Used Drying Granules 72 Kg for sale (68,928)

Condition: new, -User-friendly operating concept -Efficient design for cost-effective and safe operation -Cooling fan speed-controlled from 0-100%, thus eliminating the need for the usual pressure switch and thermostat for fan control -Fewer wearing parts while maintaining a constant pressure dew point -Control system displays five different alarm states and stores them in memory -Refrigeration compressor shuts off below 15°C ambient temperature if no compressed air is flowing through -Clear layout and easy accessibility of all maintenance components -With built-in automatic condensate drain The advantages at a glance -High cost-effectiveness -Excellent price-performance ratio -No unnecessary compressed air losses thanks to the integrated electronic condensate drain -Connected tools and machines are optimally protected -User-friendly operating concept Manufacturer Fsdpfxsu T Hrve Akhepk Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria - Air flow rate l/min: 1200 l/min - Air flow rate m³/h: 72 m³/h - Maximum pressure: 16 bar - Air connection: 1/2" - Power consumption: 0.2 kW Dimensions and weights: - Length (product) approx.: 325 mm - Width/depth (product) approx.: 430 mm - Height (product) approx.: 445 mm - Net weight approx.: 24 kg

Condition: used, Motan NS-D05-SR-2, granulate loader and dryer, Motan granulate feeder, used machine Manufacturer: Motan Type: NS-D05-ST-2 Fsdpfx Asxlpv Nekhopk Overall dimensions: 750 x 750 x 2500 mm Year: 1990 Tank volume : ~280 liters Electrical data: 240 V; 2.4 kW; 10 A - with granulate suction unit - with electric heating

Condition: good (used), Year of construction: 2010, Internal item no.: 26046 Fjdpfoy R Rumsx Akhspk Granulate drying plant + Multi-hopper system SOMOS D200 Year of manufacture: 2010 10x hopper Including electrical wiring diagram and operating manual

Condition: like new (used), operating hours: 5,000 h, PIOVAN granulate dryer 100 litres Fodpfx Aoxtitkokhspk As new, was only used for sampling in a toolmaking facility.

Condition: new, Year of construction: 2026, With the ERBA Granulate Dryer EVK 350, workpieces can be easily separated from the granulate using the integrated screening unit. The machine features excellent drying performance, a direct heating system, and digital temperature control. The working container is fully coated with polyurethane on the inside. The EVK 350 can be linked with other machines in a processing line. Fedpfx Aksyq Rcvehspk Technical Data: - Gross volume: 350 L - Unbalance motor power: 2.2 kW - Heating power: 3.6 kW - Speed: 1,400 rpm - Internal drum diameter: 1,210 mm As an experienced partner, we provide you with expertise in all aspects of vibratory finishing. Together with you, we develop efficient solutions to achieve optimal process results. All prices are net, plus the currently applicable VAT and shipping costs. The images may show the system including accessories, which are optionally available and subject to additional charges. If interested, we look forward to your inquiry. We are pleased to provide you with non-binding, professional advice. The European Commission provides a platform for online dispute resolution (ODR platform). This offer serves solely as an online presentation of our products. Contract negotiations are conducted via telecommunications (email, telephone, messaging portal). As a first step, we will make you a non-binding offer, which will also include our general terms and conditions with imprint and information on your right of withdrawal, before a purchase or contract is concluded.

Condition: new, Year of construction: 2026, With the ERBA Granulate Dryer EVK 500, workpieces can be easily separated from the granulate using the integrated screening unit. The dryer features outstanding drying performance, a direct heating system, and digital temperature control. The working container is fully coated internally with polyurethane. The EVK 500 can be integrated into production lines with other machines. Technical specifications: - Gross volume: 500 L - Vibration motor power: 4.0 kW - Heating power: 4.8 kW - Speed: 1,400 rpm - Inner drum diameter: 1,440 mm Fjdpsyq N Dfefx Akhepk As an experienced partner, we offer comprehensive expertise in the field of vibratory finishing. Together with you, we develop efficient solutions for optimal process results. All prices are net plus applicable VAT and shipping costs. The images displayed may show the machine with optional accessories, which are available at additional cost. If you are interested, we look forward to your inquiry. We will be happy to provide you with non-binding advice. The European Commission provides a platform for online dispute resolution (ODR platform). This listing is for informational purposes as an online representation of our products. All contract negotiations are conducted via telecommunication (e-mail, telephone, messaging portal). In the first step, we will provide you with a non-binding offer, which will also include our general terms and conditions (with legal notice) and information on your right of withdrawal, prior to any purchase or contract conclusion.

Condition: used, Year of construction: 1993, machine/vehicle number: 1075-14, Offer 20244 Technical data approx.: - Filling capacity approx. 250 L - Granulate feeding via suction device - Heating capacity 10 kW - Total drive power 10.5 kW Fodpfex Hhbvox Akhjpk - Temperature controller - Compressed air connection 6 - 8 bar - Mobile version - Required space W 850 x H 2350 x D 950 mm - Weight approx. 180 kg

Year of construction: 2012, condition: good (used), Colortronic Dry-Flex M400 Granule Dryer For sale is a used Dry-Flex M400 granule dryer from Colortronic. Technical details (according to the nameplate): Manufacturer: Colortronic, Friedrichsdorf (Germany) Model: Dry-Flex M400 Year of manufacture: 11/2012 Control panel: 6AV6642-0BA01-1AX1 Operating voltage: 400 V / 50 Hz Heating power: 33 kW Drive power: 5.5 kW Operating pressure: max. 6 bar Design: Granule dryer / plastic dryer Area of ​​application: Plastics processing, injection molding, extrusion Condition: Used, functional Financing through our bank is also possible. Fpodpfx Akexlqztshek komplett-konzept.leasingo.de Buy Colortronic Dry-Flex M400 granule dryers and other items at a great price – Here you can buy products from professionals for professionals – You'll find other attractive offers in our SHOP.

Year of construction: 2016, condition: ready for operation (used), A total of five (5) compact Helios granulate dryers with integrated conveying and control are available. Year of manufacture: 4x2016/1x2019, drying hopper volume: 30l, suction lance length: 810mm, drying capacity: approx. 6kg/h, max. drying temperature: 185°C. Machine dimensions X/Y/Z: approx. 420mm/420mm/625mm, weight: approx. 80kg, control: WINneo basic. Including conveying unit with dedusting and dust collection container with filter. Documentation available. An on site inspection is possible. Fjdpfx Akeydp Abehspk

Condition: good (used), Stock number: 3078 Fedpfoyk Hf Tsx Akhspk Manufacturer: Labotec Model: DDM 120-3 Year of manufacture: 1995 Machine number: 9SP5 5701642 Con-Evator PGT: 9ST6 1405 610 Operating hours: Container capacity: 120 l Temperature range: up to 180 °C Condition: good Dryer: 9 kW Blower: 1.5 kW Weight: 215 kg Dimensions: 1,200 x 800 x 1,700 mm

Year of construction: 2020, condition: new, Title: Strassburger Filter SF400oDEC/30S Integra – Stainless Steel Plate Filter Press – Year of Manufacture 2020 – NEW / unused Brief Description: For sale are unused, original-packaged plate and frame filter presses from the renowned German manufacturer Strassburger Filter GmbH + Co. KG. The units are in new condition, have never been put into operation, and are originally packaged by the manufacturer. Manufacturer: Strassburger Filter GmbH + Co. KG (Germany) Model / Type: SF400oDEC/30S, Integra format Machine designation: FI6722 – FP PRE 1 Year of Manufacture: 2020 Serial Number: e.g. 032003303920 (other serial numbers available) CE Marking: Yes Condition: New / unused Original packaging Never installed, never used in production Stock item Quantity available: 3 identical machines available New Price: New price €94,000 per unit Design / Material: Completely stainless steel Plate and frame filter press Gasketed plates Pharmaceutical / Biotech design Hydraulic closure including hydraulic unit CE-compliant Technical Data: Plate format: 425 × 400 mm Number of filter chambers: 28 Total filter area: approx. 3.4 m² Total volume: approx. 13.6 liters (100%) Max. operating pressure: 6 bar Max. operating temperature: 95 °C CIP / SIP capable (cleaning up to 121 °C) Dimensions & Weight: Length: approx. 1,649 mm Width: approx. 600 mm Height: approx. 1,145 mm Weight of filter frame: approx. 480 kg Weight of plate pack: approx. 120 kg Plate Pack: 14 filter plates Fpsdpjx Ihufjfx Akhek 13 filter frames 1 end frame 1 baffle plate 28 filter layers per configuration Hydraulics & Drive: Hydraulic closure Hydraulic unit included Motor power: 1.5 kW Electrical connection: 400 V / 50 Hz Valve voltage: 24 V DC Compressed air requirement: 3.0 bar Connections: Product inlet and outlet DN25 Vent / drain DN15 Connections according to DIN 11864-2 Drip tray available Application areas: Pharmaceutical production Biotechnology Chemical industry Pre-filtration Precipitation and clarification processes Location: Germany Inspection possible by appointment Available immediately

Condition: good (used), Wilhelm Haarmann KG, DM PU, grinding machine. Fjdpfx Ajbq Syyskhepk

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Perforated sheet metal floor Equipment: - Perforated sheet metal floor - Shovel rack - 10x Lashing points Net price: €4,445.38 / Gross price: €5,290.00 Article number: DPT227281300.02 Technical data: • Brand: Brian James • Model: Digger Plant 2 • Vehicle type: Construction machinery • Vehicle condition: New vehicle • First registration: No first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 280 x 130 x 20 cm • External dimensions (LxWxH): 465 x 179 x 197 cm • Loading height of the floor: 38 cm • Permissible total weight: 2,700 kg • Unladen weight: 557 kg • Payload: 2,143 kg • Chassis: Low loader (wheels next to the body) • Tires: 165R13C • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Robust steel mudguards with non-slip perforated profile • Reinforced perforated steel floor, internally on the sides • Screen-printed wood floor in the center, 18mm, non-slip and waterproof • Very stable steel frame, welded • Frame completely hot-dip galvanized • Chassis with two additional longitudinal members under the loading platform • Perforated steel individual ramps, steel galvanized, adjustable, L=1.62m • Stable ACME locking system: closes silently, loading ramps are held in place by safety clamp locks, rubber buffer dampens noise • Very low chassis for a low approach angle • Excavator shovel rack • 10x lashing points on the side wall (1000dAN/kg), TÜV certified • Free choice of lashing points when lashing to the perforated steel floor Fodpoztd H Eofx Akhopk • Maintenance-free axles and damping systems designed for long journeys and heavy loads • Spare wheel easily accessible, mounted on the side wall • Reversing automatic • ALKO overrun device and parking brake • Steel cast coupling head with integrated high-security lock ALKO • Very stable V-drawbar, REINFORCED • 13-pin plug • Complete LED lighting: Extremely bright, durable and reliable. • Reversing lights • Integrated rear fog lamp • Robust protection of the rear lights • Heavy-duty support wheel • 5-year chassis warranty _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to make requests! _____ - Financing or leasing possible - Delivery nationwide possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export license plate incl. customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale are reserved -

Year of construction: 2023, operating hours: 100 h, condition: good (used), functionality: fully functional, Water treatment system for compounding and extrusion plants For sale is a complete industrial water treatment system for supplying a compounding or extrusion plant with softened and fully demineralized process water. The system consists of pre-filtration, a dual softening unit, a reverse osmosis unit, a 3,000-liter permeate tank, and a frequency-controlled dual booster pump unit. The system is particularly suitable for closed-loop cooling water circuits and for applications where a consistently high water quality and a reliable supply to the production plant are required. System configuration Pre-filtration and protection Backwash filter for mechanical impurities Flow rate: 7.5 m³/h at a pressure drop of 0.5 bar Automatic, time-controlled backwash System separator with a KVS value of 12 m³/h Connection size: R 1" Pressure regulator with a DIN flow rate of 5.3 m³/h Safety module Connection block with integrated bypass and sampling valve Flexible pressure hoses, length 1,000 mm, Rp 1", up to 10 bar Fjdpfx Akjzt Sb Dshspk Dual softening unit Dual softening unit for continuous operation Nominal flow rate: 2.9 m³/h Capacity: 200 m³ × °dH each Resin disinfection system Salt deficiency switch with potential-free alarm or low-level signal Sampling group with pressure gauge and sampling valve Hardness control unit for wall mounting Installation fitting for 1" pipe Due to the dual design, one softening column can be regenerated while the second column continues to supply softened water. Reverse osmosis unit Reverse osmosis unit with vertically arranged high-performance modules, permeate recirculation, and automatic concentrate flushing. Technical data: Permeate flow rate at 15 °C: approx. 450 l/h Recovery rate: approx. 75 % Salt rejection rate: approx. 98.5 % Required inlet pressure: 2–6 bar Feed water connection: DN 25 Permeate connection: DN 20 Concentrate connection: DN 15 Supply voltage: 3 × 400 V / 50 Hz Dimensions: approx. 1,800 × 610 × 810 mm (H × W × D) Permeate tank Black PE storage tank Capacity: 3,000 liters With level control and various connections Dimensions: approx. 1,750 × 995 × 2,450 mm (H × W × D) Dual booster pump unit Pre-assembled and electrically wired booster pump unit on a stainless steel frame, ready for connection. Equipped with two pumps and integrated frequency converters for constant and demand-based pressure supply. Technical data: Nominal flow rate per pump: 2.0 m³/h Nominal head: 43.6 m Flow rate with one pump: approx. 0.6–3.0 m³/h Flow rate with two pumps: approx. 1.2–6.0 m³/h Delivery pressure at maximum flow rate: approx. 2.5 bar Zero flow head: approx. 6.7 bar Factory-set constant pressure: 4.0 bar Pre-pressure of the diaphragm expansion tank: 3.5 bar Measuring range of the pressure sensors: 0–10 bar Diaphragm expansion tank: 8 liters Permissible water temperature: 1–30 °C Permissible ambient temperature: 1–40 °C Suction connection: DN 65 / PN 10, loose flange Pressure connection: 50-mm socket Supply voltage: 3 × 380–500 V Motor power: 2 × 1.1 kW Nominal current per pump: 2.2–1.9 A Dimensions: approx. 950 × 700 × 858 mm Dry weight: approx. 55 kg Technical specifications based on available documentation. Subject to prior sale and errors. An inspection of the system is possible by prior arrangement.

Condition: used, Emergency generator set Manufacturer: Anton Piller KG Type: NKTB 2-818 Year of manufacture: unknown Fsdpeztnh Hjfx Akhopk Speed: 3000 rpm Voltage: 400 / 231 V Current: 118 A Frequency: 50 Hz Apparent power: 82 kVA Efficiency/Power factor: $\cos \varphi = 0.8$ (corresponds to approximately 65.6 kW active power) Protection class: IP 23 Insulation class: F 10826ä

Condition: used, Year of construction: 2016, refrigerant: ammonia Additional title: room cooling Volume: 10 l Permissible pressure: 32 bar Permissible temperature: 150 °C Rotation speed fan: 1400 rpm Features: refrigerant: ammonia, 1 fan; control cabinet with temperature control Fpjdpjzty Ewjfx Akhek

Condition: used, Year of construction: 1981, Insulated and clad stainless steel pressure tank with various fittings. Additional title: insulated tank Capacity: 12800 l Pressure: 4 bar Temperature: 20 °C Fpedpfx Asztyy Uekhek Length: 5,1 m Width: 2,1 m Weight: 2000 kg Material: stainless steel Position: hozizontal Features: insulated and cladded, outlet DN65, manhole, 2 spray heads

Condition: used, Year of construction: 2002, Additional title: Wort cooling Fedpfx Akeztywtjhopk

Year of construction: 2023, condition: used, Mobile sealing machine with vacuum and protective gas function Manufacturer: BS Verpackung GmbH & Co. KG Model: BS25 Basic Year of manufacture according to nameplate: 2023 Maximum sealing area: 365 × 280 mm Maximum tray height: 115 mm Cycles: 1.5 / min. (depending on the set process parameters) External dimensions: 560 × 970 × 1450 mm (W x D x H) Maximum film width: 380 mm Compressed air connection: 6 bar Vacuum pump: 25 m³/h Weight: 180 kg Power connection: 1 phase, 230 / 400 V, 50 Hz Power consumption: 2.1 kW Sealing types: Sealing / Vacuum / Gas Features • Service-friendly design • Quick-change system for the sealing unit • Powerful Busch vacuum pump • High-quality sensor control • Precision cutter for clean contour cutting • Very quiet, sound-dampened compressed air compressor Purchase price (net): €10,500 plus legally applicable VAT. Value-added tax will be shown separately on our invoice. Subject to changes, errors and prior sale. Sale is made without warranty and guarantee and only to business customers. Fedpfx Akozp Umhehepk Inquiries will be processed from Monday to Friday between 8 a.m. and 4 p.m.

Year of construction: 2018, condition: excellent (used), functionality: fully functional, machine/vehicle number: 10044/0218, Detailní fotografie a produktové specifikace naleznete v PDF souboru v příloze. Soustruhy jsou speciálně navrženy pro zpracování snubních prstenů a náramků. Oddělení vnitřního a vnějšího obrábění na dva stroje zajišťuje vysokou produktivitu. Veškeré potřebné soustružnické operace (rovinné obrábění, rádiusy, boční obrábění a srážení hran) lze provádět postupně bez nutnosti úprav nebo přestavby strojů. Technické parametry: TLI 10 Fpodoy S Sz Repfx Akhek Parametr Hodnota Pohon 0,55 kW s elektrickou brzdou Napájení 380 V / 50 Hz Regulace otáček potenciometr Rozsah otáček 0–1400 ot./min Rozměry 100 × 70 × 130 cm Hmotnost 170–190 kg

Condition: good (used), Year of construction: 1999, Esta Spänesog-SB 8151 Chip Extractor High-performance industrial extraction system from the quality manufacturer ESTA, model Spänesog-SB 8151. The unit is ideally suited for workshops for the extraction of chips and dust (e.g., in metal or wood processing). Technical specifications Manufacturer: ESTA Apparatebau GmbH & Co. KG Model / Type: Spänesog-SB 8151 Voltage (Volts): 400 V Power (kW): 2.2 kW Current (Amperes): 4.6 A Frequency (Hz): 50 Hz Fodsznibwepfx Akhepk Protection class: IP 54 (dust and splash-proof) You can find more items—both new and used—in our shop! International shipping costs available upon request!

Condition: used, empty load weight: 5,450 kg, maximum load weight: 12,550 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 07/2012, next inspection (TÜV): 07/2027, loading space length: 7,700 mm, loading space width: 2,500 mm, loading space height: 2,300 mm, loading space volume: 44 m³, total length: 7,700 mm, suspension: air, tire size: 385/65 22,5, tire condition: 30 %, color: blue, Year of construction: 2012, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, Equipment: ABS, tail-lift, truck registration, Reference number for inquiries: 408211 Krone, S 24 * Year of manufacture: 2012 * ABS, Anti-lock Braking System * EBS, Electronic Braking System * Tail lift * Aluminum rims * Air suspension * Tandem trailer Fpodpfxjynvzro Akhok * Load securing certificate DIN EN 12642 Code XL * VDI 2700 EN 12195 * Duomatic air coupling * 15-pole connection plug * Lifting and lowering device * Rear supports * Inspections: MOT / Emissions test valid until 07.2027 * Suspension: Air * Gross vehicle weight: 18,000 kg * Tare weight: 5,450 kg * Payload: 12,550 kg * Permissible gross vehicle weight: 18,000 kg * Axle manufacturer: BPW * Tire condition, 1st axle: 30% – 30%, Tire size: 385/65 R22.5 * Tire condition, 2nd axle: 30% – 40%, Tire size: 385/65 R22.5 * Tire sizes: 385/65 R22.5 * Internal dimensions: L = 7700 mm, W = 2500 mm, H = 2300 mm * Internal volume*: 44 m³ * Pallet spaces: 19 * Trailer: Krone * Body: Ewers, Swing-wall semi-trailer * Tail lift: BÄR BC 2500, load capacity 2500 kg Disclaimer: Subject to changes, prior sale, and errors. More pictures and videos can be found on our website. Our extensive service includes, for example: * Purchase/sale/rental of commercial vehicles * Quick and straightforward financing * Application for all (export) documents * Ordering export license plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading/cargo securing * TÜV inspections, registration service * Transport of commercial vehicles Please contact our trained specialists. We will be happy to advise you.

Condition: new, empty load weight: 630 kg, maximum load weight: 1,970 kg, overall weight: 2,600 kg, loading space length: 3,060 mm, loading space width: 1,750 mm, loading space height: 900 mm, tire size: 165r13, Product information "UNSINN WEB-DK3017-26-13-E 2600kg 306x175x85cm Grated sides, three-way tipper" Three-way tipper with a corrugated grating superstructure from trailer manufacturer Unsinn, model WEB-DK3017-26-13-E. Made in Germany! This flatbed trailer, designed as a three-way tipper, is equipped with electric hydraulics for tipping. The folding and removable side walls allow for easy loading of the trailer from the side and rear using a forklift, wheel loader, or by hand. A welded, hot-dip galvanized steel frame makes the tipper trailer very stable. The tipper with grated sides is equipped with folding and removable side walls, a solid steel floor, electro-hydraulic system, automatic support wheel, lashing eyes, welded hot-dip galvanized frame, rail system, and a very stable V-drawbar. For an additional charge, tipper accessories such as side wall extensions, tarpaulin and frame, flat tarpaulin, net, box, loading ramps, and supports are available. ----- With us, you can also get: Fodpfx Asg Un Dzekhopk · Financing · Leasing (for commercial customers only) · Consultation · Delivery throughout Germany (except islands) · Accessories · Rental trailers · Spare parts · Registration service for DH – HB – DEL · Service · Repair · TÜV inspection for car trailers Car trailer center Ahrens Moordeicher Landstraße 37 28816 Stuhr near Bremen Opening hours: Monday - Friday 8:00 a.m. - 5:00 p.m.

Condition: ready for operation (used), Wingspan: 3950 mm Overall height: 3650 mm Fodpezp Iqgjfx Akhspk Load capacity: 4000 kg without lifting device

Condition: like new (used), 60 linear meters of Nedcon tire racking New & used, see pictures. Height: 3 m Depth: 50 cm Beam length: 3.7 m, beam capacity/shelf: 1000 kg Frame: Blue Beams: Blue, painted Negotiable price: € 5,250.00 net, ex warehouse Offer includes: + 16 units of pre-assembled frames, depth 50 cm, height 3 m + 90 units of beams, length 3.7 m, 1000 kg capacity/shelf + 180 units of locking devices + 64 units of concrete anchors Goods are in stock. Transport and assembly are available upon request. Inspection possible at any time by appointment. Fedpfx Aksi Hl T Iehjpk Further information available upon request. We constantly have over 5,000 linear meters of pallet racking in stock from numerous manufacturers. (Subject to changes and errors in technical data, information, and prices, as well as prior sale! See our general terms and conditions, all prices excl. VAT, ex warehouse) Lenox Trading – Top storage technology & used & new heavy-duty racking Description: Are you looking for high-quality storage racks to buy? With around 100 employees, Lenox Trading is one of the largest dealers of new and used storage technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of racking available for immediate delivery • 20,000 m² of storage platforms & steel construction platforms immediately available • 30-50 semi-trailer loads of goods handled weekly for maximum selection 📦 OUR RANGE (BUY CHEAP ONLINE): Whether pallet racking, heavy-duty racking, high-bay racking, shelving racking, tire racking, or racking for IBC containers – we deliver and assemble throughout Europe with our OWN team! Including CAD planning, transport, disassembly and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY SALES: • SSI Schäfer (Schäfer Lagertechnik, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, Heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND PILLAR: ONLINE AUCTIONS & SALES For disassembly and clearance orders, we offer a complete, all-round service package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete inventory including complete clearance. 2. Commission auction: Conducting auctions on behalf of clients. Our full-service provided by our own employees: cataloging, office preparation, inspection, goods issue, logistics, dismantling and complete handover. Whether you became aware of us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking systems – we guarantee the best conditions. Contact us for a non-binding offer!