Used Elf Zmc2 for sale (726)

Condition: good (used), Logitrans ELF1001/920 Mobile Paper Stack Lifter This device is in very good condition. Purchased from a small printing company, it’s practically unused. Hydraulic drive, built-in battery, and charger. Battery-powered. Laedpfjzladksx Acfof The stack lifting and lowering cycle is controlled from a mobile console that can be attached magnetically to the workstation or via the control on the device’s drawbar, ensuring fast operation. Load capacity: 1000 kg. Made in Denmark. Pallet/sheet dimensions: 785 x 1150 mm Lifting height: 920 mm. The device can be used as a stack lifter for a machine or as a standard high-lift pallet truck.

Condition: excellent (used), Year of construction: 1997, total length: 6,060 mm, total width: 2,440 mm, total height: 2,590 mm, Welfit Oddy ISO 20FT Tank Container 23,820L / 1-compartment IMO-1 Bottom discharge Steam heating 5-Year CSC inspection valid until 09-2028 = Further Information = General Information Year of manufacture: May 1997 Model year: 1997 Suitable for: Chemicals, construction water, fuel, wastewater, and effluent Weights Tare weight: 3,860 kg Payload: 30,140 kg Gross weight: 34,000 kg Lsdpfx Acsyu Iggofoaf Functional Compartment volume: 24,690 l Body make: Van Hool 24,690L TC, 2 compartments (12,290L/12,400L), L4BN, IMO1, T11 Number of compartments: 2 Condition Technical condition: very good Visual condition: very good Further Information Please contact Arne Honingh for more details.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, tank capacity: 26,000 l, usable tank capacity: 26,000 l, total length: 6,060 mm, total width: 2,440 mm, total height: 2,590 mm, overall weight: 36,000 kg, wall material: stainless steel, number of chambers: 1, manhole diameter: 500 mm, operating temperature: 140 °C, operating pressure: 4 bar, pressure (max.): 6 bar, Stainless steel V4A tank container with a domed top lid, 50 cm in diameter, and a 3-inch BSP bottom outlet, which corresponds to 7.5 cm. Insulated, cleaned (and can be heated). Walkways on top. Empty weight approximately 3.7 tons. Two identical units available. Located in Antwerp. Archive photos, original photos, and data sheets are available upon request and can be sent by email. All information is provided without guarantee, subject to errors and prior sale. Lajdpfx Aeydl A Dscfof

Condition: excellent (used), Year of construction: 2000, total length: 6,060 mm, total width: 2,440 mm, total height: 2,590 mm, 2000 WELFIT ODDY 20FT ISO tank container 24,900L / 1-compartment / safety rail T11 22K2 steam heating bottom discharge Payload: 32,220kg Lajdpfjzcpqpex Acfof Design temperature: -40/+130 degrees DIN 17441: 1.4401 valid for 5 years + CSC inspection until 03-2027 = Further information = General information Year of manufacture: May 2000 Model year: 2000 Usable material: Chemicals Weights Tare weight: 3,780 kg Payload: 32,220 kg GVW: 36,000 kg Functional Load compartment volume: 25,000 l Body brand: CIMC 2016, 20FT, 25,000L, L4BN, UN Portable, T11, steam heating, bottom discharge, 5Y: 10/2022 Number of compartments: 1 Condition Technical condition: very good Optical condition: very good Further information Please contact Arne Honingh for further information.

Condition: excellent (used), Year of construction: 2002, Fröling boiler Output: 1250Kw Laodsmnqhrjpfx Acfef Year: 2002 Burner: Gas or oil burner available on request

Condition: excellent (used), Year of construction: 1997, total length: 6,060 mm, total width: 2,440 mm, total height: 2,590 mm, Welfit Oddy ISO 20FT Tank Container 23,820L / 1-Compartment UN PORTABLE T11 Bottom discharge Steam heating 5-Year + CSC inspection valid until 09-2028 = Further Information = General Information Year of manufacture: May 1997 Model year: 1997 Suitable materials: Chemicals, construction water, fuel, waste water, and sewage Weights Tare weight: 3,820 kg Payload: 24,930 kg Gross vehicle weight: 36,000 kg Functional Interior capacity: 24,690 l Body manufacturer: Van Hool 24,690L TC, 2 compartments (12,290L/12,400L), L4BN, IMO1, T11 Number of compartments: 2 Condition Technical condition: very good Visual condition: very good Laedpfozap R Rox Acfjf Further Information Please contact Arne Honingh for further details.

Condition: good (used), Technical data for the clothes rail: Shelving system: Stow Type: Stowshelf The scope of delivery includes: 01x clothes rail, used Total width: 1,258 mm for bay width: 1,265 mm Tube dimensions: 30 x 15 x 0.60 mm Weight per unit: 0.36 kg Material color: sendzimir galvanized 02x Bracket, used Total depth: 598 mm f. Stand depth: 600 mm Total height: 55 mm Material thickness: 1.5 mm Weight per unit: 0.51 kg Material color: sendzimir galvanized Lodeul Slmopfx Acfsaf Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: good (used), Technical Data for Shelf Racking: Racking System: Stow Type: Stowshelf Technical Data for Assembly: Number of rack rows: 01 pcs. Rack length: approx. 6,535 mm Number of levels incl. ground level: 05 pcs. Number of bays per rack row: 01 pcs. at 1,265 mm Scope of Delivery Includes: 06x Upright frames, used Material finish: Sendzimir galvanized Frame profile dimensions: 35 x 50 x 1.0 mm Adjustment pitch: 25 mm Incl. base plates The uprights are pre-assembled 2,500 mm high 600 mm deep 25x Shelves, used Material finish: Sendzimir galvanized Dimensions: 1,265 x 600 x 30 mm 100x Shelf supports, used Material finish: Sendzimir galvanized For mounting the shelves 02x Cross braces, new Material finish: Sendzimir galvanized For stabilizing the shelf racking Your contacts in our company: Mr. Andre Evering Ljdpfx Asym Sybjcfoaf Mr. Mario Klöver Mr. Falk Deutsch General Information about the Item: This item is offered for collection only. Transport or shipment of this item beyond collection is subject to additional charges, which can be requested from us depending on the delivery location or scope of delivery.

Condition: excellent (used), Year of construction: 1997, total length: 6,060 mm, total width: 2,440 mm, total height: 2,590 mm, Welfit Oddy 20FT ISO Tank Container 23,950L / 1 compartment IMO-1 Bottom discharge Steam heating DIN 17440 1.4401 22T6 2.5Y-+ CSC inspection valid until 09-2028 = Further Information = General Information Year of manufacture: May 1997 Model year: 1997 Suitable materials: Chemicals, construction water, fuel, wastewater Weights Lasdpfoy Sxg Hex Acfsf Tare weight: 3,840 kg Payload: 30,160 kg Gross weight: 34,000 kg Functional Cargo compartment volume: 24,690 l Body manufacturer: Van Hool 24,690L TC, 2 comp. (12,290L/12,400L), L4BN, IMO1, T11 Number of compartments: 2 Condition Technical condition: very good Visual condition: very good Further information Please contact Arne Honingh for more information.

Condition: used, Used biodiesel plant made by Biodiesel Fuels Equipment Ltd UK in 2012 and shut down in 2021. Lodpfx Ajyhc Rgocfeaf Plant capacity is 10,000 litres/8 hour day up to 25,000 litres/day if run for 24hours. It has been used to process used sunflower and palm oil. Equipment includes: (3) separators, (2) reactors, (2) ionisers, (2) oil preparation vessels, (1) methanol preparation vessel, (1) tank for biodiesel.

Condition: good (used), Year of construction: 2001, total length: 7,150 mm, total width: 2,550 mm, total height: 2,670 mm, Welfit Oddy 20FT Tank Container Swap Body Capacity: 31,050L / 1 compartment Type: IMO-1, T7 Code: L4BN Bottom discharge Steam heating Insulated Payload: 32,020kg Design temperature: +130°C 5Y/CSC inspection valid until 08/2027 = Further Information = General Information Year of manufacture: May 2001 Model year: 2001 Weights Tare weight: 3,980 kg Payload: 32,019 kg Gross weight: 36,000 kg Functionality Internal volume: 30,850 l Body brand: Van Hool 20FT TC 30,850L, L4BN, IMO-4 Ledpfx Acjyyxapefeaf Number of compartments: 1 Condition Technical condition: good Visual condition: good Additional Information Please contact Arne Honingh for more details.

Condition: good (used), Marel Stainless Steel floor weighing scale Marel weigher indicator M2200-P02 110-230 Vac, 0.24-0.12 A Dimensions scale: 900 mm x 900 mm. Lodpfx Aox Il Ntecfjaf

Condition: used, The Eigenbau (Self-build) Perfect binder with PUR is a specialized binding machine designed for precise and efficient bookbinding. This machine is manufactured by Eigenbau and features a perfect binding mechanism with PUR (Polyurethane Reactive) adhesive, ensuring durable and high-quality binding. The machine has a format of 100 mm and is currently available in stock. It is located in Germany, and the price is available upon request. The delivery terms are FCA (Free Carrier), meaning the seller delivers the goods, cleared for export, to the carrier appointed by the buyer. Key features of the Eigenbau Perfect binder include a centering function for accurate alignment, a heating roller for optimal adhesive application, and a miniature circular saw for precise cutting. Additionally, it comes with a paper unwinding mechanism and a PLC (Programmable Logic Controller) for automated control. There is also an optional INATEC BS 25002 PUR system available for an additional 1500 EUR, which can enhance the binding process. The machine is equipped with an input station that includes a plate lifting station for efficient material handling. Format: 100 mm Equipment: Centering function Heating roller Mini circular saw Paper unwinding SPS control Optional INATEC BS 25002 PUR ( 1500 EUR extra) input station with plate lifting station Ledpfovfx Rtox Acfeaf

Condition: excellent (used), Year of construction: 1976, functionality: fully functional, Deckel FP1 FPS retrofitted tool milling machine with 3-axis Heidenhain digital readout. The machine is in very good condition and comes from a training department. Adjustable tilting table, SK 40 spindle taper. Accessories include various collets and arbor holders. In good, ready-to-use condition. Test run under power can be arranged by appointment. Laodjy Dz T Topfx Acfsf

Condition: good (used), Year of construction: 2008, functionality: fully functional, tank capacity: 24,000 l, total length: 6,060 mm, total width: 2,440 mm, total height: 2,590 mm, overall weight: 36,000 kg, wall material: stainless steel, number of chambers: 1, manhole diameter: 500 mm, operating temperature: 150 °C, operating pressure: 4 bar, pressure (max.): 6 bar, Tank container made of V4A stainless steel with a top manhole (access opening) with a diameter of 50 cm. Bottom outlet 3 inch BSP, which corresponds to 7.5 cm. Top walkways. The tank is insulated, cleaned, and leak-proof on all sides (pressure-tested). Location: Rotterdam. Transport quote available on request. All information provided without guarantee; subject to errors and prior sale. Lodjywd Tvopfx Acfsaf

Condition: used, D-6886-Delford Type SP 800 Laedpfx Acsc Nlxpofjf Delford SP800, Film wrapping machine, Packing materials: stretch films 12,5 – 25 micron (50-100 gauge) P.V.C. or any suitable heat sealable types. Max. roll with 450 mm, max. roll dia. 250 mm. Speed of operation: 40 – 80 packs per minute. Max. Packs sizes: L 300 mm, W 200 mm, H 120 mm, Girth 420 mm, Min. Packs sizes: L 130 mm, W 90 mm, H 10 mm, Girth 200 mm, Dimension: 5290 x 1049 x 1430. Machine weight: approx. 1400 kg.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, tank capacity: 31,000 l, total length: 7,820 mm, total width: 2,550 mm, total height: 2,670 mm, overall weight: 36,000 kg, wall material: stainless steel, number of chambers: 1, operating temperature: 130 °C, operating pressure: 3 bar, pressure (max.): 4 bar, overpressure (max.): 6 bar, empty load weight: 4,650 kg, pressure: 4 bar, temperature: 130 °C, Equipment: type plate available, Tank container made of stainless steel V4A with one manhole cover 50 cm and a second manhole cover also 50 cm (or 30 cm). Bottom outlet 3-inch BSP, equivalent to 7.5 cm. Insulated (10 cm polyurethane), cleaned, (can be heated). Location: Rotterdam. Delivery possible. Photos are archive images; originals available upon request. All information is given without guarantee; errors and prior sale excepted. Laodpfxsufgkvs Acfsf

Condition: new, Éclairs, profiteroles, meringue, and similar products on 600/400 trays; can process all soft doughs such as macarons (with pump head); can also deposit eccentric round biscuits (rotating nozzles); capable of dosing biscuit dough as a layer in a baking tray. Machine description: • Structure in stainless steel and aluminum • PLC with storage for up to 400 programs • 7-inch color touch screen • Electronic regulation of the dosage rollers' speed • Electronic regulation of the conveyor table in both directions • Plate transport: automatic, automatically moves to the next plate with counter • Automatic machine start as soon as it detects the plate • The machine is fully shielded and protected by sensors • Machine weight: 170 kg • Power: 1.7 kW • Production capacity: 45 kg/hour Lasdpfxox A Ad Io Acfjf

Condition: like new (used), Range (depending on lighting conditions): up to 15 m Lsdpfxod Ecncs Acfoaf Range with laser receiver: 30 m and more Leveling accuracy at 5 m: +/- 1 mm Self-leveling range: 4° +- 0.5° Accuracy of the horizontal line at 5 m: +- 1.5 mm Accuracy of the vertical line at 3 m: +- 0.75 mm Number of laser lines: 2 Weight: 485 g

Condition: used, blade width: 400 mm, Sheet Straightener / Leveler Brand: Procesos del Fleje Model: 6011-E-S2 Lajdpfx Acjydkz Eefsf Sheet width: 400 mm

Condition: like new (used), functionality: fully functional, Universal milling machine Deckel FP3 with new 3-axis FPS active digital display Heidenhain General overhaul by FPS 2015 Mint condition Technical data: >> Year of construction 1980 Machine no. 2201-5045 >> Rigid angle table >> Speed: 25 - 2500 rpm >> Infinitely variable feed in 3 axes >> rapid traverse in 3 axes >> Drive power .:2,0 / 4,0 KW >> Spindle brake >> Travel X/Y/Z: 500/300/400 mm >> Vertical milling head can be moved 200 mm on headstock >> Vertical quill and horizontal quill - SK40 extendable >> Tightening system M16 >> Weight approx. 1500 kg Accessories and equipment: >> 3 axes active digital display Heidenhain (latest version) >> Coolant device >> Central lubrication To the machine : Lasdju Dm E Hopfx Acfef On offer is a Deckel FP3 universal milling machine in mint condition. The FP3 was overhauled by FPS in 2015 and has only been used a little since then. The machine has little crank play and all spindles can be moved easily. On this newer FP3 model, the feed is infinitely variable in three axes, and the machine also has a rapid traverse for each axis. A major advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. An oil change has been carried out. Mechanically and electrically tested. The digital display from Heidenhain makes work easier and even more precise. Take the opportunity to inspect and try out this machine on site under power. The machine is available immediately.

Condition: like new (used), DELFIN INDUSTRIAL VACUUM CLEANER INDUSTRIAL VACUUM 400V EXCELLENT CONDITION SCOPE OF DELIVERY = AS SHOWN IN PICTURES (Approx. 1/4 - 1/5 of the price of a new unit – TOP OFFER) 4 units available Delfin ESD.DX.0036 Industrial Vacuum Cleaner – Excellent condition, ideal for industrial applications Manufacturer: Delfin Model: ESD.DX.0036 Condition: Very good, with only minor signs of use Functionality: 100% operational Features: ✅ ESD protection: Specifically designed for use in electrostatically sensitive areas – ideal for cleaning electronic components and delicate equipment ✅ High suction power: Efficient cleaning with a high-performance motor and excellent suction capacity ✅ Robust and durable: The Delfin ESD.DX.0036 is built for continuous operation in industrial environments and workshops ✅ Versatile: Ideal for dust extraction, cleaning machines, production areas, and construction sites ✅ Easy to operate: Simple handling with ergonomic handles and a user-friendly control panel Lajdpjwd D R Uofx Acfjf ✅ Low energy consumption: Powerful yet energy-efficient and environmentally friendly Technical details: Easy maintenance: The Delfin ESD.DX.0036 is easy to maintain and spare parts are readily available Robust construction: Optimized for industrial use, with exceptionally durable materials capable of withstanding extreme conditions Industrial businesses Cleaning laboratories and production facilities ⚡ Use in ESD-protected areas ️ Workshops, machine cleaning Cleaning electronics and sensitive devices Why choose this vacuum? The Delfin ESD.DX.0036 is the ideal choice for companies seeking a reliable, high-performance, and energy-efficient industrial vacuum cleaner. With ESD protection and powerful suction.

Condition: new, Sand Gravel Fabrication Plant: Essential Solution for Modern Construction Needs In the construction and infrastructure industry, high-quality sand and gravel are critical raw materials for creating concrete, asphalt, and other foundational elements. A Sand Gravel Fabrication Plant is the cornerstone of producing these materials efficiently and at scale. With advanced technology, versatility, and scalability, these plants cater to a wide range of projects, ensuring consistent quality and meeting the growing demand for construction materials. This article explores the general introduction, features, and applications of sand gravel fabrication plants, including both stationary and mobile systems. Ljdpfx Acsvlwqlofjaf General Introduction to Sand Gravel Fabrication Plants A sand gravel fabrication plant is a specialized facility designed to process raw materials such as sand, gravel, and aggregates into construction-grade products. These plants combine various equipment, including crushers, screens, conveyors, washers, and storage units, to convert raw materials into ready-to-use aggregates. There are two primary types of sand gravel fabrication plants: Stationary Fabrication Plants: Fixed installations designed for high-capacity production. Ideal for large-scale operations and long-term projects. Mobile Sand Gravel Fabrication Plants: Portable systems that can be transported to different project sites. Perfect for temporary operations and projects in remote locations. Both types are equipped with advanced machinery and automation systems to ensure high efficiency, precision, and sustainability. Applications of Sand Gravel Fabrication Plants Sand gravel fabrication plants are indispensable across multiple industries due to their ability to produce high-quality aggregates. Key applications include: 1. Construction and Infrastructure Produces sand and gravel for concrete, asphalt, and base materials. Supports large-scale infrastructure projects such as highways, bridges, airports, and railways. 2. Residential and Commercial Development Supplies aggregates for building foundations, driveways, landscaping, and drainage systems. Plays a vital role in residential housing and commercial property construction. 3. Road Construction Provides high-quality crushed stones and sand for roadbeds, pavements, and highways. Ensures durability and longevity of road surfaces. 4. Mining and Quarrying Efficiently processes mined materials into usable aggregates. Enhances productivity in quarrying operations with optimized material handling systems. 5. Environmental Restoration Supplies aggregates for erosion control, land reclamation, and shoreline protection projects. Facilitates sustainable environmental rehabilitation efforts. 6. Recycling of Construction Waste Mobile sand gravel fabrication plants are ideal for recycling concrete and asphalt. Converts waste materials into usable aggregates, reducing landfill burden and promoting sustainability. Stationary vs. Mobile Sand Gravel Fabrication Plants Stationary Fabrication Plants Best For: Long-term, large-scale projects and industrial operations. Advantages: High-capacity production. Robust and durable structures. Advanced automation for minimal manual intervention.

Condition: used, axle configuration: 3 axles, first registration: 01/2018, total length: 13,480 mm, total width: 2,550 mm, total height: 3,700 mm, suspension: air, tire size: 385/65 R22,5, Year of construction: 2018, Equipment: ABS, = Additional Options and Accessories = - Air suspension - Disc brakes Lajdpfxjzvrbvo Acfsf = Further Information = Tire size: 385/65 R22.5 Axle brand: MERCEDES Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Lift axle Unladen weight: 7,820 kg Payload: 30,178 kg GVW: 38,000 kg Dumper: Left / Rear

Condition: excellent (used), Factory closure for mask production. Installed in 2021, out of operation since March 2022. The systems are already dismantled and ready for shipment. Lasdpfsxqgf Esx Acfef