Used Emulsifier for sale (45)

Condition: excellent (used), Inotec emulsifier, type: I175CD-75DVZ, 400 V, 3 Ph, 50 Hz, 182 A, 111 kW, plate diameter: 175 mm, total dimension: 1850 mm x 1200 mm x 2785 mm, dimensions switch cabinet: 600 mm x 1250 mm x 2350 mm. Nedpepcdgpsfx Ahfjwk

Condition: new, Year of construction: 2026, CORMAK TSC630 Planer Knife Sharpener is a precise and efficient machine designed for sharpening planer knives, chipper knives, shredder knives, and other machine blades used in woodworking, sawmills, and industrial production facilities. Thanks to its ability to sharpen knives up to 630 mm in length, this model is an excellent solution wherever accuracy, repeatability, and fast tool restoration are essential. Dull knives result in poorer machining quality, increased machine load, and unnecessary downtime. The CORMAK TSC630 quickly restores the perfect sharpness of machine knives, ensuring high-quality grinding results and full control over the sharpening process. Nwedpfszwk D Sjx Ahfsk Main advantages of the machine Sharpening knives up to 630 mm – suitable for most standard planer knives and machine blades within this length range. Liquid cooling system – effectively removes heat generated during grinding, protecting the cutting edge from overheating. Adjustable sharpening angle 0–90° – allows precise adjustment according to the knife type and required cutting geometry. Smooth manual feed system – linear bearing guides ensure stable and precise movement of the grinding assembly. Adjustable clamps and stops – enable quick and repeatable positioning of the knife. Ability to sharpen several thin knives at once – stacking blocks allow simultaneous sharpening of planer knives with a thickness of 3 mm. Smooth grinding wheel height adjustment – allows accurate positioning of the grinding wheel relative to the sharpened knife. Collection tank with drain opening – enables collection and reuse of the coolant. Construction and technology The CORMAK TSC630 sharpener has been designed for users who require a stable, accurate, and convenient machine for daily knife sharpening operations. The grinding assembly moves along precision linear guides equipped with linear bearings, ensuring smooth movement of the grinding wheel across the entire length of the blade. This solution provides a uniform grinding process without the risk of uneven sharpening and allows full control over the sharpening operation, even when working with longer knives. Perfectly sharp knives without overheating the cutting edge Temperature control is one of the most important factors during sharpening. The integrated liquid cooling system effectively removes heat generated during grinding, protecting the material from overheating and loss of cutting properties. Thanks to the cooling system, sharpened knives maintain the correct geometry, retain sharpness for longer, and ensure high-quality performance after being installed back into the machine. Standard equipment CORMAK TSC630 knife sharpener Corundum grinding wheel Built-in cooling system Coolant collection tank with drain opening Blocks for simultaneous sharpening of several thin knives Adjustable clamps and stops Mounting elements 2 grinding wheels included 1 L of ES12 emulsifying oil User manual Technical specifications Parameter Value Motor power 1.1 kW Power supply 230 V Maximum knife length up to 630 mm Maximum knife width up to 150 mm Maximum knife thickness up to 30 mm Grinding wheel speed 2800 rpm Grinding wheel diameter / height 100 / 51 mm Grinding wheel thickness 13 mm Sharpening angle 0–90° Cooling system Yes Feed type Manual, with linear bearings Machine dimensions 1000 × 465 × 610 mm Weight 55 kg

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 101-00886, overall weight: 750 kg, hopper volume: 240 l, production capacity: 4,000 unit/h, TECHNICAL DETAILS Hopper volume: 240 liters Capacity: 4,000 kg/h MACHINE DETAILS Weight: 750 kg Motor power: 75 kW Power consumption: 142 amperes EQUIPMENT Nwjdpfexrt Dwex Ahfok Accessories as shown in the pictures

Condition: used, Year of construction: 1983, Manufacturer : Moritz Year : 1983 Type : Vacuum mixer Emulsifying motor: 3000 rpm – 3 kW Volume : 50L Vertical stainless steel tank: Diameter 400 mm / Depth: 450 mm Jacketed Total draining 2 variable-speed agitators on the lid Njdpfxjy E T Swe Ahfjwk - 2 three-bladed propellers: 0 to 200 rpm - Anchor with scrapers: 0 to 100 rpm Two-speed bottom-mounted turbo emulsifier with recirculation Built-in vacuum pump Electrical cabinet A hot water unit is available on request; this request may be subject to a separate quotation.

Condition: used, We offer a used KARL SCHNELL 119 FD 225 D emulsifier – an industrial machine designed for continuous cutting, emulsifying, homogenizing and grinding of food products. The machine is suitable for meat processing plants, fish processing plants, production of fillings, pâtés, sauces, pastes, delicatessen products and convenience food. The KARL SCHNELL 119 FD 225 D belongs to the FD series of inline emulsifiers. Machines of this type are used wherever a very fine, uniform and stable product structure is required. The FD series is designed for high-quality emulsification and can be adapted with suitable cutting tools and drive configurations depending on the processed product. The heart of KARL SCHNELL emulsifiers is the KS cutting system, which enables intensive product size reduction in a continuous process. Depending on the application, this type of machine can operate with different cutting tool configurations, including knife systems with perforated plates. This allows the machine to be adapted to products with different structures, viscosity and technological requirements. The inline cutter operates continuously – the product is fed into the working chamber, passes through the cutting system and is discharged as a finely cut or emulsified mass. This solution helps increase production efficiency, reduce manual work and achieve repeatable product quality in subsequent batches. Njdpfx Aszi U Rmohfswk The machine can be used as a standalone unit or as part of a larger technological line, for example after preliminary grinding, mixing or bowl cutting. The KARL SCHNELL 119 FD 225 D is a good solution for plants looking for an efficient inline emulsifier for industrial food production. Technical data: Manufacturer: KARL SCHNELL Model: 119 FD 225 D Machine type: emulsifier Power: 74 kW / 100 HP Power supply: 400 V Frequency: 50 Hz Motor speed: 2975 rpm Control cabinet operating voltage: 3 × 400 V / 50 Hz Control voltage: 230 V AC Construction: stainless steel Application: cutting, homogenization and emulsification of food product Main advantages: continuous inline operation high power of 74 kW motor speed 2975 rpm intensive cutting and emulsification of product possibility of obtaining a fine and homogeneous mass structure suitable for fillings, emulsions, pâtés, sauces and pastes can operate as a standalone machine or as part of a technological line solid industrial construction stainless steel construction renowned manufacturer KARL SCHNELL solution for continuous production in food processing plants

Condition: used, Applicable material: Concrete Cargo space capacity: 60.000 l Polygonmach PVB150 Mobile Cold Asphalt & Emulsion Mixing Plant Turkey’s First Fully Mobile Dual-Mode Plant! Polygonmach PVB150 is a cutting-edge mobile solution specially designed for cold asphalt production, emulsion-based mixes, and road maintenance materials. This powerful system supports Volumetric and Batch operation modes — all in one compact and mobile unit. Whether you’re building rural roads, patching highways, or producing environmentally friendly mixes, the PVB150 delivers performance, flexibility, and cost savings directly to your jobsite. ⸻ ✅ Specialized for Cold Mix & Emulsion Applications • Cold Asphalt Mixing Mode: Up to 200 m³/hour on-demand production, perfect for binderless and emulsion-stabilized mixes • Emulsion Mixing Mode: Precise control for polymer-modified bitumen and emulsified asphalt blends • Low-Temperature Operation: Energy-efficient and ideal for off-grid, rural, or urban environments • Recycling-Ready: Supports RAP (recycled asphalt pavement) and eco-friendly binder integration ⸻ ? Advanced Design – Built for Road Projects • 3x8 m³ aggregate hoppers, 5-ton cement/emulsion silo, and integrated water/additive tanks • High-precision weighing & dosing for binder, aggregate, and water • Fully automatic or manual operation via smart control panel • Mobile frame with self-lifting chassis – set up in 10 minutes • On-site production = zero material waste, no transportation delays Nwedpfxoykad Aj Ahfsk ⸻ ?️ Multiple Functions – One Mobile Solution In addition to Cold Asphalt and Emulsion, PVB150 can also operate as: • Mechanical Stabilization Plant • Soil Compound Mixing Plant • Standard Concrete Plant (Volumetric + Batch Modes) ⸻ ? Mobile | Sustainable | High-Performance | Made in Turkey Say goodbye to fixed-site plants and expensive transport. With Polygonmach PVB150, your site becomes your plant. ⸻ ? Contact us today and take control of your road projects! ? ? ?

Condition: used, Year of construction: 1992, In-line Stephan Microcutter unit with Edak centrifugal pre-filter.   Manufacturer: Stephan Mikrocut Model : MCH 20 P Type : In-line Cutter / emulsifier Year : 1992 Power : 15 KW Intensity : 23 A Speed : 2925 RPM Production : 3000 l/h Nwedpjx R Appjfx Ahfek Rotor stator : single stage   Manufacturer : EDAK Model KSF 65 RH Type: centrifugal filter Year : 1999 Material: Stainless steel Double jacket Rotor Ø 150 x 350 mm

Condition: ready for operation (used), functionality: fully functional, The Stephan VM.MC.600.20 cutter is designed for high-capacity processing facilities that are looking for an efficient solution for chopping, mixing, and emulsifying food products. It ensures homogeneous and controlled processing, which helps maintain consistent quality with high volumes. As a result, recipes remain reproducible, and manufacturing variations are reduced. Furthermore, the Stephan design guarantees high process stability, even in demanding applications. This cutter integrates into structured industrial lines, as its architecture is designed for continuous operation. In addition, the large-volume tank allows for processing significant batches while maintaining high precision. Moreover, the powerful motor ensures effective cutting action, which improves the final texture of the products. Therefore, productivity increases without compromising quality. The stainless steel construction facilitates compliance with hygiene requirements and daily maintenance. As a result, cleaning operations are performed more quickly, and downtime is limited. Furthermore, speed control allows the operation to be adapted to different types of preparations. Consequently, this cutter meets the needs of versatile workshops focused on performance and consistency. Offered as a used unit by Europ’Équipement, the Stephan VM.MC.600.20 cutter is inspected before being put back into service. This ensures that the user has a machine that is ready to be integrated into their production line. Moreover, purchasing used equipment allows for cost control while maintaining a high level of performance. Therefore, this cutter is a relevant choice for securing the industrial process on a large scale. Technical specifications: Tank capacity: 600 L Batch capacity: approximately 150 to 400 kg Dimensions (L × W × H): ≈ 3,200 × 2,400 × 2,800 mm Machine weight: ≈ 3,500 to 4,000 kg Maximum operating temperature: 95 °C Electrical supply: 400 V – three-phase – 50 Hz Motor: high power, multi-speed Year of manufacture: 1994 Nsdpfx Ahjx Hyp Ssfjwk

Condition: used, General Overview Pasteurising, cooling, chilling, curing, emulsifying, reconstituting, incubating and mixing are all processes essential in the food processing laboratory. The Armfield Multi-Purpose Processing Vessel is capable of carrying out all of these functions as a self-contained,mobile unit. Its mobility allows it to be positioned in the laboratory adjacent to other equipment that it may be acting as a service to, and also makes it easily stowable. The hygienically designed jacketed vessel has a working capacity of between 10 and 15 litres which allows experimentation and demonstrations without the need for large quantities of raw materials. An electrical heating element positioned at the base of the jacket heats water in the jacket which in turn heats the contents of the vessel. This method gives a gentle Nwedpfoydh Agox Ahfsk transfer of heat to ingredients that are often heat sensitive and local 'hot spots' are avoided due to the convective distribution of the heat. Cooling is accomplished by simply metering water from a domestic supply through the jacket. Chilling involves the circulation of chilled water in a closed circuit through an ice bank circulator incorporated in the base of the unit. An emulsifier having a variable speed drive and several options of emulsor head can be lowered into the process fluid. Hands-on experience can be gained by students and full instrumentation allows a complete record of the process to be compiled. An automatic valve changeover system enables uncomplicated operation requiring the student/trainee to simply select the particular process required rather than have to operate an array of manual valves. Description Where necessary, refer to the drawings in Equipment Diagrams section 8. 9.1 Overview The stainless steel jacketed vessel (1) has a polished, hygienic finish and a working capacity of between 10 and 15 litres. Its contents are heated indirectly by cartridge heater (16) in the base of the jacket. The heater is protected from over-temperature by a thermostat (17) adjacent to it. An emulsifier (2) can be lowered into or raised out of the vessel using the locking handle (5). The on/off and variable speed control (14) of this unit are situated on the motor housing and not on the control console. A green running light (7) indicates when the emulsor motor is switched on. The emulsor head (3) can easily be interchanged with any of the alternatives supplied by simply removing the finger-nuts securing the head to the drive shaft. A lid (6) is provided to prevent any airborne contamination during long periods of heat treatment. Chilled water is circulated from an ice bank unit (12) situated beneath the processing vessel. After a period of time required to build up an ice bank, this will provide chilled water to the vessel jacket, cooling the contents to a temperature suitable for storage/curing. The ice bank is usually used after an initial rapid cooling by circulating cold water from a domestic supply. 3-way valves (10) and (11) are used to automatically select either open circuit domestic supply cooling or closed circuit chilled water cooling. In both cases the water passes through a flowmeter (13) where the flow rate can be adjusted manually by control valve (14). From the flowmeter, the water enters the base of the vessel jacket after passing through an in-line non-return valve (15). The water leaves the jacket diagonally opposite the inlet, at the top of the vessel. A pressure relief valve is incorpor...

Condition: used, Year of construction: 1993, // currently being renovated in our workshops //   Manufacturer : Haagen & Rinau Model : Unimix SRM 200 Year : 1993 Type: vacuum mixer   Material : stainless steel   Vessel capacity: 406 L Maximum temperature: 143°C Pressure: – 1 / 3 bars   Double jacket capacity: 34 L Maximum temperature: 151°C Pressure: 4 bars   Slow mixing : Central stirring + scrapers. Fixed counter action Power: 7,5 KW Fast mixing: emulsifier at the bottom of the tank. Suction and recirculation of the product. Power : 8 / 12 KW   Integrated electrical cabinet. Siemens S5 controller   Hydraulic unit: – Up and down of the cover with its mixing tool – Rotation of the cover with its mixing tool – Tilting of the tank Nwjdpfxjx R Aqas Ahfjk – Up and down of the homogeniser at the bottom of the tank.

Condition: used, Stephan MC12 Microcutter is a compact and efficient machine designed for fine grinding, emulsifying, and homogenizing a wide range of food products. Thanks to its Microcut technology, it delivers highly precise processing and a uniform product structure. Manufactured from high-quality stainless steel, it ensures excellent hygiene standards, easy cleaning, and long-term reliability. Its compact footprint makes it an ideal solution for small and medium-sized production facilities where space optimization is important. The machine is suitable for producing emulsions, pâtés, sausage mixtures, spreads, and other food products that require fine and consistent processing. Technical Specifications Manufacturer: Stephan Model: MC12 Capacity: 40 l Power: 9 kW Power Supply: 400 V / 50 Hz / 3N Nwodpjzgpbzofx Ahfek Processing Capacity: up to 1200 kg/h Cutting Speed: 2900 cuts/min Dimensions (L x W x H): 700 x 630 x 1000 mm Weight: 120 kg

Condition: ready for operation (used), functionality: fully functional, The Alpina PB 90 is a professional-grade bowl cutter designed for industrial meat processing. It is engineered to efficiently chop, mix, and emulsify meat and other food products, making it suitable for large-scale food production environments.​ 🔧 Key Features & Specifications Bowl Capacity: 90 litres Knife Motor Power: 22.0 kW Nedpfx Ajwf Dhiohfjwk Bowl Motor Power: 0.8 kW Knife Speeds: 6 adjustable speeds Bowl Speeds: 2 adjustable speeds Mixing Speeds: 2 adjustable speeds Power Supply: 400 V / 3-phase / 50 Hz Dimensions: Approximately 2100 x 1250 x 1400 mm​

Condition: used, The Alexanderwerk SKN 65 SS is a professional industrial bowl cutter designed for chopping, mixing, and emulsifying meat and other food products. Its 65-liter bowl and six-knife cutting system ensure efficient processing and consistent product quality. Equipped with two knife speeds, the machine offers flexibility for various production requirements. Built entirely from stainless steel, it provides durability, easy cleaning, and excellent hygiene standards. Technical Specifications: Manufacturer: Alexanderwerk Model: SKN 65 SS Type: Bowl Cutter Bowl Capacity: 65 l Number of Knives: 6 Knife Speeds: 1500 / 3000 rpm Number of Speed Settings: 2 Njdpozd E Hujfx Ahfjwk Bowl Material: Stainless Steel Construction Material: Stainless Steel Power Supply: 400 V / 50 Hz / 3N Dimensions: 1400 x 900 x 1350 mm Application: Meat processing, sausage production, pâtés, fillings, and various food products

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, Kilia 65 l | Meat/Bowl Cutter Nodpfsy Tza Ejx Ahfewk Manufacturer: KILIA Fleischereimaschinenfabrik Fritz Reimers GmbH u. Co. KG Type: 65 Machine Number: 89413239 Year of Manufacture: 1994 Bowl Capacity: 65 liters Rated Power: 22 kW Rated Current: 51 A Supply Voltage: 400 V Frequency: 50 Hz Current Protection: 63 Amp. slow-blow The Kilia 65 is a professional, compact bowl cutter of German manufacture, designed for use in meat processing plants, artisan butcheries, and industrial kitchens. The device is used for chopping, mixing, and emulsifying meat and vegetable ingredients, making it a key component in the production of fillings for sausages, pâtés, finely ground processed meats, and all types of culinary preparations. Thanks to its powerful 22 kW motor, the cutter easily handles the intensive chopping of even well-chilled or sinewy raw materials. - Advanced bowl drive: The device is equipped with two bowl speed settings and a function to change the direction of rotation (forward and reverse operation), allowing for optimal adjustment of process parameters to the type and structure of the filling being prepared. - Robust construction: The housing and body are made of high-quality materials that are resistant to corrosion and meet the strict sanitary and hygienic standards of the food industry. - High efficiency: The optimal ratio of bowl capacity (65 liters) to engine power (22 kW) ensures rapid and precise cutting without overheating the filling. - Durability: Kilia machines from the 1990s are known for their extremely durable mechanics and simple, reliable electrical systems, which facilitate day-to-day operation and maintenance.

Condition: new, Unused Briggs of Burton approximately 1,200 litre 316/316L stainless steel process vessel. Unit measures approximately 1,200mm diameter x 870mm straight side. Unit has bolted dished top and welded hemispherical bottom head. Internal rated 10 bar/full vacuum design pressure at -20 to 210 deg.c. External 304/304L stainless steel jacketed rated 10 bar/full vacuum design pressure at -20 to 210 deg.c. Unit has top entry 316/316L stainless steel gate type agitator fitted with PTFE wall scrappers, driven by 11kw motor/gearbox. Unit includes bottom entry Silverson model BE600 316/316L stainless steel emulsifier driven by 22kw motor. Unit is mounted on 304/304L stainless steel legs. Specifications: Power: 11 kW Nodpfx Aheyhd Imofewk

Condition: excellent (used), Urschel comitrol 3600 emulsifier Nwedpfx Ahjuy Ttcefek

Condition: ready for operation (used), Year of construction: 1983, operating hours: 50,000 h, functionality: fully functional, operating pressure: 200 bar, overall weight: 33,000 kg, pressing force: 1,000 t, stroke length: 650 mm, travel speed (max.): 3,600 mm/min, TECHNICAL DETAILS Pressing force: 1,000 t Clamping force of the core plates: 30 t Travel speed: approx. 60 mm/s Operating pressure: 200 bar Stroke of the movable plate: 650 mm Stroke of the mold holder plate (towards operator): 980 mm Heating Plates and Heating System Heating plate size: 1,000 mm x 1,000 mm Nodpfey Hhqdjx Ahfewk Number of heating plates: 7 Number of openings: 6 Opening dimension per opening: approx. 108 mm Specific pressure on plates: 100 kg/cm² Hydraulics and Power Units Hydraulic pump power: 9 kW Oil dynamic pump power: 11 kW Installed electrical power: 21.5 kW Hydraulic oil capacity: approx. 160 l Operating Fluids Amount of hydraulic fluid emulsified with water and 5% CIL-SOLIOIL-BK oil: approx. 1,300 l Nitrogen bottles (each 60 l at 200 atm) for accumulator pre-charging: approx. 10 MACHINE DETAILS Weights Weight of the press: 33 t Weight of hydraulic power unit: 0.4 t Weight of pump and accumulator: 1.9 t Weight of electrical unit: 0.2 t Total delivery weight: 35.5 t FEATURES Heating system with saturated steam Electrohydraulic power control device Electrovalve air venting system

Year of construction: 2025, condition: new, functionality: fully functional, NFM L200IV 200L universal mixer Nwodpevw Ug Uofx Ahfjk Model L200IV Cutter / Mixer / Homogenizer is following the footsteps of our experience in the industrial food processing equipment for producers of consumer products worldwide. Integrating our patents and knowledge; we created a machine with industrial capacity and durability with the ease of use of a counter-top appliance. The L200IV allows our customers to increase process capacity without increasing labour needs. Only one person is enough to operate this machine regardless of body-power. The tilting of the bowl and opening-closing of the cover is fully motorized and works automatically. The machine is operated via a hybrid control panel, offering water-proof metal buttons and a control screen. The timer, the variable speed function, the optional reverse revolving function, the cover and tilting mechanism controls are all integrated into this panel. There is a custom designed stair to reach the feeding level of the bowl and control the operation. The optional motorized scraper works automatically. The scraper shortens operation times, and increases productivity. Operator safety is at maximum. The Cutter machine does not start if it does not detect the bowl or the cover in place. There are multiple systems, to ensure safety and avoid mechanical problems. Besides these, there are multiple systems to avoid overloading of the motor units of the machine. All these systems ensure protection against abusive use and overload, protecting your investment for years to come. The high-level discharge height is designed for standard Euro-bin (200 Liters) containers. Please ask your sales consultant for an optional custom made tilter for loading the machine, instead of manual loading using the custom designed stairs. Vacuum option for the process bowl is available. Vacuum pump is completely integrated inside the machine construction, concealed and hygienic. The control of the vacuum function is fully integrated in the machine’s automation systems for full control of recipes and automatic operation of the machine. Power 22Kw, 600-3000RPM, removable bowl, dishwasher safe, ideal for cutting, mixing homogenizing, grinding, chopping, emulsifying, products such as hummus, sauces, soups, pastes, pates, purees, and more, 3Ph

Condition: new, Year of construction: 2026, Highly efficient series production Clamp – enter the cutting dimension – start. Automatic saws with loading are a standard of rational series processing of bar and bundle material. Cutting area max. up to 290 x 320 mm. Furnishing Automatic hydraulic sawing machine with NC control for cutting from 0° to 60° right, complying with all CE safety standards The device has 9 programs, each of which composed of 99 individual steps, with a total number of approx. 890 cutting positions, with corresponding piece counter Function: material feed closing fixed vice Blade rotation, distribution of emulsifiable liquid, temple lowering until the end of the cut and return of the feed carriage until specified amount bail return and stop the blade rotation by cooling liquid distribution cycle repetition Hydraulic feed cut by cut with no length limit Numerical control of quantity and length of cut Hydraulic control center with cutting pressure adjustment The saw blade is tensioned electro-mechanically by means of Microswitch monitored. Device with brush for belt cleaning Bimetallic strip 3200 x 27 x 0.9 mm Section thickness 1.2 mm Material feed stroke 600 mm Motor hydraulic center 0.75 kW Electric pump 0.09 kW to cool the belt It is always possible for you to inspect the desired system in our production/demonstration hall. Nedpfxofww Sqe Ahfswk Please do not hesitate to contact us.

Year of construction: 2023, condition: new, functionality: fully functional, You can view this machine at the Anuga Tec Cologne until March 22nd. Hall 8, Stand B 079, PVS. Chopping and emulsifying machine for various products, such as meat, sauces, and soups. Also suitable for pesto, ketchup, and mayonnaise. Re-work applications (baked goods and other products). Nut pastes. Pharmaceutical applications (in heparin production). Njdpfx Ahoivikxsfowk