Used Emde Automation Shredder for sale (14,554)

Year of construction: 2026, condition: new, functionality: fully functional, Fully Automatic Board Sorting and Sawing System for Sawmills With its fully automatic board sorting and sawing system, JAC Automation & Robotics GmbH offers a powerful solution for significantly reducing manual operations in sawmills and wood processing companies. The system handles the entire process, from the unsorted raw material stack to the finished, sorted, and stacked boards. A reference system is already in successful operation at a sawmill. Your advantages • fully automatic and autonomous system operation • significant reduction in manual handling • relief from personnel shortages • fewer errors due to incorrect sorting • reproducible quality • automatic stacking • flexible allocation based on length and width • automatic defect detection Laodpszz Sugjfx Amvog • modular, expandable design In the current manual process, an employee may have to pick up and move a board up to four times. With the automated system, this handling is completely eliminated. Workpiece range • Length: approx. 1,700–5,200 mm • Width: approx. 95–310 mm • Thickness: approx. 30 mm • other dimensions available upon request Automatic process The raw boards are picked up by a KUKA robot and automatically fed to the measuring and sawing station. Length and width are determined using laser sensors. In addition, boards that are too severely warped can be detected and automatically sorted out. Each board can be sawn at both ends. Alternatively, a pure sorting operation without sawing is also possible. Sawdust and waste are automatically transported via a chute and a conveyor belt to a waste container located outside the system. Flexible sorting The reference system has: • 10 freely configurable sorting and stacking locations • 2 reject locations • 2 raw material locations The operator can freely define which length and width ranges are placed on which stacking location. The finished boards are stacked fully automatically. Optionally, intermediate strips can be inserted between the individual layers. Performance With a high variety of products, the reference system achieves approximately: • 4 boards per minute • up to approximately 240 boards per hour Technology • 2 × KUKA KR 120 R3900-K • 1 × KUKA linear unit • Siemens S7-1500 • Siemens F-CPU • 19" touch panel • WinCC Runtime • Production and piece count recording • Remote maintenance via Weidmüller router • Safety fence and Keyence light curtains Individually adaptable The system is newly manufactured and planned according to customer specifications. Layout, workpiece range, number of sorting locations, and the range of functions can be adapted. Optionally, an expansion with AI-based camera technology for detecting wood defects and quality characteristics is possible. Reference area: approx. 25 × 15 m JAC handles the complete project management, including design, manufacturing, programming, assembly, commissioning, and training. Delivery time: approx. 6-8 months after technical clarification and order release. Europe-wide delivery and commissioning are possible. Price on request.

Condition: new, Shafts dedicated for IMPACTOR 250/850, COMPACTOR 300, EKOMAXX 800. Option to place orders including cassette and screen basket. - BETONWELLE - PADDLE - STAR (4-KNIFE, 6-KNIFE) - TRAPEZOIDAL PROTECHNIKA is a company with 21 years of experience, specializing from the outset in the production of spare parts and complete recycling lines. In recent years, we have expanded our portfolio to include the manufacture of cutting shafts for slow-speed shredders. By implementing automated welding processes and utilizing proprietary production technology, we have minimized production times while maintaining consistent, high quality. The production of cutting shafts is carried out serially, which among other benefits, enables us to collaborate with machinery manufacturers as an OEM partner. What sets PROTECHNIKA apart from the competition? It's simple! - Certified 3.1 materials - TUV SUD Rheinland quality certification - ISO 9001 compliance - Automated welding process / ISO 15613 / ISO 15614 - Welders qualified to ISO 9606-1 - ISO 9001:2015 - ISO 14001 - Independent design department capable of meeting all customer requirements - Proprietary RESEARCH AND DEVELOPMENT CENTRE Laodpsx Hhkqsfx Amvjg Customer relations are of the highest importance to us, because their satisfaction is our success!

Condition: used, functionality: fully functional, Year of construction: 2005, type of cooling: water, overall weight: 15,000 kg, total length: 10,000 mm, total width: 4,000 mm, total height: 25,000 mm, year of last overhaul: 2024, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, emergency stop, safety light barrier, ITEC AG laser cutting system for circuit boards. The system consists of the following components: ITEC AG cell with granite bed, 3-axis Motoman NX 100 robot, vacuum manipulator RIEDEL L 21/8 TR 3.00 cooling system GSW Schwabe AG straightening machine MHR 2.5mm / 1250mm / 7 rollers GSW Schwabe AG coil handling system VRMA 80/76 The circuit boards are fed from the coil (GSW Schwabe AG, MHR 2.5/1250, general overhaul in 2022) into the straightening machine (GSW Schwabe AG, VRMA 80/76). The PDFs with technical data are attached. The laser portal for the TRUMPF TF is mounted on a solid granite bed, which guarantees absolute repeatability. The Motoman robot picks and places components using a vacuum manipulator and camera. The system has been continuously maintained and is in production-ready condition. Lodpfx Aozyzzyjmveag Before dismantling, the system was cleaned, and all liquids and coolants were evacuated.

Condition: used, Year of construction: 2011, machine/vehicle number: 408529.10.000/01, Temperature control unit manufactured by Hahn Automation, used and untested. Designed for applications in tool temperature control, injection molding, and industrial process engineering. Operates as a single-circuit system with REMAK control system. The working medium is water*, with a maximum flow temperature of 95 °C*. Heating capacity is 27 kW, pump capacity is 60 l/min at 4.5 bar*. Year of manufacture: 2010, total weight: 130 kg. Lajdpfx Aey Su A Rsmveg

Year of construction: 2012, condition: used, Two large and two small autonomous industrial vehicles are available, 1) 2x large clamp-type industrial vehicle, axle distance, front-to-rear: 2255mm, max. load: 2,5t, max. forward travel speed: 1,5m/s, max. reverse travel speed: 0,3m/s, ground clearance: 30mm, length: 3999mm, width: 2674mm, height (mast lowered): 3841mm, weight (without battery): 7,45t. 2) 2x small V-Shape industrial vehicle, axle distance, front-to-rear: 2026,5mm, max. load: 2,5t, max. forward travel speed: 1,5m/s, max. reverse travel speed: 0,3m/s, ground clearance: 30mm, length: 3367mm, width: 1920mm, height (mast lowered): 2295mm, weight (without battery): 2,7t. An on-site inspection is possible. Lodjzun Ucopfx Amvsag

Condition: used, machine/vehicle number: 008014, Max. panel length: 1250 mm Lateral horizontal groups: yes Lsdpfx Amowuz S Dsvoag

Condition: new, We would like to present you with an offer for Protechnika shafts dedicated to MRW 2.85 and MRW 2.10.10 machines: MRW 2.10.10: - 6-10-10 - 8-10-10 - 10-10-10 - Steel shafts - Side combs - Breaking bar Lajdex Hx Hpjpfx Amveg MRW 2.85: - 5-8-8 - 6-8-8 - 8-8-8 - 10-8-8 - Side combs - Breaking bars PROTECHNIKA is a company with 21 years of experience, actively engaged in the manufacture of spare parts and complete recycling lines from the very beginning of its operations. In recent years, we have expanded our portfolio to include the production of grinding shafts for slow-speed shredders. Through the implementation of automatic welding processes and our own proprietary production technology, we have been able to minimise production times while maintaining consistent, high quality. Grinding shafts are produced in series, which, among other benefits, enables us to partner with machine manufacturers on an OEM basis. What sets PROTECHNIKA apart from the competition? It's simple! - Certified 3.1 materials - TUV SUD Rheinland quality - ISO 9001 - Automated welding process / ISO 15613 / ISO 15614 - ISO 9606-1 certified welding personnel - ISO 9001:2015 - ISO 14001 - Independent design department able to meet any customer requirements - Our own RESEARCH AND DEVELOPMENT CENTRE Customer relations are our top priority, because their satisfaction is our success!

Condition: new, Year of construction: 2025, SHAFTS DEDICATED FOR ARJES 950 / TYTAN MACHINES IN ALL AVAILABLE CONFIGURATIONS. NOW ALSO AVAILABLE WITH CASSETTE OPTION. - STEEL SHAFTS WITH TWO TYPES OF RINGS Lodpfx Aex Hhd Domvsag - BETONWELLE SHAFTS - PADDLE SHAFTS WITH TWO DESIGNS - STAR SHAFTS PROTECHNIKA is a company with 21 years of history, specializing since its inception in the production of spare parts and complete recycling lines. In recent years, we have expanded our product range to include the manufacturing of grinding shafts for slow-speed shredders. Thanks to the implementation of automated welding processes and in-house production technology, we have minimized lead times while maintaining consistently high quality. Grinding shafts are produced in series, allowing us, among other benefits, to collaborate with machinery manufacturers as OEM suppliers. What makes PROTECHNIKA stand out from the competition? The answer is straightforward! - Certified 3.1 materials - TUV SUD Rheinland quality certification - ISO 9001 - Automated welding process / ISO 15613 / ISO 15614 - ISO 9606-1 certified welders - ISO 9001:2015 - ISO 14001 - Independent design department capable of fulfilling any customer requirement - Own RESEARCH & DEVELOPMENT CENTER Customer relations are our highest priority, as their satisfaction is our success!

Year of construction: 1999, condition: used, functionality: fully functional, machine/vehicle number: 010325, COMPLETE TYRE RECYCLING LINE – SATURN / ELDAN A complete industrial tyre and rubber recycling line from reputable manufacturers Granutech Saturn and Eldan Recycling is for sale. The installation is sold as a complete, ready-to-dismantle and re-commission technological line. The line includes: SATURN 52-32 HT – industrial primary shredder (Heavy Duty Shredder) SATURN / ELDAN GRIZZLY 80 – secondary shredder ELDAN Granulator 160 – year of manufacture 1999 complete set of belt conveyors inter-stage conveyors 2 magnetic separators for steel recovery vibrating tables and material separation system discharge conveyors complete set of original control and electrical cabinets complete line control automation system Applications: recycling of car and truck tyres rubber shredding steel recovery production of rubber granulate Advantages: complete technological line machines from reputable manufacturers, Granutech Saturn and Eldan robust industrial design suitable for continuous operation Lsdpfx Aszmucqjmveag transportation and re-assembly possible The machine can be viewed by prior arrangement. We provide assistance with dismantling and loading. Additional photos are available upon request. INDIVIDUAL MACHINES CAN BE PURCHASED SEPARATELY

Condition: new, We would like to offer shafts specifically designed for medium-sized shredders equipped with side combs, a breaking bar, and a cassette system. Suitable for models: LINDNER U75, ARJES VZ750, HAMMEL VB750OL, NOVA 75DK - 5-7-7 - 6-7-7 - 8-7-7 - 10-7-7 MRW 2.85: - 5-8-8 - 6-8-8 - 8-8-8 - 10-8-8 PROTECHNIKA is a company with a 21-year history, specializing from its inception in the manufacturing of spare parts and complete recycling systems. In recent years, we have expanded our product range to include grinding shafts for slow-speed shredders. Through the implementation of automated welding processes and proprietary production technologies, we have successfully reduced production lead times while maintaining consistently high quality standards. Grinding shafts are a serial product, which also allows us to collaborate with machine manufacturers on an OEM basis. Lajdpox Hhwdsfx Amvsg What sets PROTECHNIKA apart from the competition? The answer is simple: - Certified 3.1 materials - TUV SUD Rheinland quality assurance - ISO 9001 certification - Automated welding processes / ISO 15613 / ISO 15614 - Welders certified to ISO 9606-1 - ISO 9001:2015 - ISO 14001 - Independent design department able to fulfil any customer-specific requirements - In-house Research and Development Centre Building long-term customer relationships is our top priority, as your satisfaction is our success!

Condition: used, B&R X20 CP 3586 IF 2772 DI 9371 DO 9322 RA2038 Manufacturer: B&R Industrial Automation Components: Lodpfxjk Abwle Amvoag 1x X20 CP 3586 3x X20 IF 2772 2x X20 DI 9371 1x X20 DO 9322 Intel ATOM 1.6 GHz with additional I/O processor Ethernet, POWERLINK with Poll Response Chaining and USB on board 3 slots for modular interface expansion CompactFlash as exchangeable program memory 512 MByte DDR2 SDRAM main memory Controller redundancy possible Fanless Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany

Condition: good (used), WSM Stationary Screwing Unit Assembly and testing of components for car radios and navigation systems. The assembly station is enclosed in a protective housing. The service doors are equipped with monitoring switches with interlocks. The doors are locked during automatic operation and can only be opened during automatic stop or manually after pressing the "Doors" button on the control panel. Automatic operation cannot be started with a door open. Operational Sequence The station is loaded with the pre-assembled component via the transfer belt. The following describes the operation steps of the automatic station with a transfer belt. In normal operation, all three stations operate in parallel. - Positioning the test unit (WT) with the pre-assembled module in station 2.1 - Lowering the carrier with the scanner and vision sensor - Scanning the 3 codes (front panel, front PCB, SD PCB), comparison with the database - Checking the correct locking of the FFC in the connector - Raising the carrier and lowering the test unit onto the conveyor belt - Positioning the test unit (WT) with the pre-assembled module in station 2.2 - Positioning the screwdriver and screwing the front PCB in place - Lowering the test unit (WT) onto the conveyor belt - Positioning the test unit (WT) with the pre-assembled module in station 2.3 - Lowering the light shield and making contacts, adjusting the carrier with the test sensors from below - Type-dependent testing of the SD + CD slot lighting and buttons - Functional test of the CD eject button - Lowering the test unit (WT) onto the conveyor belt > continue Ljdpfxsibichj Amveag If errors occur during testing, they are displayed on the screen. and can be repaired if possible. For this, the system is switched to manual operation and the doors are opened. After the repair and restarting the automatic system, the workpiece carrier is tested again in the station. If a repair is not possible (e.g., due to a screw error), the workpiece carrier is marked as NIO (Not Okay) in the control system and is not processed further. Manual NIO marking and rejection is also possible. Financing through our bank is also available. komplett-konzept.leasingo.de More assembly stations, new and used, can be found in our shop! International shipping costs on request!

Condition: good (used), Indumat THO 310 Automated Guided Vehicle (AGV) A robust, industrial automated guided vehicle (AGV) from the proven system portfolio of INDUMAT and E&K Automation. The vehicle combines Indumat’s extremely solid and durable mechanical engineering with the flexible control technology of the TELETRAK MULTI series. The unit is ideally suited as a source of spare parts, for retrofit projects, for automating internal facility processes, or for expanding existing systems. Technical Data (according to nameplate): Manufacturer (Mechanical): INDUMAT GmbH & Co. KG (Reutlingen) Laedezkqdxopfx Amveg Control System / Brand: E&K Automation TELETRAK MULTI Model / Type: THO 310 Unit No.: 9930 92 26844 Year of Manufacture: 03/1993 Load Capacity: 1000 kg Dead Weight (without battery): 2720 kg Nominal Battery Voltage: 48 V Equipment & Components: The vehicles were subsequently upgraded with modern touch-display controls and are in good, clean condition. These vehicles are constructed using high-value, sought-after industrial components of OEM quality. Professional Safety Laser Scanners: High-end sensors for personnel and obstacle detection. Load Handling Device: Integrated, powered roller conveyor featuring three flanged guide rollers for the automatic, centered pickup and transfer of specific load carriers (e.g., pallets or special racks). Control & HMI: Side-mounted control panel featuring a display, key switch, function buttons, indicator lights, and a connection port for a wired handheld control unit. Safety Features: Easily accessible emergency stop switch; Cutouts in the bumper area for optical pedestrian protection scanners (e.g., SICK laser scanners) or mechanical safety edges. Control cabinet: Spacious electronics compartment for the central control system, located in the upper housing section and accessible via lockable double doors. "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find more items—both new and used—in our shop! International shipping costs available upon request!

Condition: new, SHAFTS DEDICATED FOR HAMMEL VB 850. ALSO AVAILABLE WITH SIDE COMBS Lsdpfex Hhfzox Amvoag PROTECHNIKA is a company with 21 years of history and, since the start of its operations, has been engaged in the production of spare parts and complete recycling lines. In recent years, we have expanded our portfolio to include the production of grinding shafts for slow-speed shredders. By implementing automated welding processes and developing our own manufacturing technology, we have minimized production times while maintaining consistent, high quality. Grinding shafts are a series-produced product, which, among other advantages, enables us to cooperate with machine manufacturers on an OEM basis. What sets PROTECHNIKA apart from the competition? It's simple! - Certified 3.1 materials - TUV SUD Rheinland quality - ISO 9001 - Automated welding process / ISO 15613 / ISO 15614 - ISO 9606-1 welder qualifications - ISO 9001:2015 - ISO 14001 - Independent design department capable of fulfilling any customer requirements - Our own RESEARCH AND DEVELOPMENT CENTRE Customer relations are of paramount importance to us, because their satisfaction is our success!

Condition: new, We would like to offer shafts dedicated for HAAS 2000XL, 1500, and TEREX TDS 820 machines, equipped with side combs and a breaking bar. -4-7-7 -4-9-9 PROTECHNIKA is a company with 21 years of history and from the very outset has specialized in the production of spare parts and complete recycling lines. In recent years, we have expanded our product portfolio to include the manufacturing of grinding shafts for slow-speed shredders. Through the implementation of automated welding processes and proprietary production technologies, we have significantly reduced lead times while maintaining consistently high quality. Grinding shafts are a series product, which, among other things, enables us to collaborate with machine manufacturers as an OEM supplier. What distinguishes PROTECHNIKA from the competition? It's simple! - Certified 3.1 materials - TUV SUD Rheinland-certified quality - ISO 9001 - Automated welding process / ISO 15613 / ISO 15614 compliant Lasdpfsx Hhuijx Amvog - Welders certified to ISO 9606-1 - ISO 9001:2015 - ISO 14001 - In-house design department capable of meeting any customer requirements - Our own RESEARCH AND DEVELOPMENT CENTER Customer relations are of paramount importance to us, as their satisfaction is our success!

Year of construction: 2023, operating hours: 10 h, condition: new, functionality: fully functional, Here we offer a machine that was specially developed for fixing loose or cracked branches. The branches are automatically recognized as they pass through and fixed with hot melt adhesive. This significantly reduces waste due to branch branches. With opaque painted surfaces, the branch becomes almost invisible. Ljdpepiufwefx Amvsag Net Automation sets the standard with the AELA XKI new technological standards in the Diagnosis and correction of wood characteristics. • greatly reduced throughput times • immediate further processing possible • Visual enhancement • Easiest operation DIAGNOSIS AND CORRECTION • Rotten branches • torn branches • Resin galls • Wing branches etc. ..... ..... ADVANTAGES • no tear-outs when planing • Detection of dirt and slatted marks • Diagnosis with artificial intelligence (AI) • automated vaccination process The system can be viewed and tested by arrangement in 77866 Rheinau.

Condition: like new (used), Year of construction: 2023, operating hours: 12,147 h, functionality: fully functional, spindle motor power: 3,700 W, spindle speed (max.): 10,000 rpm, type of input current: three-phase, input voltage: 380 V, Equipment: documentation/manual, Citizen A20-3F7 + FMB Minimag 20 bar FEEDER Year: 2023 7 axes: X1, X2, Y1, Z1, Z2, C1, C2 Removable guide bushing: can be used in both Swiss-type (sliding headstock) and fixed-headstock configurations. Maximum main spindle speed: 10,000 rpm Machining length: 200 mm X2 axis with linear guides Simultaneous C-axis control on both the main and sub-spindle, with back-working driven tools Short cycle times thanks to the advanced CNC control (Fanuc FS32i) Maximum machining diameter: 20 mm (standard) Machining length per chucking: 200 mm, or 2.5 × D in fixed-headstock mode Main spindle: 10,000 rpm, 3.7 kW Sub-spindle: 8,000 rpm, 1.5 kW Gang-type driven tools: 6,000 rpm, 0.75 kW Back-working driven tools: 6,000 rpm, 0.75 kW Compact footprint: approx. 2.5 m² Polygon turning function Equipped with an FMB Minimag 20 bar feeder. Ledpfx Amoz D Tx Njvoag

Condition: used, Year of construction: 2013, operating hours: 28,500 h, load capacity: 235 kg, arm reach: 2,550 mm, load center: 300 mm, torque: 1,324 Nm, positioning accuracy: 0.07 mm, For sale is a machinery package consisting of 10 robot arms from the manufacturer ABB, along with the necessary accessories! The package is composed as follows: 8x Welding robots for external connection 2x Handling robots 10x Control cabinet 10x Main power cable for robot cabinet 10x Communication cable for robot cabinet 10x Panel with connection cable to the cabinet 1x 40" HC sea container TECHNICAL DETAILS Reach: 2.55 m Handling capacity: 235 kg Center of gravity of the payload: 300 mm Wrist torque: 1,324 Nm Positional repeatability: 0.07 mm Path repeatability: 0.7 mm Lodpfx Amsz D H Hyovsag MACHINE DETAILS Control cabinet type: IRC5 M2004 Operating panel: FlexPendant Operating panel model: DSQC 679 Input voltage: 3 × 400 V AC Frequency: 50–60 Hz Current consumption: 20 A Operating hours: between 28,500 and 39,000 hours EQUIPMENT Cable set for main connection cabinet–robot Leoni mounting Cable set for handling or welding Note regarding dismantling and loading: As can be seen in the pictures, the manipulators are located in the 40" HC container. The robots are screwed onto the pallets (with 2 screws each), and the control cabinet is secured to the pallet with lashing straps. Further securing/lashing must be carried out by the buyer.

Condition: good (used), Year of construction: 1994, large shredder, ideal for pallets or waste wood rotor width 1200 mm Laedpfx Ajz D Sk Rjmvsg motor 30 kW with hydraulic pusher

Condition: used, functionality: fully functional, Year of construction: 2015, machine/vehicle number: 75E-E188, USED SHRED-TECH DUAL SHAFT 80HP (TWIN 40) SHREDDER MODEL ST-75ES MANUFACUTRED 2015 TWIN 40 HP MOTORS DUTTING CHAMBER OF 956mm/37" X 635mm/25" Lasdpfx Amexmthrjvjg DISCHARGE HEIGHT 1,067mm/42" THIS WAS USED IN A PLASTICS COMPANY TO SHRED PLASTICS, CARDBOARD AND LIGHT GUAGE METAL. IT IS IN VERY GOOD CONDITION, PURCHASED DUE TO A PLANT CLOSURE. IT IS CURRENTLY LOCATED IN OUR WISCONSIN WAREHOUSE.

Condition: good (used), Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, control, converter, controller -Manufacturer: Power Automation, Servo Controller -Type: MI305 -Dimensions: 300/115/H250 mm -Weight: 3.8 kg/piece Ljdpfjwt Rzlsx Amveag

Year of construction: 2011, condition: ready for operation (used), An automated pallet handling system DMG Mori for machining centers is available. Pallet positions: 7, max. workpiece weight: 250kg, max. workpiece diameter: 500mm, max. workpiece height: 400mm, pallet change time: under 40s. Documentation available. An on site inspection is possible. Ljdoydd Acopfx Amvsag

Condition: used, Year of construction: 2012, functionality: fully functional, Typical Applications: - Pulled meat and poultry production - Ready meal and prepared food lines Features: - Continuous flow design for consistent output - Fiber pulling action (not cutting or tearing) for natural texture - Stainless steel construction with easy-to-clean access - Safety interlocks and easy washdown design - Compact footprint for seamless integration Make: Cove Model: SH-5 Ljdjx Akcrepfx Amvsag Made in USA Capacity: 794 kg/hr Hopper Feeder Height (mm): 1900 Hopper Opening (mm): 450 x 380 Throat Opening (mm): 270 x 220 Throat/Chute (mm): 970 Discharge Height (mm): 700 Overall Dimensions: 1000 L x 630 W x 1900 H Weight: approx. 113 kg YouTube video: factory video, similar machine, not this exact unit!

Condition: good (used), CNC control, control rack, electronic module -Manufacturer: Power Automation / Innovance Technology, Control -Type: Replacement device ArtNo. 181998 -Individual components: see photos -Dimensions: 255/330/H140 mm Lasdowt R Irepfx Amvsg -Weight: 5.7 kg

Condition: used, Year of construction: 2013, operating hours: 28,500 h, load capacity: 235 kg, arm reach: 2,550 mm, load center: 300 mm, torque: 1,324 Nm, positioning accuracy: 0.07 mm, LOT scope: 3x welding robots for external connection 2x handling robots 5x control cabinets 5x main power cable for robot cabinet 5x communication cable for robot cabinet 5x panel with supply line to the cabinet Operating hours: between 28,500 and 39,000 hours Manufacturer: ABB Model: IRB 6640-235/2.55 Type: IRB 6640 M2004 Lasdpfx Asz D H Dremvjg Reach: 2.55 m Handling capacity: 235 kg Center of gravity of payload: 300 mm Wrist torque: 1324 Nm Positional repeatability: 0.07 mm Path repeatability: 0.7 mm 3x 400V AC 50-60 Hz 20 A Accessories: Control cabinet: Type: IRC5 M2004 Operating panel: FlexPendant Model: DSQC 679 Cable set: Main connection cabinet to robot Leoni add-on: Cable set for handling or welding