Used Duralbend Griffin 76 - Cnc Pipe Bending Machine for sale (67,252)

Condition: used, CNC press brake FASTI type 904-125/30 serial no. 95-904-5775 year of construction 1995 Pressure capacity 125 ton. Kdodpfx Aohmmfkenwsn Working length 3050 mm Stroke approx. 335 mm Stand projection 300 mm Clearance between the side uprights 2550 mm Tool installation height max. 465 mm (opening width between the tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Backgauge X-axis 500 mm Backgauge R-axis 115 mm Backgauge Z-axis approx. 1950 mm Lowering speed Y rapid traverse 90 mm/s Lowering speed Y-operation 8.9 mm/s Return stroke speed Y-retraction 75 mm/s Oil filling approx. 160 liters Motor power 18.5 kW Mains connection 400 Volt, 50 Hz, 20 Amp. - 7-axis CNC control DELEM type DA 58 with LCD screen - 1 axis for back gauge - stop depth (X-axis) - 2 axes for back gauge - fence height (finger R1 + finger R2) - 2 axes for back gauge - stop finger, laterally movable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and 2-hand control panel or 2-hand control panel only - Hydraulic tool clamping for the TRUMPF upper tool system, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool pin 13 x 20 mm) - FIESSLER safety light barrier, type AKAS - 2 material support arms at the front, manually movable to the side and height-adjustable - Electrical diagram, hydraulic diagram, user manual for control available - Control cabinet on the machine - without tools Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons. Good condition

Condition: good (used), Year of construction: 2018, Manufacturer: INDUCTAFLEX Type: AL-3e Control system: ACCURATE touch screen Year of construction: 2018 3 rolls driven servo Torq each roller 3500 nM Electrically support rolls Intelligent software : Kdodpfx Anjvd Dftjwsn Ellipse program U Bend shapes control of tangents Auto section detector Specifications Metric US Standard Horizontal and Vertical Horizontal Axis Ø 105 mm Number of rollers 3 Stroke X axis 0 - 400 mm Dimensions (estimate) length 4500 mm width 3200 mm height 2700 mm weight 3300 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: new, functionality: fully functional, Year of construction: 2021, For sale: Brand new, never-used DAVI bending machine. Kjdpfjy N Rbwox Anwjdn *MAIN FEATURES MCP 18* *1. Type and Capacity* - *3 hydraulically driven rollers*, pyramid configuration - *Shafts Ø 180 mm* → this is the "18" in MCP 18 - *Bending*: round, square, rectangular tubes, angles, flat bars, UPN, IPE, HEA... all b235 profiles *2. Indicative capacities on MCP series* DAVI does not provide the exact MCP 18 datasheet online, but for the equivalent MCP range: Profile Approx capacity MCP 18 Round tube Ø 6" to 8" depending on wall thickness Solid square 80x80 mm to 100x100 mm Angle 120x120x12 mm UPN UPN 200 - 240 IPE flat flange IPE 200 - 240 Actual figures depend on wall thickness and steel grade. The 18 cm Ø shafts make this a mid/high-category machine. For all available options, please refer to the photo in the listing.

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, stroke length: 200 mm, operating speed: 50 mm/s, reverse speed: 180 mm/s, table length: 3,200 mm, total length: 3,915 mm, total width: 1,605 mm, total height: 2,655 mm, overall weight: 8,000 kg, bending force (max.): 1,000 t, bending angle (max.): 90 °, warranty duration: 24 months, working height: 450 mm, All-Electric Servo Bending Machine Nominal force(KN): 1000 Slider stroke(mm): 200 Throat depth (mm): 360 X-axistravel(mm): 600 R-axistravel(mm): 200 Z-axistravel(mm): 2500 🔹 Smart CNC System – SL100-P with high-end algorithms and 12-inch touchscreen for intuitive operation. 🔹 High-Precision Structure – Finite element analysis (FEA), annealed, and one-time machining for long-term stability and accuracy. Kdjdov Hchlspfx Anwon 🔹 4-Axis Intelligent Backgauge – AC servo-driven, high-speed positioning with automatic collision avoidance. 🔹 Precision Compensation System – Adjustable convex strips & fine-tuning mechanism for optimal bending accuracy. 🔹 Powerful & Durable Drive – High-torque servo motor, heavy-duty ball screws & sealed protection for longevity. 🔹 Fully Closed-Loop Control – Y1/Y2 magnetic scale feedback, positioning accuracy ±5μm. 🔹 Optimized Electrical System – Closed electrical box, heat dissipation, & neat wiring for reliability and easy maintenance. 🔹 Imported Precision Components – Ball screws & linear guides ensure accuracy without stroke compensation. 🔹 High precision, stability, and smart automation – designed for professional sheet metal bending!

Condition: good (used), functionality: fully functional, Year of construction: 2016, Four-roll hydraulic CNC sheet metal bending machine. The machine is designed for bending sheet metal and manufacturing cylindrical or conical parts. Thanks to its four-roll design, it enables precise pre-bending and bending in a single working cycle. Suitable for mechanical engineering production, steel structures, tanks, pipe components, and other heavy-duty sheet metal applications. Technical specifications: Manufacturer: Durma / Durmazlar Model: HRB-4 2535 Year of manufacture: 2016 Type: Four-roll hydraulic sheet metal bending machine with CNC control Max. sheet thickness: 35 mm Working width: approx. 2,560 mm Machine length: 5,010 mm Machine width: 2,060 mm Machine height: 2,050 mm Machine weight: 20,300 kg Motor power: 37.4 kW Kedey Sz Erepfx Anwjdn Voltage: 400 V / 50 Hz Serial number: 683316002 Equipment and accessories: CNC control Hydraulic roll adjustment Side support Top support Feeding table / supporting roller guide Documentation / operating manual The machine is connected and can be tested by arrangement.

Condition: used, Year of construction: 2012, Make: ROSENBERGER, Model: RB20-LR, Year of manufacture: 2012, Serial no.: M1057, 2 CNC bending heads, Bending capacity Ø 30 x 2 mm (steel), Bending planes selectable within a total tool height of 138 mm, Travel range X/Y/Z 1,416 x 260 x 1,170 mm, Collet head with feed slide, PLC control Siemens S7-300, Touch display, Loading magazine, 2 robots, make: Motoman, Robot control unit, make: Yasnac, Model: K10, Teach-in terminal MRC, Spray cleaning system, Chamber size 500 x 300 x 1,000 mm, PLC control with operator panel, make: Siemens, Model: SIMATIC Panel, Thermostat, 3 washing chambers, Tube cutting station, make: FZH, year: 2012, serial no.: M99964, Control system, Display make: Siemens, Model: SIMATIC Panel touch. Ksdpfx Ansyx Eriowjdn

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Downstroke bending machine with 4-axis CNC control Serial No. MK 285 Year of manufacture: 1998 CNC control SAFAN software version 5.07 TS1 Press force: 500 kN (50 tons) Working length: 2550 mm Stroke: 215 mm Clearance between side frames: 2700 mm Tool installation height: max. 414 mm Table width: 55 mm Table height above floor: 950 mm Approach speed: approx. 75 mm/s Return speed: approx. 75 mm/s Working speed: approx. 1.6 to 15 mm/s Motor power: 9 kW Power supply: 400 Volt, 50 Hz, 9 kW - 4-axis CNC control SAFAN software version 5.07 TS1, Y1 and Y2 axis for ram Kdedsxpqy Dspfx Anwjn - 2-axis backgauge, X-axis (backgauge depth adjustment), R-axis (backgauge height adjustment) - 2 backgauge fingers, laterally adjustable by hand (Z1, Z2) - Ram drive via 2 servomotors and belt drive - Working speed steplessly adjustable - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for the upper tool (UKB system, type 50.571, UKB System A) - Tool holder for lower tool, 55 mm wide with 13 mm groove, 21 mm groove depth (Trumpf system or UKB System B) - Supplied without bending tools (a new set from UKB costs approx. 3,600 EUR net) - Displayed total operating hours = 8,120 h - Number of working strokes: 1,049,789 strokes Space requirements (L x W x H): 3450 x 1850 x 2650 mm Weight: 5,000 kg Good condition

Condition: new, L-beam 50x5 mm square material 50x40x3 mm I - beam section - flat steel 120x15 mm I-beam section - upend 60x10 mm round material Ø 35 mm tube diameter Ø 70x2 mm roll diameter 155 mm bending speed 4,3 m/min Shaft diameter 50 mm total power requirement 1,5 kW weight 400 kg dimensions 830x730x1350 mm Kdedpfsyvvnijx Anwen Domestic equipments: - Extended special steel shafts - a set of hardened rollers - Bottom rollers are driven - lateral straightening rollers - Foot pedal - horizontal and vertical working - CE mark / Declaration of Conformity - Operating instructions in German

Condition: ready for operation (used), Pipe Bender, Tube Bending Machine, Profile Bending Machine, SHS/RHS Bender, Used Machine Manufacturer: Schwarze-Wirtz Model: Perfect H135 Dimensions: 6115 x 2870 x 1300 mm Bending Capacity: Round tube: Ø 130 mm, bending radius: 500 mm Square tube: 30 mm, radius: 380 mm 45 mm, radius: 500 mm 50 mm, radius: 500 mm 70 mm, radius: 500 mm 90 mm, radius: 500 mm Kedpfx Anjwhmv Uewsdn Bending Angle: up to 180° Electrical Specifications: 380 V

Year of construction: 2010, operating hours: 196 h, condition: excellent (used), functionality: limited functionality, bending cheek thickness: 100 mm, additional equipment features: Separate Bending Arm Available, bending radius (min.): 700 mm, The Machine is VERY Sparingly used, Exactly used for bending 196 Bends. Available in Dismantled Condition in Southern Part Of INDIA, for a Very Attractive Price . Ksdjzc Uu Hepfx Anwjdn

Condition: new, I-beam section - flat steel 80x20 (d1200) mm I-beam section - upend 80x25 (d2100) mm L-beam 50x50x6 (d1000) mm bar material - diameter 40 (d800) mm square material 60x60x3 (d4000) mm rectangle 80x30x3 (d6000) mm tube diameter max. 70x2 (d1600) mm tool adaptor 60 mm roll diameter 177 mm bending speed 6,4 m/min total power requirement 4 kW machine weight ab. 970 kg Overall size 1400x950x1450 mm Domestic equipments: - hydr. roller drive - Planetary gearbox delivery of the 2 lower rollers - for extra small bending radii - hardened tool holder (42CrMo4) - Standard roller set, hardened - lateral straightening rollers Kdjdpfsyv Nwqox Anwon - mobile control panel - 3 driven rollers - Digital display - Machine horizontal u. vertically usable - CE mark / Declaration of Conformity - Operating instructions in German

Condition: new, I-beam section - upend 100 x 20 (d 2100) mm tube diameter max. 100 x 3 (d 3000) mm L-beam 80 x 80 x 8 (d 2000) mm square material 50 x 25 x 2 (d 600) mm bar material - diameter 60,0 (d 1000) mm I-beam section - flat steel 120 x 30 (d 600) max. 140 mm tool taper 80,0 turning speeds 4,2 U/min weight 1600 kg dimensions 1240 x 1375 x 1540 mm Domestic equipments: - Welded steel structure (St-52) - Rollers are driven by 3 separate hydraulic motors Ksdjyv Nniopfx Anwjdn - Stepless speed - Special steel gears - Shafts are made of special steel, hardened and ground - Manual lubrication - Guide rollers are hydraulically adjustable - Lower rollers are hydraulically movable up and down - Infinitely adjustable speed of the lower rollers, move after below and above - Digital display for lower rollers - Separate and movable control panel - Horizontal and vertical operation - Production quality certified according to CE, ISO 9001 - 2015, TSEK and TURQUM Additional equipment: - hydraulically adjustable straightening rollers

Condition: new, round material 40 mm tube diameter 70x2 mm square material 80x30x3 mm L-beam 50 x 5 mm I-beam section - upend 50 x 15 mm roll diameter 157 mm I - beam section - flat steel 80 x 16 mm Shaft diameter 50 mm bending speed 2,95 m/min total power requirement 1,1 kW weight of the machine ca. 500 kg dimensions of the machine ca. 1000x950x1450 mm Domestic equipments: Kdjdpfx Ansyv Nk Rswjn - Special steel shafts (42CrMo4) hardened and ground - a set of standard rollers - lower rollers up and down hydraulically deliverable - digital display for lower rollers - separate control panel - in one direction manually adjustable lateral straightening rollers - manual lubrication - horizontal and vertical operation - CE mark / Declaration of Conformity - Operating instructions in German

Condition: new, bending speed 2.1 m/min Bending capacity - square 30x30 mm bending capacity - flat iron 80x15 mm Bending capacity - flat iron on edge 50x10 mm tube diameter 1" oder 60x2 mm Shaft diameter - upper 35 mm Shaft diameter - lower 30 mm total power requirement 0,75 kw range L-W-H 650 x 500 x 1300 mm weight 170 kg Standard features: - hardened special steel shafts Kdodpoy H N Rfjfx Anwen - a set of hardened rollers - Bottom rollers are driven - lateral straightening rollers - Foot pedal - horizontal and vertical working

Condition: new, 100 mm roll diameter 315 mm bending speed 5 m/min bending capacity - flat iron max. 12 x 20 mm 75 mm Drive 11 kW weight 2.600 kg range L-W-H 1950x1600x2100 mm Kdedpfxsy H N Idj Anwon Equipment / Accessories: - Two driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - Footswitch - standard roller set

Condition: good (used), functionality: limited functionality, Year of construction: 1990, WE OFFER AN GOOD CONDITION MACHINE HERBER 75 CNC Ksdpevmtxzjfx Anwsdn YEAR: Not known MAX CAPACITY: 75 X 3mm MACHINE NEED BE PUT BACK ON POWER AND CHECKED OIL GASKET NEED BE CHANGED FROM THE OIL TANK . MACHINE WAS WORKING IN SAAB - SCANIA TRUCKS IN SWEEDEN

Condition: new, Year of construction: 2020, Electric elbow making machine is the mechanism for forming elbow from round and rectangular pipes with different diameters. Elbow making machine EEM-200plus is the better version of EEM-200 machine. It has additional fourth bottom pressing tool so it presses pipes from all four sides while bending and provides better quality of elbow. You can use our machine for working with round pipes as with rectangular pipes. Elbow making machine EEM-200plus lets you to work with pipes from 80 to 200mm. Kodpfx Anjf Epznowedn Pay attention: Inside diameter of the pipe you use for bending has to be 1mm bigger than bending matrix of the machine!! The lock of the pipe has to be closed or welded to avoid opening of pipe while bending!! Elbow making machine EEM-200 is electric so it doesn’t need any air or oil system to work. Electric consumption is 1.5 kW/hour for this elbow machine. The needed voltage is 380V. It could be used in environment with temperature from -5 to +45 Celsius degrees. Elbow making machine is good for bending pipes with maximum thickness 0.8mm. Elbow making machine EEM-200plus bends elbows thank to special pressing tools. There is one set of tools for bending one diameter of pipe you need. So to bend more diameters of pipes you have to get additional pressing tools. It goes four pressing set tools with the machine so you can bend four diameters of pipes with it in the range from 80 to 200mm (that you choose by your own)

Condition: new, functionality: fully functional, Year of construction: 2022, machine/vehicle number: 111/52, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, Equipment: documentation/manual, foot remote control, For sale: New/unused Amob MAH 40/3 CNC profile bending machine. We purchased the machine new from Maqfort in 2022. Due to relocation of production and changes in the order profile, we found no use for the machine; it has not even been connected or commissioned. Therefore, it is a brand new machine. Kdedpfsy Hn Uvjx Anwsn Equipment: Hydraulically controlled top roller feed / Can be operated in both vertical and horizontal positions / 3 mechanically driven rollers / Manually adjustable side rolls / CNC control / Movable foot pedal includes digital display, 2 pedals, emergency stop button / 3 standard (hardened) tooling rollers. Price: 25,153 euros. In case of sale, Maqfort will provide installation, commissioning and staff training according to agreement.

Condition: new, Year of construction: 2024, pipe diameter (max.): 90 mm, bending angle (max.): 190 °, bending radius (max.): 250 mm, total length: 5,800 mm, total width: 1,550 mm, total height: 1,750 mm, warranty duration: 12 months, sheet thickness aluminum (max.): 4 mm, sheet thickness steel (max.): 4 mm, MAXIMUM CAPACITY : Ø90X4MM MAXIMUM BENDING RADIUS : 250MM DEGREE OF TWIST : 190 DEGREE WORKING LENGTH : 4000MM MOTOR POWER : 27.5KW LENGTH : 5800MM WIDTH : 1550MM HEIGHT : 1750MM BENDING SPEED : CHANGEABLE STANDARD FEATURES One set of bending molds in the dimensions required by the customer Servo Motorized Feed Axis Servo Motorized Rotation Axis Automatic Mailing of Detailed Work Report Kjdpfsu Hiu Asx Anwedn Servo Bending Axis (SFB 38-CNC/R1) Gearbox Driven Bending System (51-65-76-90) CNC Control Unit with mobile 21" color screen 3D Simulation Twisting Displaying Daily, Weekly and Monthly Total Production Amount Calculating the total length of material to be used Calculate the estimated bending process time Convert X-Y-Z data to Y-B-C Getting remote assistance Portable foot pedal with emergency stop Manual - Automatic Twisting Bending with - Without Bending Safety plate with switch behind the bending head Automatic headstock lubrication system (SFB 38 CNC/R1) Hydraulic Crimping Hydraulic Malafa Hydraulic Stop Hydraulic Oil Cooler Hydraulic Linear Slider system Hydraulic Clamp Electrical panel safety lock and keyed panel lock Electric Panel Cooler Protected Against Overload

Condition: new, Year of construction: 2024, pipe diameter (max.): 76 mm, power: 3 kW (4.08 HP), warranty duration: 12 months, COUNTRY OF ORIGIN : TURKEY WARRANTY PERIOD :12 MONTHS Standard Hardware Self-memorizing NC Control display ensures professional and easy operation of the machine Pipe bending up to Ø 76mm x 3 mm The holder bracket supports the pipe when fixing it to the machine Kedovkublspfx Anwodn Blank holes for mounting special attachments Steel construction welded body Thermal - Power & Reset lamps Emergency stop button The machine has 500 internal program memory The minimum bending radius is 2 times the diameter (Ø) of the pipe (depending on the wall thickness of the pipe and the material) Ø 33.7 mm Standard 1 Set Pipe mold included User manual MODEL NBM 76 Minimum Diameter mm 80 Maximum Diameter mm 440 Operating Speed m/an> 7 Engine Power kW 4 Weight kg 260 Dimensions (L x W x H) 850 x 850 x 1050 Curling Capacity NBM 76 Thick Wall Tubes mm 76×3 Black Steel Pipe mm 70×5 Aluminum Pipe mm 76×6 Round solid tube (black steel) mm 45 Square tube (black steel) mm 50x50x5

Condition: new, Year of construction: 2024, pipe diameter (max.): 65 mm, bending angle (max.): 190 °, bending radius (max.): 250 mm, total length: 4,950 mm, total width: 1,250 mm, total height: 1,600 mm, warranty duration: 12 months, sheet thickness aluminum (max.): 3 mm, sheet thickness steel (max.): 3 mm, MAXIMUM CAPACITY : Ø65X3MM MAXIMUM BENDING RADIUS : 250MM DEGREE OF TWIST : 190 DEGREE WORKING LENGTH : 3000MM MOTOR POWER : 15.5KW LENGTH : 4950MM WIDTH : 1250MM HEIGHT : 1600MM BENDING SPEED : CHANGEABLE STANDARD FEATURES One set of bending molds in the dimensions required by the customer Servo Motorized Feed Axis Servo Motorized Rotation Axis Automatic Mailing of Detailed Work Report Servo Bending Axis (SFB 38-CNC/R1) Gearbox Driven Bending System (51-65-76-90) CNC Control Unit with mobile 21" color screen 3D Simulation Twisting Displaying Daily, Weekly and Monthly Total Production Amount Calculating the total length of material to be used Calculate the estimated bending process time Convert X-Y-Z data to Y-B-C Getting remote assistance Portable foot pedal with emergency stop Manual - Automatic Twisting Bending with - Without Bending Safety plate with switch behind the bending head Automatic headstock lubrication system (SFB 38 CNC/R1) Hydraulic Crimping Hydraulic Malafa Hydraulic Stop Hydraulic Oil Cooler Hydraulic Linear Slider system Hydraulic Clamp Electrical panel safety lock and keyed panel lock Electric Panel Cooler Protected Against Overload Kedpfxeu Hi Rqo Anwjdn

Condition: new, Year of construction: 2024, pipe diameter (max.): 38 mm, bending angle (max.): 190 °, bending radius (max.): 250 mm, total length: 4,280 mm, total width: 1,000 mm, total height: 1,500 mm, warranty duration: 12 months, sheet thickness steel (max.): 3 mm, MAXIMUM CAPACITY : Ø38X3MM MAXIMUM BENDING RADIUS : 250MM DEGREE OF TWIST : 190 DEGREE WORKING LENGTH : 3000MM MOTOR POWER : 7.5KW LENGTH : 4650MM WIDTH : 1000MM HEIGHT : 1500MM BENDING SPEED : CHANGEABLE STANDARD FEATURES One set of bending molds in the dimensions required by the customer Kdedou Hi T Ejpfx Anwen Servo Motorized Feed Axis Servo Motorized Rotation Axis Automatic Mailing of Detailed Work Report Servo Bending Axis (SFB 38-CNC/R1) Gearbox Driven Bending System (51-65-76-90) CNC Control Unit with mobile 21" color screen 3D Simulation Twisting Displaying Daily, Weekly and Monthly Total Production Amount Calculating the total length of material to be used Calculate the estimated bending process time Convert X-Y-Z data to Y-B-C Getting remote assistance Portable foot pedal with emergency stop Manual - Automatic Twisting Bending with - Without Bending Safety plate with switch behind the bending head Automatic headstock lubrication system (SFB 38 CNC/R1) Hydraulic Crimping Hydraulic Malafa Hydraulic Stop Hydraulic Oil Cooler Hydraulic Linear Slider system Hydraulic Clamp Electrical panel safety lock and keyed panel lock Electric Panel Cooler Protected Against Overload

Condition: new, 40 mm 8,5 U/min 120 mm Ksdpfxey H N I De Anwjdn roll diameter 152 / 162 mm engine output 1,1 kW connected load 400 V weight 395 kg Overall size 900x600x1100 mm Equipment / Accessories: - Two driven rollers - Manual delivery of the upper roller - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn different profiles are used

Condition: new, 50 mm Kjdpfjy H N Ikex Anwjdn 8,5 U/min 100 kN roll diameter 162 mm Drive 1,5 kW range L-W-H 1100x850x1350 mm weight 495 kg Equipment / Accessories: - Two driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - Footswitch - standard roller set

Condition: new, 40 mm 8,5 U/min 120 mm roll diameter 152 / 162 mm engine output 1,1 kW connected load 400/50 V/Hz hydraulic pump 1,1 kW 80 kN range L-W-H 900 x 600 x 1000 mm weight 470 kg Equipment / Accessories: - Three driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage Ksdjy H N H Tjpfx Anwsdn - The standard roller set is included. He can turn used different profiles