Used Eckold Ha 500/2 + Mz for sale (91,197)

Condition: used, Year of construction: 2009, Fröling Turbomat 500 – Wood Chip Biomass Boiler (2009) ⚙️ Technical Data • Model: Fröling Turbomat 500 • Year of manufacture: 2009 • Rated output: 450 kW (W40) • Maximum output: 495 kW • Water capacity: 750 liters • Operating pressure: 6 bar • Max. temperature: 110 °C • Weight: approx. 6,800 kg • Manufacturer: Fröling Heizkessel- und Behälterbau GmbH – Austria ⸻ 🔩 Key Features • Fully automatic ash removal and heat exchanger cleaning • Four-layer, refractory high-temperature combustion chamber with chamotte lining • Water-cooled feed channel – suitable for fuels with higher moisture content • Stoker grate with continuous, efficient fuel combustion • Lambda control system with multi-zone air management and low emissions • Automatic draft and induction fan control • Heavy-duty industrial construction, maintenance-friendly design • Fuels: Wood chips (G30–G50), pellets, sawdust, biomass ⸻ 💡 Advantages • High efficiency, fully automatic operation • Low maintenance requirements, long service life • Reliable performance even with fuels with higher moisture content • Ideal for industrial and municipal heating systems ⸻ 📍 Location: Mosonmagyaróvár, Hungary TOP HEATING SYSTEMS – Used heating systems, boilers, heat pumps & accessories direct from stock Gujdsxmrwfjpfx Aqgjh We are a family business with around 20 years’ experience in the heating technology sector. We have a 1,500 m² warehouse in Mosonmagyaróvár, Hungary, with a continuously available stock of approximately 50–60 units. 📍 Location: Our warehouse is located in Mosonmagyaróvár, Hungary – about 15 km from the Austrian border and approx. 80 km from Vienna. Mosonmagyaróvár is the first major town on the Hungarian side after the Austrian border. 🔥 Our product range includes: • Wood chip boilers • Pellet boilers • Log wood gasification boilers • Log wood boilers • Biomass boilers • Oil and gas boilers • Heat pumps • Thermoventilators • Hot air blowers • Warm air heaters • Industrial heating systems • Buffer tanks • Heat exchangers • Auger conveyors • Discharge systems • Burners • Pumps • Comprehensive heating accessories ⚙️ Accessories and Components: We also carry a large selection of accessories, including circulation pumps, plate heat exchangers, and many other components – from residential to industrial solutions. 🏭 Brands in our range: Fröling, Hargassner, KWB, HDG, Binder, ETA, Herz, Guntamatic, Windhager, Viessmann, Buderus and many more. 🌐 Current Offers: Most of our current offers can be found on our website: topheatingsystems.com In addition, we have further units available that are not yet listed online. 📅 Viewing: Viewings at our warehouse are available by prior appointment. If you are interested, please contact us – we will be happy to help you find the right solution.

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: HBRes, ABUS HB overhead crane system with dimensions of approximately 10x5m (5m span). Multiple units available! – Extension of the rail tracks possible! Load capacity / lifting capacity: 500 KG – 0.5 tons Technical data of the system: Overhead crane system with ABUS HB160/200 rails. The system will be delivered complete: HB rails, rail connectors, trolleys, end plates, supports/hangers, etc. Includes 500KG ABUS/Demag chain hoist. Model depends on availability. Lifting height approx. 4m. The crane is disassembled and immediately available. Gsdpfeu I Uwxox Aqgsuh Used condition, see pictures. The item is located in 75053 Gondelsheim. Shipping via freight forwarder or collection only by prior arrangement. Demag KBK1, KBK2, and KBK3 rails are in stock! Other KBK systems are also available. Load capacity 125KG - 1600KG. Please request a non-binding quote for your overhead crane system with the required load capacity and dimensions.

Condition: reconditioned (used), Year of construction: 2010, functionality: fully functional, fuel type: electric, color: red, empty load weight: 56 kg, Equipment: second-hand vehicle warranty, HAKO HAMSTER 500 E SWEEPING MACHINE NEW MWP 12V 12Ah BATTERIES (x4) Manufactured in 2010 A new cylindrical brush combined with a new side brush provide excellent sweeping results. New rubber guards around the main roller ensure dust-free sweeping. Gujdpfjzlxirex Aqgjh High surface coverage of up to 2,400 m²/h. The machine is in perfect visual and technical condition. The device has undergone a complete, meticulous overhaul. Each device we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Power supply: battery-powered Theoretical capacity (m²/h): 2400 Working width (mm): 400 Working width with 1 side brush (mm): 600 Dustbin capacity (l): 40 Working speed (km/h): 4 Filter surface area (m²): 1.1 Weight ready to use (kg): 56 Dimensions (L x W x H) (mm): 800 x 700 x 600 INCLUDED: NEW MWP 12V 12Ah BATTERIES (x4) New cylindrical brush New side brush Built-in charger for batteries New roller cover rubbers Waste container

Condition: excellent (used), For sale: Mannesmann Dematic AG electric chain hoist, model DKUN 5-500 K V2. A robust, industrial-grade hoist manufactured in Germany, designed for lifting loads. The chain and hook, as shown in the photos, are included. Technical data: Manufacturer: Mannesmann Dematic AG Type: DKUN 5-500 K V2 Lifting capacity: 1/1 – 0.50 t / 2/1 – 1.00 t Lifting speed: 15.0 / 7.5 m/min Motor power: 1.40 kW Power supply: 380–400 V Frequency: 50 Hz Current: 4.00–4.20 A Motor speed: 2720 rpm Protection class: IP55 Chain: 5.3 × 15.2 8DK Factory number: 63159709 Ident-No.: 836 334 44 Year of manufacture: 2000 Weight: approx. 39 kg Country of manufacture: Germany Condition: Used hoist, in the condition shown in the photos. Important information: one of the mounting bracket elements is partially broken off, which is clearly shown in the photos. This damage does not affect the operation or functionality of the hoist. Gusdpfxez Sny Eo Aqgjh Sold exactly as shown in the photos. PRICE INDICATED IS FOR 1 UNIT.

Year of construction: 2018, condition: used, There are six Arburg ALLROUNDER 320C 500-170 available, year of manufacture: 1x 2006, 1x 2008, 2x 2012, 1x 2013, 1x 2018, an on-site inspection is possible. Godpfx Aqoz Sr Rnegeuh

Condition: used, Pay-off and Take-up Decoiler KEMMERICH / STANGE Type HA 1500 / 500 Serial No. 51673 Year of Manufacture: 2023 (unused) Maximum coil weight: 1500 kg Coil width with guide arms: 500 mm Coil width without guide arms: 670 mm Coil inner diameter: 300 - 370 mm Coil inner diameter with extension jaws: approx. 380 - 440 mm Decoiler turntable diameter: Ø 2080 mm Coil outer diameter without pressure arm: max. 2350 mm Coil outer diameter with pressure arm: max. 2200 mm Center of turntable to decoiler base: 1200 mm Decoiler shaft, support shaft: Ø 70 mm Speed: approx. 1.5 to 20 rpm Gsdjua Nngepfx Aqgsuh Motor power: 1.1 kW Power supply: 400 Volt, 50 Hz - stepless turntable speed adjustment via frequency converter - loop switch / proximity switch for decoiler STOP - central expansion via hand crank - clockwise and counterclockwise rotation - pneumatic pressure arm with running roller - 4 guide arms, 870 mm each - 4 plastic extension jaws for adapting the turntable Space requirement (L x W x H) Weight: 970 kg Very good condition

Condition: used, Year of construction: 2021, operating hours: 39,900 h, clamping force: 750 kN, displacement volume: 2,863 cm³, injection pressure: 1,870 bar, overall weight: 32,000 kg, screw conveyor diameter: 90 mm, terms of delivery: EXW (ex Works) delivery time: on request Gusdoz H Aicepfx Aqgsh terms of payment: 100% prior to delivery

Condition: excellent (used), Year of construction: 2013, operating hours: 2,500 h, functionality: fully functional, machine/vehicle number: R1203433 Pos 1000, overall weight: 365 kg, rotor diameter: 400 mm, rotor width: 320 mm, opening width: 340 mm, input voltage: 400 V, power: 22 kW (29.91 HP), A very robust hammer mill from Alpine with grate bars for crushing soft to medium-hard materials. The mill is supplied with an inlet hopper and a device for pneumatic extraction. A control panel is not included. Machine data: 365 kg; 2800 RPM, 22 kW Rotor 400x320 mm, cast iron rotor, inlet 340x150 mm, Design with grate bars 4 rows of hammers, 5 hammers per row Gusdpfx Aszl E N Eoqgoh The machine was in operation at an R&D center in Israel. As the company now operates a production facility in the Netherlands, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in the Netherlands. The details for optimal transport need to be clarified. The machine price does not include packaging on a pallet.

Condition: good (used), Eckold tool ECKOLD - FWA802T Gedpfjzdggdex Aqgeuh Eckold elastic forming tool FWA 2 mm MACH-ID 3807 Make: ECKOLD Type: FWA802T Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Eckold tool ECKOLD - FWA 602 Eckold elastic forming tool FWA 2 mm MACH-ID 3804 Make: ECKOLD Type: FWA 602 Year: 1990 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Gujdpfx Aszdggqoqgeh

Condition: excellent (used), Weishaupt G30 gas burner 5000kw 2017 model Gsdpfowiqliox Aqgjuh

Condition: good (used), Year of construction: 2001, total width: 680 mm, total length: 1,215 mm, total height: 1,740 mm, sheet thickness aluminum (max.): 2 mm, overall weight: 505 kg, sheet thickness steel (max.): 1 mm, Eckold Kraftformers Piccolo ECKOLD - KF 324 Eckold Kraftformer; motorised machine for Shrinking, Stretching, Doming, Planishing, Reforming, Flattening, Straightening For Aircraft production and Maintenance. For Car body shop specialists Gsdpfx Aqjz Ha Agsgeuh For Artisans and Craftmen Equipped with tool storage shelf in side column Machine equipped for tooling: FWR 402S FWA 403S Number of strokes: 400Min. Maximum sheet thickness: 2,0mm Horizontal troath: 340mm Vertical troath: 245mm Max. thickness Stainles: 1,5mm Max. thickness Aluminium: 2,5mm Manuel / Hand ram adjustment:32 mm Power: 1,5kW Length: 1215mm Width: 680mm Height: 1740mm Weight: 505kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2020, operating hours: 2,563 h, power: 192 kW (261.05 HP), Equipment: air conditioning, all wheel drive, cabin, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle on a non-binding basis, subject to finalization, errors, typographical errors, and prior sale: Fendt Rogator 655D sprayer Registration date: May 20, 2021 Production unit: .563 Pump hours: 1,500, sprayer hours: 695 Transmission: 40 km/h 2 rotating beacons 8 headlights at the top front, 6 headlights at the bottom front Work lights at the top rear Full cab with air conditioning, Category 4 Joystick control 2 monitors / Varioterminal 10.4" 2 camera systems Air conditioning Radio, Bluetooth, USB port, hands-free phone system 2nd seat Refrigerator and warming cabinet 3" suction hose 3" high-performance pump system Stainless steel centrifugal pump 785 L/min 5-way valve, stainless steel, electric 1 Agromie basic package Contour Assist 2 water connections on the driver's side at the bottom for supply and drainage 2 partial widths 18 and 36 m / nozzle bar Dualtec 2+2 Rinsing gate Electric tank level sensor Spray nozzles 0.5 at the front + fertilizer nozzle behind it Nozzle XRC11003-VP set, 75 pcs 2 sensors on each side for slope compensation Large tank 6,000 L, rinsing tank 500 L Air compressor with pneumatic system Godpjz Edlvofx Aqgsuh Mechanical ground sensor Optisonic boom height control Variable Tecontrol Varioguide RKT Novatel Emergency steering Optisonic height control Central lubrication Hand wash tank and soap dispenser on the driver's side at the bottom Small storage compartment under the cab on the driver's side Retractable step with storage area Storage compartment on the passenger side at the bottom Both axles steerable Trailer coupling 2-wheel, 4-wheel Tires: Allianca Agriflex IF 480/80R50, front approx. 60%, rear approx. 80% 2 track widths, Optitrac hydraulic track adjustment Price: € 165,000.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to a value of € 10,000 is the local court of Ludwigslust; for disputes exceeding this value, it is the regional court of Schwerin. Errors, typographical errors, and prior sale are subject to change.

Condition: excellent (used), functionality: fully functional, control type: manual, working width: 500 mm, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 3 mm, Sheet width - max. 500 mm Sheet thickness: 3 mm Gujdewvvvgjpfx Aqgeh Blade length: 500 mm

Condition: new, capacity 90 degrees: round 500 mm capacity 90 degrees: square 420 mm 600x400 saw band length 5320x34x1,1 mm band speed 15 - 100 m/min table height 805 mm total power requirement 3,0 kW weight of the machine ca. 1,45 t dimensions of the machine ca. 1,72 x 2,5 x 2,5 m Double miter band saw, hydraulic semi-automatic, DGS 500/600 HA-I • miter left + right 60° • Frequency-controlled saw drive • 34 mm saw band height • Wear-free material support turntable, ball-bearing • To position the saw blade guides using a very wide linear guide • Strong, robust gearbox Guedjupxupopfx Aqgeh • Large chipboards • 2 integrated support rollers left and right • Removable chip tray (disinfection) • Free-standing control panel, safe and ergonomic • Storage space for tapes, consumables • Hydraulic cutting pressure control valve • Material height sensor (automatic cut start detection) • Preload super fast (front loading) • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Minimum cutting range from around 10 mm Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: ready for operation (used), machine/vehicle number: 90002, Kandula coil winding machine FDW 500/2 Max. spool: 200 x 300 mm Max. wire: 1.5 mm Gsdoyll Agjpfx Aqgsuh

Condition: excellent (used), functionality: fully functional, Year of construction: 2004, machine/vehicle number: WILres, DEMAG KBK crane sky crane runway dimensions approx. 10x6m Payload / lifting load 500 KG - 0.5 tons Technical data of the system: Crane runway made from Demag KBK2 rails The system is delivered complete: KBK rails, rail connectors, trolleys, end plates, cable carriers, holders/hangers, etc. Gedpfx Aey Hpbdjqgouh incl. Demag DK2 500KG chain hoist Crane is dismantled and available immediately Used condition, see pictures Item location is 75053 Gondelsheim Dispatch by forwarding agent or pick-up only by appointment Demag KBK1 KBK2 and KBK3 rails are stock items! Other KBK systems are also available. Payload 125KG - 1600KG Please inquire about your crane runway with cantilever load and dimensions.

Condition: excellent (used), bore depth 500 mm Guedpfexx A D Tex Aqgoh spindle speed: 1

Condition: reconditioned (used), Year of construction: 2013, functionality: fully functional, fuel type: electric, color: red, empty load weight: 56 kg, Equipment: second-hand vehicle warranty, HAKO HAMSTER 500 E SWEEPING MACHINE NEW MWP 12V 12Ah BATTERIES (x4) Manufactured in 2013 A new cylindrical brush combined with a new side brush provide excellent sweeping results. New rubber guards around the main roller ensure dust-free sweeping. High surface coverage of up to 2,400 m²/h. The machine is in perfect visual and technical condition. The device has undergone a complete, meticulous technical overhaul. Each device we offer has individually taken photos; you are buying exactly what you see. Power supply: battery-powered Theoretical capacity (m²/h): 2400 Working width (mm): 400 Working width with 1 side brush (mm): 600 Dustbin capacity (l): 40 Working speed (km/h): 4 Godpfx Ajzltzpsqgsuh Filter surface area (m²): 1.1 Weight ready to use (kg): 56 Dimensions (L x W x H) (mm): 800 x 700 x 600 INCLUDED: NEW MWP 12V 12Ah BATTERIES (x4) New cylindrical brush New side brush Built-in battery charger New rubber tires Roller cover Garbage tank

Year of construction: 1998, condition: ready for operation (used), Travel X/Y/Z: 2520mm/1550mm/300mm, max. sheet dimensions X/Y: 5040mm/1550mm, max. material thickness mild steel/stainless steel/aluminum: 12mm/6mm/3mm, max. workpiece weight: 330kg, positioning speed: 80m/min/80m/min/60mm/min, positioning accuracy: +/-0.01mm. Machine dimensions X/Y/Z: approx. 5650mm/3650mm/2100mm, weight: approx. 6600kg, operating hours: 29499h. Including Fanuc Laser-Model C1500. Documentation available. On-site inspection is possible. Gsdpfxev Ip R As Aqgsuh

Year of construction: 1990, condition: like new (used), Used Schuler hydraulic press for sale Brand : Schuler Schuler EB 2-500- 2.75-0.85 Gusdpfx Ajhcnxreqgsh H-frame hydraulic press Power ( ton ) : 500 tons Table dimensions ( x-y/mm) : 3000×1800 Slide dimensions ( x-y/mm) : 3000×1800 Stroke ( x/mm) : 850 Stroke per minute from 12 to 24 Control Siemens S7 New hydraulic presses for sale

Condition: good (used), mileage: 516,000 km, power: 368 kW (500.34 HP), first registration: 01/2019, fuel type: diesel, axle configuration: 10x4, fuel: diesel, gearing type: automatic, emission class: euro6, loading space volume: 16 m³, Year of construction: 2019, Equipment: air conditioning, central locking, cruise control, electric window regulation, power mirror, = Additional Options and Accessories = - Radio/CD player - Rotating beacon - Sun visor - Power Take-Off (PTO) = Notes = Scania G 500 10x4*6 sewer cleaning truck, Kaiser AquaStar 2 Kaiser AquaStar 2 Steel tank Fresh water tank, 1,800 liters Sludge tank, 14,500 liters Total tank capacity, 16,300 liters KAISER high-pressure water pump KDU148 with a jet volume of 400 liters per minute and a maximum water pressure of 200 bar KAISER water ring vacuum pump KWP3100i with a suction capacity of 3100 m³/h and a maximum vacuum of 0.85 bar Tilting intermediate compartment 1770 operating hours Remote control Last axle is a steering axle Aluminum rims Hydraulic tilting system 516,000 km Various work lights Various toolboxes made of stainless steel and plastic Hose holder Warning lights Beautiful 5-axle Scania G 500 sewer cleaning truck with a Kaiser AquaStar 2 steel body, built for high quality, low weight, and ease of use. The vehicle is equipped with a KAISER high-pressure water pump KDU148 with a jet volume of 400 liters per minute and a maximum water pressure of 200 bar, and a KAISER water ring vacuum pump KWP3100i with a suction capacity of 3100 m³/h and a maximum vacuum of 0.85 bar. No additional accessories. The vehicle is in excellent condition. = Further Information = Godpjznlkuefx Aqgsuh Transmission Transmission: Automatic Axle Configuration Front axle 1: Aluminum rims; Steered Front axle 2: Aluminum rims; Steered Rear axle 1: Aluminum rims Rear axle 2: Aluminum rims Rear axle 3: Aluminum rims; Steered Weights Unladen weight: 21,050 kg Payload: 23,950 kg GVWR: 45,000 kg Functional Body brand: Kaiser AquaStar 2 Condition Technical condition: good Optical condition: good

Condition: used, Year of construction: 1993, machine/vehicle number: HZ668, DEMAG KBK 2 – Overhead Crane System, Bridge Crane, Hall Crane The images show an example overhead crane system with the components listed below. These components are also available individually! Please request a quote for your overhead crane system, tailored to your specific dimensions. Load capacity / lifting capacity from 80, 125, 250, 500 up to 1000 kg. KBK 2-R left-hand switch (with collector line) KBK 2-R swivel disc, 2000 mm (with collector line and electric swivel function) 71515146 KBK 2-R curved rails 15, 30, 45, 60, 90 degrees (with collector line) KBK 2-R rails (with collector line) The system can be delivered completely according to your requirements. Rails, rail connectors, trolleys, end plates, cable carriers, supports/hangers, and accessories are available. Gjdpfx Aqoy Ufddegeuh Chain hoists available upon request. Very good, used condition. Shipping via freight forwarder is possible. Demag KBK1, KBK2, and KBK3 rails are in stock!

Condition: excellent (used), Year of construction: 2013, Eckold tool ECKOLD - FWA402S Shrinker jaws for 1.5 mm steel 40 mm round MACH-ID 6884 Make: ECKOLD Type: FWA402S Year: 2013 Length:300mm Width:150mm Height:150mm Weight:20kg Gedpfxjzc H H Ue Aqgjuh Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1993, total width: 680 mm, total length: 1,215 mm, total height: 1,740 mm, sheet thickness aluminum (max.): 2 mm, overall weight: 505 kg, sheet thickness steel (max.): 1 mm, Eckold Kraftformers Piccolo ECKOLD - KF 324 Eckold Kraftformer; motorised machine for Shrinking, Stretching, Doming, Planishing, Reforming, Flattening, Straightening For Aircraft production and Maintenance. For Car body shop specialists For Artisans and Craftmen Equipped with tool storage shelf in side column Gedpfx Ajz Ha Dkoqgeuh Machine equipped for tooling: FWR 402S FWA 403S   Number of strokes: 400Min. Maximum sheet thickness: 2,0mm Horizontal troath: 340mm Vertical troath: 245mm Max. thickness Stainles: 1,5mm Max. thickness Aluminium: 2,5mm Manuel / Hand ram adjustment:32 Power: 1,5kW Length: 1215mm Width: 680mm Height: 1740mm Weight: 505kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!