Used Durma Maschinen Gmbh Special Offer Panel Bender Bending Center for sale (92,714)

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 531 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. Crsdpfxoz Agv Ue Adrjh - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Condition: used, Year of construction: 2014, functionality: fully functional, MiniBendCenter RAS 79.05 Fully automatic panel bending center for small parts - General Information: Direct from manufacturer Manufacturer’s warranty Maintenance included Latest possible software version - General technical data (in mm): Blank length: 50–600 Blank width: 40–600 Sheet thickness max. (400 N/mm²), tool-dependent: 3.0 Upper beam stroke max.: 500 mm Minimum flange height (reference value, tool-dependent): 5 × s Max. flange height: 127 Weight of bending cell: 10 tons Weight of enclosure and electrics: approx. 2,027 kg Weight of machine elements: approx. 945 kg - Machine-specific data: Motor operated; 400V, 50/60 Hz, 3-phase Year of manufacture: 2014 Condition: Refurbished – good used condition - Machine Configuration: Bending cell: - Automatic sheet thickness adjustment - Automatic tool clamping - Blank scanner Main manipulator: - 3 servo motors for X, Y, Z axes - 1 servo motor for lower rotary axis + separate drive for rotary axis - Double sheet detection Tool changer: - 3 servo motors for X, Y, Z axes - 1 pneumatic swivel drive for rotary axis - Tool gripper - Two-level tool magazine - Automatic tool clamping in tool magazine Enclosure: Crjdpex Hyhuofx Adrjh - Bending cell, front and rear Mobile operating panel: - 18" Touch & More control Intelligent loading robot Combined camera-scanner system Analysis software Transfer table, Sauerfeld (52x9 mm) suction row (7x20 mm) Pallet station: - Roller conveyor and heavy-duty chain conveyor - 1 position for new pallets (parts to be processed) - 1 position for "pallet in process" - 2 positions for finished pallets (empty or with remaining parts) Curved transport conveyor with 6 connection stations Finished part output enclosure Complete tool set RAS CAM-Office software incl. SolidWorks license and 2-year maintenance contract - Sample images Sample video available on request -

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: PA12704, 110610702, PA12707, mobility: mobile, Badeer Fish Grading Machine – full documentation available in both Polish and English. The onboard computer operates on the MES - B'Logic software platform. It includes two modules: B'Logic Grading and a label design software B'Logic. The set includes: - CAB label printer - Feed hopper - Acceleration conveyor - Weighing machine - Sorting conveyor - PC computer The computer located next to the label printer at the machine is touchscreen. The main computer for setting product specifications (for the currently processed product) does not need to be positioned near the machine. Specification: - 100–120 fish per minute - Maximum fish size: Length – 350 mm, Width – 220 mm - Operating speed adjustable by user (as shown in the video) - Airborne noise: < 70 dB Machine dimensions: Grading section: Height: 1.3 m, Length: 4.417 m, Width: 1.050 m Conveyor belt width: 60.8 cm (S 800 seamless belt) Power consumption: 0.37 kW Steel quality: AISI 304 Motor: Worm gear drive Feed hopper: Height: 1.87 m, Length: 3.66 m, Width: 1.5 m Conveyor belt width: 45.6 cm Drum motor Codpfx Aoy Hiyasdrorh Power consumption: 0.37 kW Dynamic weigher: Belt width: 250/350 mm Product weight: up to 1 kg (possible calibration) Motor power: 0.18 kW Speed: 0.25 mm/s – 2.0 mm/s

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 2080092, Used CNC horizontal 5-axis twin-spindle double-table machining center Manufacturer: SW – Schwäbische Werkzeugmaschinen GmbH Type: BAW06-22 Year of manufacture: 2011 Machine No.: 2080092 Weight: approx. 16,000 kg Technical data: - CNC horizontal machining center - 5-axis design - Twin spindle - Double table - Travel ranges: - X-axis: 600 mm - Y-axis: 600 mm - Z-axis: 510 mm - Rapid traverse: up to 45 m/min - Tool interface: HSK-A63 - Spindle speed: up to 17,500 rpm Equipment: Machine with standard accessories. Availability: Cedpoz E Ddfsfx Adrerh Available in the short term.

Condition: excellent (used), functionality: fully functional, Low-speed shredder Cutting width – 150 mm Motor power – 2.2 kW Crsdoyf I N Aepfx Adrjh Rotor speed – 200 rpm Number of rotor blades – 9 pieces Number of stator blades – 2 pieces 4 units available, in perfect condition Capacity up to 25 kg/h Price: 1200 EUR per unit

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 1,000 mm, The horizontal machining centers in the XpertK series are characterized by their outstanding modularity. Choose from a variety of table variants and matching milling heads, complemented by a wide selection of spindles. The XpertK machines are ideal for special requirements where standard machines are not sufficient and offer customized flexibility and individuality Xpert K 3512 - Horizontal machining center - Series: Xpert K - Travel X/Y/Z: 3500 x 1200 x 1000 mm - Optional Y-axis: 1600 mm - Milling head: M-Series fork milling head Credpfx Ader H Hhnjreh - Spindle: 12,000 min-1 / 53 KW / 253 Nm - Tool holder: HSK-A100 - Control: Heidenhain TNC 640 - Clamping surface: 4,000 x 2,200 mm - Payload: 15,000 kg - Rapid traverse: 30 m/min - Acceleration: 3 m/s² Modularly expandable, further options: - Sliding table X-axis - Cross table X and W-axis - Rotary table X and C-axis (Ø 2,000 mm) - Table travel X-axis up to 6,000 mm - Table travel W-axis 1,200 mm - Movable work unit Y- (vertical), Z- (slide) and W-axis (1250 mm) - Milling and turning machining possible - 18 spindle variations - Clamping area can be extended up to 6,000 x 2,500 mm

Year of construction: 2018, condition: excellent (used), functionality: fully functional, machine/vehicle number: 10044/0218, !!! Detailní fotografie a produktové specifikace soutruhu TLI 10 naleznete v PDF souboru v příloze. !!! !!! TLI 10 SLOUŽÍ PRO OBRÁBĚNÍ VNITŘNÍCH A BOČNÍCH ČÁSTÍ PRSTENŮ !!! pro vnější obrobení nutno zakoupit stoj TL0 10, který nenabízíme Soustruhy jsou speciálně navrženy pro zpracování snubních prstenů a náramků. Oddělení vnitřního obrábění (TLI 10) a vnějšího obrábění (TL0 10) na dva stroje zajišťuje vysokou produktivitu. Veškeré potřebné soustružnické operace (rovinné obrábění, rádiusy, boční obrábění a srážení hran) lze provádět postupně bez nutnosti úprav nebo přestavby strojů. Technické parametry: TLI 10 Parametr Hodnota Codpfx Adjy S Sz Rererh Pohon 0,55 kW s elektrickou brzdou Napájení 380 V / 50 Hz Regulace otáček potenciometr Rozsah otáček 0–1400 ot./min Rozměry 100 × 70 × 130 cm Hmotnost 170–190 kg

Condition: used, Year of construction: 2004, machine/vehicle number: 0-240-14-3077, functionality: fully functional, power: 18 kW (24.47 HP), input voltage: 400 V, input current: 52 A, input frequency: 50 Hz, type of input current: AC, cutting height (max.): 125 mm, cutting width (max.): 4,300 mm, saw blade diameter: 450 mm, height adjustment type: electric, saw blade bore: 60 mm, actuation type: electric, rotational speed (max.): 4,500 rpm, rotational speed (min.): 3,800 rpm, total length: 10,216 mm, total width: 7,470 mm, total height: 2,200 mm, overall weight: 15,000 kg, table height: 1,020 mm, Equipment: CE marking, saw blade guard, scorer, For sale is a professional, industrial panel dividing saw from the premium manufacturer HOLZMA, from the high-performance 510 series. The system is of German manufacture ("Made in Germany") and is specifically designed for tear-free and dimensionally accurate cutting of large quantities of panels in an industrial multi-shift operation. As an HPL version, this system features fully automatic material feeding from the rear via a heavy-duty lifting platform, which minimizes cycle times and maximizes operator ergonomics. Technical data according to specification (HPL 510/43/22/L/D/X) Manufacturer: HOLZMA Maschinenbau GmbH Exact model designation: HPL 510 / 43 / 22 / L / D / X Cutting length (code 43): max. 4,300 mm Table width (code 22): max. 2,200 mm Saw blade overhang: 125 mm Main saw blade diameter: max. 450 mm Working height (table height): approx. 1,020 mm (adjustable via leveling feet) Overall height: approx. 2,100 – 2,200 mm (depending on terminal configuration) Control & Clamping System Machine control: Equipped with the proven, IPC-based high-performance control system HOLZMA CADmatic 4. This offers intuitive operation via graphic displays, plain-text error diagnoses, and an optimized cutting sequence visualization. Material clamps: The program slider is equipped as standard with 9 robust, two-finger HOLZMA clamps for gentle and highly precise package fixing. Electrical connection values & energy Operating voltage: 400 V (three-phase / three-phase AC) Mains type: 3~ + N Frequency: 50 Hz Rated current: 52 A Required fuse rating: 63 A, slow-blow Control voltage: 24 V Equipment and functional features Crodpfx Adszilz Nsroh Automatic cutting height control: The saw carriage automatically adjusts the overhang of the main saw motor (13.5 kW) and the scoring unit (2.2 kW) to the measured package height. Intelligent pressure beam (pneumatic): Variable opening height for a significant reduction in idle times between cuts. Heavy-duty lifting table feeding ("L"): Robust 4-column feeding system at the rear, designed for smooth handling of heavy panel stacks. Equipment packages ("D" & "X"): Extended machine equipment for optimized material flow, precise package stop, and high-performance cutting cycles. Important logistics and sales information Condition & Packaging: The machine has already been professionally dismantled and is completely packed, ready for loading. The professional transport securing of all sensitive axes, linear guides, and control components has been carried out in accordance with the manufacturer's specifications. Cost assumption: The loading and transport costs are not included in the purchase price and must be borne entirely by the buyer. Recommendations for local crane and transport services can be requested from us. We will assist with the collection as much as possible.

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, load capacity: 800 kg, - Stationary scissor lift table with single scissors - Steel perforated grid plate System 16 - Platform size: 2000x1000x100 mm - Hole spacing: 50 mm - Hole diameter: 16 mm - 360-degree rotary platform beneath the grid plate - Grid system with 4 stops every 90 degrees - Lift up/down operated by a hand control with 3 m cable - Battery-hydraulic drive - Load capacity: 700 kg - Construction height: 670 +/- 60 mm - Useful lift: 700 mm - Maximum height: 1370 +/- 60 mm - Own weight: approx. 810 kg - Stationary version with 4 base plates. Crsdpfexazzyex Adrjh

Year of construction: 2024, condition: new, Manufacturer: DURMA Type: MS 2504 Year of manufacture: 2022 Cedpfx Adsd R Er Derorh Cutting length: 2550 mm Sheet thickness: 4 mm Control system: EZM9910 Operating hours: 0 Cutting angle: 1°30 Number of strokes per minute: 42 Motor power: 7.5 kW Rear gauge range: 750 mm Table width: 450 mm Table height: 800 mm Dimensions L/W/H: 3200x2300x1350 mm Weight: 3780 kg Standard equipment Control unit EZM9910 Rear gauge range 750 mm, programmable via the control unit Plastic inserts for the hold-down device 1 side gauge and 2 sheet support arms Finger guard Portable foot switch with emergency stop Spring-loaded flap gauge in the T-slot of the support arms Ball screw Table plates with ball bearings Upper blade with 2 cutting edges Lower blade with 4 cutting edges CE marking Extended equipment Adjustable angle gauge 0-180° The machine can be inspected and demonstrated at our showroom in Staufenberg at any time by appointment. Other machines are available for demonstration at our facility in Staufenberg. Upon request, we will be happy to provide you with further information.

Year of construction: 1979, condition: used, Additional title: wort cooler Capacity: 150 hl/h Pressure: 6 bar Max. temperature: 100 °C Length: 2550 mm Crsdovcqtzopfx Adroh Width: 900 mm Height: 2000 mm Weight: 1080 kg Material: stainless steel Base construction: on frame Features: 2-stage, connection widths: DN65 (wort, water) and DN80 (ice water) Periphery: wort aeration, mixing pump, booster pump (water),

Condition: excellent (used), For sale: a Karl Tränklein Case Bender, a machine designed for shaping and bending the spines of hardback book covers. The device gives the covers the appropriate curvature, ensuring a perfect fit to the book block. The machine is equipped with adjustable rollers, allowing for adaptation to different cover thicknesses. The robust cast iron construction ensures high precision and long-lasting durability. Technical data: Manufacturer: Karl Tränklein Type: Case Bender / spine forming machine Working width: approx. 600 mm Adjustable roller pressure Stable cast iron construction Electric drive Work table Condition: used Applications: Production of hardback books, Bookbinding, Printing companies, Graphic arts companies, Crodpsziwnbsfx Adreh Production of albums, catalogs, and covers.

Year of construction: 1990, condition: used, Capacity: 250 hl/h Pressure: 16 bar Length: 3.000 mm Width: 750 mm Height: 2.246 mm Weight: 3150 kg Crodpfszty Hnex Adroh Material: plates: 1.4404/0,8mm 196 WAP, 59 HHP, 3 AP / seals: Perbunan PRESS IN Base construction: clamping screw cap NIRO pedestal Features: 4-stages (heater, hot holding section, regenerative heat exchanger, pressure reduction), connections: DN65

Year of construction: 2024, condition: new, Manufacturer: DURMA Model: MS 3004 Year of manufacture: 2024 Cutting length: 3100 mm Sheet thickness: 4 mm Control system: EZM9910 Operating hours: 0 Crjdpfed R Emfex Adroh Cutting angle: 1°30 Strokes per minute: 42 Motor power: 7.5 kW Rear gauge range: 750 mm Table width: 450 mm Table height: 800 mm Dimensions L/W/H: 3700x2300x1350 mm Weight: 3780 kg Standard equipment Control unit EZM9910 Rear gauge range 750 mm, programmable via control unit Plastic inserts for the hold-down device 1 side gauge and 2 sheet support arms Finger guard Portable foot switch with emergency stop Spring-loaded flap stop in the T-slot of the support arms Ball screw Ikh7877 Table plates with ball rollers Upper blade with 2 cutting edges Lower blade with 4 cutting edges CE marking Extended equipment Adjustable angle stop 0-180° The machine can be inspected and demonstrated at any time in our demonstration center in Staufenberg, by prior appointment. Other machines are available for demonstration at our location in Staufenberg. Upon request, we will gladly provide you with further information.

Condition: new, functionality: fully functional, overall weight: 5,800 kg, total length: 5,000 mm, total width: 1,250 mm, total height: 650 mm, Year of construction: 2025, fork length: 5,000 mm, load capacity: 5,000 kg, Transport carriage 1250 x 5000 mm with payload 5000 kg Tires bandages wheel Steering is a slewing ring with fork tine holder Cjdpfxsv Hnnkj Adrsrh Side stanchions optional Support feet on the front for setting down the carriage

Condition: used, Year of construction: 1992, machine/vehicle number: 150258, Offer 24348 Technical data: - Infinitely variable pressure capacity 15 t - Infinitely variable stroke 150 mm - Mandrel bending device up to 6000 mm - Mandrel bending angle 180 ° - Drive 400 V / 4 kW - Space requirement approx. W 1500 x H 1200 x D 1100 / 7500 mm - Weight approx. 1500 kg - Bending capacity - Bending capacity horizontal bending flat bars 120 x 10 mm Codpfx Asut Uiqedrorh - Tube bending ( pressing process ) up to approx. 11/2 " - Mandrel bending up to 42 mm - Bending tools - Tube bending tools Horizontal bending - Mandrel bending tools steel approx. 21.3 R 50 ; 26.9 R 57 ; 30 R 67 ; - 33.7 R 72.5 ; 42.4 R 92.5 ; mm - Mandrel bending tools plastic approx. 10 R 60 ; 12 R 65 + 85 ; 17.2 R 100 - 28 R 65 ; 33.7 R 120 ; 36 R 100

Year of construction: 1991, condition: reconditioned (used), Mubea / Muhr and Bender BB 032 P200: - rebar bending machine with electr. steering Crodpsium Eujfx Adreh - Saving of bending programs with up to 10 different angle sizes - Memory for up to 200 bending programs Special tools and devices on request. Trade-in of used machines. Europe-wide delivery possible.

Condition: used, Year of construction: 2000, Insulated, steam-heated V4A stainless steel tanks, most recently used as CIP cleaning tanks. Credpfx Adszty H Isroh Additional title: vertical, conical stainless steel tanks Capacity: 3000 l/tank Width: 1,55 m Height: 3 m Weight: 600 kg Material: V4A stainless steel Position: vertical, standing on feet Base construction: cylindrical tanks with dished top and conical bottom Features: 2 stainless steel tanks 30 hl each, insulated, heatable by steam

Condition: like new (used), Year of construction: 2023, Technical data: Double bending machine Working length: 8200 mm Bending capacity: 2.5 mm CNC control Sheet metal cutting device Back gauge depth: 1250 mm Bending accuracy: +/- 0.5° Bending range: 140° Multi-zone crowning system Credpszz Adfjfx Adrsh Bending die width: 10/20 mm Number of gripper fingers: 9 pcs. CE marking Dimensions (length x width x height): approx. 10200 x 2300 x 2150 mm Weight: approx. 12.5 tons Accessories: Sheet metal cutting device Hydraulic unit with oil cooler Bending die lighting Various tools The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty. Condition: overall in new condition

Condition: new, functionality: fully functional, Year of construction: 2026, control type: manual, degree of automation: manual, actuation type: manual, bending angle (max.): 130 °, overall weight: 430 kg, warranty duration: 24 months, Sheet Metal Bending Machine / Brake - Bender 3100mm - RG-C 3007 + Cutter RC-0.8 3-Meter Sheet Metal Bender – Professional Solution for Roofing contractors Our 3-meter sheet metal bender is a high-quality machine designed for roofing contractors and companies specializing in sheet metal processing who value precision, durability, and ergonomic operation. With its robust construction and precise craftsmanship, it ensures reliability and ease of use even under intensive working conditions. Key Features: ✅ Working length: 3 meters – allows bending of large metal sheets, increasing work efficiency. ✅ Sturdy steel construction – guarantees longevity and resistance to deformation. ✅ Precision bending – perfect for producing roofing elements, sheet metal trims, and gutters. ✅ Easy operation – an intuitive control mechanism enables quick and accurate sheet shaping. ✅ High clamping force – stabilizes the material, ensuring uniform bending along the entire length. Our 3-meter sheet metal bender is an indispensable tool on any construction site, improving the quality and efficiency of roofing work. Codpev Ax N Dofx Adrjrh 3-Meter Sheet Metal Bender – Technical Specifications Maximum bending length: 3100 mm / 122" Maximum bending capacity: Steel sheet: up to 0.7 mm Aluminum sheet: up to 1.0 mm Copper and zinc sheet: up to 1.0 mm Maximum bending angle: 130° Bending beam thickness: 30 mm Maximum clamping beam lift height: 80 mm Overall dimensions: 3460 x 900 x 1200 mm Weight: Approx. 450 kg (varies depending on configuration) Clamping system: Manual with high clamping force for stable operation Construction: Heavy-duty steel frame ensuring durability and precision Accessories (included): Back support arms for large sheets Functional protractor for precise angle bending Roller cutter / shear - for quick and precise cutting of sheet metal along the working length of the bending machine Optional accessories (not included): Swivel castors with brake - (4 pcs.) - €160.00 This 3-meter sheet metal bender offers precision, durability, and ease of use, making it an ideal choice for roofers and professionals who demand reliable performance in sheet metal forming. Contact us for more information and to find the perfect model for your needs! FREE SHIPPING TO GERMANY. Shipping costs to other countries on request.

Condition: like new (used), Year of construction: 2014, functionality: fully functional, GHD Georg Hartmann Maschinenbau GmbH, SELECTRA 25, 2014, good condition. Capacity: Up to 3000 products /h Product dimensions: Length: 160 - 400 mm, Height: 50 - 150 mm Power input: 5 kW Air: 6,0 bar Ready to ship Crodpfoylurksx Adroh

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 32026, compressed air connection: 9 bar, overall weight: 60 kg, input voltage: 230 V, warranty duration: 12 months, Dry Ice Blaster GR II New device 10 kg ice hopper capacity 3 mm pellets 5 meter blasting hose LED light on the gun 7 mm round nozzle 25 mm flat nozzle Crsdpfx Adsyh Hr Ssrsh 5 meter air hose Technical performance: 9 bar Max air flow: 4200 L/min Air pressure regulator: 1-9 bar Ice feed regulator: 0 - 70 kg ice per hour

Condition: good (used), Year of construction: 2018, Manufacturer: INDUCTAFLEX Type: AL-3e Control system: ACCURATE touch screen Year of construction: 2018 3 rolls driven servo Torq each roller 3500 nM Electrically support rolls Intelligent software : Ellipse program U Bend shapes control of tangents Cjdpjvd Dftofx Adrorh Auto section detector Specifications Metric US Standard Horizontal and Vertical Horizontal Axis Ø 105 mm Number of rollers 3 Stroke X axis 0 - 400 mm Dimensions (estimate) length 4500 mm width 3200 mm height 2700 mm weight 3300 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: new, Year of construction: 2025, functionality: fully functional, Simply Center Punch – The Center Marking Aid! A revolution in precision: We present the “Simply Center Punch” The world's only center marking device – an exclusive innovation from Northern Germany. The Problem No more inaccurate center marking of round parts - Are you familiar with the challenges of precisely center punching shafts or rods ranging from 15 mm up to 400 mm? - Inaccurate positioning. - Poor lighting conditions - No glasses for older users Credpfx Aexb Ucaedrsh - Time-consuming manual alignment - Inefficient and error-prone processes - The market does not offer a universal and reliable solution for varying diameters. Our Solution: Simply Center Punch – A World First! Simply Center Punch: Precision made simple. - Globally unique: A center punch device / center marking aid developed and utility model protected by us, setting new industry standards. - 100% in-house development: From the first concept to the finished product – all from a single source. - Manufactured in-house: We guarantee quality "Made in Germany." - Versatile use: For diameters from 15 mm to 400 mm. - Center marking at the push of a button: Simply position, turn the handle, and mark the center. Your Advantages at a Glance Your benefits. - Maximum precision: Centers drill holes and markings with accuracy up to 0.3 mm. - Saves time and money: Speeds up your workflow and reduces rework. - Effortless handling: Intuitive operation requiring no prior experience. – Weight just 780 g. - Universally applicable: One tool for nearly all diameters in mechanical engineering, metalworking, etc. - Robust and durable: Made from high-quality materials for professional, continuous use.

Condition: reconditioned (used), Year of construction: 2021, operating hours: 980 h, functionality: fully functional, total width: 2,500 mm, overall weight: 19,000 kg, power: 280.23 kW (381.01 HP), year of last overhaul: 2025, VZ 850 DK, Volvo Penta TAD16, 770 hp, 3300 operating hours Crsdpfxow S Iiie Adrjh - Conveyor belt in new condition, rollers renewed - Shredding shafts 7/7-5, made of metal - Crushing bar with comb - Counter comb in new condition - Two hoppers - Long discharge conveyor - CAT engine C9.3 - Emissions standard EPA Tier 4 final - Only 980 operating hours