – measuring instrument e.g. for gear measurement – external measurement tool – disc micrometer – precision micrometer – precision measuring instrument – frame micrometer Price per piece: €35 net, ex-works, plus packaging costs Subject to errors and omissions in all technical data. Sale exclusively to countries within the EU.

Condition: new, Year of construction: 2025, 2 tables are connected with tandem circuit for a common load of 5000Kg. Technical description with the following main data: Load capacity 3000 kg static line load useful stroke 800 mm overall height 240 mm total height 1040 mm Pedpfxok E Hmte Ag Degk platform length 1300 mm platform width 1000 mm Material smooth sheet metal Lifting time approx. 18 sec. for the full useful stroke Lowering time load dependent E-connection 3 x 400 V/ 50 Hz + protective grounding, w. 16 A CEE-plug and 3 meter cable motor 2,2 kW, 1.400 rpm. valve voltage 24 V DC Sealing degree IP 54 general, solenoid valve and switch IP 65 Painting steel blue RAL 5011 Aggregate placement integrated in lifting table Control box dead man control incl. 2 m cable Total weight approx. 330 kg Tandem control for joint traversing. Attention: No guarantee can be given for 100% synchronous travel. Any differences in height are compensated for in the home position or top position! The safety shut-off strips of the two lifting tables are NOT mutually coupled. Minimum distance 500mm between the lifting tables. Maximum distance 3000mm between the lifting tables. Self-supporting floor frame with 4 flanged wheels in which the lift table is installed. 4 ball bearing flanged wheels wheelØ150/175, heavy duty version for highest load, made of turned steel C45. Overall height + approx. 50mm

Condition: ready for operation (used), Maximum forming capacity at full length: 9 gauge mild steel, corresponds to approx. 3.8mm, max. forming length: 3200mm, min. flange height: 6 x material thickness, clamping beam speed: maximum speed 91.44mm/s, downward speed 39.88mm/s, bending speed: 1879.6mm/s, bending angle range: 0°-180°. Dimensions X/Y/Z: approx. 5160mm/2220mm/1780mm, weight: approx. 5300kg. The machine has a front gauge, thus the bending geometry is stored and the sheet size is irrelevant. An on-site inspection is possible. Pgjdpfstia Hhox Ag Dek

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, suction capacity: 3,900 m³/h, input voltage: 400 V, power: 1.5 kW (2.04 HP), Equipment: cabin, documentation/manual, emergency stop, lighting, dimensions without fan and control panel! Work area - dimensions (mm): 990(w)x800(d)x1100(h) Overall dimension(mm): 1100(w)x1900h)x1100(h) Technical data: - Fan power 1.5kW (ATEX) - Fan suction capacity: 4100 m³/h (max 750Pa) - Lighting: 1pc 2x18W (ATEX) - Connection voltage: 230V - Frequency converter for smooth regulation of the fan - Three-stage air filtration - Intended for explosive environments - EX - Complete technical documentation Pgsdpfx Agjia Tabj Dek - CE Documentation - Warranty Possibility to order machines in various individual configurations and dimensions! Do not hesitate to contact us.

Condition: ready for operation (used), Year of construction: 1995, operating hours: 39,000 h, functionality: fully functional, Equipment: documentation/manual, A used and functional profile line for rigid PVC-profiles (300 x 100 mm), consisting of: Twin-screw extruder (parallel) Manufacturer: WEBER Type: DS 7.22 Year of manufacture: 1995 Machine no.: DS70-043 Operating hours: 39,000 hours Screw diameter: 70 mm Effective screw length: 22 x D Screw geometry: for rigid PVC profiles Torque: 4,500 Nm per screw Screw speed: max. 40 rpm, continuously adjustable Drive motor: DC low-voltage motor, thyristor-controlled Drive power: approx. 25 kW Cylinder heating/cooling zones: 5/3 (air cooling with fan) Adapter heating zone: 1 Tool heating zones: 5 Control: conventional control with digital temperature controllers Degassing: Busch rotary vane vacuum pump (1.5 kW) Output capacity, max.: 120-150 kg/h for hard PVC, depending on material Connected load: approx. 50 kW (without tool) Special accessories: Mass temperature sensor and mass pressure sensor Adapter between extruder connection and extrusion tool Used tool set for a window profile (widening), consisting of: - Extrusion tool ‘widening’, incl. heating bands - Dry calibration - Vacuum tank approx. 2 m long, with 8 slots for calibration discs - 16 calibration discs Vacuum calibration unit Manufacturer: Uniplast / Greiner Type: CAL VAK 4P Year of manufacture: 1992 Machine number: K9209590 Total length: 6500 mm Vacuum pumps: 4 x Speck vacuum pumps (4.3 kW each) Water circulation pumps: 2 x Calpeda (1.1 kW each) Caterpillar haul-off, incl. attached saw Manufacturer: Uniplast / Greiner Type: CAT PUL 2D Year of manufacture: 1992 Machine number: R 9204546 Haul-off: Effective contact length: 2000 mm Pad width: 250 mm Haul-off force, max.: approx. 25000 N Speed range: approx. max. 10 m/min. Profile saw: HM circular saw blade: Ø 450 mm Profile cross-section, max.: approx. 300 x 100 mm Tilting table Manufacturer: Ide Type: ME N 52/2 Year of manufacture: 1994 Length: 6000 mm Support width: 270 mm Note: The complet profile line was overhauled in 2020 and has only been in operation for Pedpjyx Dwkjfx Ag Dsgk 325 hours since then.

Condition: new, Year of construction: 2026, Ultrasonic Cleaning System - Ultrasonic Cleaning Device Pgsdjyz N Exopfx Ag Djk Purchased from insolvency assets - New, unused device! Manufacturer: Derui Ultrasonic Unit made entirely from stainless steel - Bottom-mounted ultrasonic, multi-frequency: switchable between 25/45 kHz, power (effective/peak): 1,600/3,200 W - Heating adjustable up to 80°C; power: 2,500 W - Basket dimensions (LxWxH): 530 x 400 x 300 mm - Tank dimensions (LxWxH): 550 x 420 x 320 mm - External dimensions (LxWxH): 650 x 560 x 830 mm - Weight of device (empty): 115 kg - Unit is mobile on castors - Including insulated cover - Including 1 stainless steel goods basket No warranty, as purchased from insolvency assets

Condition: new, Year of construction: 2026, Ultrasonic Cleaning System - Ultrasonic Cleaning Device Purchased from insolvency assets - unused new device! Manufacturer: Derui Ultrasonic Device made entirely of stainless steel - Bottom-mounted ultrasonic, multi-frequency: switchable between 25/45 kHz, Power (effective/peak): 1,000/2,000 watts - Adjustable heater up to 80°C; Power: 1,500 watts - Basket dimensions (LxWxH): 400 x 350 x 280h mm Psdeyz Nu Tjpfx Ag Dsgk - Tank dimensions (LxWxH): 420 x 370 x 300h mm - External dimensions (LxWxH): 520 x 510 x 810h mm - Weight of unit (empty): 85 kg - Unit is mobile on castors - Includes insulated cover - Includes 1 stainless steel goods basket No warranty, as purchased from insolvency assets.

Condition: used, Year of construction: 1996, Material dryer - Reinhardt Type: LTA 100 S Year of manufacture: 1996 Pgjdpfx Agoyzgchs Dok Operating temperature: 50–200°C

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany Psdpfxod Tbbdj Ag Dogk - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever racking: Screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights Height 4,160 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm shelf length (spacing 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. Podpfofdkb Tex Ag Dogk The base must be concrete, level and suitable for dowels and be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any official approvals that may be required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized Pedpfxjd Tqalj Ag Djgk - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,500 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,500 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Pedpfxjfdkb Uj Ag Degk When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 2.56 m with base section 1.0 m usable depth (1.2 m total depth) Pjdpfx Agoguk A He Dogk 12 cantilever arms with 1.0 m usable depth Longitudinal and diagonal braces for 4 m shelf length (spacing 1.3 m) Fastening material (screws, nuts and washers) (*No paint damage!) Net price on collection: € 1,490.00 plus VAT. Delivery possible for an additional charge Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 2,560 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. The substrate must be made of concrete, be level and suitable for dowels and be able to bear the acting loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity as well as any official approvals required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Pedpfx Agsfdkbhs Dogk Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany Pgodpfx Agjguk Dks Dsk - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports. Pgedpfx Agsguk Dvo Dek

Year of construction: 1960, condition: good (used), machine/vehicle number: 970015, Load capacity with horizontal faceplate position: 10 t Load capacity with vertical faceplate position and centre of gravity distance 300 mm: 10 t Load capacity with vertical faceplate position and centre of gravity distance 830 mm: 5.5 t Face plate dimensions: 1500 x 1500 mm face plate speed hydraulically infinitely variable: 0,025 - 0,75 rpm Pivoting range: 0 - 135 Swivel time for full swivel range to: 140 s Podpecblc Sofx Ag Djgk Swivel time for full swivel range down: 120 s Hydraulic drive: 380 V Height of swivel axis above floor: 1450 mm space requirement: 3800 x 1950 x 1800 mm Weight approx.: 3,5 t Weight of the counterweight: 2,3 t

Condition: good (used), Year of construction: 2002, Machine type: CNC Lathe Manufacturer: Reinecker Karstens Kopp - EMAG Model: VSC 250 DS Serial number: M02.43446 Year of manufacture: 2002 Podpfx Agjkyrwwe Dsgk Available immediately Ex site for self disassembly Optionally we can offer dismantling and loading

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: EcoPurge30, pneumatic purging pump for 2K-metering pump max. flow: 6l/min max. pressure: 21MPa Pgsdpfx Agepz H Hqs Dsk pressure ratio: 30:1

Condition: repair required (used), Sheet Metal Processing Unit, Decoiler, Straightener, Guillotine Shear, Reinhardt Maschinenbau GmbH Ras 228.60 Used Machine Manufacturer: Reinhardt Maschinenbau GmbH Model: Ras 28.60 Maximum Sheet Width: 1500 mm Maximum Sheet Thickness: 1.5 mm Total Weight: 9350 kg Features: Pgedpfxevkbrqe Ag Djk Decoiler Measuring Unit Sheet Straightener Guillotine Shear Electrical Data: Voltage: 400 V Power: 12 kW Frequency: 50 Hz Current: 35 A Note: The control panel display is not functioning.

Condition: excellent (used), fuel type: diesel, first registration: 02/1997, Year of construction: 1997, HATZ DIESEL 2L40CH Tank 1200 liters = Further information = Intended use: Construction Gross vehicle weight (GVW): 3,800 kg Technical condition: very good Pgedpfx Agjydfa Aj Dok Visual condition: very good Serial number: 12057 Please contact Thierry Leemans for further information.

Condition: used, No. 3245 Commissioning trolley / paint drying trolley Reinhold Beck Maschinenbau Trapez Used, good condition Pjdjxpilxspfx Ag Degk A total of 16 units available For space-saving storage until further processing For lacquered panels, strips or profiles Shelf width 500 - 2000 mm Shelf depth 510 mm 15 shelves, lined with rubber or foam Distance between shelves approx. 78 mm Load capacity per shelf 40 kg (600 kg in total) Mobile, some with brakes Castors in various designs Transport dimensions approx. 800 x 700 x 1850 mm LWH Weight approx. 90 kg Sale on behalf of customer, ex location near 73430 Aalen, without dismantling, transport and assembly Dismantling, loading and transport by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical information, description of condition, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, Year of construction: 2001, For sale: Reiner Diez AWS 6050 CS Full Carton Sealing Machine, year of manufacture 2001, used equipment, ex works. Details: Pgsdpfxoytxk Ho Ag Djk • Fully functional carton sealing machine • Light barrier control system for precise operation • Sealing width: 620 mm × 500 mm • Product size: up to max. 600 mm × 420 mm × 150 mm (L×W×H), depending on type and size of product • Robust industrial quality, ideal for production and packaging lines • Location: Salzburg, Austria • Inspection possible by appointment • Applications: manufacturing or packaging lines, companies that regularly seal boxes or products A video can be provided upon request Price: €4,900 negotiable – needs to be sold quickly, I am open to offers. Please make a realistic offer. Reiner Diez AWS 6050 CS Case Sealer – Light Barrier Control, 2001, Industrial Quality If you have any questions or need further information, please feel free to contact us by message or phone. 10 machines available – attractive total price for buyers who take all units. Quick transaction preferred!