Used Elges Joint Bearing for sale (3,887)

Condition: used, Year of construction: 1998, Second-hand machine Year of manufacture: 1998 This machine can be used to drill corner joints, transom windows and olive joints in loose or compressed timber frames The scanning is carried out at the rebate, the 8 stops for corner bearings and transom windows, as well as for the rebate timber and transom, are automatically engaged once the timber is positioned. The machine features an automatic programme sequence with electric control for the drilling motors, activated by a safety foot pedal Kedpfx Aiezk Nzpo Rsdr Pneumatic connection R 1/4 5–6 bar Extraction velocity 25 m/sec. Extraction nozzle diameter: 120 mm Electrical connection: 0.75 kW Dimensions: 2950 x 650 x 1100 mm Availability: at short notice Storage location: Flörsheim

Condition: like new (used), total length: 5,000 mm, total width: 2,400 mm, total height: 930 mm, color: blue, Operating conditions: The trailer is designed for use on level and paved surfaces for internal plant transport. Towing vehicle type designation: unknown Load to be transported: unknown Multiple trailer operation: The trailer components are not designed for operation in combination with multiple trailers (without a trailer coupling). Payload: 40t at 6 km/h and evenly distributed load (surface load) across the loading platform between the axles. Point or line loads are only permitted upon notification. Main frame: Kodpfx Ajxrtluoi Rsdr Robust welded construction made from profile steel sections. Loading platform: Size approx. 5000 x 2400 mm, loading height 930 mm, platform covered with timber planks, all-round edge protection. Steering: All-wheel steering on 4 pendulum axles, tow bar can be raised, removed, and repositioned from front to rear. Hitch height on towing vehicle approx. 670 mm (other hitch heights only permitted upon notification). Drawbar eye according to DIN 74054, diameter 40 mm. Track rods with adjustable ball joints. Diagonal or towing rods adjustable and fitted with low-maintenance joint bearings. Drawbar safety lock according to accident prevention regulations (UVV). Undercarriage: 4 steered pendulum axles (2 steered axle lines) to ensure even load distribution on the wheels. Wheels with solid elastic rubber tires approx. 559 x 305 mm, wheel hubs with tapered roller bearings and permanent grease lubrication. Paint finish: Top coat RAL 5002 Ultramarine Blue. Additional equipment: 2 lashing bars on each long side. For rental or sale EU-wide.

Condition: new, Year of construction: 2025, Dimensions and Weights Length approx. 2000 mm Width/Depth approx. 1110 mm Weight approx. 430 kg Jointer Feed table length 1034 mm Maximum chip removal 5 mm Dust extraction connection Dust extraction port diameter Thickness 2 x 120 mm Thickness Minimum working height 3 mm Maximum working height 230 mm Maximum chip removal 5 mm Electrical Data Power of drive motor 5 kW Connection voltage 400 V Mains frequency 50 Hz Kdodpfx Ajhkz E Toi Ror Planer cutterhead Type TERSA Number of planer cutters 4 pcs Speed 5200 min⁻¹ Maximum planing width 410 mm Feed Speed 6 / 12 m/min The TERSA planer cutter system enables particularly quiet operation. Helically toothed steel feed roller for consistent and uniform material feed Material feed with two speeds Numerical display for thickness table height The 2,000 mm long jointer tables facilitate easy adjustment of large workpieces. Work tables are made of gray cast iron, annealed and stress-relieved, making them durable and dimensionally stable Stable, large aluminum jointer fence with round bar guide (1200 x 160 mm) Thickness table adjustment via handwheel with numerical display for planing height The high machine weight ensures maximum precision and smooth operation. Powerful industrial motor Robust steel/gray cast iron construction Equipment details Jointer fence Stable, large aluminum jointer fence (1200 x 160 mm) With precise round bar guide Dust extraction hose connection The dust extraction ports for the jointer and thicknesser point in the same direction during jointing and planing. Therefore, the dust extraction hose can be connected to the machine from the same side for both types of planing. You do not need a hose that runs around the machine. Planing unit Helically toothed steel feed rollers for consistent and uniform material feed Solid anti-kickback devices prevent workpieces from being thrown back 4-cutter shaft ensures an optimal planing result Chain drive Sturdy chain drive Drive gears made of steel Solid gray cast iron bearing block Two feed speeds Standard with two feed speeds Comfortably selectable from the operator panel Material feed Helically toothed steel feed rollers for a consistent and uniform material feed without marks Several teeth engage simultaneously for powerful feed Wear-free compared to rubber feed rollers Thickness table adjustment Adjustment via handwheel Numerical display for the set planing height Accuracy 1/10 mm Tersa planer cutterhead No more adjustment and screwing required Planer cutter change in seconds Self-locking Particularly quiet Perfect planing result Location: In stock, 54634 Bitburg - immediately available - Subject to prior sale

Condition: used, JOINT Decoiler – Used – CE Model: JDM 8.0 S Capacity: 8,000 kg Weight: 3,700 kg Kdodpfxjx N S H Ij Ai Rer Year of manufacture: 2003 Available quantity: 2 units

Condition: reconditioned (used), Year of construction: 2002, functionality: fully functional, TECHNICAL SPECIFICATIONS: Press Model: T100 CNR4 Year of manufacture: 2002 Nominal force: 1000 kN Weight: 7,000 kg Strokes per minute: 65 Maximum insertions per minute: 22 Operating air pressure min./max.: 4–5.5 BAR Stopping time: 0.195 s Safety distance: 312 mm Energy: 8493 KJ Adjustable stroke min./max.: 10–130 mm Kdedpfx Aisy D R N Rj Rsr Ram adjustment: 100 mm P.M.I high adjustment: 370 mm Maximum extraction stroke: 55 mm Worktable surface: 950x660x68 mm Ram plate dimensions: 540x450 mm Shank diameter: 60 mm Projection from center: 330 mm Max. die size: 540x450 mm Upper die weight: 180 kg Voltage: 400 V Hydraulic overload Complete with user manual and CE declaration of conformity Mechanical warranty: six (6) months Electrical panel warranty: twelve (12) months NEWLY INSTALLED COMPONENTS: • Motor • Flywheel bearings • Rotary joint bearings • Countershaft bearings • Clutch plates • Clutch pins and flanges • Clutch seals • Hydraulic overload seal • Hydraulic overload hose • Oil pump guide pressure gauge • Oil pump guide float • Hydraulic overload pump • Air pressure switch • Front and side safety guards with safety interlock keys • Worktable surface reconditioned on CNC machine • Foot pedal control • Electrical panel with remote assistance

Condition: used, mileage: 29,800 km, power: 115 kW (156.36 HP), fuel type: gasoline, gearing type: mechanical, first registration: 07/1981, next inspection (TÜV): 09/2027, color: red, number of seats: 2, Equipment: all wheel drive, Original early fire service G-Class from second ownership, which has never been used for civilian purposes. TÜV and H-certification (according to §23 StVZO) passed in September 2025. Roadworthiness inspection (HU) valid until 09/2027 ("no defects found", approved by DEKRA). Year of manufacture: 1981 / First registration: 07-1981. Original mileage only 29,800 km. Used exclusively for fire service duty to date. Rapid Intervention Vehicle (VRW) with ZIEGLER bodywork and Knurz-Kirsch generator with 5 kVA capacity. German garage-kept vehicle, equipped with the original registration document (only 2 previous owners), continuously registered until autumn 2025. Manufacturer stated in the original papers as GFG "Geländefahrzeug-Gesellschaft", then a joint venture between Daimler-Benz and Steyr-Daimler-Puch in Austria. This is one of the last vehicles produced under this manufacturer designation; shortly afterwards, "Daimler-Benz" was listed as the vehicle manufacturer in the registration papers. In 1991, a complete MATTER roll cage was installed in the vehicle (properly recorded in the documents). Includes a small roof rack system for transporting long equipment items. The long 280 GE is the largest and most powerful model of the first G-Class series that could be ordered ex-factory as a Mercedes G-Class in the early years. The M110 inline six-cylinder petrol engine with 2,717 cc and 115 kW / 156 hp starts and runs well. 4-speed manual transmission with differential locks. Power steering. Maximum speed registered at 155 km/h. A power take-off is installed for operating the generator. The last primary use was transporting a portable pump (TS) along with suction hoses and accessories. Therefore, there are no rear seats and a cargo area similar to a truck. Unfortunately, no additional seats remain apart from the 2 front seats. According to the original documents, this is a "3-seater" and the vehicle registration type is listed as "Other special-purpose vehicle, fire service rapid intervention vehicle (VRW)." Unladen weight is specified as 2,360 kg. Permissible total weight (originally 2,900 kg) was increased in 1991 to 3,030 kg as per the records. Therefore, this 280 GE currently has a payload capacity of 670 kg. Overall vehicle dimensions: Length 4,395 mm / Width 1,700 mm / Height 2,150 mm. Tires: 205/80R16, in good condition. Fitted with winter tires bearing the snowflake symbol in accordance with current legal requirements (DOT 2018). The G does not have a tow hitch, but it is equipped with the necessary mounting bracket. Retrofitting/towing capacity information cannot be supplied, as the relevant fields for towing capacity in the original registration document are marked as "not applicable." According to oral information from the last owner, the Mercedes is accident-free; however, this cannot be documented in writing and is therefore passed on to the buyer as an oral statement only. The 280 GE was driven a considerable distance on the motorway to us and completed the journey without any issues. A new battery has just been installed. The off-road vehicle is immediately available and ready for new tasks. Kodpfxexthdzs Ai Rodr This offer is only valid for commercial customers, freelancers, public authorities, emergency services, agriculture, forestry, and similar self-employed professionals. Unfortunately, sales to private end consumers are not possible. Subject to prior sale and errors excepted.

Condition: like new (used), total length: 6,000 mm, total width: 2,500 mm, total height: 1,012 mm, color: blue, Operating conditions: The heavy-duty trailer is designed for use on level, paved roads in internal traffic. Combined journeys: The trailer components are not designed (without trailer coupling) for combined journeys with several trailers. Payload: 60 t at 6 km/h and uniform loading (surface load) of the loading area between the axles. Point or strip loads are only permitted after notification. Base frame: Sturdy welded construction made of sectional steel Loading area: Size approx. 6000 x 2500 mm, loading height approx. 1012 mm, loading area cover with softwood planks, all-round recessed edge protection Steering: All-wheel steering on 4 pendulum axles, drawbar can be raised, removed and repositioned from front to rear, suspension height on towing vehicle approx. 650 mm (other suspension heights are only permitted after notification), drawbar eye to DIN 74054 dm 40 mm, tie rods with adjustable ball joint heads, diagonal or drawbars adjustable and fitted with low-maintenance spherical bearings, drawbar drop safety device to UVV (accident prevention regulations) Chassis: 4 steered swing axles, 2 steered axle lines to achieve an even load on the wheels, wheels with elastic solid rubber tires approx. 559 x 406 mm, wheel hubs with tapered roller bearings and permanent grease lubrication. Paint finish: Top coat RAL 5002 ultramarine blue Additional equipment: - Optional: dual-circuit air brake system acting on 4 wheels, gradient < 4%. Separate parking brake via spring-loaded brake cylinder, also acting on 4 wheels. - 2 lashing eyes or crane eyes made of round steel welded horizontally into the outer beams on both long sides, only use the crane eyes when the trailer is not loaded - Turning radius inside approx. 2100 mm - Outside turning radius approx. 5500 mm - Drawbar approx. 1500 mm long Kdodeuf Rw Tepfx Ai Rsr Rental or sale EU-wide.

Condition: like new (used), total length: 10,000 mm, total width: 3,000 mm, total height: 1,105 mm, color: blue, Operating conditions: The heavy-duty trailer is designed for use on level, paved surfaces for internal plant transport. Tandem operation: The trailer components are not designed (without a coupling device) for tandem operation with multiple trailers. Payload: 60 t at 6 km/h with evenly distributed load (surface load) across the load area between the axles. Point or line loads are only permitted upon prior notification. Main frame: Kedpfx Aioxrr Uho Rsdr Robust welded construction made from profile steel. Loading area: Dimensions approx. 10,000 x 3,000 mm, loading height approx. 1,105 mm, loading surface covered with softwood planks, all-round recessed edge protection. Steering: All-wheel steering on 4 oscillating axles; drawbar can be raised, removed, or repositioned from front to rear; coupling height at the towing vehicle approx. 650 mm (other coupling heights only permitted upon prior notification); towing eye according to DIN 74054, 40 mm diameter; track rods with adjustable ball joint heads; diagonal or tie rods adjustable and mounted with low-maintenance pivot bearings; drawbar drop protection according to accident prevention regulations (UVV). Chassis: 4 steered oscillating axles, 2 steered axle lines for even load distribution on all wheels; wheels with solid rubber elastic tires approx. 559 x 406 mm; wheel hubs with tapered roller bearings and permanent grease lubrication. Paintwork: Top coat RAL 5002 ultramarine blue Rental or sale EU-wide.

Year of construction: 2005, condition: good (used), We are offering this used Wolf KG Silobau reinforced concrete silo, manufactured in 2005. Manufacturer: Wolf KG Silobau Model: Reinforced concrete silo Year of manufacture: 2005 Kedpfozk Ehfsx Ai Rodr Condition: good Category ID: 399 Type: Reinforced concrete silo Inner diameter: 6.0 m Outer diameter: 6.2 m Total height: approx. 13 m Capacity: approx. 198 m³ Suitable for wood chips / sawdust Complete foundation system available The precast concrete segments of the container and the substructure are made of concrete with a strength class of B45 (equivalent to today's C35/45). The silo contents (wood chip heating system) were damaged by a fire in March 2025. A joint expert report from the insurance company and the policyholder came to the following conclusion: - The reinforced concrete structure is statically sound with no significant fire damage. - No impairment of the load-bearing capacity of the silo walls. - No significant damage to the concrete precast elements. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2011, loading space width: 2,440 mm, loading space length: 6,060 mm, loading space height: 2,800 mm, Field of application: Freight transport General condition: average Technical condition: average Visual appearance: average Please contact Christian Theißen for more information Manufacturer: Unknown Model: Sanitary container Year of build: 2011 Condition: Used Data: Dimensions LxWxH: 6058x2438x2800 mm Kdedpfxezpxddo Ai Rjr inside height: 2500 mm Modular construction: Container steel structure class EXC2 Information: Used, damaged, dents on the outer walls. Only the container is for sale, without stairs or wastewater tank! Transport Points in accordance with ISO Standard: in the corners stackable: 3-times Roof: with layer structure Galvanized sheet steel: 0,55 mm Drainage of rainwater: via circumferential gutters in the frame, with downpipes in the corner posts Load-bearing capacity of the roof: 100 kg / m² Walls: Interchangeable panels with layered structure Floor: with layer structure Floor finish: 2 mm grey PVC flooring, welded at the joints and white PVC skirting board Floor load capcity: 200 kg / m² Dimensions: 900x2.000mm Windows: white PVC-Windows Electrical installation: Electrical flush-mounted installation (concealed) Powerinstallation: 230V-sockets Lighting (2x16W): Lamps Location: Bremerhaven immediately available

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: 89257, pressing force: 60 t, input voltage: 380 V, total height: 2,000 mm, type of input current: three-phase, working height: 2,000 mm, total length: 9,500 mm, control cabinet width: 1,000 mm, total width: 2,000 mm, year of last overhaul: 2026, pressure: 100 bar, control voltage: 12 V, workpiece height (max.): 120 mm, rotational speed (max.): 6,000 rpm, air pressure: 8 bar, We offer this ready for use WEINIG Dimter HK200 finger jointing line, year of construction 1996. Kdedezatztspfx Ai Rsr If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Joint bearing -Inner diameter: 140 mm -Outer diameter: 230 mm -Brite outer ring: 80 mm Kdedpfjb A H N Tex Ai Rjr -Width of inner ring: 130 mm -Grease groove -Weight: 18 kg -Number: several available

Condition: new, With a 520 mm planing width, motorized thickness table adjustment, and comfort switching - Stable steel and cast iron construction - Large, ribbed jointer tables made of cast iron - Smooth operation due to high dead weight - Four feed speeds - Motorized thickness table lift with two speeds and digital display - Segmented pressure beam at the infeed - Precision ball bearings on the four-knife cutterblock - Helical, hardened steel infeed roller for especially consistent and gentle wood feed - Outfeed roller with rubber coating - Large tiltable fence, adjustable from 90° to +45° - Standard auxiliary fence included - Powerful industrial motor - Pneumatic quick-change system with pneumatic raising and lowering of the jointer table - The extraction port remains in the same position for both jointing and thicknessing operations—no need for additional extraction hoses, inconvenient switching, or rerouting around the machine Kdodoxnqyhspfx Ai Rsr Scope of delivery: Technical Data: Dimensions and Weights: - Length (product): approx. 2300 mm - Width/Depth (product): approx. 1100 mm - Weight (net): approx. 980 kg Jointer: - Total table length: 2300 mm - Infeed table length: 1200 mm - Working height: 930 mm - Max. planing depth: 6 mm - Fence length: 1200 mm - Fence height: 190 mm - Fence tilt: 90 – 45° Extraction connection: - Extraction port diameter, thicknesser: 120 mm Installation Information: - Space requirement, length: 2300 mm - Space requirement, width/depth: 1610 mm Explanation: Max. travel paths or usable lengths are taken into account. - Machine body length: 1235 mm - Machine body width/depth: 850 mm - Working area length: 1000 mm - Working area width/depth: 3500 mm Note: Please add the working area to the space requirement to determine the recommended free installation space for the machine. Thicknesser: - Min. working height: 3.5 mm - Max. working height: 250 mm - Max. cutting depth: 8 mm Electrical Data: - Main drive motor power: 7 kW - Connection voltage: 400 V - Frequency: 50 Hz Cutterblock: - Cutterblock type: TERSA - Cutterblock diameter: 120 mm - Number of knives: 4 - Cutterblock speed: 5000 rpm - Max. planing width: 520 mm Feed: - Feed speed: 5/8/12/18 m/min

Condition: ready for operation (used), Year of construction: 2001, operating hours: 27,267 h, functionality: fully functional, turning length: 180 mm, turning diameter: 100 mm, spindle bore: 43 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 125 mm, travel distance Z-axis: 195 mm, TECHNICAL DETAILS Turning diameter: 190 mm Turning length: 180 mm Max. turning diameter: 100 mm Travel X-axis: 125 mm Travel Z-axis: 195 mm Rapid traverse X-axis: 15 m/min Rapid traverse Z-axis: 20 m/min Spindle bore: 43 mm Spindle bearing diameter: 80 mm Spindle speed range: 60–6,000 rpm Tailstock diameter: 40 mm Tailstock taper: MK 3 Tailstock travel: 45 mm Kedpjzul T Njfx Ai Rodr Number of tool positions: 10 MACHINE DETAILS Transformer: 400 V / 200 V Data interface: V.24 / RS-232-C Operating hours: 27,267 h EQUIPMENT Bar feeder Integrated CNC control Space-saving, compact design Inductively hardened flat guideways for bed and carriage Continuously variable AC main spindle drive Constant cutting speed programming Integrated cold light Ammeter for main spindle drive Swiveling central control panel Controls for automatic, manual, and CNC programming modes Three-phase servo motors for X and Z axes Backlash-free, pre-tensioned precision ball screws for X and Z axes Automatic central lubrication with electrical monitoring Coolant system with tank, pump, lines, and spray nozzle Electric 10-position turret system, MORI SEIKI Automatic turret indexing logic Direct coolant supply through the turret disk Fixed hydraulic unit for power chuck Front sliding door with large viewing window Electrical connection for chip conveyor, prepared Electrical equipment according to VDE 0113 Attached control cabinet Freestanding transformer

Condition: ready for operation (used), Year of construction: 2011, operating hours: 31,113 h, functionality: fully functional, machine/vehicle number: NHX40KB0083, travel distance X-axis: 560 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 660 mm, controller model: MITSUBISHI MSX-853 IV, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 560 mm Travel range, Y-axis: 560 mm Travel range, Z-axis: 660 mm Feed rate: 0–60 m/min Distance from spindle nose to table surface: 80–640 mm Number of pallets: 2 Pallet dimensions: 400 × 400 mm Table length: 400 mm Table width: 400 mm Max. workpiece length: 630 mm Max. workpiece width: 630 mm Max. workpiece height: 900 mm Max. workpiece diameter: 630 mm Max. workpiece size: Ø 630 × 900 mm Max. workpiece weight: 400 kg Pallet changing time: 9 s Max. spindle speed: 12,000 rpm Spindle drive power: 15/11 kW Spindle torque: 110 Nm Spindle bearing inner diameter: 80 mm Spindle type: SJ-2B4351TK Tool positions: 40 Max. tool diameter: 70 mm Max. tool diameter with free neighboring positions: 170 mm Max. tool length: 450 mm Max. tool weight: 8 kg Tool holder: MAS-BT40 MACHINE DETAILS Control system: MITSUBISHI MSX-853 IV Kodozrl H Rspfx Ai Rsdr Rated power: 38 kVA Total power consumption: 38 kVA Dimensions & Weight Dimensions (L x W x H): 2,720 x 4,224 x 2,513 mm Total weight: 7,600 kg Coolant tank capacity: 170 l High-pressure coolant: 15 bar Operating hours Hours under power: 64,734 h Operating time: 31,113 h EQUIPMENT Chip conveyor Work area light 4th axis Cooling High-pressure cooling 2-pallet changer

Condition: ready for operation (used), Compact Dovetail Joint Machine Capacity: approx. 4-6 joints/min. For wood sections with the following dimensions: Thickness: 30-120 mm Width: 75-250 mm Pressing force: 22.5 t Automatic glue application via 2 glue combs, designed for processing PUR glue. Spring-mounted with a safety cut-out that immediately stops the milling and glue application feed in case of even the slightest load. All parts are chrome-plated. Electrical system with PLC Milling motor power: 22.00 kW Kdedpozmmr Rjfx Ai Rsr Hydraulic unit: 29.50 kW Oil cooler: 0.75 kW Infeed feed: 1.50 kW Outfeed feed: 2.50 kW Cut-off saw: 3.00 kW Total power consumption: 59.25 kW = 120 Amperes

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 71, Finger Jointing Line GOMA FC10 KZ6 + FC10 PZ6 TENONER FC-10KZ-6 Milling spindle 50 x 210 mm Main motor 18.5 kW Chipper 300/60 x 8 mm, 6 kW Scribes for "line-to-line" jointing 2x160mm, 1.1 kW Working table width 600 mm Package height 30 to 150 mm PRESS FC-10PZ6 Package width 30-150 mm Thickness 20-70 mm Hydraulic pump 100 bar Finished board length 6000 mm Kdodpfxey Sw Uve Ai Rjr Possible intermediate cuts, e.g. 2x3000mm, 6x1000mm, etc. Machine in good working condition, used. Good technical condition. Price 110,000.00 PLN net, negotiable.

Condition: as good as new (ex-display), Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!! CAN SHARPEN MAX 406MM DIAMETER CUTTERS !!! The G-716 Semi-automatic Cutterhead Grinder is used to sharpen 178mm to 406mm diameter eased edge, milled to pattern, and fingerjoint cutterheads. Worktable traversing is automatic and has adjustable stops. Cutterhead indexing is manual. Each knife is held against a positive stop while being ground !!! No Index Plate To Change No index plate to change when working with heads with different numbers of knives. The use of an index plate assumes that the knives and head separations are uniform throughout, which is often not the case. If the height of the knife is high or low, then the front face of the knife will vary from knife to knife making the task of grinding difficult. The one constant is the back face of the knife, therefore the use of an indexing stop against the back face will provide for accurate indexing regardless of the irregularities in the knives and head slots. Head Indexing and Wheel Feed: Manual Kdjdpfx Ajq Dzi Tji Ror Minimum / Maximum Diameter Cutterhead: 7″ Min./16″Max. 178mm Min./ 406mm Max. Worktable Feed: Air / Oil Travel (maximum): 12″ 305mm. Adjustable Limits: Proximity Switch Speed: Fully Adjustable Index Method: Manual index after each knife is ground. Grinding Spindle: 1-1/2 HP Wash Down Duty TEFC Motor 3600 RPM, Dual ABEC 7 Precision Bearings, with Sealed Lubrication. 8″ (203mm)Diameter Grinding Wheel (9″ 229mm Diameter Max.) Coolant System: 15 Gallon Tank with Casters, Sediment Tray Full View Sight Glass, 5 GPM Pump (120VAC) Wash Down Hose Included Specifications Grinds 7″ to 16″ diameter eased edge, milled to pattern, and finger joint heads Automatic traversing worktable with adjustable travel limits Manual indexing of knives against a positive stop with grinding position pneumatic brake allowing precision indexing without the need of an index plate High precision 1-1/2 HP grinding spindle with sealed lubrication Recirculating adjustable flow flooded coolant system with wash down hose Fully enclosed grinding chamber with viewing windows and task light Grinding wheel feed allows unattended operation. New Proscale.

Condition: used, Year of construction: 1995, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 400 V, input frequency: 50 Hz, planing width: 530 mm, rotational speed (max.): 4,400 rpm, We are selling our robust MAKA AD 530 A planer and thicknesser. This machine is from 1996 and is ideal for carpentry shops, joineries, and woodworking businesses. Equipment and technical data: Manufacturer: Griggio / Distributed by MAKA Type: AD 530 A Year of manufacture: 1996 Planing width: approx. 530 mm Tersa cutterhead Ksdpfxjzu Sdne Ai Rsdr Articulated pressure bar Auxiliary fence Main motor: 5.5 kW Feed motor: 0.18 kW Connection: 380 V / 50 Hz / Three-phase Machine No.: 9405190 Heavy-duty and durable industrial machine Important: Collection is only possible once our new machine has been delivered. This is expected to be around mid-September. By arrangement, the machine can be inspected and tested on site beforehand. Due to its size and weight, the machine is preferably sold for self-collection. Assistance with loading can be arranged in advance. Private or commercial sale with exclusion of warranty, guarantee, and right of return. All information is provided to the best of our knowledge and without guarantee.

Condition: as good as new (ex-display), Year of construction: 2025, Jointer-thicknesser with TERSA quick-change system for planer blades. With TERSA quick-change system for blade changes in seconds. TERSA planer blade system enables particularly quiet operation. Helically toothed steel infeed roller for consistent and even material feed. Robust jointer tables made of ribbed cast iron, milled and stress-relieved, making them insensitive and permanently flat. Large, swiveling fence for precise jointing, can be repositioned at 90°/45°, with quick-clamp. Jointer table opens to the rear. Powerful motor. Robust steel/cast iron construction. Long-hole drilling device can be retrofitted. Equipment details: TERSA planer blade shaft. No more adjusting and screwing. Blade changes in seconds. Self-locking. Particularly quiet. Perfect planing result. Jointer Standard equipped with TERSA quick-change system for planer blades. Large-sized jointer tables. The jointer and thicknesser tables made of cast iron guarantee maximum smoothness and vibration-free operation. Thicknesser With the powerful thicknesser feed, workpieces up to 200 mm high can be planed. The helically toothed infeed roller guarantees consistent feed. Changing from jointer to thicknesser is done in seconds with a single action. Drive Sturdy chain drive. Drive sprockets made of steel. Solid cast iron bearing housing. Planing unit Solid anti-recoil devices prevent the workpiece from kicking back. 3-blade TERSA shaft ensures an optimal planing result. Special equipment features Large fence, can be repositioned at 90°/45° for precise jointing with quick-clamp. Scope of delivery: Large fence, can be repositioned at 90°/45° for precise jointing with quick-clamp. TERSA planer blade shaft. Model: minimax fs 30g TERSA Article No.: 5503036 Technical data ---Technical data, jointer--- Total length of tables: 1200 mm Feed table length: 580 mm Table height: 900 mm Working width: 300 mm Max. chip removal: 3 mm ---Technical data, thicknesser--- Dimensions of thicknesser table: 450 x 300 mm Min./max. working height: 3/200 mm Kjdpfodqy Uqex Ai Rodr Feed speeds: 6 m/min. Planer shaft diameter / planer blades: 62 mm / 3 pcs. Speed: 5500 rpm Motor 400V/50Hz/S6 40%: 1.8 kW Extraction nozzle diameter: 2 x 120 mm Weight: 140 kg

Condition: like new (used), Year of construction: 2010, operating hours: 200 h, functionality: fully functional, Finger-jointing line, like new, only operated for 60 days. Ksdpfxeyl Nuaj Ai Rsdr

Condition: reconditioned (used), Working width 3600 mm Working height 2600 mm Number of cylinders 5 St. loading dimensions L x W x H 4400 x 1150 x 2970 mm weight 3000 kg Schafberger + Sproedhuber Bavaria Frame Press ----- Machine will be partially reconditonned by us before delivery. With automatic pressing cycle + manual control for tenon + slot corner joints. CE-certified version Basic machine in the strongest welded frame construction, with thick-walled special hollow profiles. Guideways for the pressure beams for the press corners in a low-wear machined design. Fast, smooth, manual width adjustment via ball-bearing carriages, fixed in a hole pattern. Height adjustment and pressing via long-stroke cylinders in a single work cycle. Right-side press corners with integrated horizontal cylinders, therefore no vertical positioning of the horizontal pressure cylinders necessary, thus avoiding cylinder collisions. Lower abutment adjustable in several positions for the most favorable insertion height. 3 vertical press cylinders, double-acting, stroke adjusted to working height Ksdjw T Un Uopfx Ai Redr 2 horizontal press cylinders, double-acting Abutment and pressure plate depth 80 mm Working size: Length x Height = approx. 3,600 mm x 2,600 mm Space requirement/loading dimensions: approx. 4,400 mm x 1,150 mm x 2,970 mm (Length x Width x Height) Option: ALWA pressing supports for sloped windows (Technical specifications according to the manufacturer – no guarantee! Images may differ from the original. Prices are net, plus VAT (domestic))

Condition: used, Year of construction: 2009, functionality: fully functional, type of input current: AC, total width: 1,350 mm, total length: 1,200 mm, total height: 1,300 mm, spindle speed (max.): 3,900 rpm, overall weight: 530 kg, input voltage: 400 V, milling spindle length: 200 mm, rotational speed (min.): 3,900 rpm, rotational speed (max.): 3,900 rpm, working width: 200 mm, spindle diameter: 50 mm, We are offering this used Omec F10/200 fork cutter, manufactured in 2009. Manufacturer: Omec Ksdpfjzmug Njx Ai Rodr Model: F10/200 Year of manufacture: 2009 Condition: used Machine type: Fork cutter, finger fork, drawer fork Fully functional OMEC F10/200 milling machine for the production of finger forks for drawer blade manufacturing. Manufactured in 2009, motor power 11.5 kW, spindle diameter 50 mm and weight approximately 530 kg. Without fork cutter set. The machine is in good condition and can be inspected and demonstrated by appointment. Loading and transport can be arranged.

Condition: new, Year of construction: 2026, Aluminum incline conveyor with substructure including leveling feet and machine feet for compensating uneven floors - Feed height: 500 mm - Inclined section: 2,000 mm - Discharge height: 1,200 mm Design: Aluminum structural construction - Triple-reinforced profile 135x45 mm - Continuous removal plate 2.0 mm galvanized Drive roller + return roller made from S235 steel, welded and machined Ø150x620 mm crowned, shaft fixed with pillow block bearings. Drive: Mounted gear motor 1.10 kW, belt speed 0.77 m/sec Connection 230/400V, 50Hz, protection class IP54 Drive pre-wired up to the motor terminal box (Commissioning must be carried out by qualified electrical personnel) PVC conveyor belt DM 10/2 0+005 PVC green Belt width: 600 mm endless high-frequency welded with stepped joint Belt material: 2-ply, especially cross-stable 2 pcs wave edge profiles, 80 mm high, 50 mm wide, high-frequency welded flush with the belt edge 14 pcs T60 cleats, 400 mm long, pitch approx. 296 mm, center-mounted Belt material: 2-ply, especially cross-stable Due to the wave profiles on both sides, the usable belt width is reduced: Usable width 500 mm, calculated as follows: Kedpfeyhzhbox Ai Rsdr (Top view) Crosswise arrangement 50+500+50 mm

Condition: ready for operation (used), Year of construction: 2012, operating hours: 75,685 h, spindle speed (max.): 6,000 rpm, travel distance X-axis: 85 mm, travel distance Z-axis: 280 mm, spindle motor power: 20,000 W, controller manufacturer: SIEMENS, number of axes: 7, This 7-axis Index ABC horizontal turning machine was manufactured in 2012. It features a main spindle with a maximum speed of 6000 rpm and a sub spindle with a speed of 4500 rpm. The machine includes two turrets, each equipped with X and Z axes, and a powerful tool drive. If you are looking to get high-quality turning capabilities, consider the Index ABC machine we have for sale. Contact us for further details. • Main spindle: D65, spindle interface AD140, ID83, max speed 6000 rpm; max power 20 kW at 100% duty cycle; C-axis; electronic synchronization between spindles • Sub spindle: 7.5" chuck interface, max speed 4500 rpm • Spindle hours: • S1 – 18914h • S2 – 661h • S3 – 3h • S4 – 29211h • S5 – 2413h • S7 – 1250h • The synchronous spindle was renewed in September 2024 • Chuck: 3-jaw KFN95/3, clamping force 480 daN, max 4000 rpm Kodjzvu Ryjpfx Ai Redr • Turrets: two turrets each with X and Z axis; tool drive on turret 6000 rpm, 3.3 kW • Rear working attachment: without quill, 5 quill positions • Coolant: 80 l/min at 8 bar and 20 l/min at 18 bar; system prepared for emulsion; coolant return at spindle end D60 (without bar feed) • Control: INDEX C200-4D based on Siemens 840D; color display 26 cm; thread cutting without compensating chuck; motor-current-based tool monitoring; internal tool management and setup dialog; extended machining cycles; parts counter and production monitoring • Power/connection data: 400 V, 50 Hz TN network; total connected load 45 kVA; rated power 38 kW; rated current 65 A; max fuse protection 100 A • Hydraulic hollow clamping cylinder D65 Additional equipment • Chip conveyor: hinged belt, discharge height 1250 mm • Bar feeder: MBL 65/3700 for spindle height 1010 mm; bar diameters up to 65 mm; bar feeder length 3700 mm; guide channel system with rolling bearings; loading rods (Ø12 mm and Ø20 mm, length 1400 mm); guide sets for 14–18 mm, 18–22 mm, 22–65 mm • Workpiece unloading device for main and sub spindle with part catcher • Teleservice preparation (ISDN) with software • Machine prepared for extraction system 230 V • Working area light • Two electrical cabinet cooling units • Transformer 3 kVA Technical Specification Counter Spindle Yes Driven Tools Yes